public inbox for newlib-cvs@sourceware.org
help / color / mirror / Atom feed
* [newlib-cygwin] newlib: libc: merge sys/ trampoline up a level
@ 2022-01-26 9:11 Michael Frysinger
0 siblings, 0 replies; only message in thread
From: Michael Frysinger @ 2022-01-26 9:11 UTC (permalink / raw)
To: newlib-cvs
https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;h=fbfeebc221556d70ab473b153a44c92260c3caf0
commit fbfeebc221556d70ab473b153a44c92260c3caf0
Author: Mike Frysinger <vapier@gentoo.org>
Date: Sat Jan 22 23:10:46 2022 -0500
newlib: libc: merge sys/ trampoline up a level
The sys/{configure,Makefile} files exist to fan out to the specific
sys/$arch/ subdir, and to possibly generate a crt0. We already have
all that same info in the libc/ dir itself, so by moving the recursive
configure and make calls into it, we can cut off some of this logic
entirely and save the overhead.
For arches that don't have a sys subdir, it means they can skip the
logic entirely.
The sys subdir itself is kept for the crt0 logic, for now. We'll try
and clean that up next.
Diff:
---
newlib/libc/Makefile.am | 5 +-
newlib/libc/Makefile.in | 13 +-
newlib/libc/argz/Makefile.in | 1 +
newlib/libc/configure | 126 +-
newlib/libc/configure.ac | 43 +-
newlib/libc/ctype/Makefile.in | 1 +
newlib/libc/errno/Makefile.in | 1 +
newlib/libc/iconv/Makefile.in | 1 +
newlib/libc/iconv/ccs/Makefile.in | 1 +
newlib/libc/iconv/ccs/binary/Makefile.in | 1 +
newlib/libc/iconv/ces/Makefile.in | 1 +
newlib/libc/iconv/lib/Makefile.in | 1 +
newlib/libc/locale/Makefile.in | 1 +
newlib/libc/misc/Makefile.in | 1 +
newlib/libc/posix/Makefile.in | 1 +
newlib/libc/reent/Makefile.in | 1 +
newlib/libc/search/Makefile.in | 1 +
newlib/libc/signal/Makefile.in | 1 +
newlib/libc/ssp/Makefile.in | 1 +
newlib/libc/stdio/Makefile.in | 1 +
newlib/libc/stdio64/Makefile.in | 1 +
newlib/libc/stdlib/Makefile.in | 1 +
newlib/libc/string/Makefile.in | 1 +
newlib/libc/sys/Makefile.am | 21 -
newlib/libc/sys/Makefile.in | 374 +-
newlib/libc/sys/aclocal.m4 | 1178 ---
newlib/libc/sys/configure | 14428 -----------------------------
newlib/libc/sys/configure.ac | 63 -
newlib/libc/syscalls/Makefile.in | 1 +
newlib/libc/time/Makefile.in | 1 +
newlib/libc/unix/Makefile.in | 1 +
newlib/libc/xdr/Makefile.in | 1 +
32 files changed, 269 insertions(+), 16005 deletions(-)
diff --git a/newlib/libc/Makefile.am b/newlib/libc/Makefile.am
index 4700f4699..a57c501b9 100644
--- a/newlib/libc/Makefile.am
+++ b/newlib/libc/Makefile.am
@@ -38,9 +38,12 @@ endif
# The order of SUBDIRS is important for the integrated documentation.
# Do not change the order without considering the doc impact.
-SUBDIRS = argz stdlib ctype search $(STDIO_SUBDIR) $(STDIO64_SUBDIR) string $(SIGNAL_SUBDIR) time locale sys reent \
+SUBDIRS = argz stdlib ctype search $(STDIO_SUBDIR) $(STDIO64_SUBDIR) string $(SIGNAL_SUBDIR) sys time locale reent \
errno misc $(UNIX_SUBDIR) $(POSIX_SUBDIR) $(SYSCALLS_SUBDIR) $(NEWLIB_ICONV_DIRS) \
$(XDR_SUBDIR) ssp
+if HAVE_SYS_DIR
+SUBDIRS += $(SYS_DIR)
+endif
if HAVE_LIBC_MACHINE_DIR
SUBDIRS += $(LIBC_MACHINE_DIR)
endif
diff --git a/newlib/libc/Makefile.in b/newlib/libc/Makefile.in
index 832d4bf28..427faefc0 100644
--- a/newlib/libc/Makefile.in
+++ b/newlib/libc/Makefile.in
@@ -90,7 +90,8 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-@HAVE_LIBC_MACHINE_DIR_TRUE@am__append_1 = $(LIBC_MACHINE_DIR)
+@HAVE_SYS_DIR_TRUE@am__append_1 = $(SYS_DIR)
+@HAVE_LIBC_MACHINE_DIR_TRUE@am__append_2 = $(LIBC_MACHINE_DIR)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../config/depstand.m4 \
@@ -305,8 +306,8 @@ ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = argz stdlib ctype search stdio stdio64 string signal \
- time locale sys reent errno misc unix posix syscalls iconv xdr \
- ssp @LIBC_MACHINE_DIR@ .
+ sys time locale reent errno misc unix posix syscalls iconv xdr \
+ ssp @SYS_DIR@ @LIBC_MACHINE_DIR@ .
