* One week to go for 2.31 release
@ 2020-01-23 14:29 Siddhesh Poyarekar
2020-01-23 15:35 ` Adhemerval Zanella
` (3 more replies)
0 siblings, 4 replies; 10+ messages in thread
From: Siddhesh Poyarekar @ 2020-01-23 14:29 UTC (permalink / raw)
To: GLIBC Devel
Hello,
There's about a week to go before I cut a release. I noticed that only
arm, mips, ppc and s390 have test results. How's it going with aarch64,
x86 and the rest? Any issues that I should know about and/or factor
into release time?
If everything is on schedule and there are no issues, I'll do final
release testing about this time next week and then cut a release in a
couple of days.
Siddhesh
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-23 14:29 One week to go for 2.31 release Siddhesh Poyarekar
@ 2020-01-23 15:35 ` Adhemerval Zanella
2020-01-23 15:39 ` Siddhesh Poyarekar
2020-01-23 15:37 ` Szabolcs Nagy
` (2 subsequent siblings)
3 siblings, 1 reply; 10+ messages in thread
From: Adhemerval Zanella @ 2020-01-23 15:35 UTC (permalink / raw)
To: libc-alpha
On 23/01/2020 11:08, Siddhesh Poyarekar wrote:
> Hello,
>
> There's about a week to go before I cut a release. I noticed that only
> arm, mips, ppc and s390 have test results. How's it going with aarch64,
> x86 and the rest? Any issues that I should know about and/or factor
> into release time?
>
> If everything is on schedule and there are no issues, I'll do final
> release testing about this time next week and then cut a release in a
> couple of days.
Hi Siddhesh,
We do have results for aarch64 and I will start the Alpha, HPPA, IA64,
and SH4.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-23 14:29 One week to go for 2.31 release Siddhesh Poyarekar
2020-01-23 15:35 ` Adhemerval Zanella
@ 2020-01-23 15:37 ` Szabolcs Nagy
2020-01-23 15:40 ` Siddhesh Poyarekar
2020-01-23 15:38 ` Carlos O'Donell
2020-01-24 0:33 ` Samuel Thibault
3 siblings, 1 reply; 10+ messages in thread
From: Szabolcs Nagy @ 2020-01-23 15:37 UTC (permalink / raw)
To: Siddhesh Poyarekar, GLIBC Devel; +Cc: nd
On 23/01/2020 14:08, Siddhesh Poyarekar wrote:
> There's about a week to go before I cut a release. I noticed that only
> arm, mips, ppc and s390 have test results. How's it going with aarch64,
> x86 and the rest? Any issues that I should know about and/or factor
> into release time?
i added aarch64 test results from the buildbot.
(using a recent green build, i.e. there are no issues.)
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-23 14:29 One week to go for 2.31 release Siddhesh Poyarekar
2020-01-23 15:35 ` Adhemerval Zanella
2020-01-23 15:37 ` Szabolcs Nagy
@ 2020-01-23 15:38 ` Carlos O'Donell
2020-01-23 15:40 ` Siddhesh Poyarekar
2020-01-23 18:14 ` Arjun Shankar
2020-01-24 0:33 ` Samuel Thibault
3 siblings, 2 replies; 10+ messages in thread
From: Carlos O'Donell @ 2020-01-23 15:38 UTC (permalink / raw)
To: Siddhesh Poyarekar, Arjun Shankar, Patsy Griffin; +Cc: GLIBC Devel
On Thu, Jan 23, 2020 at 9:20 AM Siddhesh Poyarekar <siddhesh@gotplt.org> wrote:
>
> Hello,
>
> There's about a week to go before I cut a release. I noticed that only
> arm, mips, ppc and s390 have test results. How's it going with aarch64,
> x86 and the rest? Any issues that I should know about and/or factor
> into release time?
>
> If everything is on schedule and there are no issues, I'll do final
> release testing about this time next week and then cut a release in a
> couple of days.
Patsy is doing x86_64 testing.
Arjun is doing aarch64 testing.
I'll let them answer for their schedule.
Cheers,
Carlos.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-23 15:35 ` Adhemerval Zanella
@ 2020-01-23 15:39 ` Siddhesh Poyarekar
0 siblings, 0 replies; 10+ messages in thread
From: Siddhesh Poyarekar @ 2020-01-23 15:39 UTC (permalink / raw)
To: Adhemerval Zanella, libc-alpha
On 23/01/20 8:23 pm, Adhemerval Zanella wrote:
> We do have results for aarch64 and I will start the Alpha, HPPA, IA64,
> and SH4.
