From: Mike Frysinger <vapier@gentoo.org>
To: libc-alpha@sourceware.org, libc-ports@sourceware.org
Subject: [PATCH] rename configure.in to configure.ac
Date: Thu, 05 Sep 2013 00:07:00 -0000 [thread overview]
Message-ID: <1378339628-28867-1-git-send-email-vapier@gentoo.org> (raw)
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
INSTALL | 2 +-
Makeconfig | 8 ++++----
Makefile | 6 +++---
aclocal.m4 | 6 +++---
config.h.in | 6 +++---
configure | 4 ++--
configure.in => configure.ac | 4 ++--
libidn/{configure.in => configure.ac} | 0
malloc/Makefile | 2 +-
manual/install.texi | 2 +-
manual/maint.texi | 8 ++++----
nptl/sysdeps/pthread/{configure.in => configure.ac} | 0
nptl/sysdeps/x86_64/{configure.in => configure.ac} | 0
nscd/Makefile | 2 +-
ports/README | 4 ++--
ports/sysdeps/alpha/{configure.in => configure.ac} | 0
ports/sysdeps/arm/armv7/{configure.in => configure.ac} | 0
ports/sysdeps/arm/{configure.in => configure.ac} | 0
ports/sysdeps/arm/preconfigure | 4 ++--
ports/sysdeps/arm/{preconfigure.in => preconfigure.ac} | 2 +-
ports/sysdeps/hppa/{configure.in => configure.ac} | 0
ports/sysdeps/ia64/{configure.in => configure.ac} | 0
ports/sysdeps/mips/{configure.in => configure.ac} | 0
.../unix/sysv/linux/aarch64/{configure.in => configure.ac} | 0
.../sysdeps/unix/sysv/linux/alpha/{configure.in => configure.ac} | 0
ports/sysdeps/unix/sysv/linux/am33/{configure.in => configure.ac} | 0
ports/sysdeps/unix/sysv/linux/arm/configure | 4 ++--
ports/sysdeps/unix/sysv/linux/arm/{configure.in => configure.ac} | 2 +-
.../unix/sysv/linux/arm/nptl/{configure.in => configure.ac} | 0
ports/sysdeps/unix/sysv/linux/ia64/{configure.in => configure.ac} | 0
ports/sysdeps/unix/sysv/linux/m68k/{configure.in => configure.ac} | 0
.../unix/sysv/linux/microblaze/{configure.in => configure.ac} | 0
ports/sysdeps/unix/sysv/linux/mips/{configure.in => configure.ac} | 0
.../unix/sysv/linux/mips/mips64/{configure.in => configure.ac} | 0
ports/sysdeps/unix/sysv/linux/tile/{configure.in => configure.ac} | 0
.../unix/sysv/linux/tile/tilegx/{configure.in => configure.ac} | 0
sysdeps/gnu/{configure.in => configure.ac} | 0
sysdeps/i386/{configure.in => configure.ac} | 0
sysdeps/ieee754/ldbl-opt/{configure.in => configure.ac} | 0
sysdeps/mach/{configure.in => configure.ac} | 0
sysdeps/mach/hurd/{configure.in => configure.ac} | 0
sysdeps/powerpc/{configure.in => configure.ac} | 0
sysdeps/powerpc/powerpc32/{configure.in => configure.ac} | 0
sysdeps/powerpc/powerpc64/{configure.in => configure.ac} | 0
sysdeps/s390/s390-32/{configure.in => configure.ac} | 0
sysdeps/s390/s390-64/{configure.in => configure.ac} | 0
sysdeps/sh/{configure.in => configure.ac} | 0
sysdeps/sparc/{configure.in => configure.ac} | 0
sysdeps/unix/sysv/linux/{configure.in => configure.ac} | 0
sysdeps/unix/sysv/linux/powerpc/{configure.in => configure.ac} | 0
sysdeps/x86_64/{configure.in => configure.ac} | 0
sysdeps/x86_64/{preconfigure.in => preconfigure.ac} | 0
52 files changed, 33 insertions(+), 33 deletions(-)
rename configure.in => configure.ac (99%)
rename libidn/{configure.in => configure.ac} (100%)
rename nptl/sysdeps/pthread/{configure.in => configure.ac} (100%)
rename nptl/sysdeps/x86_64/{configure.in => configure.ac} (100%)
rename ports/sysdeps/alpha/{configure.in => configure.ac} (100%)
rename ports/sysdeps/arm/armv7/{configure.in => configure.ac} (100%)
rename ports/sysdeps/arm/{configure.in => configure.ac} (100%)
rename ports/sysdeps/arm/{preconfigure.in => preconfigure.ac} (96%)
rename ports/sysdeps/hppa/{configure.in => configure.ac} (100%)
rename ports/sysdeps/ia64/{configure.in => configure.ac} (100%)
rename ports/sysdeps/mips/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/aarch64/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/alpha/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/am33/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/arm/{configure.in => configure.ac} (95%)
