From: Alexandre Oliva <oliva@adacore.com>
To: Richard Biener <rguenther@suse.de>
Cc: gcc-patches@gcc.gnu.org, ebotcazou@adacore.com, joseph@codesourcery.com
Cc: Andreas Schwab <schwab@suse.de>, Hans-Peter Nilsson <hp@axis.com>,
David Edelsohn <dje.gcc@gmail.com>, Jeff Law <law@redhat.com>,
Christophe Lyon <christophe.lyon@linaro.org>
Subject: Re: drop -aux{dir,base}, revamp -dump{dir,base}
Date: Wed, 27 May 2020 19:05:20 -0300 [thread overview]
Message-ID: <or4ks16nkv.fsf@livre.home> (raw)
In-Reply-To: <nycvar.YFH.7.76.2005261556330.4397@zhemvz.fhfr.qr> (Richard Biener's message of "Tue, 26 May 2020 15:56:40 +0200 (CEST)")
outputs.exp: no lto, linker default output, cdtor temps, empty args
From: Alexandre Oliva <oliva@adacore.com>
This patch fixes various issues in the testsuite that came up after
the dump/aux output revamp, namely:
- many outputs.exp tests used -flto without checking that LTO was
supported, getting lots of failures. With this patch, we test for LTO
support, and skip -flto tests on platforms that do not support it.
- some linkers error out if an output file is not named, and the
a.{out,exe} construct that we used throughout outputs.exp to match the
default linker output would trigger a bug in tcl globbing. With this
patch, we detect the default linker output early. If none is found,
we arrange to pass -o a.out explicitly in tests that used to test the
default linker output. We now look for the detected default, or for
explicitly-specified output.
- collect2 will leave <execname>.cdtor.* files behind in -save-temps
tests. Ignore them.
- The prepending of -Wl, to file names in ldflags et al was done in a
way that introduced empty arguments when consecutive blanks appeared
in these board configuration knobs. Skip the empty strings between
consecutive blanks to avoid this problem.
Tested so far on x86_64-linux-gnu and powerpc-aix7. Ok to install?
gcc/testsuite/ChangeLog:
* lib/gcc-defs.exp: Avoid introducing empty arguments between
consecutive blanks in board linking options.
* gcc.misc-tests/outputs.exp: Likewise. Document
-gsplit-dwarf testing, skip LTO tests if -flto is not
supported, detect the default linker output name, cope with
the need for an explicit executable output.
---
gcc/testsuite/gcc.misc-tests/outputs.exp | 163 +++++++++++++++++++++---------
gcc/testsuite/lib/gcc-defs.exp | 4 +
2 files changed, 119 insertions(+), 48 deletions(-)
diff --git a/gcc/testsuite/gcc.misc-tests/outputs.exp b/gcc/testsuite/gcc.misc-tests/outputs.exp
index 9823710..c3c6c2d 100644
--- a/gcc/testsuite/gcc.misc-tests/outputs.exp
+++ b/gcc/testsuite/gcc.misc-tests/outputs.exp
@@ -30,6 +30,9 @@ if {![gcc_parallel_test_run_p $b] || [is_remote host]} {
}
gcc_parallel_test_enable 0
+# Check for -gsplit-dwarf support. The outest proc will check that
+# gsplit_dwarf is empty if a .dwo file is missing before deciding
+# that's a fail.
set gsplit_dwarf "-gsplit-dwarf"
if ![check_no_compiler_messages gsplitdwarf object {
void foo (void) { }
@@ -37,6 +40,10 @@ if ![check_no_compiler_messages gsplitdwarf object {
set gsplit_dwarf ""
}
+# Check for -flto support. We explicitly test the result to skip
+# tests that use -flto.
+set skip_lto ![check_effective_target_lto]
+
# Prepare additional options to be used for linking.
# We do not compile to an executable, because that requires naming an output.
set link_options ""
@@ -45,7 +52,9 @@ foreach i { ldflags libs ldscripts } {
if {[board_info $dest exists $i]} {
set skip ""
foreach opt [split [board_info $dest $i]] {
- if { $skip != "" } then {
+ if { $opt == "" } then {
+ continue
+ } elseif { $skip != "" } then {
set skip ""
} elseif { $opt == "-Xlinker" } then {
set skip $opt
@@ -73,9 +82,10 @@ if {[board_info $dest exists output_format]} {
# double dash, or a dash followed by a period, the first dash is
# replaced with $b-$b; names starting with "a--" or "a-." have "$b"
# inserted after the first dash. The glob pattern may expand to more
-# than one file, but then the test will pass when there any number of
-# matches. So, it's safe to use for a.{out,exe}, but .{i,s,o} and
-# .[iso] will pass even if only the .o is present.
+# than one file, but then the test will pass for any number of
+# matches, i.e., it would be safe to use for a.{out,exe} (if it
+# weren't for https://core.tcl-lang.org/tcl/tktview?name=5bbd044812),
+# but .{i,s,o} and .[iso] will pass even if only the .o is present.
proc outest { test sources opts dirs outputs } {
global b
global srcdir
@@ -120,6 +130,9 @@ proc outest { test sources opts dirs outputs } {
set o "a-$b-[string range $og 3 end]"
} elseif { [string range $og 0 2] == "a-." } then {
set o "a-$b.[string range $og 3 end]"
+ } elseif { "$og" == "\$aout" } then {
+ global aout
+ set o "$aout"
} else {
set o "$og"
}
@@ -148,17 +161,23 @@ proc outest { test sources opts dirs outputs } {
}
}
+ set outb {}
foreach f $outs {
file delete $f
+ # collect2 may create <execname>.cdtor* files in -save-temps link tests,
+ # ??? without regard to aux output naming conventions.
+ if ![string match "*.cdtor.*" $f] then {
+ lappend outb $f
+ }
}
foreach d $dirs {
file delete -force $d
}
- if { [llength $outs] == 0 } then {
+ if { [llength $outb] == 0 } then {
pass "$test: extra"
} else {
- fail "$test: extra\n$outs"
+ fail "$test: extra\n$outb"
}
if { [string equal "$gcc_output" ""] } then {
@@ -172,6 +191,50 @@ proc outest { test sources opts dirs outputs } {
set sing {-0.c}
set mult {-1.c -2.c}
+# Find out the default linker output. We only check for a.out and
+# e.exe; gcc.c, the lto-wrapper and whatnot may have to change if
+# prefixes other than a. might be used. Our tests may have to be
+# adjusted then. Also, there may not be a default. Some linkers
+# error out if -o is not specified.
