From: Patrick Palka <ppalka@redhat.com>
To: Patrick Palka <ppalka@redhat.com>
Cc: gcc-patches@gcc.gnu.org, libstdc++@gcc.gnu.org
Subject: Re: [PATCH 3/4] libstdc++: Add floating-point std::to_chars implementation
Date: Sun, 19 Jul 2020 23:37:21 -0400 (EDT) [thread overview]
Message-ID: <alpine.DEB.2.23.453.2007192126500.1521071@idea> (raw)
In-Reply-To: <alpine.DEB.2.23.453.2007171210350.1521071@idea>
On Fri, 17 Jul 2020, Patrick Palka wrote:
> On Fri, 17 Jul 2020, Patrick Palka wrote:
>
> > On Wed, 15 Jul 2020, Patrick Palka wrote:
> >
> > > On Tue, 14 Jul 2020, Patrick Palka wrote:
> > >
> > > > This implements the floating-point std::to_chars overloads for float,
> > > > double and long double. We use the Ryu library to compute the shortest
> > > > round-trippable fixed and scientific forms of a number for float, double
> > > > and long double. We also use Ryu for performing fixed and scientific
> > > > formatting of float and double. For formatting long double with an
> > > > explicit precision argument we use a printf fallback. Hexadecimal
> > > > formatting for float, double and long double is implemented from
> > > > scratch.
> > > >
> > > > The supported long double binary formats are float64 (same as double),
> > > > float80 (x86 extended precision), float128 and ibm128.
> > > >
> > > > Much of the complexity of the implementation is in computing the exact
> > > > output length before handing it off to Ryu (which doesn't do bounds
> > > > checking). In some cases it's hard to compute the output length before
> > > > the fact, so in these cases we instead compute an upper bound on the
> > > > output length and use a sufficiently-sized intermediate buffer (if the
> > > > output range is smaller than the upper bound).
> > > >
> > > > Another source of complexity is in the general-with-precision formatting
> > > > mode, where we need to do zero-trimming of the string returned by Ryu, and
> > > > where we also take care to avoid having to format the string a second
> > > > time when the general formatting mode resolves to fixed.
> > > >
> > > > Tested on x86_64-pc-linux-gnu, aarch64-unknown-linux-gnu,
> > > > s390x-ibm-linux-gnu, and powerpc64-unknown-linux-gnu.
> > > >
> > > > libstdc++-v3/ChangeLog:
> > > >
> > > > * acinclude.m4 (libtool_VERSION): Bump to 6:29:0.
> > > > * config/abi/pre/gnu.ver: Add new exports.
> > > > * configure: Regenerate.
> > > > * include/std/charconv (to_chars): Declare the floating-point
> > > > overloads for float, double and long double.
> > > > * src/c++17/Makefile.am (sources): Add floating_to_chars.cc.
> > > > * src/c++17/Makefile.in: Regenerate.
> > > > * src/c++17/floating_to_chars.cc: New file.
> > > > * testsuite/20_util/to_chars/long_double.cc: New test.
> > > > * testsuite/util/testsuite_abi.cc: Add new symbol version.
> > >
> > > Here is v2 of this patch, which fixes a build failure on i386 due to
> > > __int128 being unavailable, by refactoring the long double binary format
> > > selection to avoid referring to __int128 when it doesn't exist. The
> > > patch also makes the hex formatting for 80-bit long double use uint64_t
> > > instead of __int128 since the mantissa has exactly 64 bits in this case.
> >
> > Here's v3 which just makes some minor stylistic adjustments, and most
> > notably replaces the use of _GLIBCXX_DEBUG with _GLIBCXX_ASSERTIONS
> > since we just want to enable __glibcxx_assert and not all of debug mode.
>
> Here's v4, which should now correctly support using <charconv> with
> -mlong-double-64 on targets with a large default long double type.
> This is done by defining the long double to_chars overloads as inline
> wrappers around the double overloads within <charconv> whenever
> __DBL_MANT_DIG__ equals __LDBL_MANT_DIG__.
>
> -- >8 --
>
> Subject: [PATCH 3/4] libstdc++: Add floating-point std::to_chars
> implementation
>
> This implements the floating-point std::to_chars overloads for float,
> double and long double. We use the Ryu library to compute the shortest
> round-trippable fixed and scientific forms of a number for float, double
> and long double. We also use Ryu for performing explicit-precision
> fixed and scientific formatting of float and double. For
> explicit-precision formatting of long double we fall back to using
> printf. Hexadecimal formatting for float, double and long double is
> implemented from scratch.
>
> The supported long double binary formats are binary64, binary80 (x86
> 80-bit extended precision), binary128 and ibm128.
>
> Much of the complexity of the implementation is in computing the exact
> output length before handing it off to Ryu (which doesn't do bounds
> checking). In some cases it's hard to compute the output length
> beforehand, so in these cases we instead compute an upper bound on the
> output length and use a sufficiently-sized intermediate buffer if
> necessary.
>
> Another source of complexity is in the general-with-precision formatting
> mode, where we need to do zero-trimming of the string returned by Ryu,
> and where we also take care to avoid having to format the string a
> second time when the general formatting mode resolves to fixed.