rename ports/sysdeps/unix/sysv/linux/arm/nptl/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/ia64/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/m68k/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/microblaze/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/mips/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/mips/mips64/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/tile/{configure.in => configure.ac} (100%)
rename ports/sysdeps/unix/sysv/linux/tile/tilegx/{configure.in => configure.ac} (100%)
rename sysdeps/gnu/{configure.in => configure.ac} (100%)
rename sysdeps/i386/{configure.in => configure.ac} (100%)
rename sysdeps/ieee754/ldbl-opt/{configure.in => configure.ac} (100%)
rename sysdeps/mach/{configure.in => configure.ac} (100%)
rename sysdeps/mach/hurd/{configure.in => configure.ac} (100%)
rename sysdeps/powerpc/{configure.in => configure.ac} (100%)
rename sysdeps/powerpc/powerpc32/{configure.in => configure.ac} (100%)
rename sysdeps/powerpc/powerpc64/{configure.in => configure.ac} (100%)
rename sysdeps/s390/s390-32/{configure.in => configure.ac} (100%)
rename sysdeps/s390/s390-64/{configure.in => configure.ac} (100%)
rename sysdeps/sh/{configure.in => configure.ac} (100%)
rename sysdeps/sparc/{configure.in => configure.ac} (100%)
rename sysdeps/unix/sysv/linux/{configure.in => configure.ac} (100%)
rename sysdeps/unix/sysv/linux/powerpc/{configure.in => configure.ac} (100%)
rename sysdeps/x86_64/{configure.in => configure.ac} (100%)
rename sysdeps/x86_64/{preconfigure.in => preconfigure.ac} (100%)
diff --git a/INSTALL b/INSTALL
index 211fd91..00ce18f 100644
--- a/INSTALL
+++ b/INSTALL
@@ -371,7 +371,7 @@ build the GNU C Library:
should definitely upgrade `sed'.
-If you change any of the `configure.in' files you will also need
+If you change any of the `configure.ac' files you will also need
* GNU `autoconf' 2.53 or higher
diff --git a/Makeconfig b/Makeconfig
index a3d3e70..6618987 100644
--- a/Makeconfig
+++ b/Makeconfig
@@ -88,16 +88,16 @@ $(common-objpfx)config.status: $(..)version.h $(..)configure \
$(wildcard $(dir)/Implies) \
$(patsubst %.in,%,\
$(firstword $(wildcard \
- $(addprefix $(dir)/,configure configure.in))))) \
+ $(addprefix $(dir)/,configure configure.ac))))) \
$(patsubst %.in,%,\
- $(wildcard $(..)sysdeps/*/preconfigure $(..)sysdeps/*/preconfigure.in)) \
+ $(wildcard $(..)sysdeps/*/preconfigure $(..)sysdeps/*/preconfigure.ac)) \
$(patsubst %.in,%,\
$(foreach add-on,$(add-ons),\
$(firstword $(wildcard \
$(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\
- configure configure.in))) \
+ configure configure.ac))) \
$(wildcard $(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\
- sysdeps/*/preconfigure sysdeps/*/preconfigure.in))))
+ sysdeps/*/preconfigure sysdeps/*/preconfigure.ac))))
@cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \
echo The GNU C library has not been configured. >&2; \
echo Run \`configure\' to configure it before building. >&2; \
diff --git a/Makefile b/Makefile
index ba1820d..83b2b3f 100644
--- a/Makefile
+++ b/Makefile
@@ -38,9 +38,9 @@ chmod a-w$(patsubst %,$(comma)a+x,$(filter .,$(@D))) $@.new
mv -f $@.new $@
endef
-configure: configure.in aclocal.m4; $(autoconf-it)
-%/configure: %/configure.in aclocal.m4; $(autoconf-it)
-%/preconfigure: %/preconfigure.in aclocal.m4; $(autoconf-it)
+configure: configure.ac aclocal.m4; $(autoconf-it)
+%/configure: %/configure.ac aclocal.m4; $(autoconf-it)
+%/preconfigure: %/preconfigure.ac aclocal.m4; $(autoconf-it)
endif # $(AUTOCONF) = no
diff --git a/aclocal.m4 b/aclocal.m4
index 64351d0..bc48586 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -9,8 +9,8 @@ m4_defn([AC_AUTOCONF_VERSION])
), [63])])dnl
dnl
dnl We define the macro GLIBC_PROVIDES to do an AC_PROVIDE for each macro
-dnl which appears in configure.in before the sysdep configure scripts are run.