+proc default_link_name { sources } {
+ global b
+ global srcdir
+ global subdir
+ set src {}
+ foreach s $sources {
+ lappend src $srcdir/$subdir/$b$s
+ }
+
+ set maybe { a.out a.exe }
+ foreach f $maybe {
+ file delete $f
+ }
+
+ global link_options
+ set gcc_output [gcc_target_compile $src "" none "$link_options"]
+
+ foreach f $maybe {
+ if { [file exists $f] } then {
+ file delete $f
+ return $f
+ }
+ }
+
+ return "";
+}
+
+set aout [default_link_name $sing]
+
+# If there is no default linker output, arrange for -o a.out to be
+# specified where we would normally leave it for the linker to use its
+# default.
+if { "$aout" != "" } then {
+ set oaout ""
+} else {
+ set aout a.out
+ set oaout "-o $aout"
+}
+
# Driver-chosen outputs.
outest "$b asm default 1" $sing "-S" {} {{-0.s}}
outest "$b asm default 2" $mult "-S" {} {{-1.s -2.s}}
@@ -179,8 +242,8 @@ outest "$b asm default 2" $mult "-S" {} {{-1.s -2.s}}
outest "$b obj default 1" $sing "-c" {} {{-0.o}}
outest "$b obj default 2" $mult "-c" {} {{-1.o -2.o}}
-outest "$b exe default 1" $sing "" {} {{a.{out,exe}}}
-outest "$b exe default 2" $mult "" {} {{a.{out,exe}}}
+outest "$b exe default 1" $sing "$oaout" {} {{$aout}}
+outest "$b exe default 2" $mult "$oaout" {} {{$aout}}
# Driver-chosen aux outputs.
outest "$b asm savetmp 1" $sing "-S -save-temps" {} {{-0.i -0.s}}
@@ -200,8 +263,8 @@ outest "$b obj savetmp namedb" $sing "-c -o $b.o -save-temps" {} {{.i .s .o}}
# When linking, the executable name gets prepended to aux output
# basenames, except when executable and single input share the same
# basename.
-outest "$b exe savetmp unnamed1" $sing "-save-temps" {} {{a--0.i a--0.s a--0.o a.{out,exe}}}
-outest "$b exe savetmp unnamed2" $mult "-save-temps" {} {{a--1.i a--1.s a--1.o a--2.i a--2.s a--2.o a.{out,exe}}}
+outest "$b exe savetmp unnamed1" $sing "-save-temps $oaout" {} {{a--0.i a--0.s a--0.o $aout}}
+outest "$b exe savetmp unnamed2" $mult "-save-temps $oaout" {} {{a--1.i a--1.s a--1.o a--2.i a--2.s a--2.o $aout}}
outest "$b exe savetmp named0" $sing "-o $b-0.exe -save-temps" {} {{-0.i -0.s -0.o -0.exe}}
outest "$b exe savetmp namedb" $sing "-o $b.exe -save-temps" {} {{--0.i --0.s --0.o .exe}}
outest "$b exe savetmp named2" $mult "-o $b.exe -save-temps" {} {{--1.i --1.s --1.o --2.i --2.s --2.o .exe}}
@@ -227,8 +290,8 @@ outest "$b obj savecwd named0" $sing "-c -o $b-0.o -save-temps=cwd" {} {{-0.i -0
outest "$b cpp savecwd namedb" $sing "-E -o $b.i -save-temps=cwd" {} {{.i}}
outest "$b asm savecwd namedb" $sing "-S -o $b.s -save-temps=cwd" {} {{.i .s}}
outest "$b obj savecwd namedb" $sing "-c -o $b.o -save-temps=cwd" {} {{.i .s .o}}
-outest "$b exe savecwd unnamed1" $sing "-save-temps=cwd" {} {{a--0.i a--0.s a--0.o a.{out,exe}}}
-outest "$b exe savecwd unnamed2" $mult "-save-temps=cwd" {} {{a--1.i a--1.s a--1.o a--2.i a--2.s a--2.o a.{out,exe}}}
+outest "$b exe savecwd unnamed1" $sing "-save-temps=cwd $oaout" {} {{a--0.i a--0.s a--0.o $aout}}
+outest "$b exe savecwd unnamed2" $mult "-save-temps=cwd $oaout" {} {{a--1.i a--1.s a--1.o a--2.i a--2.s a--2.o $aout}}
outest "$b exe savecwd named0" $sing "-o $b-0.exe -save-temps=cwd" {} {{-0.i -0.s -0.o -0.exe}}
outest "$b exe savecwd namedb" $sing "-o $b.exe -save-temps=cwd" {} {{--0.i --0.s --0.o .exe}}
outest "$b exe savecwd named2" $mult "-o $b.exe -save-temps=cwd" {} {{--1.i --1.s --1.o --2.i --2.s --2.o .exe}}
@@ -253,8 +316,8 @@ outest "$b obj saveobj named0" $sing "-c -o $b-0.o -save-temps=obj" {} {{-0.i -0
outest "$b cpp saveobj namedb" $sing "-E -o $b.i -save-temps=obj" {} {{.i}}
outest "$b asm saveobj namedb" $sing "-S -o $b.s -save-temps=obj" {} {{.i .s}}
outest "$b obj saveobj namedb" $sing "-c -o $b.o -save-temps=obj" {} {{.i .s .o}}
-outest "$b exe saveobj unnamed1" $sing "-save-temps=obj" {} {{a--0.i a--0.s a--0.o a.{out,exe}}}
-outest "$b exe saveobj unnamed2" $mult "-save-temps=obj" {} {{a--1.i a--1.s a--1.o a--2.i a--2.s a--2.o a.{out,exe}}}
+outest "$b exe saveobj unnamed1" $sing "-save-temps=obj $oaout" {} {{a--0.i a--0.s a--0.o $aout}}
+outest "$b exe saveobj unnamed2" $mult "-save-temps=obj $oaout" {} {{a--1.i a--1.s a--1.o a--2.i a--2.s a--2.o $aout}}
outest "$b exe saveobj named0" $sing "-o $b-0.exe -save-temps=obj" {} {{-0.i -0.s -0.o -0.exe}}
outest "$b exe saveobj namedb" $sing "-o $b.exe -save-temps=obj" {} {{--0.i --0.s --0.o .exe}}
outest "$b exe saveobj named2" $mult "-o $b.exe -save-temps=obj" {} {{--1.i --1.s --1.o --2.i --2.s --2.o .exe}}
@@ -314,8 +377,8 @@ outest "$b cpp auxdump namedb" $sing "-E -o $b.i -g -fdump-rtl-final -fstack-usa
outest "$b asm auxdump namedb" $sing "-S -o $b.s -g -fdump-rtl-final -fstack-usage $gsplit_dwarf" {} {{.c.???r.final .su .s}}
outest "$b obj auxdump namedb" $sing "-c -o $b.o -g -fdump-rtl-final -fstack-usage $gsplit_dwarf" {} {{.c.???r.final .su .dwo .o}}
-outest "$b exe auxdump unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf" {} {{a--0.c.???r.final a--0.su a--0.dwo a.{out,exe}}}
-outest "$b exe auxdump unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf" {} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo a.{out,exe}}}
+outest "$b exe auxdump unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf $oaout" {} {{a--0.c.???r.final a--0.su a--0.dwo $aout}}
