public inbox for lvm2-cvs@sourceware.org
help / color / mirror / Atom feed
* LVM2/test t-lvconvert-mirror.sh t-mirror-lvcon ...
@ 2010-04-12 19:32 mornfall
  0 siblings, 0 replies; 2+ messages in thread
From: mornfall @ 2010-04-12 19:32 UTC (permalink / raw)
  To: lvm-devel, lvm2-cvs

CVSROOT:	/cvs/lvm2
Module name:	LVM2
Changes by:	mornfall@sourceware.org	2010-04-12 19:32:58

Modified files:
	test           : t-lvconvert-mirror.sh 
Removed files:
	test           : t-mirror-lvconvert-usage.sh 

Log message:
	Absorb t-mirror-lvconvert-usage into t-lvconvert-mirror.

Patches:
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/test/t-lvconvert-mirror.sh.diff?cvsroot=lvm2&r1=1.1&r2=1.2
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/test/t-mirror-lvconvert-usage.sh.diff?cvsroot=lvm2&r1=1.2&r2=NONE

--- LVM2/test/t-lvconvert-mirror.sh	2010/04/12 19:16:24	1.1
+++ LVM2/test/t-lvconvert-mirror.sh	2010/04/12 19:32:58	1.2
@@ -23,6 +23,11 @@
 lvconvert -m-1 $vg/$lv1
 check linear $vg $lv1
 lvremove -ff $vg
+# and now try removing a specific leg (bz453643)
+lvcreate -l2 -m1 -n $lv1 $vg $dev1 $dev2 $dev3:0-1
+lvconvert -m0 $vg/$lv1 $dev2
+check lv_on $vg/$lv1 $dev1
+lvremove -ff $vg
 
 # convert from disklog to corelog, active
 lvcreate -l2 -m1 -n $lv1 $vg $dev1 $dev2 $dev3:0-1
@@ -55,3 +60,11 @@
 lvcreate -l2 -n $lv1 $vg $dev1
 not lvconvert -m+1 --mirrorlog core $vg/$lv1 $dev1
 lvremove -ff $vg
+
+lvcreate -l2 -m2 -n $lv1 $vg $dev1 $dev2 $dev4 $dev3:0-1
+lvconvert -m-1 $vg/$lv1 $dev1
+check mirror_images_on $lv1 $dev2 $dev4
+lvconvert -m-1 $vg/$lv1 $dev2
+check linear $vg $lv1
+check lv_on $vg/$lv1 $dev4
+


^ permalink raw reply	[flat|nested] 2+ messages in thread
* LVM2/test t-lvconvert-mirror.sh t-mirror-lvcon ...
@ 2010-04-22 15:39 jbrassow
  0 siblings, 0 replies; 2+ messages in thread
From: jbrassow @ 2010-04-22 15:39 UTC (permalink / raw)
  To: lvm-devel, lvm2-cvs

CVSROOT:	/cvs/lvm2
Module name:	LVM2
Changes by:	jbrassow@sourceware.org	2010-04-22 15:39:43

Modified files:
	test           : t-lvconvert-mirror.sh t-mirror-lvconvert.sh 

Log message:
	The following tests in the testsuite have race conditions:
	1) Test that the primary mirror image cannot be removed while
	the mirror set is sync'ing.
	2) Test that you cannot start a second mirror up-convert while
	one is already in progress.
	
	The trouble is that if the sync/conversion finishes before the
	tests occur, the tests will fail by why of success where there
	should have been failure.  This means the sync/conversion must
	happen very quickly, but this is possible because the test
	mirrors we are creating are so small.
	
	In order to decrease the likelyhood of these test failing (or
	more correctly, failing to test the right thing), I've increase
	the size of the mirrors.  It will still be remotely possible that
	the tests will fail (by way of failing to test the right thing).
	If this continues to happen, more involved mechanisms will need
	to be put in place.  (Perhaps these will still be created, but
	this change should be a remedy until that time.)

Patches:
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/test/t-lvconvert-mirror.sh.diff?cvsroot=lvm2&r1=1.3&r2=1.4
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/test/t-mirror-lvconvert.sh.diff?cvsroot=lvm2&r1=1.25&r2=1.26

--- LVM2/test/t-lvconvert-mirror.sh	2010/04/21 13:55:08	1.3
+++ LVM2/test/t-lvconvert-mirror.sh	2010/04/22 15:39:40	1.4
@@ -10,7 +10,7 @@
 # Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
 . ./test-utils.sh
-aux prepare_vg 5 80
+aux prepare_vg 5 200
 
 # convert from linear to 2-way mirror
 lvcreate -l2 -n $lv1 $vg $dev1
@@ -65,7 +65,7 @@
 # Test pulling primary image before mirror in-sync (should fail)
 # Test pulling primary image after mirror in-sync (should work)
 # Test that the correct devices remain in the mirror
-lvcreate -l8 -m2 -n $lv1 $vg $dev1 $dev2 $dev4 $dev3:0-1
+lvcreate -l20 -m2 -n $lv1 $vg $dev1 $dev2 $dev4 $dev3:0
 # FIXME:
 #  This is somewhat timing dependent - sync /could/ finish before
 #  we get a chance to have this command fail
--- LVM2/test/t-mirror-lvconvert.sh	2010/04/21 14:04:26	1.25
+++ LVM2/test/t-mirror-lvconvert.sh	2010/04/22 15:39:40	1.26
@@ -112,7 +112,7 @@
   ! grep tmp out
 }
 
-aux prepare_vg 5
+aux prepare_vg 5 200
 
 # ---------------------------------------------------------------------
 # Common environment setup/cleanup for each sub testcases
@@ -155,7 +155,7 @@
 # add 1 mirror
 prepare_lvs_
 lvs -a -o+devices $vg
-lvcreate -l5 -m1 -n $lv1 $vg $dev1 $dev2 $dev3:0
+lvcreate -l15 -m1 -n $lv1 $vg $dev1 $dev2 $dev3:0
 lvs -a -o+devices $vg
 check_mirror_count_ $vg/$lv1 2
 check_mirror_log_ $vg/$lv1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2010-04-22 15:39 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-12 19:32 LVM2/test t-lvconvert-mirror.sh t-mirror-lvcon mornfall
2010-04-22 15:39 jbrassow

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).