-dnl Each sysdep configure.in does GLIBC_PROVIDES first, to avoid any
+dnl which appears in configure.ac before the sysdep configure scripts are run.
+dnl Each sysdep configure.ac does GLIBC_PROVIDES first, to avoid any
dnl AC_REQUIREs or AC_BEFOREs duplicating their code.
dnl
define([GLIBC_PROVIDES], [dnl
@@ -39,7 +39,7 @@ dnl Ripped out of AS_INIT, which does more cruft we do not want.
m4_wrap([m4_divert_pop([BODY])[]])
m4_divert_push([BODY])[]dnl
dnl End of ripped out of AS_INIT.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
define([_AC_LANG], [C])dnl
])dnl
dnl
diff --git a/config.h.in b/config.h.in
index 30568e3..4549c88 100644
--- a/config.h.in
+++ b/config.h.in
@@ -201,13 +201,13 @@
They are used only in miscellaneous generator programs, not
in compiling libc itself. */
-/* sysdeps/generic/configure.in */
+/* sysdeps/generic/configure.ac */
#undef HAVE_PSIGNAL
-/* sysdeps/unix/configure.in */
+/* sysdeps/unix/configure.ac */
#undef HAVE_STRERROR
-/* sysdeps/unix/common/configure.in */
+/* sysdeps/unix/common/configure.ac */
#undef HAVE_SYS_SIGLIST
#undef HAVE__SYS_SIGLIST
#undef HAVE__CTYPE_
diff --git a/configure b/configure
index 2122583..e9c2827 100755
--- a/configure
+++ b/configure
@@ -5171,7 +5171,7 @@ $as_echo_n "checking whether $AUTOCONF${ACFLAGS:+ }$ACFLAGS works... " >&6; }
if ${libc_cv_autoconf_works+:} false; then :
$as_echo_n "(cached) " >&6
else
- if (cd $srcdir; $AUTOCONF $ACFLAGS configure.in > /dev/null 2>&1); then
+ if (cd $srcdir; $AUTOCONF $ACFLAGS configure.ac > /dev/null 2>&1); then
libc_cv_autoconf_works=yes
else
libc_cv_autoconf_works=no
@@ -8801,7 +8801,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
ac_sub_configure=$ac_srcdir/configure.gnu
elif test -f "$ac_srcdir/configure"; then
ac_sub_configure=$ac_srcdir/configure
- elif test -f "$ac_srcdir/configure.in"; then
+ elif test -f "$ac_srcdir/configure.ac"; then
# This should be Cygnus configure.
ac_sub_configure=$ac_aux_dir/configure
else
diff --git a/configure.in b/configure.ac
similarity index 99%
rename from configure.in
rename to configure.ac
index be13308..709208b 100644
--- a/configure.in
+++ b/configure.ac
@@ -1010,7 +1010,7 @@ xno|x|x:) AUTOCONF=no ;;
*)
AC_CACHE_CHECK(dnl
whether $AUTOCONF${ACFLAGS:+ }$ACFLAGS works, libc_cv_autoconf_works, [dnl
- if (cd $srcdir; $AUTOCONF $ACFLAGS configure.in > /dev/null 2>&1); then
+ if (cd $srcdir; $AUTOCONF $ACFLAGS configure.ac > /dev/null 2>&1); then
libc_cv_autoconf_works=yes
else
libc_cv_autoconf_works=no
@@ -2155,7 +2155,7 @@ AC_SUBST(static_nss)
AC_SUBST(DEFINES)
-dnl See sysdeps/mach/configure.in for this variable.