+outest "$b exe auxdump unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf $oaout" {} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo $aout}}
outest "$b exe auxdump named0" $sing "-o $b-0.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf" {} {{-0.c.???r.final -0.su -0.dwo -0.exe}}
outest "$b exe auxdump namedb" $sing "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf" {} {{--0.c.???r.final --0.su --0.dwo .exe}}
outest "$b exe auxdump named2" $mult "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf" {} {{--1.c.???r.final --1.su --1.dwo --2.c.???r.final --2.su --2.dwo .exe}}
@@ -344,8 +407,8 @@ outest "$b cpp auxdmps namedb" $sing "-E -o $b.i -g -fdump-rtl-final -fstack-usa
outest "$b asm auxdmps namedb" $sing "-S -o $b.s -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps" {} {{.i .c.???r.final .su .s}}
outest "$b obj auxdmps namedb" $sing "-c -o $b.o -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps" {} {{.i .c.???r.final .su .s .dwo .o}}
-outest "$b exe auxdmps unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps" {} {{a--0.i a--0.c.???r.final a--0.su a--0.s a--0.dwo a--0.o a.{out,exe}}}
-outest "$b exe auxdmps unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps" {} {{a--1.i a--1.c.???r.final a--1.su a--1.s a--1.dwo a--1.o a--2.i a--2.c.???r.final a--2.su a--2.s a--2.dwo a--2.o a.{out,exe}}}
+outest "$b exe auxdmps unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps $oaout" {} {{a--0.i a--0.c.???r.final a--0.su a--0.s a--0.dwo a--0.o $aout}}
+outest "$b exe auxdmps unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps $oaout" {} {{a--1.i a--1.c.???r.final a--1.su a--1.s a--1.dwo a--1.o a--2.i a--2.c.???r.final a--2.su a--2.s a--2.dwo a--2.o $aout}}
outest "$b exe auxdmps named0" $sing "-o $b-0.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps" {} {{-0.i -0.c.???r.final -0.su -0.s -0.dwo -0.o -0.exe}}
outest "$b exe auxdmps namedb" $sing "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps" {} {{--0.i --0.c.???r.final --0.su --0.s --0.dwo --0.o .exe}}
outest "$b exe auxdmps named2" $mult "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -save-temps" {} {{--1.i --1.c.???r.final --1.su --1.s --1.dwo --1.o --2.i --2.c.???r.final --2.su --2.s --2.dwo --2.o .exe}}
@@ -374,8 +437,8 @@ outest "$b cpp dumpdir namedb" $sing "-E -o $b.i -g -fdump-rtl-final -fstack-usa
outest "$b asm dumpdir namedb" $sing "-S -o $b.s -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/" {od/} {{.c.???r.final .su} {.s}}
outest "$b obj dumpdir namedb" $sing "-c -o $b.o -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/" {od/} {{.c.???r.final .su .dwo} {.o}}
-outest "$b exe dumpdir unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/a-" {od/} {{a--0.c.???r.final a--0.su a--0.dwo} {a.{out,exe}}}
-outest "$b exe dumpdir unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/a-" {od/} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo} {a.{out,exe}}}
+outest "$b exe dumpdir unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/a- $oaout" {od/} {{a--0.c.???r.final a--0.su a--0.dwo} {$aout}}
+outest "$b exe dumpdir unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/a- $oaout" {od/} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo} {$aout}}
outest "$b exe dumpdir named0" $sing "-o $b-0.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/" {od/} {{-0.c.???r.final -0.su -0.dwo} {-0.exe}}
outest "$b exe dumpdir namedb" $sing "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/" {od/} {{-0.c.???r.final -0.su -0.dwo} {.exe}}
outest "$b exe dumpdir named2" $mult "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/" {od/} {{-1.c.???r.final -1.su -1.dwo -2.c.???r.final -2.su -2.dwo} {.exe}}
@@ -428,8 +491,8 @@ outest "$b obj dbsovrdd namedb" $sing "-c -o $b.o -g -fdump-rtl-final -fstack-us
# Nit: -dumpdir affects whether the specified dumpbase is combined
# into dumpdir or taken as the output basename, even if dumpbase will
# ultimately override it.
-outest "$b exe dbsovrdd unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir ./ -dumpbase od/$b" {od/} {{.???r.final .su .dwo} {a.{out,exe}}}
-outest "$b exe dbsovrdd unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir ./ -dumpbase od/a" {od/} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo} {a.{out,exe}}}
+outest "$b exe dbsovrdd unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir ./ -dumpbase od/$b $oaout" {od/} {{.???r.final .su .dwo} {$aout}}
+outest "$b exe dbsovrdd unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir ./ -dumpbase od/a $oaout" {od/} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo} {$aout}}
outest "$b exe dbsovrdd named0" $sing "-o $b-0.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir ./ -dumpbase od/$b" {od/} {{.???r.final .su .dwo} {-0.exe}}
outest "$b exe dbsovrdd namedb" $sing "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir ./ -dumpbase od/$b.exe -dumpbase-ext .exe" {od/} {{.exe.???r.final .su .dwo} {.exe}}
outest "$b exe dbsovrdd named2" $mult "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir ./ -dumpbase od/$b" {od/} {{--1.c.???r.final --1.su --1.dwo --2.c.???r.final --2.su --2.dwo} {.exe}}
@@ -472,8 +535,8 @@ outest "$b obj dbswthdd namedb" $sing "-c -o $b.o -g -fdump-rtl-final -fstack-us
