From: "H.J. Lu" <hjl.tools@gmail.com>
To: libc-alpha@sourceware.org
Subject: [PATCH v8 5/6] Add --disable-default-dt-relr
Date: Wed, 13 Apr 2022 11:25:06 -0700 [thread overview]
Message-ID: <20220413182507.896862-6-hjl.tools@gmail.com> (raw)
In-Reply-To: <20220413182507.896862-1-hjl.tools@gmail.com>
Enable DT_RELR in glibc shared libraries and position independent
executables (PIE) automatically if linker supports -z pack-relative-relocs.
Also add a new configuration option, --disable-default-dt-relr, to
avoid DT_RELR usage in glibc shared libraries and PIEs.
---
INSTALL | 6 ++++++
Makeconfig | 19 +++++++++++++++++++
Makerules | 2 ++
configure | 18 ++++++++++++++++++
configure.ac | 13 +++++++++++++
elf/Makefile | 4 +++-
manual/install.texi | 5 +++++
7 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/INSTALL b/INSTALL
index 63c022d6b9..4a6506f11f 100644
--- a/INSTALL
+++ b/INSTALL
@@ -133,6 +133,12 @@ if 'CFLAGS' is specified it must enable optimization. For example:
used with the GCC option, -static-pie, which is available with GCC
8 or above, to create static PIE.
+'--disable-default-dt-relr'
+ Don't enable DT_RELR in glibc shared libraries and position
+ independent executables (PIE). By default, DT_RELR is enabled in
+ glibc shared libraries and position independent executables on
+ targets that support it.
+
'--enable-cet'
'--enable-cet=permissive'
Enable Intel Control-flow Enforcement Technology (CET) support.
diff --git a/Makeconfig b/Makeconfig
index 0aa5fb0099..b75f28f837 100644
--- a/Makeconfig
+++ b/Makeconfig
@@ -358,6 +358,23 @@ else
real-static-start-installed-name = $(static-start-installed-name)
endif
+# Linker option to enable and disable DT-RELR.
+ifeq ($(have-dt-relr),yes)
+dt-relr-ldflag = -Wl,-z,pack-relative-relocs
+no-dt-relr-ldflag = -Wl,-z,nopack-relative-relocs
+else
+dt-relr-ldflag =
+no-dt-relr-ldflag =
+endif
+
+# Default linker option for DT-RELR.
+ifeq (yes,$(build-dt-relr-default))
+default-rt-relr-ldflag = $(dt-relr-ldflag)
+else
+default-rt-relr-ldflag = $(no-dt-relr-ldflag)
+endif
+LDFLAGS-rtld += $(default-rt-relr-ldflag)
+
relro-LDFLAGS = -Wl,-z,relro
LDFLAGS.so += $(relro-LDFLAGS)
LDFLAGS-rtld += $(relro-LDFLAGS)
@@ -413,6 +430,7 @@ link-extra-libs-tests = $(libsupport)
# Command for linking PIE programs with the C library.
ifndef +link-pie
+link-pie-before-inputs = $(if $($(@F)-no-pie),$(no-pie-ldflag),-pie) \
+ $(if $($(@F)-no-dt-relr),$(no-dt-relr-ldflag),$(default-rt-relr-ldflag)) \
-Wl,-O1 -nostdlib -nostartfiles \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(relro-LDFLAGS) $(hashstyle-LDFLAGS) \
@@ -445,6 +463,7 @@ endif
ifndef +link-static
+link-static-before-inputs = -nostdlib -nostartfiles -static \
$(if $($(@F)-no-pie),$(no-pie-ldflag),$(static-pie-ldflag)) \
+ $(if $($(@F)-no-dt-relr),$(no-dt-relr-ldflag),$(default-rt-relr-ldflag)) \
$(sysdep-LDFLAGS) $(LDFLAGS) $(LDFLAGS-$(@F)) \
$(firstword $(CRT-$(@F)) $(csu-objpfx)$(real-static-start-installed-name)) \
$(+preinit) $(+prectorT)
diff --git a/Makerules b/Makerules
index 428464f092..7c1da551bf 100644
--- a/Makerules
+++ b/Makerules
@@ -536,6 +536,7 @@ lib%.so: lib%_pic.a $(+preinit) $(+postinit) $(link-libc-deps)
define build-shlib-helper
$(LINK.o) -shared -static-libgcc -Wl,-O1 $(sysdep-LDFLAGS) \
