* [commit] Use __SIGRTMIN and __SIGRTMAX when mapping signals
@ 2005-12-07 18:32 Kevin Buettner
0 siblings, 0 replies; only message in thread
From: Kevin Buettner @ 2005-12-07 18:32 UTC (permalink / raw)
To: rda
I've just committed the patch below.
RDA maps target specific signal numbers to signal numbers which GDB
uses. Until now, RDA was using SIGRTMIN and SIGRTMAX for computing
part of this mapping. On a GNU(ish) system, these macros are defined
to call functions which compute the actual minimum and maximum
realtime signal numbers. In particular, this computation will exclude
any signals used by the C library for its own purposes. These signals
could include signals related to thread debugging or, more
importantly, for thread cancellation.
If these signals are ignored by the mapping computation, then they
will be sent to GDB as signal 0. This is not only uninformative, but
it also makes it impossible to continue the program with the desired
signal.
The patch below makes RDA use __SIGRTMIN and __SIGRTMAX for the signal
mapping computations instead. These constants represent a hard minumum
and maximum.
* ptrace-target.c (ptrace_compute_signal, ptrace_process_signal):
Use __SIGRTMIN in place of SIGRTMIN. Use __SIGRTMAX in place of
SIGRTMAX.
(ptrace_compute_signal): Consolidate logic which computes return
value.
Index: ptrace-target.c
===================================================================
RCS file: /cvs/src/src/rda/unix/ptrace-target.c,v
retrieving revision 1.12
diff -u -p -r1.12 ptrace-target.c
--- ptrace-target.c 7 Dec 2005 17:51:48 -0000 1.12
+++ ptrace-target.c 7 Dec 2005 18:11:20 -0000
@@ -665,13 +665,9 @@ ptrace_compute_signal (struct gdbserv *s
if (tgtsig == SIGPWR)
return GDBSERV_SIGPWR;
#endif
-#if defined (SIGRTMIN) && defined (SIGRTMAX)
- if (tgtsig == SIGRTMIN)
- return GDBSERV_SIGRT32;
- if (tgtsig == SIGRTMIN + 32)
- return GDBSERV_SIGRT64;
- if (tgtsig > SIGRTMIN && tgtsig < SIGRTMAX)
- return GDBSERV_SIGRT33 + tgtsig - 1;
+#if defined (__SIGRTMIN) && defined (__SIGRTMAX)
+ if (tgtsig >= __SIGRTMIN && tgtsig < __SIGRTMAX)
+ return GDBSERV_SIGRT32 + tgtsig - __SIGRTMIN;
return GDBSERV_SIGNONE; /* ? */
#endif
}
@@ -915,73 +911,73 @@ ptrace_process_signal (struct gdbserv *s
case GDBSERV_SIGPRIO:
process->signal_to_send = SIGPRIO; break;
#endif
-#if defined (SIGRTMIN) && defined (SIGRTMAX)
+#if defined (__SIGRTMIN) && defined (__SIGRTMAX)
case GDBSERV_SIGRT32:
- process->signal_to_send = SIGRTMIN; break;
+ process->signal_to_send = __SIGRTMIN; break;
case GDBSERV_SIGRT33:
- process->signal_to_send = SIGRTMIN+1; break;
+ process->signal_to_send = __SIGRTMIN+1; break;
case GDBSERV_SIGRT34:
- process->signal_to_send = SIGRTMIN+2; break;
+ process->signal_to_send = __SIGRTMIN+2; break;
case GDBSERV_SIGRT35:
- process->signal_to_send = SIGRTMIN+3; break;
+ process->signal_to_send = __SIGRTMIN+3; break;
case GDBSERV_SIGRT36:
- process->signal_to_send = SIGRTMIN+4; break;
+ process->signal_to_send = __SIGRTMIN+4; break;
case GDBSERV_SIGRT37:
- process->signal_to_send = SIGRTMIN+5; break;
+ process->signal_to_send = __SIGRTMIN+5; break;
case GDBSERV_SIGRT38:
- process->signal_to_send = SIGRTMIN+6; break;
+ process->signal_to_send = __SIGRTMIN+6; break;
case GDBSERV_SIGRT39:
- process->signal_to_send = SIGRTMIN+7; break;
+ process->signal_to_send = __SIGRTMIN+7; break;