# Nitty details: -dumpdir affects whether the specified dumpbase is
# combined into dumpdir or taken as the output basename, even if
# dumpbase will ultimately override it.
-outest "$b exe dbswthdd unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/ -dumpbase $b" {od/} {{.???r.final .su .dwo} {a.{out,exe}}}
-outest "$b exe dbswthdd unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/ -dumpbase a" {od/} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo} {a.{out,exe}}}
+outest "$b exe dbswthdd unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/ -dumpbase $b $oaout" {od/} {{.???r.final .su .dwo} {$aout}}
+outest "$b exe dbswthdd unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/ -dumpbase a $oaout" {od/} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo} {$aout}}
outest "$b exe dbswthdd named0" $sing "-o $b-0.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/ -dumpbase $b" {od/} {{.???r.final .su .dwo} {-0.exe}}
outest "$b exe dbswthdd namedb" $sing "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/ -dumpbase $b.exe -dumpbase-ext .exe" {od/} {{.exe.???r.final .su .dwo} {.exe}}
outest "$b exe dbswthdd named2" $mult "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpdir od/ -dumpbase $b" {od/} {{--1.c.???r.final --1.su --1.dwo --2.c.???r.final --2.su --2.dwo} {.exe}}
@@ -516,8 +579,8 @@ outest "$b cpp dbwoutdd namedb" $sing "-E -o $b.i -g -fdump-rtl-final -fstack-us
outest "$b asm dbwoutdd namedb" $sing "-S -o $b.s -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase od/$b" {od/} {{.???r.final .su} {.s}}
outest "$b obj dbwoutdd namedb" $sing "-c -o $b.o -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase od/$b" {od/} {{.???r.final .su .dwo} {.o}}
-outest "$b exe dbwoutdd unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase od/$b" {od/} {{--0.c.???r.final --0.su --0.dwo} {a.{out,exe}}}
-outest "$b exe dbwoutdd unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase od/a" {od/} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo} {a.{out,exe}}}
+outest "$b exe dbwoutdd unnamed1" $sing "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase od/$b $oaout" {od/} {{--0.c.???r.final --0.su --0.dwo} {$aout}}
+outest "$b exe dbwoutdd unnamed2" $mult "-g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase od/a $oaout" {od/} {{a--1.c.???r.final a--1.su a--1.dwo a--2.c.???r.final a--2.su a--2.dwo} {$aout}}
outest "$b exe dbwoutdd named0" $sing "-o $b-0.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase od/$b" {od/} {{--0.c.???r.final --0.su --0.dwo} {-0.exe}}
outest "$b exe dbwoutdd named0d" $sing "-o od/$b-0.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase $b" {od/} {{--0.c.???r.final --0.su --0.dwo -0.exe} {}}
outest "$b exe dbwoutdd namedb" $sing "-o $b.exe -g -fdump-rtl-final -fstack-usage $gsplit_dwarf -dumpbase od/$b.exe -dumpbase-ext .exe" {od/} {{--0.c.???r.final --0.su --0.dwo} {.exe}}
@@ -542,9 +605,11 @@ outest "$b exe dbwoutdda namedir2" $mult "-o o/$b.exe -g -fdump-rtl-final -fstac
outest "$b obj compare-debug" $sing "-c -fcompare-debug -fdump-rtl-final -fstack-usage $gsplit_dwarf -fdump-final-insns" {} {{-0.c.???r.final -0.su -0.c.gkd -0.gk.c.???r.final -0.dwo -0.o}}
outest "$b obj compare-debug save-temps" $sing "-c -fcompare-debug -save-temps -fdump-rtl-final -fstack-usage $gsplit_dwarf -fdump-final-insns" {} {{-0.c.???r.final -0.su -0.i -0.c.gkd -0.s -0.gk.i -0.gk.c.???r.final -0.gk.c.gkd -0.dwo -0.o}}
+if !$skip_lto {
+
# -flto
-outest "$b lto sing unnamed" $sing "-O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{a--0.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.{out,exe}}}
-outest "$b lto mult unnamed" $mult "-O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{a--1.c.???i.icf a--2.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.{out,exe}}}
+outest "$b lto sing unnamed" $sing "-O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{a--0.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su $aout}}
+outest "$b lto mult unnamed" $mult "-O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{a--1.c.???i.icf a--2.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su $aout}}
outest "$b lto sing named" $sing "-o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{--0.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .exe}}
outest "$b lto mult named" $mult "-o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .exe}}
outest "$b lto sing nameddir" $sing "-o dir/$b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .exe} {}}
@@ -553,8 +618,8 @@ outest "$b lto mult nameddir" $mult "-o dir/$b.exe -O2 -flto -flto-partition=one
# -dumpbase without -dumpdir. The trailing dumppfx dash after it is
# combined with dumpbase turns into a period when passed to lto as
# -dumpdir, because the dash is introduced by the compiler driver.
-outest "$b lto sing dumpbase unnamed" $sing "-dumpbase dir/$b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {a.{out,exe}}}
-outest "$b lto mult dumpbase unnamed" $mult "-dumpbase dir/$b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {a.{out,exe}}}
+outest "$b lto sing dumpbase unnamed" $sing "-dumpbase dir/$b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{--0.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {$aout}}
+outest "$b lto mult dumpbase unnamed" $mult "-dumpbase dir/$b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {$aout}}
outest "$b lto sing dumpbase named" $sing "-dumpbase dir/$b -o $b-0.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {-0.exe}}
outest "$b lto mult dumpbase named" $mult "-dumpbase dir/$b -o $b-1.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {-1.exe}}
outest "$b lto sing dumpbase namedb" $sing "-dumpbase dir/$b -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {.exe}}
@@ -562,24 +627,24 @@ outest "$b lto mult dumpbase namedb" $mult "-dumpbase dir/$b -o $b.exe -O2 -flto