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
@@ -390,6 +391,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
@@ -468,9 +470,10 @@ top_srcdir = @top_srcdir@
# NB: This must come last to avoid parallel build issues with current lib.a
# accumulation logic.
SUBDIRS = argz stdlib ctype search $(STDIO_SUBDIR) $(STDIO64_SUBDIR) \
- string $(SIGNAL_SUBDIR) time locale sys reent errno misc \
+ string $(SIGNAL_SUBDIR) sys time locale reent errno misc \
$(UNIX_SUBDIR) $(POSIX_SUBDIR) $(SYSCALLS_SUBDIR) \
- $(NEWLIB_ICONV_DIRS) $(XDR_SUBDIR) ssp $(am__append_1) .
+ $(NEWLIB_ICONV_DIRS) $(XDR_SUBDIR) ssp $(am__append_1) \
+ $(am__append_2) .
noinst_DATA = $(CRT0)
@USE_LIBTOOL_TRUE@noinst_LTLIBRARIES = libc.la
@USE_LIBTOOL_FALSE@SUBLIBS = \
diff --git a/newlib/libc/argz/Makefile.in b/newlib/libc/argz/Makefile.in
index 5069abd1a..b62fa7c78 100644
--- a/newlib/libc/argz/Makefile.in
+++ b/newlib/libc/argz/Makefile.in
@@ -300,6 +300,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/configure b/newlib/libc/configure
index 3801fb1ac..e14f032c5 100755
--- a/newlib/libc/configure
+++ b/newlib/libc/configure
@@ -643,6 +643,10 @@ ENABLE_NEWLIB_ICONV_TRUE
HAVE_LONG_DOUBLE_FALSE
HAVE_LONG_DOUBLE_TRUE
LIBC_SYS_LIB
+HAVE_SYS_DIR_FALSE
+HAVE_SYS_DIR_TRUE
+SYS_DIR
+subdirs
HAVE_UNIX_DIR_FALSE
HAVE_UNIX_DIR_TRUE
LIBC_UNIX_LIB
@@ -670,7 +674,6 @@ HAVE_SIGNAL_DIR_TRUE
LIBC_SIGNAL_DEF
LIBC_SIGNAL_LIB
CRT0
-subdirs
CPP
OTOOL64
OTOOL
@@ -854,7 +857,34 @@ LDFLAGS
LIBS
CPPFLAGS
CPP'
-ac_subdirs_all='sys
+ac_subdirs_all='sys/a29khif
+sys/amdgcn
+sys/arm
+sys/d10v
+sys/decstation
+sys/epiphany
+sys/h8300hms
+sys/h8500hms
+sys/linux
+sys/m88kbug
+sys/mmixware
+sys/netware
+sys/or1k
+sys/phoenix
+sys/rdos
+sys/rtems
+sys/sh
+sys/sparc64
+sys/sun4
+sys/sysmec
+sys/sysnec810
+sys/sysnecv850
+sys/sysvi386
+sys/sysvnecv70
+sys/tic80
+sys/tirtos
+sys/w65
+sys/z8ksim
machine/a29k
machine/aarch64
machine/amdgcn
@@ -11754,7 +11784,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11757 "configure"
+#line 11787 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11860,7 +11890,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11863 "configure"
+#line 11893 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12099,11 +12129,6 @@ CC="$lt_save_CC"
fi
-
-
-subdirs="$subdirs sys"
-
-
CRT0=
if test "x${have_crt0}" = "xyes"; then
CRT0=crt0.o
@@ -12255,13 +12280,85 @@ fi
LIBC_SYS_LIB=
if test -n "${sys_dir}"; then
+ case ${sys_dir} in
+ a29khif)
+
+subdirs="$subdirs sys/a29khif"
+ ;;
+ amdgcn) subdirs="$subdirs sys/amdgcn"
+ ;;
+ arm) subdirs="$subdirs sys/arm"
+ ;;
+ d10v) subdirs="$subdirs sys/d10v"
+ ;;
+ decstation) subdirs="$subdirs sys/decstation"
+ ;;
+ epiphany) subdirs="$subdirs sys/epiphany"
+ ;;
+ h8300hms) subdirs="$subdirs sys/h8300hms"
+ ;;
+ h8500hms) subdirs="$subdirs sys/h8500hms"
+ ;;
+ linux) subdirs="$subdirs sys/linux"
+ ;;
+ m88kbug) subdirs="$subdirs sys/m88kbug"
+ ;;
+ mmixware) subdirs="$subdirs sys/mmixware"
+ ;;
+ netware) subdirs="$subdirs sys/netware"
+ ;;
+ or1k) subdirs="$subdirs sys/or1k"
+ ;;
+ phoenix) subdirs="$subdirs sys/phoenix"
+ ;;
+ rdos) subdirs="$subdirs sys/rdos"
+ ;;
+ rtems) subdirs="$subdirs sys/rtems"
+ ;;
+ sh) subdirs="$subdirs sys/sh"
+ ;;
+ sparc64) subdirs="$subdirs sys/sparc64"
