public inbox for libc-ports@sourceware.org
 help / color / mirror / Atom feed
From: Will Newton <will.newton@linaro.org>
To: libc-ports@sourceware.org
Cc: patches@linaro.org
Subject: [PATCH v2] ARM: Add SystemTap probes to longjmp and setjmp.
Date: Wed, 05 Feb 2014 09:56:00 -0000	[thread overview]
Message-ID: <1391594162-22269-1-git-send-email-will.newton@linaro.org> (raw)

Now the ARM port implements pointer encryption for jmpbufs, gdb needs
a SystemTap probe point in longjmp to determine the target PC of
a call to longjmp. This patch implements the probe points in longjmp
and a similar probe point in setjmp.

In order to have all the appropriate registers available to pass to the
probe this reorders the layout of jmpbuf, putting the sp and lr registers
at the start rather than the end.

Tested on armv7, no new failures in the glibc testsuite and confirmed
that this fixes the gdb.base/longjmp.exp failures in the gdb testsuite.

ports/ChangeLog.arm:

2014-01-27  Will Newton  <will.newton@linaro.org>

	* sysdeps/arm/__longjmp.S: Include stap-probe.h.
	(__longjmp): Restore sp and lr before restoring callee
	saved registers.  Add longjmp and longjmp_target
	SystemTap probe point.
	* sysdeps/arm/include/bits/setjmp.h (__JMP_BUF_SP):
	Define to zero to match jmpbuf layout.
	* sysdeps/arm/setjmp.S: Include stap-probe.h.
	(__sigsetjmp): Save sp and lr before saving callee
	saved registers.  Add setjmp SystemTap probe point.
---
 ports/sysdeps/arm/__longjmp.S           | 61 ++++++++++++++++++++-------------
 ports/sysdeps/arm/include/bits/setjmp.h |  2 +-
 ports/sysdeps/arm/setjmp.S              | 12 +++++--
 3 files changed, 47 insertions(+), 28 deletions(-)

Changes in v2:
 - Add longjmp_target probe
 - Move longjmp probe up to point before restore of sp/lr

diff --git a/ports/sysdeps/arm/__longjmp.S b/ports/sysdeps/arm/__longjmp.S
index 27c57a1..08521e5 100644
--- a/ports/sysdeps/arm/__longjmp.S
+++ b/ports/sysdeps/arm/__longjmp.S
@@ -17,6 +17,7 @@
    <http://www.gnu.org/licenses/>.  */
 
 #include <sysdep.h>
+#include <stap-probe.h>
 #include <bits/setjmp.h>
 #include <rtld-global-offsets.h>
 #include <arm-features.h>
@@ -25,31 +26,35 @@
 
 ENTRY (__longjmp)
 	mov	ip, r0
-	movs	r0, r1		/* get the return value in place */
-	it	eq
-	moveq	r0, #1		/* can't let setjmp() return zero! */
 
 #ifdef CHECK_SP
 	sfi_breg ip, \
-	ldr	r4, [\B, #32]	/* jmpbuf's sp */
+	ldr	r4, [\B]	/* jmpbuf's sp */
 	cfi_undefined (r4)
 #ifdef PTR_DEMANGLE
 	PTR_DEMANGLE (r4, r4, a3, a4)
 #endif
 	CHECK_SP (r4)
 #endif
-	sfi_sp sfi_breg ip, \
-	ldmia	\B!, JMP_BUF_REGLIST
+
 #ifdef PTR_DEMANGLE
 	ldr	a4, [ip], #4
-	PTR_DEMANGLE (a4, a4, a3, a2)
-	mov	sp, a4
-	ldr	a4, [ip], #4
-	PTR_DEMANGLE2 (lr, a4, a3)
+	PTR_DEMANGLE (a4, a4, a3, r4)
+	cfi_undefined (r4)
+	ldr	r4, [ip], #4
+	PTR_DEMANGLE2 (r4, r4, a3)
 #else
-	ldr	sp, [ip], #4
-	ldr	lr, [ip], #4
+	ldr	a4, [ip], #4
+	ldr	r4, [ip], #4
+	cfi_undefined (r4)
 #endif
+	/* longjmp probe expects longjmp first argument (4@r0), second
+	   argument (-4@r1), and target address (4@r4), respectively.  */
+	LIBC_PROBE (longjmp, 3, 4@r0, -4@r1, 4@r4)
+	mov	sp, a4
+	mov	lr, r4
+	sfi_sp sfi_breg ip, \
+	ldmia	\B!, JMP_BUF_REGLIST
 	cfi_restore (v1)
 	cfi_restore (v2)
 	cfi_restore (v3)
@@ -67,27 +72,27 @@ ENTRY (__longjmp)
 