# -dumpdir without -dumpbase. The trailing dash in -dumpdir is given
# by the user, thus not replaced with a dot.
-outest "$b lto sing dumpdir unnamed" $sing "-dumpdir dir/$b- -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf -wpa.???i.icf -ltrans0.ltrans.???r.final -ltrans0.ltrans.su} {a.{out,exe}}}
-outest "$b lto mult dumpdir unnamed" $mult "-dumpdir dir/$b- -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf -wpa.???i.icf -ltrans0.ltrans.???r.final -ltrans0.ltrans.su} {a.{out,exe}}}
+outest "$b lto sing dumpdir unnamed" $sing "-dumpdir dir/$b- -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{--0.c.???i.icf -wpa.???i.icf -ltrans0.ltrans.???r.final -ltrans0.ltrans.su} {$aout}}
+outest "$b lto mult dumpdir unnamed" $mult "-dumpdir dir/$b- -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{--1.c.???i.icf --2.c.???i.icf -wpa.???i.icf -ltrans0.ltrans.???r.final -ltrans0.ltrans.su} {$aout}}
outest "$b lto sing dumpdir named" $sing "-dumpdir dir/$b- -o $b-0.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf -wpa.???i.icf -ltrans0.ltrans.???r.final -ltrans0.ltrans.su} {-0.exe}}
outest "$b lto mult dumpdir named" $mult "-dumpdir dir/$b- -o $b-1.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf -wpa.???i.icf -ltrans0.ltrans.???r.final -ltrans0.ltrans.su} {-1.exe}}
outest "$b lto sing dumpdir namedb" $sing "-dumpdir dir/$b- -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf -wpa.???i.icf -ltrans0.ltrans.???r.final -ltrans0.ltrans.su} {.exe}}
outest "$b lto mult dumpdir namedb" $mult "-dumpdir dir/$b- -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf -wpa.???i.icf -ltrans0.ltrans.???r.final -ltrans0.ltrans.su} {.exe}}
# -dumpdir and non-overriding -dumpbase.
-outest "$b lto dbswthdd sing unnamed" $sing "-dumpdir dir/ -dumpbase $b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {a.{out,exe}}}
-outest "$b lto dbswthdd mult unnamed" $mult "-dumpdir dir/ -dumpbase $b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {a.{out,exe}}}
+outest "$b lto dbswthdd sing unnamed" $sing "-dumpdir dir/ -dumpbase $b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {$aout}}
+outest "$b lto dbswthdd mult unnamed" $mult "-dumpdir dir/ -dumpbase $b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {$aout}}
outest "$b lto dbswthdd sing named" $sing "-dumpdir dir/ -dumpbase $b -o $b-0.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {-0.exe}}
outest "$b lto dbswthdd mult named" $mult "-dumpdir dir/ -dumpbase $b -o $b-1.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {-1.exe}}
outest "$b lto dbswthdd sing namedb" $sing "-dumpdir dir/ -dumpbase $b -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {.exe}}
outest "$b lto dbswthdd mult namedb" $mult "-dumpdir dir/ -dumpbase $b -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {.exe}}
# -dumpdir and an overriding -dumpbase.
-outest "$b lto dbsovrdd sing unnamed" $sing "-dumpdir ignore/ -dumpbase dir/$b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {a.{out,exe}}}
-outest "$b lto dbsovrdd mult unnamed" $mult "-dumpdir ignore/ -dumpbase dir/$b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {a.{out,exe}}}
+outest "$b lto dbsovrdd sing unnamed" $sing "-dumpdir ignore/ -dumpbase dir/$b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {$aout}}
+outest "$b lto dbsovrdd mult unnamed" $mult "-dumpdir ignore/ -dumpbase dir/$b -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {$aout}}
outest "$b lto dbsovrdd sing named" $sing "-dumpdir ignore/ -dumpbase dir/$b -o $b-0.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {-0.exe}}
outest "$b lto dbsovrdd mult named" $mult "-dumpdir ignore/ -dumpbase dir/$b -o $b-1.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {-1.exe}}
outest "$b lto dbsovrdd sing namedb" $sing "-dumpdir ignore/ -dumpbase dir/$b -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su} {.exe}}
@@ -588,16 +653,16 @@ outest "$b lto dbsovrdd mult namedb" $mult "-dumpdir ignore/ -dumpbase dir/$b -o
# Check that -dumpbase '' gets source names as dumpbases for
# compilation, and output name as dumpbase for linking, regardless of
# how many source files.
-outest "$b lto sing empty dumpbase unnamed" $sing "-dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{-0.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.{out,exe}}}
-outest "$b lto mult empty dumpbase unnamed" $mult "-dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{-1.c.???i.icf -2.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.{out,exe}}}
+outest "$b lto sing empty dumpbase unnamed" $sing "-dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{-0.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su $aout}}
+outest "$b lto mult empty dumpbase unnamed" $mult "-dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{-1.c.???i.icf -2.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su $aout}}
outest "$b lto sing empty dumpbase named" $sing "-dumpbase \"\" -o dir/$b-0.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-0.c.???i.icf -0.wpa.???i.icf -0.ltrans0.ltrans.???r.final -0.ltrans0.ltrans.su -0.exe} {}}
outest "$b lto mult empty dumpbase named" $mult "-dumpbase \"\" -o dir/$b-1.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-1.c.???i.icf -2.c.???i.icf -1.wpa.???i.icf -1.ltrans0.ltrans.???r.final -1.ltrans0.ltrans.su -1.exe} {}}
outest "$b lto sing empty dumpbase namedb" $sing "-dumpbase \"\" -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{-0.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .exe}}
outest "$b lto mult empty dumpbase namedb" $mult "-dumpbase \"\" -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{-1.c.???i.icf -2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .exe}}
# Now with -dumpdir too.
-outest "$b lto sing empty dumpbase dumpdir unnamed" $sing "-dumpdir dir/$b- -dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf -a.wpa.???i.icf -a.ltrans0.ltrans.???r.final -a.ltrans0.ltrans.su} {a.{out,exe}}}
-outest "$b lto mult empty dumpbase dumpdir unnamed" $mult "-dumpdir dir/$b- -dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf -a.wpa.???i.icf -a.ltrans0.ltrans.???r.final -a.ltrans0.ltrans.su} {a.{out,exe}}}
+outest "$b lto sing empty dumpbase dumpdir unnamed" $sing "-dumpdir dir/$b- -dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{--0.c.???i.icf -a.wpa.???i.icf -a.ltrans0.ltrans.???r.final -a.ltrans0.ltrans.su} {$aout}}
+outest "$b lto mult empty dumpbase dumpdir unnamed" $mult "-dumpdir dir/$b- -dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {dir/} {{--1.c.???i.icf --2.c.???i.icf -a.wpa.???i.icf -a.ltrans0.ltrans.???r.final -a.ltrans0.ltrans.su} {$aout}}
outest "$b lto sing empty dumpbase dumpdir named" $sing "-dumpdir dir/$b- -dumpbase \"\" -o $b-0.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf --0.wpa.???i.icf --0.ltrans0.ltrans.???r.final --0.ltrans0.ltrans.su} {-0.exe}}
outest "$b lto mult empty dumpbase dumpdir named" $mult "-dumpdir dir/$b- -dumpbase \"\" -o $b-1.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.c.???i.icf --2.c.???i.icf --1.wpa.???i.icf --1.ltrans0.ltrans.???r.final --1.ltrans0.ltrans.su} {-1.exe}}
outest "$b lto sing empty dumpbase dumpdir namedb" $sing "-dumpdir dir/$b- -dumpbase \"\" -o $b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.c.???i.icf -.wpa.???i.icf -.ltrans0.ltrans.???r.final -.ltrans0.ltrans.su} {.exe}}
@@ -605,29 +670,32 @@ outest "$b lto mult empty dumpbase dumpdir namedb" $mult "-dumpdir dir/$b- -dump