+ ;;
+ sun4) subdirs="$subdirs sys/sun4"
+ ;;
+ sysmec) subdirs="$subdirs sys/sysmec"
+ ;;
+ sysnec810) subdirs="$subdirs sys/sysnec810"
+ ;;
+ sysnecv850) subdirs="$subdirs sys/sysnecv850"
+ ;;
+ sysvi386) subdirs="$subdirs sys/sysvi386"
+ ;;
+ sysvnecv70) subdirs="$subdirs sys/sysvnecv70"
+ ;;
+ tic80) subdirs="$subdirs sys/tic80"
+ ;;
+ tirtos) subdirs="$subdirs sys/tirtos"
+ ;;
+ w65) subdirs="$subdirs sys/w65"
+ ;;
+ z8ksim) subdirs="$subdirs sys/z8ksim"
+ ;;
+ *) as_fn_error $? "unsupported sys_dir \"${sys_dir}\"" "$LINENO" 5 ;;
+ esac
+
+ SYS_DIR=sys/${sys_dir}
if test "${use_libtool}" = "yes"; then
- LIBC_SYS_LIB=sys/${sys_dir}/lib${sys_dir}.${aext}
+ LIBC_SYS_LIB=${SYS_DIR}/lib${sys_dir}.${aext}
else
- LIBC_SYS_LIB=sys/lib.${aext}
+ LIBC_SYS_LIB=${SYS_DIR}/lib.${aext}
fi
fi
+ if test x${sys_dir} != x; then
+ HAVE_SYS_DIR_TRUE=
+ HAVE_SYS_DIR_FALSE='#'
+else
+ HAVE_SYS_DIR_TRUE='#'
+ HAVE_SYS_DIR_FALSE=
+fi
+
+
@@ -12468,7 +12565,7 @@ fi
-ac_config_files="$ac_config_files Makefile argz/Makefile ctype/Makefile errno/Makefile locale/Makefile misc/Makefile reent/Makefile search/Makefile stdio/Makefile stdio64/Makefile stdlib/Makefile string/Makefile time/Makefile posix/Makefile signal/Makefile syscalls/Makefile unix/Makefile iconv/Makefile iconv/ces/Makefile iconv/ccs/Makefile iconv/ccs/binary/Makefile iconv/lib/Makefile ssp/Makefile xdr/Makefile"
+ac_config_files="$ac_config_files Makefile argz/Makefile ctype/Makefile errno/Makefile locale/Makefile misc/Makefile reent/Makefile search/Makefile stdio/Makefile stdio64/Makefile stdlib/Makefile string/Makefile time/Makefile posix/Makefile signal/Makefile syscalls/Makefile unix/Makefile iconv/Makefile iconv/ces/Makefile iconv/ccs/Makefile iconv/ccs/binary/Makefile iconv/lib/Makefile ssp/Makefile sys/Makefile xdr/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@@ -12715,6 +12812,10 @@ if test -z "${HAVE_UNIX_DIR_TRUE}" && test -z "${HAVE_UNIX_DIR_FALSE}"; then
as_fn_error $? "conditional \"HAVE_UNIX_DIR\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${HAVE_SYS_DIR_TRUE}" && test -z "${HAVE_SYS_DIR_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_SYS_DIR\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
if test -z "${HAVE_LONG_DOUBLE_TRUE}" && test -z "${HAVE_LONG_DOUBLE_FALSE}"; then
as_fn_error $? "conditional \"HAVE_LONG_DOUBLE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
@@ -13588,6 +13689,7 @@ do
"iconv/ccs/binary/Makefile") CONFIG_FILES="$CONFIG_FILES iconv/ccs/binary/Makefile" ;;
"iconv/lib/Makefile") CONFIG_FILES="$CONFIG_FILES iconv/lib/Makefile" ;;
"ssp/Makefile") CONFIG_FILES="$CONFIG_FILES ssp/Makefile" ;;
+ "sys/Makefile") CONFIG_FILES="$CONFIG_FILES sys/Makefile" ;;
"xdr/Makefile") CONFIG_FILES="$CONFIG_FILES xdr/Makefile" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
diff --git a/newlib/libc/configure.ac b/newlib/libc/configure.ac
index 2521d6cec..290e25929 100644
--- a/newlib/libc/configure.ac
+++ b/newlib/libc/configure.ac
@@ -58,8 +58,6 @@ if test "${use_libtool}" = "yes"; then
LT_INIT([win32-dll])
fi
-AC_CONFIG_SUBDIRS(sys)
-
CRT0=
if test "x${have_crt0}" = "xyes"; then
CRT0=crt0.o
@@ -167,12 +165,47 @@ dnl do. However, we do need to know whether they will produce a library.
