public inbox for newlib-cvs@sourceware.org help / color / mirror / Atom feed
From: Michael Frysinger <vapier@sourceware.org> To: newlib-cvs@sourceware.org Subject: [newlib-cygwin] newlib: drop autoconf-2.59 workaround Date: Wed, 19 Jan 2022 00:33:42 +0000 (GMT) [thread overview] Message-ID: <20220119003342.DEE253858409@sourceware.org> (raw) https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;h=ac3d869afbf9f26cd6ea42e1c5acc0e498f6556b commit ac3d869afbf9f26cd6ea42e1c5acc0e498f6556b Author: Mike Frysinger <vapier@gentoo.org> Date: Mon Jan 17 19:28:48 2022 -0500 newlib: drop autoconf-2.59 workaround As the file comments say, this was a backport of an autoconf-2.60 fix, and shouldn't matter for >autoconf-2.59 versions. Drop it since we use and require autoconf-2.69 now. Diff: --- newlib/confsubdir.m4 | 127 --------------------------------------------------- 1 file changed, 127 deletions(-) diff --git a/newlib/confsubdir.m4 b/newlib/confsubdir.m4 deleted file mode 100644 index 4e1e8c464..000000000 --- a/newlib/confsubdir.m4 +++ /dev/null @@ -1,127 +0,0 @@ -dnl Fix Autoconf-2.59 AC_CONFIG_SUBDIRS whitespace mangling, -dnl by overriding the broken internal Autoconf macro with a -dnl backport of the 2.60 fix. -dnl -dnl This file should be a no-op for Autoconf versions != 2.59. -dnl It can be removed once the complete tree has moved to a -dnl newer Autoconf version. - -dnl m4_PACKAGE_VERSION is an undocumented Autoconf macro. -dnl We use it because this fix is intended for 2.59 only. -dnl A feature test for the broken AC_CONFIG_SUBDIRS instead -dnl would be better but is tricky. -dnl -dnl Use ifdef/ifelse over m4_ifdef/m4_ifelse to be clean for 2.13. -dnl Redefine AC_CONFIG_SUBDIRS so aclocal pulls in this file -dnl when needed. - -ifdef([m4_PACKAGE_VERSION], -[ifelse(m4_PACKAGE_VERSION, [2.59], [ - -dnl Redefine AC_CONFIG_SUBDIRS so this file is picked up if needed. -AC_DEFUN([AC_CONFIG_SUBDIRS], defn([AC_CONFIG_SUBDIRS])) - -dnl Override the broken macro. -# _AC_OUTPUT_SUBDIRS -# ------------------ -# This is a subroutine of AC_OUTPUT, but it does not go into -# config.status, rather, it is called after running config.status. -m4_define([_AC_OUTPUT_SUBDIRS], -[ -# -# CONFIG_SUBDIRS section, as fixed in confsubdir.m4. -# -if test "$no_recursion" != yes; then - - # Remove --cache-file and --srcdir arguments so they do not pile up. - ac_sub_configure_args= - ac_prev= - eval "set x $ac_configure_args" - shift - for ac_arg - do - if test -n "$ac_prev"; then - ac_prev= - continue - fi - case $ac_arg in - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \ - | --c=*) - ;; - --config-cache | -C) - ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - ;; - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - ;; - *) - case $ac_arg in - *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;; - esac - done - - # Always prepend --prefix to ensure using the same prefix - # in subdir configurations. - ac_arg="--prefix=$prefix" - case $ac_arg in - *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - ac_sub_configure_args="$ac_arg $ac_sub_configure_args" - - ac_popdir=`pwd` - for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue - - # Do not complain, so a configure script can configure whichever - # parts of a large source tree are present. - test -d "$srcdir/$ac_dir" || continue - - AC_MSG_NOTICE([configuring in $ac_dir]) - AS_MKDIR_P(["$ac_dir"]) - _AC_SRCPATHS(["$ac_dir"]) - - cd "$ac_dir" - - # Check for guested configure; otherwise get Cygnus style configure. - if test -f "$ac_srcdir/configure.gnu"; then - ac_sub_configure=$ac_srcdir/configure.gnu - elif test -f "$ac_srcdir/configure"; then - ac_sub_configure=$ac_srcdir/configure - elif test -f "$ac_srcdir/configure.in"; then - # This should be Cygnus configure. - ac_sub_configure=$ac_aux_dir/configure - else - AC_MSG_WARN([no configuration information is in $ac_dir]) - ac_sub_configure= - fi - - # The recursion is here. - if test -n "$ac_sub_configure"; then - # Make the cache file name correct relative to the subdirectory. - case $cache_file in - [[\\/]]* | ?:[[\\/]]* ) ac_sub_cache_file=$cache_file ;; - *) # Relative path. - ac_sub_cache_file=$ac_top_builddir$cache_file ;; - esac - - AC_MSG_NOTICE([running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir]) - # The eval makes quoting arguments work. - eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ - --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || - AC_MSG_ERROR([$ac_sub_configure failed for $ac_dir]) - fi - - cd "$ac_popdir" - done -fi -])# _AC_OUTPUT_SUBDIRS -])])
reply other threads:[~2022-01-19 0:33 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220119003342.DEE253858409@sourceware.org \ --to=vapier@sourceware.org \ --cc=newlib-cvs@sourceware.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).