# And also with an empty -dumpdir. That's equivalent to -dumpdir ./,
# overriding any dumpdir implied by the output.
-outest "$b lto sing empty dumpdir empty dumpbase unnamed" $sing "-dumpdir \"\" -dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{-0.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.{out,exe}}}
-outest "$b lto mult empty dumpdir empty dumpbase unnamed" $mult "-dumpdir \"\" -dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{-1.c.???i.icf -2.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.{out,exe}}}
+outest "$b lto sing empty dumpdir empty dumpbase unnamed" $sing "-dumpdir \"\" -dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{-0.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su $aout}}
+outest "$b lto mult empty dumpdir empty dumpbase unnamed" $mult "-dumpdir \"\" -dumpbase \"\" -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{-1.c.???i.icf -2.c.???i.icf a.wpa.???i.icf a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su $aout}}
outest "$b lto sing empty dumpdir empty dumpbase named" $sing "-dumpdir \"\" -dumpbase \"\" -o dir/$b-0.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-0.exe} {-0.c.???i.icf -0.wpa.???i.icf -0.ltrans0.ltrans.???r.final -0.ltrans0.ltrans.su}}
outest "$b lto mult empty dumpdir empty dumpbase named" $mult "-dumpdir \"\" -dumpbase \"\" -o dir/$b-1.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-1.exe} {-1.c.???i.icf -2.c.???i.icf -1.wpa.???i.icf -1.ltrans0.ltrans.???r.final -1.ltrans0.ltrans.su}}
outest "$b lto sing empty dumpdir empty dumpbase namedb" $sing "-dumpdir \"\" -dumpbase \"\" -o dir/$b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{.exe} {-0.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su}}
outest "$b lto mult empty dumpdir empty dumpbase namedb" $mult "-dumpdir \"\" -dumpbase \"\" -o dir/$b.exe -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{.exe} {-1.c.???i.icf -2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su}}
# Now -flto with -save-temps, not exhaustive.
-outest "$b lto st sing empty dumpbase unnamed" $sing "-dumpbase \"\" -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{-0.i -0.s -0.o -0.c.???i.icf a.lto_wrapper_args a.wpa.???i.icf a.ltrans.out a.res a.ltrans0.o a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.ltrans0.ltrans.s a.ltrans0.ltrans.o a.{out,exe}}}
-outest "$b lto st mult empty dumpbase unnamed" $mult "-dumpbase \"\" -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{-1.i -1.s -1.o -1.c.???i.icf -2.i -2.s -2.o -2.c.???i.icf a.lto_wrapper_args a.wpa.???i.icf a.ltrans.out a.res a.ltrans0.o a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.ltrans0.ltrans.s a.ltrans0.ltrans.o a.{out,exe}}}
+outest "$b lto st sing empty dumpbase unnamed" $sing "-dumpbase \"\" -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{-0.i -0.s -0.o -0.c.???i.icf a.lto_wrapper_args a.wpa.???i.icf a.ltrans.out a.res a.ltrans0.o a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.ltrans0.ltrans.s a.ltrans0.ltrans.o $aout}}
+outest "$b lto st mult empty dumpbase unnamed" $mult "-dumpbase \"\" -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{-1.i -1.s -1.o -1.c.???i.icf -2.i -2.s -2.o -2.c.???i.icf a.lto_wrapper_args a.wpa.???i.icf a.ltrans.out a.res a.ltrans0.o a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.ltrans0.ltrans.s a.ltrans0.ltrans.o $aout}}
outest "$b lto st sing dumpdir empty dumpbase named" $sing "-dumpdir dir/ -dumpbase \"\" -o $b-0.exe -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-0.i -0.s -0.o -0.c.???i.icf -0.lto_wrapper_args -0.wpa.???i.icf -0.ltrans.out -0.res -0.ltrans0.o -0.ltrans0.ltrans.???r.final -0.ltrans0.ltrans.su -0.ltrans0.ltrans.s -0.ltrans0.ltrans.o} {-0.exe}}
outest "$b lto st mult dumpdir empty dumpbase named" $mult "-dumpdir dir/ -dumpbase \"\" -o $b-1.exe -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-1.i -1.s -1.o -1.c.???i.icf -2.i -2.s -2.o -2.c.???i.icf -1.lto_wrapper_args -1.wpa.???i.icf -1.ltrans.out -1.res -1.ltrans0.o -1.ltrans0.ltrans.???r.final -1.ltrans0.ltrans.su -1.ltrans0.ltrans.s -1.ltrans0.ltrans.o} {-1.exe}}
outest "$b lto st sing empty dumpbase namedb" $sing "-dumpbase \"\" -o dir/$b.exe -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-0.i -0.s -0.o -0.c.???i.icf .lto_wrapper_args .wpa.???i.icf .ltrans.out .res .ltrans0.o .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .ltrans0.ltrans.s .ltrans0.ltrans.o .exe} {}}
outest "$b lto st mult empty dumpbase namedb" $mult "-dumpbase \"\" -o dir/$b.exe -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-1.i -1.s -1.o -1.c.???i.icf -2.i -2.s -2.o -2.c.???i.icf .lto_wrapper_args .wpa.???i.icf .ltrans.out .res .ltrans0.o .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .ltrans0.ltrans.s .ltrans0.ltrans.o .exe} {}}