LIBC_SYS_LIB=
if test -n "${sys_dir}"; then
+ case ${sys_dir} in
+ a29khif) AC_CONFIG_SUBDIRS(sys/a29khif) ;;
+ amdgcn) AC_CONFIG_SUBDIRS(sys/amdgcn) ;;
+ arm) AC_CONFIG_SUBDIRS(sys/arm) ;;
+ d10v) AC_CONFIG_SUBDIRS(sys/d10v) ;;
+ decstation) AC_CONFIG_SUBDIRS(sys/decstation) ;;
+ epiphany) AC_CONFIG_SUBDIRS(sys/epiphany) ;;
+ h8300hms) AC_CONFIG_SUBDIRS(sys/h8300hms) ;;
+ h8500hms) AC_CONFIG_SUBDIRS(sys/h8500hms) ;;
+ linux) AC_CONFIG_SUBDIRS(sys/linux) ;;
+ m88kbug) AC_CONFIG_SUBDIRS(sys/m88kbug) ;;
+ mmixware) AC_CONFIG_SUBDIRS(sys/mmixware) ;;
+ netware) AC_CONFIG_SUBDIRS(sys/netware) ;;
+ or1k) AC_CONFIG_SUBDIRS(sys/or1k) ;;
+ phoenix) AC_CONFIG_SUBDIRS(sys/phoenix) ;;
+ rdos) AC_CONFIG_SUBDIRS(sys/rdos) ;;
+ rtems) AC_CONFIG_SUBDIRS(sys/rtems) ;;
+ sh) AC_CONFIG_SUBDIRS(sys/sh) ;;
+ sparc64) AC_CONFIG_SUBDIRS(sys/sparc64) ;;
+ sun4) AC_CONFIG_SUBDIRS(sys/sun4) ;;
+ sysmec) AC_CONFIG_SUBDIRS(sys/sysmec) ;;
+ sysnec810) AC_CONFIG_SUBDIRS(sys/sysnec810) ;;
+ sysnecv850) AC_CONFIG_SUBDIRS(sys/sysnecv850) ;;
+ sysvi386) AC_CONFIG_SUBDIRS(sys/sysvi386) ;;
+ sysvnecv70) AC_CONFIG_SUBDIRS(sys/sysvnecv70) ;;
+ tic80) AC_CONFIG_SUBDIRS(sys/tic80) ;;
+ tirtos) AC_CONFIG_SUBDIRS(sys/tirtos) ;;
+ w65) AC_CONFIG_SUBDIRS(sys/w65) ;;
+ z8ksim) AC_CONFIG_SUBDIRS(sys/z8ksim) ;;
+ *) AC_MSG_ERROR([unsupported sys_dir "${sys_dir}"]) ;;
+ esac
+
+ SYS_DIR=sys/${sys_dir}
if test "${use_libtool}" = "yes"; then
- LIBC_SYS_LIB=sys/${sys_dir}/lib${sys_dir}.${aext}
+ LIBC_SYS_LIB=${SYS_DIR}/lib${sys_dir}.${aext}
else
- LIBC_SYS_LIB=sys/lib.${aext}
+ LIBC_SYS_LIB=${SYS_DIR}/lib.${aext}
fi
fi
+AC_SUBST(SYS_DIR)
+AM_CONDITIONAL(HAVE_SYS_DIR, test x${sys_dir} != x)
AC_SUBST(LIBC_SYS_LIB)
AC_SUBST(sys_dir)
@@ -260,5 +293,5 @@ AC_SUBST(LIBC_MACHINE_LIB)
AC_SUBST(machine_dir)
AC_SUBST(shared_machine_dir)
-AC_CONFIG_FILES([Makefile argz/Makefile ctype/Makefile errno/Makefile locale/Makefile misc/Makefile reent/Makefile search/Makefile stdio/Makefile stdio64/Makefile stdlib/Makefile string/Makefile time/Makefile posix/Makefile signal/Makefile syscalls/Makefile unix/Makefile iconv/Makefile iconv/ces/Makefile iconv/ccs/Makefile iconv/ccs/binary/Makefile iconv/lib/Makefile ssp/Makefile xdr/Makefile])
+AC_CONFIG_FILES([Makefile argz/Makefile ctype/Makefile errno/Makefile locale/Makefile misc/Makefile reent/Makefile search/Makefile stdio/Makefile stdio64/Makefile stdlib/Makefile string/Makefile time/Makefile posix/Makefile signal/Makefile syscalls/Makefile unix/Makefile iconv/Makefile iconv/ces/Makefile iconv/ccs/Makefile iconv/ccs/binary/Makefile iconv/lib/Makefile ssp/Makefile sys/Makefile xdr/Makefile])
AC_OUTPUT
diff --git a/newlib/libc/ctype/Makefile.in b/newlib/libc/ctype/Makefile.in
index 67da53c2f..17b990290 100644
--- a/newlib/libc/ctype/Makefile.in
+++ b/newlib/libc/ctype/Makefile.in
@@ -358,6 +358,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/errno/Makefile.in b/newlib/libc/errno/Makefile.in
index a718aefc3..3eced35c8 100644
--- a/newlib/libc/errno/Makefile.in
+++ b/newlib/libc/errno/Makefile.in
@@ -273,6 +273,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/iconv/Makefile.in b/newlib/libc/iconv/Makefile.in
index 61d61583d..4e3ecc37e 100644
--- a/newlib/libc/iconv/Makefile.in
+++ b/newlib/libc/iconv/Makefile.in
@@ -272,6 +272,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/iconv/ccs/Makefile.in b/newlib/libc/iconv/ccs/Makefile.in
index ecc81f7b1..d3fe59e74 100644
--- a/newlib/libc/iconv/ccs/Makefile.in
+++ b/newlib/libc/iconv/ccs/Makefile.in
@@ -339,6 +339,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/iconv/ccs/binary/Makefile.in b/newlib/libc/iconv/ccs/binary/Makefile.in
index 67d441c7a..bba8db243 100644
--- a/newlib/libc/iconv/ccs/binary/Makefile.in
+++ b/newlib/libc/iconv/ccs/binary/Makefile.in
@@ -238,6 +238,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/iconv/ces/Makefile.in b/newlib/libc/iconv/ces/Makefile.in
index a40fae336..86ddf2095 100644
--- a/newlib/libc/iconv/ces/Makefile.in