+dnl See sysdeps/mach/configure.ac for this variable.
AC_SUBST(mach_interface_list)
VERSION=`sed -n -e 's/^#define VERSION "\([^"]*\)"/\1/p' < $srcdir/version.h`
diff --git a/libidn/configure.in b/libidn/configure.ac
similarity index 100%
rename from libidn/configure.in
rename to libidn/configure.ac
diff --git a/malloc/Makefile b/malloc/Makefile
index 0fe31a4..d45a4d5 100644
--- a/malloc/Makefile
+++ b/malloc/Makefile
@@ -76,7 +76,7 @@ install-bin-script += memusage
generated += memusagestat memusage
extra-objs += memusagestat.o
-# The configure.in check for libgd and its headers did not use $SYSINCLUDES.
+# The configure.ac check for libgd and its headers did not use $SYSINCLUDES.
# The directory specified by --with-headers usually contains only the basic
# kernel interface headers, not something like libgd. So the simplest thing
# is to presume that the standard system headers will be ok for this file.
diff --git a/manual/install.texi b/manual/install.texi
index 2ac0104..477d474 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -416,7 +416,7 @@ should definitely upgrade @code{sed}.
@end itemize
@noindent
-If you change any of the @file{configure.in} files you will also need
+If you change any of the @file{configure.ac} files you will also need
@itemize @bullet
@item
diff --git a/manual/maint.texi b/manual/maint.texi
index 0f4b959..659ceae 100644
--- a/manual/maint.texi
+++ b/manual/maint.texi
@@ -316,7 +316,7 @@ This file is a shell script fragment to be run at configuration time.
The top-level @file{configure} script uses the shell @code{.} command to
read the @file{configure} file in each system-dependent directory
chosen, in order. The @file{configure} files are often generated from
-@file{configure.in} files using Autoconf.
+@file{configure.ac} files using Autoconf.
A system-dependent @file{configure} script will usually add things to
the shell variables @samp{DEFS} and @samp{config_vars}; see the
@@ -329,14 +329,14 @@ shell variable @w{@samp{with_@var{package}}} (with any dashes in
just @w{@samp{--with-@var{package}}} (no argument), then it sets
@w{@samp{with_@var{package}}} to @samp{yes}.
-@item configure.in
+@item configure.ac
This file is an Autoconf input fragment to be processed into the file
@file{configure} in this subdirectory. @xref{Introduction,,,
autoconf.info, Autoconf: Generating Automatic Configuration Scripts},
for a description of Autoconf. You should write either @file{configure}
-or @file{configure.in}, but not both. The first line of
-@file{configure.in} should invoke the @code{m4} macro
+or @file{configure.ac}, but not both. The first line of
+@file{configure.ac} should invoke the @code{m4} macro
@samp{GLIBC_PROVIDES}. This macro does several @code{AC_PROVIDE} calls
for Autoconf macros which are used by the top-level @file{configure}
script; without this, those macros might be invoked again unnecessarily
diff --git a/nptl/sysdeps/pthread/configure.in b/nptl/sysdeps/pthread/configure.ac
similarity index 100%
rename from nptl/sysdeps/pthread/configure.in
rename to nptl/sysdeps/pthread/configure.ac
diff --git a/nptl/sysdeps/x86_64/configure.in b/nptl/sysdeps/x86_64/configure.ac
similarity index 100%
rename from nptl/sysdeps/x86_64/configure.in
rename to nptl/sysdeps/x86_64/configure.ac
diff --git a/nscd/Makefile b/nscd/Makefile
index 7b36cc9..b8498da 100644
--- a/nscd/Makefile
+++ b/nscd/Makefile
@@ -60,7 +60,7 @@ endif
nscd-modules += selinux
selinux-LIBS := -lselinux $(libaudit) $(libcap)
-# The configure.in check for libselinux and its headers did not use
+# The configure.ac check for libselinux and its headers did not use
# $SYSINCLUDES. The directory specified by --with-headers usually
# contains only the basic kernel interface headers, not something like
# libselinux. So the simplest thing is to presume that the standard
diff --git a/ports/README b/ports/README
index d16b0f0..2c73b1e 100644
--- a/ports/README
+++ b/ports/README
@@ -24,7 +24,7 @@ rather than the generic ones here.