# lto save-temps without -dumpbase.
-outest "$b lto st sing unnamed" $sing "-save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{a--0.i a--0.s a--0.o a--0.c.???i.icf a.lto_wrapper_args a.wpa.???i.icf a.ltrans.out a.res a.ltrans0.o a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.ltrans0.ltrans.s a.ltrans0.ltrans.o a.{out,exe}}}
-outest "$b lto st mult unnamed" $mult "-save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {} {{a--1.i a--1.s a--1.o a--1.c.???i.icf a--2.i a--2.s a--2.o a--2.c.???i.icf a.lto_wrapper_args a.wpa.???i.icf a.ltrans.out a.res a.ltrans0.o a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.ltrans0.ltrans.s a.ltrans0.ltrans.o a.{out,exe}}}
+outest "$b lto st sing unnamed" $sing "-save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{a--0.i a--0.s a--0.o a--0.c.???i.icf a.lto_wrapper_args a.wpa.???i.icf a.ltrans.out a.res a.ltrans0.o a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.ltrans0.ltrans.s a.ltrans0.ltrans.o $aout}}
+outest "$b lto st mult unnamed" $mult "-save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage $oaout" {} {{a--1.i a--1.s a--1.o a--1.c.???i.icf a--2.i a--2.s a--2.o a--2.c.???i.icf a.lto_wrapper_args a.wpa.???i.icf a.ltrans.out a.res a.ltrans0.o a.ltrans0.ltrans.???r.final a.ltrans0.ltrans.su a.ltrans0.ltrans.s a.ltrans0.ltrans.o $aout}}
outest "$b lto st sing dumpdir named" $sing "-dumpdir dir/$b- -o $b-0.exe -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.i --0.s --0.o --0.c.???i.icf -lto_wrapper_args -wpa.???i.icf -ltrans.out -res -ltrans0.o -ltrans0.ltrans.???r.final -ltrans0.ltrans.su -ltrans0.ltrans.s -ltrans0.ltrans.o} {-0.exe}}
outest "$b lto st mult dumpdir named" $mult "-dumpdir dir/$b- -o $b-1.exe -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.i --1.s --1.o --1.c.???i.icf --2.i --2.s --2.o --2.c.???i.icf -lto_wrapper_args -wpa.???i.icf -ltrans.out -res -ltrans0.o -ltrans0.ltrans.???r.final -ltrans0.ltrans.su -ltrans0.ltrans.s -ltrans0.ltrans.o} {-1.exe}}
outest "$b lto st sing namedb" $sing "-o dir/$b.exe -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--0.i --0.s --0.o --0.c.???i.icf .lto_wrapper_args .wpa.???i.icf .ltrans.out .res .ltrans0.o .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .ltrans0.ltrans.s .ltrans0.ltrans.o .exe} {}}
outest "$b lto st mult namedb" $mult "-o dir/$b.exe -save-temps -O2 -flto -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{--1.i --1.s --1.o --1.c.???i.icf --2.i --2.s --2.o --2.c.???i.icf .lto_wrapper_args .wpa.???i.icf .ltrans.out .res .ltrans0.o .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .ltrans0.ltrans.s .ltrans0.ltrans.o .exe} {}}
+# !$skip_lto
+}
+
# Below are examples taken from the documentation.
# They are likely redundant with earlier test,
# but we want to make sure behavior matches the docs.
@@ -660,9 +728,10 @@ outest "$b doc double -c !-o -db" $mult "-c -dumpbase $b -fdump-rtl-final -fsta
# gcc -c foo.c -o dir/foobar.o -dumpbase '' ...
outest "$b doc single -c -o -db''" $sing "-c -o dir/$b.o -dumpbase \"\" -fdump-rtl-final -fstack-usage $gsplit_dwarf" {dir/} {{-0.c.???r.final -0.su -0.dwo .o} {}}
+if !$skip_lto {
# gcc foo.c bar.c -o dir/foobar -dumpbase '' -flto ...
outest "$b doc double !-c -o -db'' -flto" $mult "-o dir/$b.exe -dumpbase \"\" -flto -O2 -flto-partition=one -fdump-ipa-icf-optimized -fdump-rtl-final -fstack-usage" {dir/} {{-1.c.???i.icf -2.c.???i.icf .wpa.???i.icf .ltrans0.ltrans.???r.final .ltrans0.ltrans.su .exe} {}}
-
+}
# gcc foo.c -c -o dir/foo.o -dumpbase x-foo.c -dumpbase-ext .c ...
outest "$b doc single -c -o -dbx" $sing "-c -o dir/$b-0.o -dumpbase $b.c -dumpbase-ext .c -fdump-rtl-final -fstack-usage $gsplit_dwarf" {dir/} {{.c.???r.final .su .dwo -0.o} {}}
diff --git a/gcc/testsuite/lib/gcc-defs.exp b/gcc/testsuite/lib/gcc-defs.exp
index fc7e8e2..d591cb3 100644
--- a/gcc/testsuite/lib/gcc-defs.exp
+++ b/gcc/testsuite/lib/gcc-defs.exp
@@ -306,7 +306,9 @@ proc gcc_adjust_linker_flags {} {
set nopts {}
set skip ""
foreach opt [split $opts] {
- if { $skip != "" } then {
+ if { $opt == "" } then {
+ continue
+ } elseif { $skip != "" } then {
set skip ""
} elseif { $opt == "-Xlinker" } then {
set skip $opt
--
Alexandre Oliva, freedom fighter he/him https://FSFLA.org/blogs/lxo/
Free Software Evangelist Stallman was right, but he's left :(
GNU Toolchain Engineer Live long and free, and prosper ethically
next prev parent reply other threads:[~2020-05-27 22:05 UTC|newest]
Thread overview: 117+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-26 5:30 introduce -fcallgraph-info option Alexandre Oliva
2019-10-26 8:12 ` Richard Biener
2019-10-26 11:21 ` Alexandre Oliva
2019-10-27 9:08 ` Alexandre Oliva
2019-10-28 8:38 ` Richard Biener
2019-10-30 10:12 ` Alexandre Oliva
2019-10-30 11:28 ` Richard Biener
2019-11-02 19:31 ` Alexandre Oliva
2019-11-04 8:28 ` Richard Biener
2019-11-06 10:53 ` Alexandre Oliva
2019-11-20 4:35 ` Alexandre Oliva
2019-11-20 9:16 ` Richard Biener