+++ b/newlib/libc/iconv/ces/Makefile.in
@@ -278,6 +278,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/iconv/lib/Makefile.in b/newlib/libc/iconv/lib/Makefile.in
index 550dae6dc..b4517608d 100644
--- a/newlib/libc/iconv/lib/Makefile.in
+++ b/newlib/libc/iconv/lib/Makefile.in
@@ -271,6 +271,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/locale/Makefile.in b/newlib/libc/locale/Makefile.in
index b10952365..cdf35671d 100644
--- a/newlib/libc/locale/Makefile.in
+++ b/newlib/libc/locale/Makefile.in
@@ -289,6 +289,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/misc/Makefile.in b/newlib/libc/misc/Makefile.in
index 97e3fa693..cbb478214 100644
--- a/newlib/libc/misc/Makefile.in
+++ b/newlib/libc/misc/Makefile.in
@@ -282,6 +282,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/posix/Makefile.in b/newlib/libc/posix/Makefile.in
index 125793abf..c109a9c30 100644
--- a/newlib/libc/posix/Makefile.in
+++ b/newlib/libc/posix/Makefile.in
@@ -312,6 +312,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/reent/Makefile.in b/newlib/libc/reent/Makefile.in
index 5b5a48973..d1c3069cf 100644
--- a/newlib/libc/reent/Makefile.in
+++ b/newlib/libc/reent/Makefile.in
@@ -308,6 +308,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/search/Makefile.in b/newlib/libc/search/Makefile.in
index b3078aba1..86f48cec2 100644
--- a/newlib/libc/search/Makefile.in
+++ b/newlib/libc/search/Makefile.in
@@ -297,6 +297,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/signal/Makefile.in b/newlib/libc/signal/Makefile.in
index f4136487e..6966d38ba 100644
--- a/newlib/libc/signal/Makefile.in
+++ b/newlib/libc/signal/Makefile.in
@@ -274,6 +274,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/ssp/Makefile.in b/newlib/libc/ssp/Makefile.in
index 9c4b86493..611984015 100644
--- a/newlib/libc/ssp/Makefile.in
+++ b/newlib/libc/ssp/Makefile.in
@@ -297,6 +297,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/stdio/Makefile.in b/newlib/libc/stdio/Makefile.in
index a2d9891f7..8b6d22d72 100644
--- a/newlib/libc/stdio/Makefile.in
+++ b/newlib/libc/stdio/Makefile.in
@@ -464,6 +464,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/stdio64/Makefile.in b/newlib/libc/stdio64/Makefile.in
index 73bdaf5a9..81bb5e2fa 100644
--- a/newlib/libc/stdio64/Makefile.in
+++ b/newlib/libc/stdio64/Makefile.in
@@ -288,6 +288,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/stdlib/Makefile.in b/newlib/libc/stdlib/Makefile.in
index 570c6950b..74e9eedfc 100644
--- a/newlib/libc/stdlib/Makefile.in
+++ b/newlib/libc/stdlib/Makefile.in
@@ -391,6 +391,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/string/Makefile.in b/newlib/libc/string/Makefile.in
index 2ecd9024d..632aa01fe 100644
--- a/newlib/libc/string/Makefile.in
+++ b/newlib/libc/string/Makefile.in
@@ -375,6 +375,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
diff --git a/newlib/libc/sys/Makefile.am b/newlib/libc/sys/Makefile.am
index a8e65ec80..eb1b4a7da 100644
--- a/newlib/libc/sys/Makefile.am
+++ b/newlib/libc/sys/Makefile.am
@@ -1,25 +1,7 @@
## Process this file with automake to generate Makefile.in
-SUBDIRS = $(sys_dir) .
-
-if HAVE_SYS_DIR
-SYSLIB = lib.a
-endif
-
noinst_DATA = $(CRT0)
-if USE_LIBTOOL
-else
-noinst_LIBRARIES = $(SYSLIB)
-
-lib.a: $(sys_dir)/lib.a
- rm -f $@
- ln $(sys_dir)/lib.a $@ >/dev/null 2>/dev/null \
- || cp $(sys_dir)/lib.a $@
-endif # USE_LIBTOOL
-
-$(sys_dir)/libsys.$(aext): ; @true
-
$(CRT0): $(sys_dir)/$(CRT0)
rm -f $@
ln $(sys_dir)/$(CRT0) $@ >/dev/null 2>/dev/null \
@@ -32,6 +14,3 @@ CLEANFILES = $(CRT0)
doc:
docbook:
-
-ACLOCAL_AMFLAGS = -I ../.. -I ../../.. -I ../../../config
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/sys/Makefile.in b/newlib/libc/sys/Makefile.in
index c20174942..b0f5e0038 100644
--- a/newlib/libc/sys/Makefile.in
+++ b/newlib/libc/sys/Makefile.in
@@ -14,7 +14,6 @@
@SET_MAKE@
-
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
@@ -89,36 +88,23 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-subdir = .