The real source code for any ports is found in the sysdeps/ subdirectories.
These should be exactly what would go into the main libc source tree if you
were to incorporate it directly. The only exceptions are the files
-sysdeps/*/preconfigure and sysdeps/*/preconfigure.in; these are fragments
+sysdeps/*/preconfigure and sysdeps/*/preconfigure.ac; these are fragments
used by this add-on's configure fragment. The purpose of these is to set
$base_machine et al when the main libc configure's defaults are not right
for some machine. Everything else can and should be done from a normal
@@ -32,7 +32,7 @@ sysdeps/.../configure fragment that is used only when the configuration
selects that sysdeps subdirectory. Each port that requires some special
treatment before the sysdeps directory list is calculated, should add a
sysdeps/CPU/preconfigure file; this can either be written by hand or
-generated by Autoconf from sysdeps/CPU/preconfigure.in, and follow the
+generated by Autoconf from sysdeps/CPU/preconfigure.ac, and follow the
rules for glibc add-on configure fragments. No preconfigure file should do
anything on an unrelated configuration, so that disparate ports can be put
into a single add-on without interfering with each other.
diff --git a/ports/sysdeps/alpha/configure.in b/ports/sysdeps/alpha/configure.ac
similarity index 100%
rename from ports/sysdeps/alpha/configure.in
rename to ports/sysdeps/alpha/configure.ac
diff --git a/ports/sysdeps/arm/armv7/configure.in b/ports/sysdeps/arm/armv7/configure.ac
similarity index 100%
rename from ports/sysdeps/arm/armv7/configure.in
rename to ports/sysdeps/arm/armv7/configure.ac
diff --git a/ports/sysdeps/arm/configure.in b/ports/sysdeps/arm/configure.ac
similarity index 100%
rename from ports/sysdeps/arm/configure.in
rename to ports/sysdeps/arm/configure.ac
diff --git a/ports/sysdeps/arm/preconfigure b/ports/sysdeps/arm/preconfigure
index 908cd34..b3124ed 100644
--- a/ports/sysdeps/arm/preconfigure
+++ b/ports/sysdeps/arm/preconfigure
@@ -1,4 +1,4 @@
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local preconfigure fragment for sysdeps/arm
case "$machine" in
@@ -8,7 +8,7 @@ arm*)
# If the compiler enables unwind tables by default, this causes
# problems with undefined symbols in -nostdlib link tests. To
# avoid this, add -fno-unwind-tables here and remove it in
- # sysdeps/unix/sysv/linux/arm/configure.in after those tests have
+ # sysdeps/unix/sysv/linux/arm/configure.ac after those tests have
# been run.
if test "${CFLAGS+set}" != "set"; then
CFLAGS="-g -O2"
diff --git a/ports/sysdeps/arm/preconfigure.in b/ports/sysdeps/arm/preconfigure.ac
similarity index 96%
rename from ports/sysdeps/arm/preconfigure.in
rename to ports/sysdeps/arm/preconfigure.ac
index f835795..39c8621 100644
--- a/ports/sysdeps/arm/preconfigure.in
+++ b/ports/sysdeps/arm/preconfigure.ac
@@ -8,7 +8,7 @@ arm*)