2019-11-06 15:38 ` Alexandre Oliva
2019-11-07 7:49 ` Richard Biener
2019-11-07 10:50 ` Alexandre Oliva
2019-11-07 11:48 ` Richard Biener
2019-11-07 12:30 ` Alexandre Oliva
2019-11-07 14:02 ` Richard Biener
2019-11-07 22:39 ` Alexandre Oliva
2019-11-08 8:28 ` Richard Biener
2019-11-08 23:12 ` Eric Gallager
2019-11-15 1:34 ` Alexandre Oliva
2019-11-15 1:01 ` Alexandre Oliva
2019-11-15 7:30 ` Alexandre Oliva
2019-11-15 8:08 ` Richard Biener
2019-11-15 22:50 ` Alexandre Oliva
2019-12-03 22:44 ` Alexandre Oliva
2019-12-09 9:41 ` Richard Biener
2019-12-12 1:14 ` Alexandre Oliva
2019-12-25 10:05 ` Alexandre Oliva
2019-12-26 19:00 ` drop -aux{dir,base}, revamp -dump{dir,base} (was: Re: introduce -fcallgraph-info option) Alexandre Oliva
2020-01-09 13:33 ` Richard Biener
2020-01-09 19:09 ` drop -aux{dir,base}, revamp -dump{dir,base} Alexandre Oliva
2020-01-16 11:06 ` Alexandre Oliva
2020-01-16 11:15 ` Alexandre Oliva
2020-01-17 2:14 ` Joseph Myers
2020-01-20 10:38 ` Richard Biener
2020-01-22 1:25 ` Alexandre Oliva
2020-01-22 8:15 ` Richard Biener
2020-01-23 20:06 ` Alexandre Oliva
2020-01-24 1:50 ` Alexandre Oliva
2020-05-19 8:51 ` Alexandre Oliva
2020-05-19 8:59 ` Alexandre Oliva
2020-05-19 9:29 ` Richard Biener
2020-05-19 8:59 ` Alexandre Oliva
2020-05-19 9:30 ` Richard Biener
2020-05-19 9:00 ` Alexandre Oliva
2020-05-19 9:04 ` Richard Biener
2020-05-22 0:32 ` Alexandre Oliva
2020-05-22 6:05 ` Richard Biener
2020-05-26 7:08 ` Alexandre Oliva
2020-05-26 8:52 ` Richard Biener
2020-05-26 9:02 ` Martin Liška
2020-05-26 10:00 ` Alexandre Oliva
2020-05-26 12:14 ` Alexandre Oliva
2020-05-26 13:52 ` Alexandre Oliva
2020-05-26 13:56 ` Richard Biener
2020-05-27 22:05 ` Alexandre Oliva [this message]
2020-05-27 23:01 ` Jeff Law
2020-06-02 11:52 ` Alexandre Oliva
2020-06-02 12:02 ` Richard Biener
2020-05-27 1:04 ` Broken build (was: Re: drop -aux{dir,base}, revamp -dump{dir,base}) Hans-Peter Nilsson
2020-05-27 14:30 ` Broken build Alexandre Oliva
2020-05-27 15:04 ` Hans-Peter Nilsson
2020-05-28 0:53 ` Alexandre Oliva
2020-05-28 0:39 ` Anthony Green
2020-06-02 11:29 ` Alexandre Oliva
2020-06-02 14:07 ` Hans-Peter Nilsson
2020-05-27 9:45 ` drop -aux{dir,base}, revamp -dump{dir,base} Andreas Schwab
2020-05-27 10:28 ` Andreas Schwab
2020-05-27 14:41 ` Alexandre Oliva
2020-05-27 14:59 ` Andreas Schwab
2020-06-09 12:29 ` Thomas Schwinge
2020-06-09 12:42 ` BRIG FE testsuite: Fix all dump-scans (Was: Re: drop -aux{dir, base}, revamp -dump{dir, base}) Martin Jambor
2020-06-09 18:31 ` BRIG FE testsuite: Fix all dump-scans (Was: Re: drop -aux{dir,base}, revamp -dump{dir,base}) Mike Stump
2020-06-11 14:28 ` BRIG FE testsuite: Fix all dump-scans (Was: Re: drop -aux{dir, base}, revamp -dump{dir, base}) Martin Jambor
2020-06-12 20:52 ` BRIG FE testsuite: Fix all dump-scans (Was: Re: drop -aux{dir,base}, revamp -dump{dir,base}) Mike Stump
2020-06-10 21:50 ` BRIG FE testsuite: Fix all dump-scans Alexandre Oliva
2020-06-23 9:44 ` drop -aux{dir,base}, revamp -dump{dir,base} Alexandre Oliva
2020-06-23 11:30 ` Martin Jambor
2020-06-09 13:08 ` Thomas Schwinge
2020-06-10 22:24 ` Alexandre Oliva
2020-06-17 10:50 ` Tobias Burnus
2020-06-18 2:58 ` Alexandre Oliva
2020-06-18 6:10 ` Alexandre Oliva
2020-06-18 9:41 ` Tobias Burnus
2020-06-18 10:39 ` Alexandre Oliva
2020-06-18 12:06 ` Tobias Burnus
2020-06-30 16:13 ` Thomas Schwinge
2020-07-14 5:46 ` Alexandre Oliva
2020-07-24 6:08 ` Thomas Schwinge
2020-07-24 17:54 ` Alexandre Oliva
2020-07-14 5:49 ` Alexandre Oliva
2020-06-19 9:53 ` Alexandre Oliva
2020-06-19 16:09 ` Tobias Burnus
2020-06-22 6:08 ` Alexandre Oliva
2020-06-22 7:07 ` Tobias Burnus
2020-06-22 14:32 ` Alexandre Oliva
2020-06-23 8:17 ` Richard Biener
2020-06-30 16:35 ` Thomas Schwinge
2020-07-24 12:06 ` Thomas Schwinge
2020-06-30 18:52 ` Thomas Schwinge
2020-07-14 4:48 ` Alexandre Oliva
2020-07-24 6:01 ` Thomas Schwinge
2020-07-24 18:00 ` Alexandre Oliva
2023-11-24 12:46 ` testsuite: Add 'only_for_offload_target' wrapper for 'scan-offload-tree-dump' etc. (was: drop -aux{dir,base}, revamp -dump{dir,base}) Thomas Schwinge
2020-06-23 9:50 ` drop -aux{dir,base}, revamp -dump{dir,base} Alexandre Oliva
2020-06-30 16:07 ` Thomas Schwinge
2020-07-23 21:12 ` [PR95720] protect gluefile and wrap_flags with -Wl too (was: Re: drop -aux{dir,base}, revamp -dump{dir,base}) Alexandre Oliva
2020-07-24 6:48 ` Richard Biener
2020-05-26 8:09 ` [wwwdocs] Re: drop -aux{dir,base}, revamp -dump{dir,base} Alexandre Oliva
2019-10-28 23:56 ` introduce -fcallgraph-info option Joseph Myers
2019-10-30 9:22 ` Alexandre Oliva
2019-10-30 9:43 ` Alexandre Oliva
2019-10-30 18:17 ` Joseph Myers
2019-11-06 21:27 ` Thomas Schwinge
2019-11-07 11:23 ` Alexandre Oliva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=or4ks16nkv.fsf@livre.home \
--to=oliva@adacore.com \
--cc=ebotcazou@adacore.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=joseph@codesourcery.com \
--cc=rguenther@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).