+subdir = sys
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../../../config/depstand.m4 \
- $(top_srcdir)/../../../config/lead-dot.m4 \
- $(top_srcdir)/../../../config/override.m4 \
- $(top_srcdir)/../../../libtool.m4 \
- $(top_srcdir)/../../../ltoptions.m4 \
- $(top_srcdir)/../../../ltsugar.m4 \
- $(top_srcdir)/../../../ltversion.m4 \
- $(top_srcdir)/../../../lt~obsolete.m4 \
- $(top_srcdir)/../../acinclude.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/../../config/depstand.m4 \
+ $(top_srcdir)/../../config/lead-dot.m4 \
+ $(top_srcdir)/../../config/override.m4 \
+ $(top_srcdir)/../../libtool.m4 \
+ $(top_srcdir)/../../ltoptions.m4 \
+ $(top_srcdir)/../../ltsugar.m4 \
+ $(top_srcdir)/../../ltversion.m4 \
+ $(top_srcdir)/../../lt~obsolete.m4 \
+ $(top_srcdir)/../acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
- $(am__configure_deps)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs
+DIST_COMMON = $(srcdir)/Makefile.am
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-ARFLAGS = cru
-AM_V_AR = $(am__v_AR_@AM_V@)
-am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
-am__v_AR_0 = @echo " AR " $@;
-am__v_AR_1 =
-lib_a_AR = $(AR) $(ARFLAGS)
-lib_a_LIBADD =
-lib_a_SOURCES = lib.c
-lib_a_OBJECTS = lib.$(OBJEXT)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
@@ -131,75 +117,16 @@ AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
-DEFAULT_INCLUDES = -I.@am__isrc@
depcomp =
am__depfiles_maybe =
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 =
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo " CC " $@;
-am__v_CC_1 =
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo " CCLD " $@;
-am__v_CCLD_1 =
-SOURCES = lib.c
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
+SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
DATA = $(noinst_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- cscope
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
@@ -237,6 +164,21 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
+LIBC_MACHINE_DIR = @LIBC_MACHINE_DIR@
+LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
+LIBC_POSIX_DEF = @LIBC_POSIX_DEF@
+LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
+LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
+LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
+LIBC_STDIO64_DEF = @LIBC_STDIO64_DEF@
+LIBC_STDIO64_LIB = @LIBC_STDIO64_LIB@
+LIBC_STDIO_DEF = @LIBC_STDIO_DEF@
+LIBC_STDIO_LIB = @LIBC_STDIO_LIB@
+LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
+LIBC_SYS_LIB = @LIBC_SYS_LIB@
+LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
+LIBC_XDR_DEF = @LIBC_XDR_DEF@
+LIBC_XDR_LIB = @LIBC_XDR_LIB@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
@@ -268,6 +210,7 @@ SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
+SYS_DIR = @SYS_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
@@ -329,202 +272,65 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-SUBDIRS = $(sys_dir) .
-@HAVE_SYS_DIR_TRUE@SYSLIB = lib.a
noinst_DATA = $(CRT0)
-@USE_LIBTOOL_FALSE@noinst_LIBRARIES = $(SYSLIB)
CLEANFILES = $(CRT0)
-ACLOCAL_AMFLAGS = -I ../.. -I ../../.. -I ../../../config
-CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-all: all-recursive
+all: all-am
.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh: Makefile
- @:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign --ignore-deps \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps sys/Makefile'; \
$(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign --ignore-deps Makefile
+ $(AUTOMAKE) --foreign --ignore-deps sys/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-@USE_LIBTOOL_TRUE@lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) $(EXTRA_lib_a_DEPENDENCIES)
-@USE_LIBTOOL_TRUE@ $(AM_V_at)-rm -f lib.a
-@USE_LIBTOOL_TRUE@ $(AM_V_AR)$(lib_a_AR) lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-@USE_LIBTOOL_TRUE@ $(AM_V_at)$(RANLIB) lib.a
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-.c.o:
- $(AM_V_CC)$(COMPILE) -c -o $@ $<
-
-.c.obj:
- $(AM_V_CC)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
- $(AM_V_CC)$(LTCOMPILE) -c -o $@ $<
-
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
-distclean-libtool:
- -rm -f libtool config.lt
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
- fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
- test ! -s cscope.files \
- || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
- -rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
- -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
check-am: all-am
-check: check-recursive
-all-am: Makefile $(LIBRARIES) $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-installcheck: installcheck-recursive
+installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
@@ -547,105 +353,89 @@ distclean-generic:
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
+clean: clean-am
-clean-am: clean-generic clean-libtool clean-noinstLIBRARIES \
- mostlyclean-am
+clean-am: clean-generic clean-libtool mostlyclean-am
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+distclean: distclean-am
-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
+distclean-am: clean-am distclean-generic
-dvi: dvi-recursive
+dvi: dvi-am
dvi-am:
-html: html-recursive
+html: html-am
html-am:
-info: info-recursive
+info: info-am
info-am:
install-data-am:
-install-dvi: install-dvi-recursive
+install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
-install-html: install-html-recursive
+install-html: install-html-am
install-html-am:
-install-info: install-info-recursive
+install-info: install-info-am
install-info-am:
install-man:
-install-pdf: install-pdf-recursive
+install-pdf: install-pdf-am
install-pdf-am:
-install-ps: install-ps-recursive
+install-ps: install-ps-am
install-ps-am:
installcheck-am:
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
+maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
-mostlyclean: mostlyclean-recursive
+mostlyclean: mostlyclean-am
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-pdf: pdf-recursive
+pdf: pdf-am
pdf-am:
-ps: ps-recursive
+ps: ps-am
ps-am:
uninstall-am:
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
- am--refresh check check-am clean clean-cscope clean-generic \
- clean-libtool clean-noinstLIBRARIES cscope cscopelist-am ctags \
- ctags-am distclean distclean-compile distclean-generic \
- distclean-libtool distclean-tags dvi dvi-am html html-am info \
- info-am install install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ cscopelist-am ctags-am distclean distclean-generic \
+ distclean-libtool dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-am uninstall uninstall-am
+ tags-am uninstall uninstall-am
.PRECIOUS: Makefile
-@USE_LIBTOOL_FALSE@lib.a: $(sys_dir)/lib.a
-@USE_LIBTOOL_FALSE@ rm -f $@
-@USE_LIBTOOL_FALSE@ ln $(sys_dir)/lib.a $@ >/dev/null 2>/dev/null \
-@USE_LIBTOOL_FALSE@ || cp $(sys_dir)/lib.a $@
-
-$(sys_dir)/libsys.$(aext): ; @true
-
$(CRT0): $(sys_dir)/$(CRT0)
rm -f $@
ln $(sys_dir)/$(CRT0) $@ >/dev/null 2>/dev/null \
diff --git a/newlib/libc/sys/aclocal.m4 b/newlib/libc/sys/aclocal.m4
deleted file mode 100644
index ca346e0df..000000000
--- a/newlib/libc/sys/aclocal.m4
+++ /dev/null
@@ -1,1178 +0,0 @@
-# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
-
-# Copyright (C) 1996-2017 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-# Copyright (C) 2002-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.15'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.15.1], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.15.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-# Expand $ac_aux_dir to an absolute path.