# If the compiler enables unwind tables by default, this causes
# problems with undefined symbols in -nostdlib link tests. To
# avoid this, add -fno-unwind-tables here and remove it in
- # sysdeps/unix/sysv/linux/arm/configure.in after those tests have
+ # sysdeps/unix/sysv/linux/arm/configure.ac after those tests have
# been run.
if test "${CFLAGS+set}" != "set"; then
CFLAGS="-g -O2"
diff --git a/ports/sysdeps/hppa/configure.in b/ports/sysdeps/hppa/configure.ac
similarity index 100%
rename from ports/sysdeps/hppa/configure.in
rename to ports/sysdeps/hppa/configure.ac
diff --git a/ports/sysdeps/ia64/configure.in b/ports/sysdeps/ia64/configure.ac
similarity index 100%
rename from ports/sysdeps/ia64/configure.in
rename to ports/sysdeps/ia64/configure.ac
diff --git a/ports/sysdeps/mips/configure.in b/ports/sysdeps/mips/configure.ac
similarity index 100%
rename from ports/sysdeps/mips/configure.in
rename to ports/sysdeps/mips/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/aarch64/configure.in b/ports/sysdeps/unix/sysv/linux/aarch64/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/aarch64/configure.in
rename to ports/sysdeps/unix/sysv/linux/aarch64/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/alpha/configure.in b/ports/sysdeps/unix/sysv/linux/alpha/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/alpha/configure.in
rename to ports/sysdeps/unix/sysv/linux/alpha/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/am33/configure.in b/ports/sysdeps/unix/sysv/linux/am33/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/am33/configure.in
rename to ports/sysdeps/unix/sysv/linux/am33/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/arm/configure b/ports/sysdeps/unix/sysv/linux/arm/configure
index f66b158..71eb195 100644
--- a/ports/sysdeps/unix/sysv/linux/arm/configure
+++ b/ports/sysdeps/unix/sysv/linux/arm/configure
@@ -1,6 +1,6 @@
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/arm.
libc_cv_gcc_unwind_find_fde=no
-# Remove -fno-unwind-tables that was added in sysdeps/arm/preconfigure.in.
+# Remove -fno-unwind-tables that was added in sysdeps/arm/preconfigure.ac.
CFLAGS=${CFLAGS% -fno-unwind-tables}
diff --git a/ports/sysdeps/unix/sysv/linux/arm/configure.in b/ports/sysdeps/unix/sysv/linux/arm/configure.ac
similarity index 95%
rename from ports/sysdeps/unix/sysv/linux/arm/configure.in
rename to ports/sysdeps/unix/sysv/linux/arm/configure.ac
index 8fffe94..8e4e20d 100644
--- a/ports/sysdeps/unix/sysv/linux/arm/configure.in
+++ b/ports/sysdeps/unix/sysv/linux/arm/configure.ac
@@ -2,5 +2,5 @@ GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/unix/sysv/linux/arm.
libc_cv_gcc_unwind_find_fde=no
-# Remove -fno-unwind-tables that was added in sysdeps/arm/preconfigure.in.
+# Remove -fno-unwind-tables that was added in sysdeps/arm/preconfigure.ac.
CFLAGS=${CFLAGS% -fno-unwind-tables}
diff --git a/ports/sysdeps/unix/sysv/linux/arm/nptl/configure.in b/ports/sysdeps/unix/sysv/linux/arm/nptl/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/arm/nptl/configure.in
rename to ports/sysdeps/unix/sysv/linux/arm/nptl/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/ia64/configure.in b/ports/sysdeps/unix/sysv/linux/ia64/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/ia64/configure.in
rename to ports/sysdeps/unix/sysv/linux/ia64/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/m68k/configure.in b/ports/sysdeps/unix/sysv/linux/m68k/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/m68k/configure.in
rename to ports/sysdeps/unix/sysv/linux/m68k/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/microblaze/configure.in b/ports/sysdeps/unix/sysv/linux/microblaze/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/microblaze/configure.in
rename to ports/sysdeps/unix/sysv/linux/microblaze/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/mips/configure.in b/ports/sysdeps/unix/sysv/linux/mips/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/mips/configure.in
rename to ports/sysdeps/unix/sysv/linux/mips/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/mips/mips64/configure.in b/ports/sysdeps/unix/sysv/linux/mips/mips64/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/mips/mips64/configure.in
