* updatekey doesn't work? @ 2005-11-19 14:16 Randolph Chung 2005-11-19 16:33 ` Christopher Faylor 0 siblings, 1 reply; 7+ messages in thread From: Randolph Chung @ 2005-11-19 14:16 UTC (permalink / raw) To: overseers tausq@riot:~$ ssh sourceware.org updatekey < hia.pub error unrecognized request `ssh-dss AAAAB3NzaC1kc3MAAACBAPpkGNu6EOb+OrdyDiLe9GSPifbJEHhJxMVD5ovBO4U3MOhraWfMSeJ0LAJo9qfNHRpEj9J3Rk1KPx+Mz9USJEbODU8dQKU7Gj232QFBlsntM6aUY7Ts+VZP+vLASVeu6U72xWtZtytrrv2UY3QDu6pAbKi5jhFscLzmGUOB4JcVAAAAFQC4kgzvesDqlogpUfPtBGbix2GPqwAAAIBseQo+og/MNdNvYtsl0TLVaAjejgYg0JvVe2FKnPInCo2Z6VzH8KERGFY59q02CoJ5bG+4BSyZEYw0YZrn6zbvkPru213Oa3416Ybpsk/JF/y87HhpmrjMYZvk05G8DQy5XuUlKAM2S5DXcH1H2dO8RCFW0BDrQvUJKpnSs2a+fgAAAIEA7kHOWf+bViT7m9l4R2LKguVdpsWqaBPFRCCQDW/inzs9wiQJXahaVHUBWwBExSS+HxFb/K9e3udbuYCm9dFKWIzgRAw7y+znKI/qI0VuKzv7YKa2GxrkmBOujPRvOETGPzX3P94j12SJ4glFk7tpqy5qSp1yi/fQeHVC+AfimgU= tausq@hiauly3.hia.nrc.ca' is that the right procedure to use to add a key to my authorized_keys file? randolph ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: updatekey doesn't work? 2005-11-19 14:16 updatekey doesn't work? Randolph Chung @ 2005-11-19 16:33 ` Christopher Faylor [not found] ` <43913EFE.3060801@tausq.org> 0 siblings, 1 reply; 7+ messages in thread From: Christopher Faylor @ 2005-11-19 16:33 UTC (permalink / raw) To: Randolph Chung, overseers On Sat, Nov 19, 2005 at 03:16:44PM +0800, Randolph Chung wrote: >tausq@riot:~$ ssh sourceware.org updatekey < hia.pub >error unrecognized request `ssh-dss >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 >tausq@hiauly3.hia.nrc.ca' > >is that the right procedure to use to add a key to my authorized_keys file? For gcc people, yes. People in the gcc group were transitioned to use a system which understands "updatekey". You are a member of the gdb group and, since gdb still uses cvs, there was no reason to switch you. I've modified your account so that you can use updatekey now, however. cgf ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <43913EFE.3060801@tausq.org>]
* Re: updatekey doesn't work? [not found] ` <43913EFE.3060801@tausq.org> @ 2005-12-04 2:40 ` Christopher Faylor 2005-12-04 3:16 ` Randolph Chung 0 siblings, 1 reply; 7+ messages in thread From: Christopher Faylor @ 2005-12-04 2:40 UTC (permalink / raw) To: Randolph Chung; +Cc: overseers [please use the overseers mailing list for sourceware requests] On Sat, Dec 03, 2005 at 02:45:18PM +0800, Randolph Chung wrote: >Christopher Faylor wrote: >>On Sat, Nov 19, 2005 at 03:16:44PM +0800, Randolph Chung wrote: >>>is that the right procedure to use to add a key to my authorized_keys >>>file? >> >> >>For gcc people, yes. People in the gcc group were transitioned to use >>a system which understands "updatekey". You are a member of the gdb group >>and, since gdb still uses cvs, there was no reason to switch you. >> >>I've modified your account so that you can use updatekey now, however. > >i finally had a chance to try this, and it still doens't work, >unfortunately. Try it again. cgf ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: updatekey doesn't work? 2005-12-04 2:40 ` Christopher Faylor @ 2005-12-04 3:16 ` Randolph Chung 2005-12-04 4:28 ` Christopher Faylor 0 siblings, 1 reply; 7+ messages in thread From: Randolph Chung @ 2005-12-04 3:16 UTC (permalink / raw) To: overseers Christopher Faylor wrote: > [please use the overseers mailing list for sourceware requests] > On Sat, Dec 03, 2005 at 02:45:18PM +0800, Randolph Chung wrote: > >>Christopher Faylor wrote: >> >>>On Sat, Nov 19, 2005 at 03:16:44PM +0800, Randolph Chung wrote: >>> >>>>is that the right procedure to use to add a key to my authorized_keys >>>>file? >>> >>> >>>For gcc people, yes. People in the gcc group were transitioned to use >>>a system which understands "updatekey". You are a member of the gdb group >>>and, since gdb still uses cvs, there was no reason to switch you. >>> >>>I've modified your account so that you can use updatekey now, however. >> >>i finally had a chance to try this, and it still doens't work, >>unfortunately. > > > Try it again. Sorry, still doesn't work. randolph ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: updatekey doesn't work? 2005-12-04 3:16 ` Randolph Chung @ 2005-12-04 4:28 ` Christopher Faylor 2005-12-06 0:32 ` Randolph Chung 0 siblings, 1 reply; 7+ messages in thread From: Christopher Faylor @ 2005-12-04 4:28 UTC (permalink / raw) To: Randolph Chung, overseers On Sun, Dec 