-am_aux_dir=`cd "$ac_aux_dir" && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
- [$1], [CXX], [depcc="$CXX" am_compiler_list=],
- [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
- [$1], [UPC], [depcc="$UPC" am_compiler_list=],
- [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
- [--enable-dependency-tracking],
- [do not reject slow dependency extractors])
-AS_HELP_STRING(
- [--disable-dependency-tracking],
- [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Older Autoconf quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
-m4_define([AC_PROG_CC],
-m4_defn([AC_PROG_CC])
-[_AM_PROG_CC_C_O
-])
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.65])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
- [$0: two- and three-arguments forms are deprecated.])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
- m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
- [ok:ok],,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility. To be removed once Automake 1.9.x
-# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target (and possibly the TAP driver). The
-# system "awk" is bad on some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES([CC])],
- [m4_define([AC_PROG_CC],
- m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES([CXX])],
- [m4_define([AC_PROG_CXX],
- m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES([OBJC])],
- [m4_define([AC_PROG_OBJC],
- m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
- [_AM_DEPENDENCIES([OBJCXX])],
- [m4_define([AC_PROG_OBJCXX],
- m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
-])
-AC_REQUIRE([AM_SILENT_RULES])dnl
-dnl The testsuite driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
-dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-
-# POSIX will say in a future version that running "rm -f" with no argument
-# is OK; and we want to be able to make that assumption in our Makefile
-# recipes. So use an aggressive probe to check that the usage we want is
-# actually supported "in the wild" to an acceptable degree.
-# See automake bug#10828.
-# To make any issue more visible, cause the running configure to be aborted
-# by default if the 'rm' program in use doesn't match our expectations; the
-# user can still override this though.
-if rm -f && rm -fr && rm -rf; then : OK; else
- cat >&2 <<'END'
-Oops!
-
-Your 'rm' program seems unable to run without file operands specified
-on the command line, even when the '-f' option is present. This is contrary
-to the behaviour of most rm programs out there, and not conforming with
-the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
-
-Please tell bug-automake@gnu.org about your system, including the value
-of your $PATH and any error possibly output before this message. This
-can help us improve future automake versions.
-
-END
- if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
- echo 'Configuration will proceed anyway, since you have set the' >&2
- echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
- echo >&2
- else
- cat >&2 <<'END'
-Aborting the configuration process, to ensure you take notice of the issue.
-
-You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <http://www.gnu.org/software/coreutils/>.
-
-If you want to complete the configuration process using your problematic
-'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
-to "yes", and re-run configure.
-
-END
- AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
- fi
-fi
-dnl The trailing newline in this macro's definition is deliberate, for
-dnl backward compatibility and to allow trailing 'dnl'-style comments
-dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST([install_sh])])
-
-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless 'enable' is passed literally.
-# For symmetry, 'disable' may be passed as well. Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
- [enable], [m4_define([am_maintainer_other], [disable])],
- [disable], [m4_define([am_maintainer_other], [enable])],
- [m4_define([am_maintainer_other], [enable])
- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode's default is 'disable' unless 'enable' is passed
- AC_ARG_ENABLE([maintainer-mode],
- [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
- am_maintainer_other[ make rules and dependencies not useful
- (and sometimes confusing) to the casual installer])],
- [USE_MAINTAINER_MODE=$enableval],
- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST([MAINT])dnl
-]
-)
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it is modern enough.
-# If it is, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
- am_missing_run="$MISSING "
-else
- am_missing_run=
- AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Copyright (C) 1999-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_CC_C_O
-# ---------------
-# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
-# to automatically call this.
-AC_DEFUN([_AM_PROG_CC_C_O],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
-AC_LANG_PUSH([C])dnl
-AC_CACHE_CHECK(
- [whether $CC understands -c and -o together],
- [am_cv_prog_cc_c_o],
- [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
- # Make sure it works both with $CC and with simple cc.
- # Following AC_PROG_CC_C_O, we do the test twice because some
- # compilers refuse to overwrite an existing .o file with -o,
- # though they will create one.