>
> This implementation is non-conforming in a couple of ways:
>
> 1. For the shortest hexadecimal formatting, we currently follow the
> Microsoft implementation's approach of being consistent with the
> output of printf's '%a' specifier at the expense of sometimes not
> printing the shortest representation. For example, the shortest hex
> form of 1.08p+0 is 2.1p-1, but we output the former instead of the
> latter, as does printf.
>
> 2. The Ryu routines for doing shortest formatting on types larger than
> binary64 use the __int128 type, and some targets (e.g. i386) have a
> large long double type but lack __int128. For such targets we make
> the long double to_chars overloads go through the double overloads,
> which means we lose precision in the output. (The mantissa of long
> double is 64 bits on i386, so I think we could potentially fix this
> by writing a specialized version of the generic Ryu formatting
> routine which works with uint64_t instead of __int128.)
>
> 3. The __ibm128 shortest formatting routines don't guarantee
> round-trippability if the difference between the high- and low-order
> exponent is too large. This is because we treat the type as if it
> has a contiguous 105-bit mantissa by merging the high- and low-order
> mantissas, so we potentially lose precision from the low-order part.
> Although this precision-dropping behavior is non-conforming, it seems
> consistent with how printf formats __ibm128.
>
> libstdc++-v3/ChangeLog:
>
> * acinclude.m4 (libtool_VERSION): Bump to 6:29:0.
> * config/abi/pre/gnu.ver: Add new exports.
> * configure: Regenerate.
> * include/std/charconv (to_chars): Declare the floating-point
> overloads for float, double and long double.
> * src/c++17/Makefile.am (sources): Add floating_to_chars.cc.
> * src/c++17/Makefile.in: Regenerate.
> * src/c++17/floating_to_chars.cc: New file.
> * testsuite/20_util/to_chars/long_double.cc: New test.
> * testsuite/util/testsuite_abi.cc: Add new symbol version.
> ---
> libstdc++-v3/acinclude.m4 | 2 +-
> libstdc++-v3/config/abi/pre/gnu.ver | 12 +
> libstdc++-v3/configure | 2 +-
> libstdc++-v3/include/std/charconv | 43 +
> libstdc++-v3/src/c++17/Makefile.am | 1 +
> libstdc++-v3/src/c++17/Makefile.in | 5 +-
> libstdc++-v3/src/c++17/floating_to_chars.cc | 1514 +++++++++++++++++
> .../testsuite/20_util/to_chars/long_double.cc | 197 +++
> libstdc++-v3/testsuite/util/testsuite_abi.cc | 3 +-
> 9 files changed, 1774 insertions(+), 5 deletions(-)
> create mode 100644 libstdc++-v3/src/c++17/floating_to_chars.cc
> create mode 100644 libstdc++-v3/testsuite/20_util/to_chars/long_double.cc
>
> diff --git a/libstdc++-v3/acinclude.m4 b/libstdc++-v3/acinclude.m4
> index ee5e0336f2c..e3926e1c9c2 100644
> --- a/libstdc++-v3/acinclude.m4
> +++ b/libstdc++-v3/acinclude.m4
> @@ -3846,7 +3846,7 @@ changequote([,])dnl
> fi
>
> # For libtool versioning info, format is CURRENT:REVISION:AGE
> -libtool_VERSION=6:28:0
> +libtool_VERSION=6:29:0
>
> # Everything parsed; figure out what files and settings to use.
> case $enable_symvers in
> diff --git a/libstdc++-v3/config/abi/pre/gnu.ver b/libstdc++-v3/config/abi/pre/gnu.ver
> index edf4485e607..9a1bcfd25d1 100644
> --- a/libstdc++-v3/config/abi/pre/gnu.ver
> +++ b/libstdc++-v3/config/abi/pre/gnu.ver
> @@ -2299,6 +2299,18 @@ GLIBCXX_3.4.28 {
>
> } GLIBCXX_3.4.27;
>
> +GLIBCXX_3.4.29 {
> + # to_chars(char*, char*, [float|double|long double])
> + _ZSt8to_charsPcS_[fdeg];
> +
> + # to_chars(char*, char*, [float|double|long double], chars_format)
> + _ZSt8to_charsPcS_[fdeg]St12chars_format;
> +
> + # to_chars(char*, char*, [float|double|long double], chars_format, int)
> + _ZSt8to_charsPcS_[fdeg]St12chars_formati;
> +
> +} GLIBCXX_3.4.28;
> +
> # Symbols in the support library (libsupc++) have their own tag.
> CXXABI_1.3 {
>
> diff --git a/libstdc++-v3/configure b/libstdc++-v3/configure
> index dd54bd406a9..73f771e7335 100755
> --- a/libstdc++-v3/configure
> +++ b/libstdc++-v3/configure
> @@ -75231,7 +75231,7 @@ $as_echo "$as_me: WARNING: === Symbol versioning will be disabled." >&2;}
> fi
>
> # For libtool versioning info, format is CURRENT:REVISION:AGE
> -libtool_VERSION=6:28:0
> +libtool_VERSION=6:29:0
>
> # Everything parsed; figure out what files and settings to use.