>
Perfect, thanks!
Siddhesh
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-23 15:37 ` Szabolcs Nagy
@ 2020-01-23 15:40 ` Siddhesh Poyarekar
0 siblings, 0 replies; 10+ messages in thread
From: Siddhesh Poyarekar @ 2020-01-23 15:40 UTC (permalink / raw)
To: Szabolcs Nagy, GLIBC Devel; +Cc: nd
On 23/01/20 9:05 pm, Szabolcs Nagy wrote:
> i added aarch64 test results from the buildbot.
> (using a recent green build, i.e. there are no issues.)
>
That's great, thanks!
Siddhesh
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-23 15:38 ` Carlos O'Donell
@ 2020-01-23 15:40 ` Siddhesh Poyarekar
2020-01-23 18:14 ` Arjun Shankar
1 sibling, 0 replies; 10+ messages in thread
From: Siddhesh Poyarekar @ 2020-01-23 15:40 UTC (permalink / raw)
To: Carlos O'Donell, Arjun Shankar, Patsy Griffin; +Cc: GLIBC Devel
On 23/01/20 9:06 pm, Carlos O'Donell wrote:
> Patsy is doing x86_64 testing.
>
> Arjun is doing aarch64 testing.
>
> I'll let them answer for their schedule.
Great, thanks! Just wanted to make sure that there are no last minute
surprises and hopefully there aren't :)
Siddhesh
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-23 15:38 ` Carlos O'Donell
2020-01-23 15:40 ` Siddhesh Poyarekar
@ 2020-01-23 18:14 ` Arjun Shankar
1 sibling, 0 replies; 10+ messages in thread
From: Arjun Shankar @ 2020-01-23 18:14 UTC (permalink / raw)
To: Carlos O'Donell, Siddhesh Poyarekar, Patsy Griffin; +Cc: GLIBC Devel
Hi,
> > There's about a week to go before I cut a release. I noticed that only
> > arm, mips, ppc and s390 have test results. How's it going with aarch64,
> > x86 and the rest? Any issues that I should know about and/or factor
> > into release time?
> >
> > If everything is on schedule and there are no issues, I'll do final
> > release testing about this time next week and then cut a release in a
> > couple of days.
> Patsy is doing x86_64 testing.
>
> Arjun is doing aarch64 testing.
I should have aarch64 results logged to the wiki by Monday.
Cheers,
Arjun
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-23 14:29 One week to go for 2.31 release Siddhesh Poyarekar
` (2 preceding siblings ...)
2020-01-23 15:38 ` Carlos O'Donell
@ 2020-01-24 0:33 ` Samuel Thibault
2020-01-24 3:15 ` Siddhesh Poyarekar
3 siblings, 1 reply; 10+ messages in thread
From: Samuel Thibault @ 2020-01-24 0:33 UTC (permalink / raw)
To: Siddhesh Poyarekar; +Cc: GLIBC Devel
Hello,
Siddhesh Poyarekar, le jeu. 23 janv. 2020 19:38:11 +0530, a ecrit:
> There's about a week to go before I cut a release. I noticed that only
> arm, mips, ppc and s390 have test results. How's it going with aarch64,
> x86 and the rest?
I have added the Hurd results, no regression, 10 failing tests less.
Samuel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: One week to go for 2.31 release
2020-01-24 0:33 ` Samuel Thibault
@ 2020-01-24 3:15 ` Siddhesh Poyarekar
0 siblings, 0 replies; 10+ messages in thread
From: Siddhesh Poyarekar @ 2020-01-24 3:15 UTC (permalink / raw)
To: Samuel Thibault; +Cc: GLIBC Devel
On 24/01/20 5:38 am, Samuel Thibault wrote:
> I have added the Hurd results, no regression, 10 failing tests less.
>
Awesome, thanks!
Siddhesh
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-01-24 3:00 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-23 14:29 One week to go for 2.31 release Siddhesh Poyarekar
2020-01-23 15:35 ` Adhemerval Zanella
2020-01-23 15:39 ` Siddhesh Poyarekar
2020-01-23 15:37 ` Szabolcs Nagy
2020-01-23 15:40 ` Siddhesh Poyarekar
2020-01-23 15:38 ` Carlos O'Donell
2020-01-23 15:40 ` Siddhesh Poyarekar
2020-01-23 18:14 ` Arjun Shankar
2020-01-24 0:33 ` Samuel Thibault
2020-01-24 3:15 ` Siddhesh Poyarekar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).