- am_cv_prog_cc_c_o=yes
- for am_i in 1 2; do
- if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
- && test -f conftest2.$ac_objext; then
- : OK
- else
- am_cv_prog_cc_c_o=no
- break
- fi
- done
- rm -f core conftest*
- unset am_i])
-if test "$am_cv_prog_cc_c_o" != yes; then
- # Losing compiler, so override with the script.
- # FIXME: It is wrong to rewrite CC.
- # But if we don't then we get into trouble of one sort or another.
- # A longer-term fix would be to have automake use am__CC in this case,
- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
- CC="$am_aux_dir/compile $CC"
-fi
-AC_LANG_POP([C])])
-
-# For backward compatibility.
-AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
-
-# Copyright (C) 2001-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_RUN_LOG(COMMAND)
-# -------------------
-# Run COMMAND, save the exit status in ac_status, and log it.
-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
-AC_DEFUN([AM_RUN_LOG],
-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
- ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- (exit $ac_status); }])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- am_has_slept=no
- for am_try in 1 2; do
- echo "timestamp, slept: $am_has_slept" > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
- alias in your environment])
- fi
- if test "$[2]" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- am_has_slept=yes
- done
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
- ( sleep 1 ) &
- am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
- [AC_MSG_CHECKING([that generated files are newer than configure])
- if test -n "$am_sleep_pid"; then
- # Hide warnings about reused PIDs.
- wait $am_sleep_pid 2>/dev/null
- fi
- AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2009-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# ("yes" being less verbose, "no" or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules], [dnl
-AS_HELP_STRING(
- [--enable-silent-rules],
- [less verbose build output (undo: "make V=1")])
-AS_HELP_STRING(
- [--disable-silent-rules],
- [verbose build output (undo: "make V=0")])dnl
-])
-case $enable_silent_rules in @%:@ (((
- yes) AM_DEFAULT_VERBOSITY=0;;
- no) AM_DEFAULT_VERBOSITY=1;;
- *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-dnl
-dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
-dnl do not support nested variable expansions.
-dnl See automake bug#9928 and bug#10237.
-am_make=${MAKE-make}
-AC_CACHE_CHECK([whether $am_make supports nested variables],
- [am_cv_make_support_nested_variables],
- [if AS_ECHO([['TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
- @$(TRUE)
-.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
- am_cv_make_support_nested_variables=yes
-else
- am_cv_make_support_nested_variables=no
-fi])
-if test $am_cv_make_support_nested_variables = yes; then
- dnl Using '$V' instead of '$(V)' breaks IRIX make.
- AM_V='$(V)'
- AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
- AM_V=$AM_DEFAULT_VERBOSITY
- AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AC_SUBST([AM_V])dnl
-AM_SUBST_NOTMAKE([AM_V])dnl
-AC_SUBST([AM_DEFAULT_V])dnl
-AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip". However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-#
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-
- [m4_case([$1],
- [ustar],
- [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
- # There is notably a 21 bits limit for the UID and the GID. In fact,
- # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
- # and bug#13588).
- am_max_uid=2097151 # 2^21 - 1
- am_max_gid=$am_max_uid
- # The $UID and $GID variables are not portable, so we need to resort
- # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
- # below are definitely unexpected, so allow the users to see them
- # (that is, avoid stderr redirection).
- am_uid=`id -u || echo unknown`
- am_gid=`id -g || echo unknown`
- AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
- if test $am_uid -le $am_max_uid; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- _am_tools=none
- fi
- AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
- if test $am_gid -le $am_max_gid; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- _am_tools=none
- fi],
-
- [pax],
- [],
-
- [m4_fatal([Unknown tar format])])
-
- AC_MSG_CHECKING([how to create a $1 tar archive])
-
- # Go ahead even if we have the value already cached. We do so because we
- # need to set the values for the 'am__tar' and 'am__untar' variables.
- _am_tools=${am_cv_prog_tar_$1-$_am_tools}
-
- for _am_tool in $_am_tools; do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar; do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works.
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- AM_RUN_LOG([cat conftest.dir/file])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
- done
- rm -rf conftest.dir
-
- AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
- AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([../../../config/depstand.m4])
-m4_include([../../../config/lead-dot.m4])
-m4_include([../../../config/override.m4])
-m4_include([../../../libtool.m4])
-m4_include([../../../ltoptions.m4])
-m4_include([../../../ltsugar.m4])
-m4_include([../../../ltversion.m4])
-m4_include([../../../lt~obsolete.m4])
-m4_include([../../acinclude.m4])
diff --git a/newlib/libc/sys/configure b/newlib/libc/sys/configure
deleted file mode 100755
index c562b6d40..000000000
--- a/newlib/libc/sys/configure
+++ /dev/null
@@ -1,14428 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for newlib 4.2.0.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
- # into an infinite loop, continuously re-executing ourselves.
- if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
- _as_can_reexec=no; export _as_can_reexec;
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
- fi
- # We don't want this to propagate to other subprocesses.
- { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1
-
- test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
- ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
- ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
- ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
- PATH=/empty FPATH=/empty; export PATH FPATH
- test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
- || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- export CONFIG_SHELL
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
- # already done that, so ensure we don't try to do so again and fall
- # in an infinite loop. This has already happened in practice.
- _as_can_reexec=no; export _as_can_reexec
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rm[...]
[diff truncated at 100000 bytes]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-01-26 9:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-26 9:11 [newlib-cygwin] newlib: libc: merge sys/ trampoline up a level Michael Frysinger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).