$(if $($(@F)-no-z-defs)$(no-z-defs),,-Wl,-z,defs) $(rtld-LDFLAGS) \
+ $(if $($(@F)-no-dt-relr),$(no-dt-relr-ldflag),$(default-rt-relr-ldflag)) \
$(extra-B-$(@F:lib%.so=%).so) -B$(csu-objpfx) \
$(extra-B-$(@F:lib%.so=%).so) $(load-map-file) \
-Wl,-soname=lib$(libprefix)$(@F:lib%.so=%).so$($(@F)-version) \
@@ -595,6 +596,7 @@ endef
define build-module-helper
$(LINK.o) -shared -static-libgcc $(sysdep-LDFLAGS) $(rtld-LDFLAGS) \
$(if $($(@F)-no-z-defs)$(no-z-defs),,-Wl,-z,defs) \
+ $(if $($(@F)-no-dt-relr),$(no-dt-relr-ldflag),$(default-rt-relr-ldflag)) \
-B$(csu-objpfx) $(load-map-file) \
$(LDFLAGS.so) $(LDFLAGS-$(@F:%.so=%).so) \
$(link-test-modules-rpath-link) \
diff --git a/configure b/configure
index c0c2246597..d230c2c673 100755
--- a/configure
+++ b/configure
@@ -767,6 +767,7 @@ enable_sanity_checks
enable_shared
enable_profile
enable_default_pie
+enable_default_dt_relr
enable_timezone_tools
enable_hardcoded_path_in_tests
enable_hidden_plt
@@ -1424,6 +1425,7 @@ Optional Features:
--enable-profile build profiled library [default=no]
--disable-default-pie Do not build glibc programs and the testsuite as PIE
[default=no]
+ --disable-dt-relr Do not enable DT_RELR in glibc[default=no]
--disable-timezone-tools
do not install timezone tools [default=install]
--enable-hardcoded-path-in-tests
@@ -3440,6 +3442,13 @@ else
default_pie=yes
fi
+# Check whether --enable-default-dt-relr was given.
+if test "${enable_default_dt_relr+set}" = set; then :
+ enableval=$enable_default_dt_relr; default_dt_relr=$enableval
+else
+ default_dt_relr=yes
+fi
+
# Check whether --enable-timezone-tools was given.
if test "${enable_timezone_tools+set}" = set; then :
enableval=$enable_timezone_tools; enable_timezone_tools=$enableval
@@ -7092,6 +7101,15 @@ fi
config_vars="$config_vars
enable-static-pie = $libc_cv_static_pie"
+# Disable build-dt-relr-default if linker does not support it or if glibc
+# is configured with --disable-default-dt-relr.
+build_dt_relr_default=$default_dt_relr
+if test "x$build_dt_relr_default" != xno; then
+ build_dt_relr_default=$libc_cv_dt_relr
+fi
+config_vars="$config_vars
+build-dt-relr-default = $build_dt_relr_default"
+
# Set the `multidir' variable by grabbing the variable from the compiler.
# We do it once and save the result in a generated makefile.
libc_cv_multidir=`${CC-cc} $CFLAGS $CPPFLAGS -print-multi-directory`
diff --git a/configure.ac b/configure.ac
index 66cad71431..1aa152b901 100644
--- a/configure.ac
+++ b/configure.ac
@@ -197,6 +197,11 @@ AC_ARG_ENABLE([default-pie],
[Do not build glibc programs and the testsuite as PIE @<:@default=no@:>@]),
[default_pie=$enableval],
[default_pie=yes])
+AC_ARG_ENABLE([default-dt-relr],
+ AS_HELP_STRING([--disable-dt-relr],
+ [Do not enable DT_RELR in glibc@<:@default=no@:>@]),
+ [default_dt_relr=$enableval],
+ [default_dt_relr=yes])
AC_ARG_ENABLE([timezone-tools],
AS_HELP_STRING([--disable-timezone-tools],
[do not install timezone tools @<:@default=install@:>@]),
@@ -1878,6 +1883,14 @@ if test "$libc_cv_static_pie" = "yes"; then
fi
LIBC_CONFIG_VAR([enable-static-pie], [$libc_cv_static_pie])
+# Disable build-dt-relr-default if linker does not support it or if glibc
+# is configured with --disable-default-dt-relr.