rename to ports/sysdeps/unix/sysv/linux/mips/mips64/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/tile/configure.in b/ports/sysdeps/unix/sysv/linux/tile/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/tile/configure.in
rename to ports/sysdeps/unix/sysv/linux/tile/configure.ac
diff --git a/ports/sysdeps/unix/sysv/linux/tile/tilegx/configure.in b/ports/sysdeps/unix/sysv/linux/tile/tilegx/configure.ac
similarity index 100%
rename from ports/sysdeps/unix/sysv/linux/tile/tilegx/configure.in
rename to ports/sysdeps/unix/sysv/linux/tile/tilegx/configure.ac
diff --git a/sysdeps/gnu/configure.in b/sysdeps/gnu/configure.ac
similarity index 100%
rename from sysdeps/gnu/configure.in
rename to sysdeps/gnu/configure.ac
diff --git a/sysdeps/i386/configure.in b/sysdeps/i386/configure.ac
similarity index 100%
rename from sysdeps/i386/configure.in
rename to sysdeps/i386/configure.ac
diff --git a/sysdeps/ieee754/ldbl-opt/configure.in b/sysdeps/ieee754/ldbl-opt/configure.ac
similarity index 100%
rename from sysdeps/ieee754/ldbl-opt/configure.in
rename to sysdeps/ieee754/ldbl-opt/configure.ac
diff --git a/sysdeps/mach/configure.in b/sysdeps/mach/configure.ac
similarity index 100%
rename from sysdeps/mach/configure.in
rename to sysdeps/mach/configure.ac
diff --git a/sysdeps/mach/hurd/configure.in b/sysdeps/mach/hurd/configure.ac
similarity index 100%
rename from sysdeps/mach/hurd/configure.in
rename to sysdeps/mach/hurd/configure.ac
diff --git a/sysdeps/powerpc/configure.in b/sysdeps/powerpc/configure.ac
similarity index 100%
rename from sysdeps/powerpc/configure.in
rename to sysdeps/powerpc/configure.ac
diff --git a/sysdeps/powerpc/powerpc32/configure.in b/sysdeps/powerpc/powerpc32/configure.ac
similarity index 100%
rename from sysdeps/powerpc/powerpc32/configure.in
rename to sysdeps/powerpc/powerpc32/configure.ac
diff --git a/sysdeps/powerpc/powerpc64/configure.in b/sysdeps/powerpc/powerpc64/configure.ac
similarity index 100%
rename from sysdeps/powerpc/powerpc64/configure.in
rename to sysdeps/powerpc/powerpc64/configure.ac
diff --git a/sysdeps/s390/s390-32/configure.in b/sysdeps/s390/s390-32/configure.ac
similarity index 100%
rename from sysdeps/s390/s390-32/configure.in
rename to sysdeps/s390/s390-32/configure.ac
diff --git a/sysdeps/s390/s390-64/configure.in b/sysdeps/s390/s390-64/configure.ac
similarity index 100%
rename from sysdeps/s390/s390-64/configure.in
rename to sysdeps/s390/s390-64/configure.ac
diff --git a/sysdeps/sh/configure.in b/sysdeps/sh/configure.ac
similarity index 100%
rename from sysdeps/sh/configure.in
rename to sysdeps/sh/configure.ac
diff --git a/sysdeps/sparc/configure.in b/sysdeps/sparc/configure.ac
similarity index 100%
rename from sysdeps/sparc/configure.in
rename to sysdeps/sparc/configure.ac
diff --git a/sysdeps/unix/sysv/linux/configure.in b/sysdeps/unix/sysv/linux/configure.ac
similarity index 100%
rename from sysdeps/unix/sysv/linux/configure.in
rename to sysdeps/unix/sysv/linux/configure.ac
diff --git a/sysdeps/unix/sysv/linux/powerpc/configure.in b/sysdeps/unix/sysv/linux/powerpc/configure.ac
similarity index 100%
rename from sysdeps/unix/sysv/linux/powerpc/configure.in
rename to sysdeps/unix/sysv/linux/powerpc/configure.ac
diff --git a/sysdeps/x86_64/configure.in b/sysdeps/x86_64/configure.ac
similarity index 100%
rename from sysdeps/x86_64/configure.in
rename to sysdeps/x86_64/configure.ac
diff --git a/sysdeps/x86_64/preconfigure.in b/sysdeps/x86_64/preconfigure.ac
similarity index 100%
rename from sysdeps/x86_64/preconfigure.in
rename to sysdeps/x86_64/preconfigure.ac
--
1.8.3.2
next reply other threads:[~2013-09-05 0:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-05 0:07 Mike Frysinger [this message]
2013-09-06 5:28 ` Carlos O'Donell
2013-09-06 6:53 ` Russ Allbery
2013-10-16 3:31 ` Allan McRae
2013-10-26 6:24 ` Allan McRae
2013-10-28 23:07 ` Roland McGrath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378339628-28867-1-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=libc-alpha@sourceware.org \
--cc=libc-ports@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).