> case $enable_symvers in
> diff --git a/libstdc++-v3/include/std/charconv b/libstdc++-v3/include/std/charconv
> index cc7dd0e3758..bd59924f7e7 100644
> --- a/libstdc++-v3/include/std/charconv
> +++ b/libstdc++-v3/include/std/charconv
> @@ -688,6 +688,49 @@ namespace __detail
> operator^=(chars_format& __lhs, chars_format __rhs) noexcept
> { return __lhs = __lhs ^ __rhs; }
>
> + // Floating-point std::to_chars
> +
> + // Overloads for float.
> + to_chars_result to_chars(char* __first, char* __last, float __value) noexcept;
> + to_chars_result to_chars(char* __first, char* __last, float __value,
> + chars_format __fmt) noexcept;
> + to_chars_result to_chars(char* __first, char* __last, float __value,
> + chars_format __fmt, int __precision) noexcept;
> +
> + // Overloads for double.
> + to_chars_result to_chars(char* __first, char* __last, double __value) noexcept;
> + to_chars_result to_chars(char* __first, char* __last, double __value,
> + chars_format __fmt) noexcept;
> + to_chars_result to_chars(char* __first, char* __last, double __value,
> + chars_format __fmt, int __precision) noexcept;
> +
> + // Overloads for long double.
> + to_chars_result to_chars(char* __first, char* __last, long double __value)
> + noexcept;
> + to_chars_result to_chars(char* __first, char* __last, long double __value,
> + chars_format __fmt) noexcept;
> + to_chars_result to_chars(char* __first, char* __last, long double __value,
> + chars_format __fmt, int __precision) noexcept;
> +
> + // If long double has the same binary format as double, then we just define
> + // the long double overloads as wrappers around the corresponding double
> + // overloads.
> +#if __LDBL_MANT_DIG__ == __DBL_MANT_DIG__
> + inline to_chars_result
> + to_chars(char* __first, char* __last, long double __value) noexcept
> + { return to_chars(__first, __last, double(__value)); }
> +
> + inline to_chars_result
> + to_chars(char* __first, char* __last, long double __value,
> + chars_format __fmt) noexcept
> + { return to_chars(__first, __last, double(__value), __fmt); }
> +
> + inline to_chars_result
> + to_chars(char* __first, char* __last, long double __value,
> + chars_format __fmt, int __precision) noexcept
> + { return to_chars(__first, __last, double(__value), __fmt, __precision); }
> +#endif
Hmm, I think this approach for supporting -mlong-double-64 might
introduce an ODR violation because each long double to_chars overload
could potentially have two different definitions available in a program,
one out-of-line in floating_to_chars.cc (compiled without
-mlong-double-64) and another inline in <charconv> (compiled with
-mlong-double-64)..
next prev parent reply other threads:[~2020-07-20 3:37 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-14 19:41 [PATCH 1/4] libstdc++: Import parts of the Ryu library Patrick Palka
2020-07-14 19:41 ` [PATCH 2/4] libstdc++: Apply modifications to our local copy of Ryu Patrick Palka
2020-07-15 18:12 ` Patrick Palka
2020-12-17 14:35 ` Jonathan Wakely
2020-07-14 19:41 ` [PATCH 3/4] libstdc++: Add floating-point std::to_chars implementation Patrick Palka
2020-07-15 18:21 ` Patrick Palka
2020-07-17 4:23 ` Patrick Palka
2020-07-17 16:24 ` Patrick Palka
2020-07-20 3:37 ` Patrick Palka [this message]
2020-07-20 12:31 ` Jonathan Wakely
2020-07-20 12:53 ` Patrick Palka
2020-07-20 14:13 ` Jonathan Wakely
2020-07-20 14:46 ` Patrick Palka
2020-07-22 15:56 ` Patrick Palka
2020-08-19 21:57 ` Patrick Palka
2020-12-17 14:32 ` Jonathan Wakely
2020-12-18 4:13 ` Patrick Palka
2020-12-18 13:24 ` Christophe Lyon
2020-12-18 14:58 ` Jonathan Wakely
2020-12-18 15:00 ` Patrick Palka
2020-12-18 16:52 ` Christophe Lyon
2020-12-18 17:03 ` Patrick Palka
2020-12-18 18:28 ` Christophe Lyon
2020-12-20 21:44 ` Maciej W. Rozycki
2020-12-21 17:06 ` Patrick Palka
2020-12-21 23:09 ` Maciej W. Rozycki
2020-07-14 19:41 ` [PATCH 4/4] libstdc++: Import MSVC floating-point std::to_chars testcases Patrick Palka
2020-07-14 19:49 ` Patrick Palka
2020-12-17 14:37 ` Jonathan Wakely
2020-07-14 19:46 ` [PATCH 1/4] libstdc++: Import parts of the Ryu library Patrick Palka
2020-07-25 11:44 ` Václav Haisman
2020-07-26 13:09 ` Patrick Palka
2020-12-17 14:34 ` Jonathan Wakely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.23.453.2007192126500.1521071@idea \
--to=ppalka@redhat.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=libstdc++@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).