 #ifdef NEED_HWCAP
 # ifdef IS_IN_rtld
-	ldr	a2, 1f
+	ldr	a4, 1f
 	ldr	a3, .Lrtld_local_ro
-0:	add	a2, pc, a2
-	add	a2, a2, a3
-	ldr	a2, [a2, #RTLD_GLOBAL_RO_DL_HWCAP_OFFSET]
+0:	add	a4, pc, a4
+	add	a4, a4, a3
+	ldr	a4, [a4, #RTLD_GLOBAL_RO_DL_HWCAP_OFFSET]
 # else
 #  ifdef PIC
-	ldr	a2, 1f
+	ldr	a4, 1f
 	ldr	a3, .Lrtld_global_ro
-0:	add	a2, pc, a2
-	ldr	a2, [a2, a3]
-	ldr	a2, [a2, #RTLD_GLOBAL_RO_DL_HWCAP_OFFSET]
+0:	add	a4, pc, a4
+	ldr	a4, [a4, a3]
+	ldr	a4, [a4, #RTLD_GLOBAL_RO_DL_HWCAP_OFFSET]
 #  else
-	ldr	a2, .Lhwcap
-	ldr	a2, [a2, #0]
+	ldr	a4, .Lhwcap
+	ldr	a4, [a4, #0]
 #  endif
 # endif
 #endif
 
 #ifdef __SOFTFP__
-	tst	a2, #HWCAP_ARM_VFP
+	tst	a4, #HWCAP_ARM_VFP
 	beq	.Lno_vfp
 #endif
 
@@ -98,7 +103,7 @@ ENTRY (__longjmp)
 .Lno_vfp:
 
 #ifndef ARM_ASSUME_NO_IWMMXT
-	tst	a2, #HWCAP_ARM_IWMMXT
+	tst	a4, #HWCAP_ARM_IWMMXT
 	beq	.Lno_iwmmxt
 
 	/* Restore the call-preserved iWMMXt registers.  */
@@ -118,6 +123,14 @@ ENTRY (__longjmp)
 .Lno_iwmmxt:
 #endif
 
+	/* longjmp_target probe expects longjmp first argument (4@r0), second
+	   argument (-4@r1), and target address (4@r14), respectively.  */
+	LIBC_PROBE (longjmp_target, 3, 4@r0, -4@r1, 4@r14)
+
+	movs	r0, r1		/* get the return value in place */
+	it	eq
+	moveq	r0, #1		/* can't let setjmp() return zero! */
+
 	DO_RET(lr)
 
 #ifdef NEED_HWCAP
diff --git a/ports/sysdeps/arm/include/bits/setjmp.h b/ports/sysdeps/arm/include/bits/setjmp.h
index 220dfe8..5877c1f 100644
--- a/ports/sysdeps/arm/include/bits/setjmp.h
+++ b/ports/sysdeps/arm/include/bits/setjmp.h
@@ -30,7 +30,7 @@
 # define JMP_BUF_REGLIST	{v1-v6, sl, fp}
 
 /* Index of __jmp_buf where the sp register resides.  */
-# define __JMP_BUF_SP		8
+# define __JMP_BUF_SP		0
 #endif
 
 #endif  /* include/bits/setjmp.h */
diff --git a/ports/sysdeps/arm/setjmp.S b/ports/sysdeps/arm/setjmp.S
index b0b45ed..5e55ca5 100644
--- a/ports/sysdeps/arm/setjmp.S
+++ b/ports/sysdeps/arm/setjmp.S
@@ -17,6 +17,7 @@
    <http://www.gnu.org/licenses/>.  */
 
 #include <sysdep.h>
+#include <stap-probe.h>
 #include <bits/setjmp.h>
 #include <rtld-global-offsets.h>
 #include <arm-features.h>
@@ -27,9 +28,11 @@ ENTRY (__sigsetjmp)
 #endif
 	mov	ip, r0
 
-	/* Save registers */
-	sfi_breg ip, \
-	stmia	\B!, JMP_BUF_REGLIST
+	/* setjmp probe expects sigsetjmp first argument (4@r0), second
+	   argument (-4@r1), and target address (4@r14), respectively.  */
+	LIBC_PROBE (setjmp, 3, 4@r0, -4@r1, 4@r14)
+
+	/* Save sp and lr */
 #ifdef PTR_MANGLE
 	mov	a4, sp
 	PTR_MANGLE2 (a4, a4, a3)
@@ -40,6 +43,9 @@ ENTRY (__sigsetjmp)
 	str	sp, [ip], #4
 	str	lr, [ip], #4
 #endif
+	/* Save registers */
+	sfi_breg ip, \
+	stmia	\B!, JMP_BUF_REGLIST
 
 #if !defined ARM_ASSUME_NO_IWMMXT || defined __SOFTFP__
 # define NEED_HWCAP 1
-- 
1.8.1.4

             reply	other threads:[~2014-02-05  9:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-05  9:56 Will Newton [this message]
2014-02-06 16:26 ` Carlos O'Donell
2014-02-06 16:41   ` Joseph S. Myers
2014-02-06 16:48   ` Will Newton
2014-02-06 16:54     ` Carlos O'Donell
2014-02-06 22:11 ` Roland McGrath
2014-02-07 12:38   ` Will Newton
2014-02-07 14:16     ` Andreas Schwab
2014-02-07 15:45       ` Jonathan S. Shapiro
2014-02-07 17:04       ` Joseph S. Myers
     [not found]       ` <CAAP=3QP6_TvyFdpmO9Or5E2=NFCdcUVrCGBHT3rMozRXLT4mmw@mail.gmail.com>
2014-02-10  8:54         ` Will Newton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391594162-22269-1-git-send-email-will.newton@linaro.org \
    --to=will.newton@linaro.org \
    --cc=libc-ports@sourceware.org \
    --cc=patches@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).