Dear all,

On 12/22/22 18:54, Job Snijders via Libc-alpha wrote:
> Dear all,
> 
> This changeset adds support to inet_net_pton() to convert IPv6 network
> numbers (IPv6 prefixes with CIDR notation) from presentation format to
> network format.
> 
> The starting point of this changeset was OpenBSD's
> libc/net/inet_net_pton.c (r1.13) implementation of inet_net_pton_ipv6().
> https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/lib/libc/net/inet_net_pton.c?annotate=1.13
> The OpenBSD implementation was adapted to glibc as following:
> 
> 1) Use strncpy() instead of strlcpy()

Would someone please add a function to glibc that truncates a string, while 
still producing a string (as opposed to a null-padded fixed-width character 
sequence)?

Here goes an extract of the yet-unreleased strncpy(3) manual page from the Linux 
man-pages master branch:


DESCRIPTION
        These functions copy the string pointed to by src  into  a  null‐padded
        character sequence at the fixed‐width buffer pointed to by dst.  If the
        destination buffer, limited by its size, isn’t large enough to hold the
        copy,  the  resulting character sequence is truncated.  For the differ‐
        ence between the two functions, see RETURN VALUE.

        An implementation of these functions might be:

            char *
            stpncpy(char *restrict dst, const char *restrict src, size_t sz)
            {
                bzero(dst, sz);
                return mempcpy(dst, src, strnlen(src, sz));
            }

            char *
            strncpy(char *restrict dst, const char *restrict src, size_t sz)
            {
                stpncpy(dst, src, sz);
                return dst;
            }

        [...]

CAVEATS
        The name of these functions is confusing.  These  functions  produce  a
        null‐padded character sequence, not a string (see string_copying(7)).

        It’s  impossible  to  distinguish truncation by the result of the call,
        from a character sequence that just fits the destination buffer;  trun‐
        cation  should  be detected by comparing the length of the input string
        with the size of the destination buffer.

I'll be releasing the a new man-pages version very soon (a week at most), so 
that this page and also the new string_copying(7) overview are widely available.

Cheers,

Alex

> 2) Use strtol() instead of strtonum()
> 3) Updated comments
> 
> I've tested the changeset on Debian Bookworm.
> 
> Kind regards,
> 
> Job
> 
>   
> Signed-off-by: Job Snijders <job@fastly.com>
> 
> diff --git resolv/inet_net_pton.c resolv/inet_net_pton.c
> index aab9b7b582..163e76e1a5 100644
> --- resolv/inet_net_pton.c
> +++ resolv/inet_net_pton.c
> @@ -1,4 +1,6 @@
>   /*
> + * Copyright (c) 2022 Job Snijders <job@fastly.com>
> + * Copyright (c) 2012 by Gilles Chehade <gilles@openbsd.org>
>    * Copyright (c) 1996,1999 by Internet Software Consortium.
>    *
>    * Permission to use, copy, modify, and distribute this software for any
> @@ -35,13 +37,16 @@
>   
>   static int	inet_net_pton_ipv4 (const char *src, u_char *dst,
>   				    size_t size) __THROW;
> +static int	inet_net_pton_ipv6 (const char *src, u_char *dst,
> +				    size_t size) __THROW;
>   
>   /*
> - * static int
> + * int
>    * inet_net_pton(af, src, dst, size)
> - *	convert network number from presentation to network format.
> - *	accepts hex octets, hex strings, decimal octets, and /CIDR.
> - *	"size" is in bytes and describes "dst".
> + *	Convert network number from presentation format to network format.
> + *	If "af" is set to AF_INET, accept various formats like hex octets,
> + *	hex strings, or decimal octets. If "af" is set to AF_INET6, accept
> + *	IPv6 addresses. "size" is in bytes and describes "dst".
>    * return:
>    *	number of bits, either imputed classfully or specified with /CIDR,
>    *	or -1 if some failure occurred (check errno).  ENOENT means it was
> @@ -55,6 +60,8 @@ inet_net_pton (int af, const char *src, void *dst, size_t size)
>   	switch (af) {
>   	case AF_INET:
>   		return (inet_net_pton_ipv4(src, dst, size));
> +	case AF_INET6:
> +		return (inet_net_pton_ipv6(src, dst, size));
>   	default:
>   		__set_errno (EAFNOSUPPORT);
>   		return (-1);
> @@ -196,3 +203,64 @@ inet_net_pton_ipv4 (const char *src, u_char *dst, size_t size)
>   	__set_errno (EMSGSIZE);
>   	return (-1);
>   }
> +
> +
> +/*
> + * Convert an IPv6 prefix from presentation format to network format.
> + * Return the number of bits specified, or -1 as error (check errno).
> + */
> +static int
> +inet_net_pton_ipv6 (const char *src, u_char *dst, size_t size)
> +{
> +	struct in6_addr	 in6;
> +	int		 bits;
> +	long		 lbits;
> +	size_t		 bytes;
> +	char		 buf[INET6_ADDRSTRLEN + sizeof("/128")];
> +	char		*ep, *sep;
> +
> +	strncpy(buf, src, sizeof(buf) - 1);

The -1 above is unnecessary.

> +	buf[sizeof(buf) - 1] = '\0';
> +
> +	sep = strchr(buf, '/');
> +	if (sep != NULL)
> +		*sep++ = '\0';
> +
> +	if (inet_pton(AF_INET6, buf, &in6) != 1) {
> +		__set_errno (ENOENT);
> +		return (-1);
> +	}
> +
> +	if (sep == NULL) {
> +		bits = 128;
> +		goto out;
> +	}
> +
> +	if (sep[0] == '\0' || !isascii(sep[0]) || !isdigit(sep[0])) {
> +		__set_errno (ENOENT);
> +		return (-1);
> +	}
> +
> +	errno = 0;
> +	lbits = strtol(sep, &ep, 10);
> +	if (sep[0] == '\0' || *ep != '\0') {
> +		__set_errno (ENOENT);
> +		return (-1);
> +	}
> +	if ((errno == ERANGE && (lbits == LONG_MAX || lbits == LONG_MIN))
> +	    || (lbits > 128 || lbits < 0)) {
> +		__set_errno (EMSGSIZE);
> +		return (-1);
> +	}
> +	bits = lbits;
> +
> + out:
> +	bytes = (bits + 7) / 8;
> +	if (bytes > size) {
> +		__set_errno (EMSGSIZE);
> +		return (-1);
> +	}
> +
> +	memcpy(dst, &in6.s6_addr, bytes);
> +	return (bits);
> +}

-- 
<http://www.alejandro-colomar.es/>