+build_dt_relr_default=$default_dt_relr
+if test "x$build_dt_relr_default" != xno; then
+ build_dt_relr_default=$libc_cv_dt_relr
+fi
+LIBC_CONFIG_VAR([build-dt-relr-default], [$build_dt_relr_default])
+
# Set the `multidir' variable by grabbing the variable from the compiler.
# We do it once and save the result in a generated makefile.
libc_cv_multidir=`${CC-cc} $CFLAGS $CPPFLAGS -print-multi-directory`
diff --git a/elf/Makefile b/elf/Makefile
index 979dde046d..ac6a73ec5e 100644
--- a/elf/Makefile
+++ b/elf/Makefile
@@ -1580,6 +1580,7 @@ $(objpfx)nodlopen2.out: $(objpfx)nodlopenmod2.so
$(objpfx)filtmod1.so: $(objpfx)filtmod1.os $(objpfx)filtmod2.so
$(LINK.o) -shared -o $@ -B$(csu-objpfx) $(LDFLAGS.so) \
+ $(default-rt-relr-ldflag) \
-L$(subst :, -L,$(rpath-link)) \
-Wl,-rpath-link=$(rpath-link) \
$< -Wl,-F,$(objpfx)filtmod2.so
@@ -2379,7 +2380,7 @@ $(objpfx)tst-big-note: $(objpfx)tst-big-note-lib.so
# artificial, large note in tst-big-note-lib.o and invalidate the
# test.
$(objpfx)tst-big-note-lib.so: $(objpfx)tst-big-note-lib.o
- $(LINK.o) -shared -o $@ $(LDFLAGS.so) $<
+ $(LINK.o) -shared -o $@ $(LDFLAGS.so) $(default-rt-relr-ldflag) $<
$(objpfx)tst-unwind-ctor: $(objpfx)tst-unwind-ctor-lib.so
@@ -2685,6 +2686,7 @@ $(objpfx)tst-ro-dynamic: $(objpfx)tst-ro-dynamic-mod.so
$(objpfx)tst-ro-dynamic-mod.so: $(objpfx)tst-ro-dynamic-mod.os \
tst-ro-dynamic-mod.map
$(LINK.o) -nostdlib -nostartfiles -shared -o $@ \
+ $(default-rt-relr-ldflag) \
-Wl,--script=tst-ro-dynamic-mod.map \
$(objpfx)tst-ro-dynamic-mod.os
diff --git a/manual/install.texi b/manual/install.texi
index 29c52f2927..04ea996561 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -161,6 +161,11 @@ and architecture support it, static executables are built as static PIE and the
resulting glibc can be used with the GCC option, -static-pie, which is
available with GCC 8 or above, to create static PIE.
+@item --disable-default-dt-relr
+Don't enable DT_RELR in glibc shared libraries and position independent
+executables (PIE). By default, DT_RELR is enabled in glibc shared
+libraries and position independent executables on targets that support it.
+
@item --enable-cet
@itemx --enable-cet=permissive
Enable Intel Control-flow Enforcement Technology (CET) support. When
--
2.35.1
next prev parent reply other threads:[~2022-04-13 18:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-13 18:25 [PATCH v8 0/6] Support DT_RELR relative relocation format H.J. Lu
2022-04-13 18:25 ` [PATCH v8 1/6] elf: Define DT_RELR related macros and types H.J. Lu
2022-04-13 21:43 ` Fangrui Song
2022-04-13 18:25 ` [PATCH v8 2/6] Add GLIBC_ABI_DT_RELR for DT_RELR support H.J. Lu
2022-04-13 22:16 ` Fangrui Song
2022-04-13 18:25 ` [PATCH v8 3/6] elf: Support DT_RELR relative relocation format [BZ #27924] H.J. Lu
2022-04-13 18:25 ` [PATCH v8 4/6] elf: Properly handle zero DT_RELA/DT_REL values H.J. Lu
2022-04-13 18:25 ` H.J. Lu [this message]
2022-04-13 18:25 ` [PATCH v8 6/6] NEWS: Mention DT_RELR support H.J. Lu
2022-04-13 21:43 ` Fangrui Song
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220413182507.896862-6-hjl.tools@gmail.com \
--to=hjl.tools@gmail.com \
--cc=libc-alpha@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).