From: "Dmitry V. Levin" <ldv@altlinux.org>
To: libc-stable@sourceware.org
Subject: [2.27 COMMITTED] arm: CVE-2020-6096: fix memcpy and memmove for negative length [BZ #25620]
Date: Tue, 17 Nov 2020 00:01:03 +0300 [thread overview]
Message-ID: <20201116210103.GF28063@altlinux.org> (raw)
From: Evgeny Eremin <e.eremin@omprussia.ru>
Unsigned branch instructions could be used for r2 to fix the wrong
behavior when a negative length is passed to memcpy and memmove.
This commit fixes the generic arm implementation of memcpy amd memmove.
(cherry picked from commit 79a4fa341b8a89cb03f84564fd72abaa1a2db394)
---
sysdeps/arm/memcpy.S | 24 ++++++++++--------------
sysdeps/arm/memmove.S | 24 ++++++++++--------------
2 files changed, 20 insertions(+), 28 deletions(-)
diff --git a/sysdeps/arm/memcpy.S b/sysdeps/arm/memcpy.S
index cba8609813..7b4214aae9 100644
--- a/sysdeps/arm/memcpy.S
+++ b/sysdeps/arm/memcpy.S
@@ -68,7 +68,7 @@ ENTRY(memcpy)
cfi_remember_state
subs r2, r2, #4
- blt 8f
+ blo 8f
ands ip, r0, #3
PLD( pld [r1, #0] )
bne 9f
@@ -82,7 +82,7 @@ ENTRY(memcpy)
cfi_rel_offset (r6, 4)
cfi_rel_offset (r7, 8)
cfi_rel_offset (r8, 12)
- blt 5f
+ blo 5f
CALGN( ands ip, r1, #31 )
CALGN( rsb r3, ip, #32 )
@@ -98,9 +98,9 @@ ENTRY(memcpy)
#endif
PLD( pld [r1, #0] )
-2: PLD( subs r2, r2, #96 )
+2: PLD( cmp r2, #96 )
PLD( pld [r1, #28] )
- PLD( blt 4f )
+ PLD( blo 4f )
PLD( pld [r1, #60] )
PLD( pld [r1, #92] )
@@ -108,9 +108,7 @@ ENTRY(memcpy)
4: ldmia r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
subs r2, r2, #32
stmia r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
- bge 3b
- PLD( cmn r2, #96 )
- PLD( bge 4b )
+ bhs 3b
5: ands ip, r2, #28
rsb ip, ip, #32
@@ -222,7 +220,7 @@ ENTRY(memcpy)
strbge r4, [r0], #1
subs r2, r2, ip
strb lr, [r0], #1
- blt 8b
+ blo 8b
ands ip, r1, #3
beq 1b
@@ -236,7 +234,7 @@ ENTRY(memcpy)
.macro forward_copy_shift pull push
subs r2, r2, #28
- blt 14f
+ blo 14f
CALGN( ands ip, r1, #31 )
CALGN( rsb ip, ip, #32 )
@@ -253,9 +251,9 @@ ENTRY(memcpy)
cfi_rel_offset (r10, 16)
PLD( pld [r1, #0] )
- PLD( subs r2, r2, #96 )
+ PLD( cmp r2, #96 )
PLD( pld [r1, #28] )
- PLD( blt 13f )
+ PLD( blo 13f )
PLD( pld [r1, #60] )
PLD( pld [r1, #92] )
@@ -280,9 +278,7 @@ ENTRY(memcpy)
mov ip, ip, PULL #\pull
orr ip, ip, lr, PUSH #\push
stmia r0!, {r3, r4, r5, r6, r7, r8, r10, ip}
- bge 12b
- PLD( cmn r2, #96 )
- PLD( bge 13b )
+ bhs 12b
pop {r5 - r8, r10}
cfi_adjust_cfa_offset (-20)
diff --git a/sysdeps/arm/memmove.S b/sysdeps/arm/memmove.S
index 74d3042043..b28a811912 100644
--- a/sysdeps/arm/memmove.S
+++ b/sysdeps/arm/memmove.S
@@ -85,7 +85,7 @@ ENTRY(memmove)
add r1, r1, r2
add r0, r0, r2
subs r2, r2, #4
- blt 8f
+ blo 8f
ands ip, r0, #3
PLD( pld [r1, #-4] )
bne 9f
@@ -99,7 +99,7 @@ ENTRY(memmove)
cfi_rel_offset (r6, 4)
cfi_rel_offset (r7, 8)
cfi_rel_offset (r8, 12)
- blt 5f
+ blo 5f
CALGN( ands ip, r1, #31 )
CALGN( sbcsne r4, ip, r2 ) @ C is always set here
@@ -114,9 +114,9 @@ ENTRY(memmove)
#endif
PLD( pld [r1, #-4] )
-2: PLD( subs r2, r2, #96 )
+2: PLD( cmp r2, #96 )
PLD( pld [r1, #-32] )
- PLD( blt 4f )
+ PLD( blo 4f )
PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
@@ -124,9 +124,7 @@ ENTRY(memmove)
4: ldmdb r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
subs r2, r2, #32
stmdb r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
- bge 3b
- PLD( cmn r2, #96 )
- PLD( bge 4b )
+ bhs 3b
5: ands ip, r2, #28
rsb ip, ip, #32
@@ -237,7 +235,7 @@ ENTRY(memmove)
strbge r4, [r0, #-1]!
subs r2, r2, ip
strb lr, [r0, #-1]!
- blt 8b
+ blo 8b
ands ip, r1, #3
beq 1b
@@ -251,7 +249,7 @@ ENTRY(memmove)
.macro backward_copy_shift push pull
subs r2, r2, #28
- blt 14f
+ blo 14f
CALGN( ands ip, r1, #31 )
CALGN( rsb ip, ip, #32 )
@@ -268,9 +266,9 @@ ENTRY(memmove)
cfi_rel_offset (r10, 16)
PLD( pld [r1, #-4] )
- PLD( subs r2, r2, #96 )
+ PLD( cmp r2, #96 )
PLD( pld [r1, #-32] )
- PLD( blt 13f )
+ PLD( blo 13f )
PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
@@ -295,9 +293,7 @@ ENTRY(memmove)
mov r4, r4, PUSH #\push
orr r4, r4, r3, PULL #\pull
stmdb r0!, {r4 - r8, r10, ip, lr}
- bge 12b
- PLD( cmn r2, #96 )
- PLD( bge 13b )
+ bhs 12b
pop {r5 - r8, r10}
cfi_adjust_cfa_offset (-20)
--
ldv
reply other threads:[~2020-11-16 21:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116210103.GF28063@altlinux.org \
--to=ldv@altlinux.org \
--cc=libc-stable@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).