04, 2005 at 09:52:37AM +0800, Randolph Chung wrote: >Christopher Faylor wrote: >>[please use the overseers mailing list for sourceware requests] >>On Sat, Dec 03, 2005 at 02:45:18PM +0800, Randolph Chung wrote: >> >>>Christopher Faylor wrote: >>> >>>>On Sat, Nov 19, 2005 at 03:16:44PM +0800, Randolph Chung wrote: >>>> >>>>>is that the right procedure to use to add a key to my authorized_keys >>>>>file? >>>> >>>> >>>>For gcc people, yes. People in the gcc group were transitioned to use >>>>a system which understands "updatekey". You are a member of the gdb >>>>group >>>>and, since gdb still uses cvs, there was no reason to switch you. >>>> >>>>I've modified your account so that you can use updatekey now, however. >>> >>>i finally had a chance to try this, and it still doens't work, >>>unfortunately. >> >> >>Try it again. > >Sorry, still doesn't work. "doesn't work" == ? It should at least be different. cgf ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: updatekey doesn't work? 2005-12-04 4:28 ` Christopher Faylor @ 2005-12-06 0:32 ` Randolph Chung 2005-12-06 17:10 ` Christopher Faylor 0 siblings, 1 reply; 7+ messages in thread From: Randolph Chung @ 2005-12-06 0:32 UTC (permalink / raw) To: Christopher Faylor; +Cc: overseers >>>Try it again. >> >>Sorry, still doesn't work. > > > "doesn't work" == ? > > It should at least be different. seems the same: tausq@riot:~$ ssh -v sources.redhat.com updatekey < hia.pub OpenSSH_4.2p1 Debian-5, OpenSSL 0.9.8a 11 Oct 2005 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to sources.redhat.com [209.132.176.174] port 22. debug1: Connection established. debug1: identity file /home/tausq/.ssh/identity type -1 debug1: identity file /home/tausq/.ssh/id_rsa type -1 debug1: identity file /home/tausq/.ssh/id_dsa type 2 debug1: Remote protocol version 1.99, remote software version OpenSSH_3.9p1 debug1: match: OpenSSH_3.9p1 pat OpenSSH_3.* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.2p1 Debian-5 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'sources.redhat.com' is known and matches the RSA host key. debug1: Found key in /home/tausq/.ssh/known_hosts:8 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic debug1: Next authentication method: publickey debug1: Trying private key: /home/tausq/.ssh/identity debug1: Trying private key: /home/tausq/.ssh/id_rsa debug1: Offering public key: /home/tausq/.ssh/id_dsa debug1: Remote: Port forwarding disabled. debug1: Remote: X11 forwarding disabled. debug1: Remote: Agent forwarding disabled. debug1: Remote: Forced command: /usr/local/bin/cvs server debug1: Server accepts key: pkalg ssh-dss blen 434 debug1: read PEM private key done: type DSA debug1: Remote: Port forwarding disabled. debug1: Remote: X11 forwarding disabled. debug1: Remote: Agent forwarding disabled. debug1: Remote: Forced command: /usr/local/bin/cvs server debug1: Authentication succeeded (publickey). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending command: updatekey error unrecognized request `ssh-dss 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 tausq@hiauly3.hia.nrc.ca' debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.3 seconds debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0 debug1: Exit status 0 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: updatekey doesn't work? 2005-12-06 0:32 ` Randolph Chung @ 2005-12-06 17:10 ` Christopher Faylor 0 siblings, 0 replies; 7+ messages in thread From: Christopher Faylor @ 2005-12-06 17:10 UTC (permalink / raw) To: Randolph Chung, overseers On Sun, Dec 04, 2005 at 11:15:55AM +0800, Randolph Chung wrote: >>>>Try it again. >>> >>>Sorry, still doesn't work. >> >> >>"doesn't work" == ? >> >>It should at least be different. > >seems the same: > >tausq@riot:~$ ssh -v sources.redhat.com updatekey < hia.pub >debug1: Remote: Forced command: /usr/local/bin/cvs server Ah, I see. I forgot to remove the cvs server restriction from .ssh/authorized_keys. It should work now. cgf ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-12-04 4:28 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-11-19 14:16 updatekey doesn't work? Randolph Chung 2005-11-19 16:33 ` Christopher Faylor [not found] ` <43913EFE.3060801@tausq.org> 2005-12-04 2:40 ` Christopher Faylor 2005-12-04 3:16 ` Randolph Chung 2005-12-04 4:28 ` Christopher Faylor 2005-12-06 0:32 ` Randolph Chung 2005-12-06 17:10 ` Christopher Faylor
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).