case GDBSERV_SIGRT40:
- process->signal_to_send = SIGRTMIN+8; break;
+ process->signal_to_send = __SIGRTMIN+8; break;
case GDBSERV_SIGRT41:
- process->signal_to_send = SIGRTMIN+9; break;
+ process->signal_to_send = __SIGRTMIN+9; break;
case GDBSERV_SIGRT42:
- process->signal_to_send = SIGRTMIN+10; break;
+ process->signal_to_send = __SIGRTMIN+10; break;
case GDBSERV_SIGRT43:
- process->signal_to_send = SIGRTMIN+11; break;
+ process->signal_to_send = __SIGRTMIN+11; break;
case GDBSERV_SIGRT44:
- process->signal_to_send = SIGRTMIN+12; break;
+ process->signal_to_send = __SIGRTMIN+12; break;
case GDBSERV_SIGRT45:
- process->signal_to_send = SIGRTMIN+13; break;
+ process->signal_to_send = __SIGRTMIN+13; break;
case GDBSERV_SIGRT46:
- process->signal_to_send = SIGRTMIN+14; break;
+ process->signal_to_send = __SIGRTMIN+14; break;
case GDBSERV_SIGRT47:
- process->signal_to_send = SIGRTMIN+15; break;
+ process->signal_to_send = __SIGRTMIN+15; break;
case GDBSERV_SIGRT48:
- process->signal_to_send = SIGRTMIN+16; break;
+ process->signal_to_send = __SIGRTMIN+16; break;
case GDBSERV_SIGRT49:
- process->signal_to_send = SIGRTMIN+17; break;
+ process->signal_to_send = __SIGRTMIN+17; break;
case GDBSERV_SIGRT50:
- process->signal_to_send = SIGRTMIN+18; break;
+ process->signal_to_send = __SIGRTMIN+18; break;
case GDBSERV_SIGRT51:
- process->signal_to_send = SIGRTMIN+19; break;
+ process->signal_to_send = __SIGRTMIN+19; break;
case GDBSERV_SIGRT52:
- process->signal_to_send = SIGRTMIN+20; break;
+ process->signal_to_send = __SIGRTMIN+20; break;
case GDBSERV_SIGRT53:
- process->signal_to_send = SIGRTMIN+21; break;
+ process->signal_to_send = __SIGRTMIN+21; break;
case GDBSERV_SIGRT54:
- process->signal_to_send = SIGRTMIN+22; break;
+ process->signal_to_send = __SIGRTMIN+22; break;
case GDBSERV_SIGRT55:
- process->signal_to_send = SIGRTMIN+23; break;
+ process->signal_to_send = __SIGRTMIN+23; break;
case GDBSERV_SIGRT56:
- process->signal_to_send = SIGRTMIN+24; break;
+ process->signal_to_send = __SIGRTMIN+24; break;
case GDBSERV_SIGRT57:
- process->signal_to_send = SIGRTMIN+25; break;
+ process->signal_to_send = __SIGRTMIN+25; break;
case GDBSERV_SIGRT58:
- process->signal_to_send = SIGRTMIN+26; break;
+ process->signal_to_send = __SIGRTMIN+26; break;
case GDBSERV_SIGRT59:
- process->signal_to_send = SIGRTMIN+27; break;
+ process->signal_to_send = __SIGRTMIN+27; break;
case GDBSERV_SIGRT60:
- process->signal_to_send = SIGRTMIN+28; break;
+ process->signal_to_send = __SIGRTMIN+28; break;
case GDBSERV_SIGRT61:
- process->signal_to_send = SIGRTMIN+29; break;
+ process->signal_to_send = __SIGRTMIN+29; break;
case GDBSERV_SIGRT62:
- process->signal_to_send = SIGRTMIN+30; break;
+ process->signal_to_send = __SIGRTMIN+30; break;
case GDBSERV_SIGRT63:
- process->signal_to_send = SIGRTMIN+31; break;
+ process->signal_to_send = __SIGRTMIN+31; break;
case GDBSERV_SIGRT64:
- process->signal_to_send = SIGRTMIN+32; break;
+ process->signal_to_send = __SIGRTMIN+32; break;
#endif
}
/* Since we will handle the signal, we don't want gdbserv
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-12-07 18:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-12-07 18:32 [commit] Use __SIGRTMIN and __SIGRTMAX when mapping signals Kevin Buettner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).