From: Syd Polk <jazzman@bayarea.net>
To: Bruce Edson <bruce@steptech.com>
Cc: sourcenav@sources.redhat.com
Subject: Re: Headaches building Source Navigator under Windows
Date: Fri, 22 Feb 2002 13:23:00 -0000 [thread overview]
Message-ID: <1E1B8A14-27DA-11D6-8F1C-000A27917828@bayarea.net> (raw)
In-Reply-To: <26F9F6EAB586D411850700B0D049E6E4014D2E48@shasta.pdx.steptech.com>
On Friday, February 22, 2002, at 01:07 , Bruce Edson wrote:
> Thanks Ian.
>
> I went to Cygwin site and figured out how to get the rest of the
> utilities.
> So, now I am at the point where the 'configure' as described in the
> readme
> file, breaks with the following errors. Could you possibly give me some
> direction on them? I've numbered the output for each issue I saw as it
> ran.
>
> Directory tree I'm using:
>
> C:/docume~1/bruce/hpkeck~1/snkeck~1 is where Cygwin and bin utilities
> are
> installed
> C:/docume~1/bruce/hpkeck~1/snkeck~1/source is where the Source
> Navigator
> source is
> C:/docume~1/bruce/hpkeck~1/snkeck~1/snbuild is where my build
> directory
> is
>
> I execute the configure from snbuild by invoking the following:
>
> ../sourc/configure --host=i686-pc-cygwin
> --prefix="c:/docume~1/bruce/hpkeck~1/snkeck~1/opt/sourcenav"
>
Do you mean ../source/configure?
>
> 1.
> grep: /source/libstdc++-v3/configure.in: No such file or directory
This is probably benign.
>
> 2.
> configuring in itcl/win
> running /bin/sh ../../../../source/itcl/itcl/win/configure
> --host=i686-pc-cygwin --target=i686-pc-cygwin
> '--prefix=c:/docume~1/bruce/hpkeck~1/snkeck~1/opt/sourcenav'
> --cache-file=../../../config.cache
> --srcdir=../../../../source/itcl/itcl/win
> cd: can't cd to ../../../tcl/win
>
This is also benign. It tries in two locations.
>
> 3.
> configuring in itk/win
> running /bin/sh ../../../../source/itcl/itk/win/configure
> --host=i686-pc-cygwin
> --target=i686-pc-cygwin
> '--prefix=c:/docume~1/bruce/hpkeck~1/snkeck~1/opt/sourc
> enav' --cache-file=../../../config.cache
> --srcdir=../../../../source/itcl/itk/win
> cd: can't cd to ../../../tcl/win
> cd: can't cd to ../../../tk/win
>
This is also benign.
> 4.
> Configuring libgui...
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... missing
>
This is also benign...
> 5.
> Configuring grep...
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... missing
>
ditto...
> 6.
> Configuring snavigator...
> checking for Tcl configuration script... (cached)
> /snbuild/tcl8.1/unix/tclConfig.sh
> checking for Tk configuration script... (cached)
> /snbuild/tk8.1/unix/tkConfig.sh
> checking for Tcl headers in the source tree... (cached) configure:
> error:
> Can't find any Tcl headers
> Configure in /snbuild/snavigator failed, exiting.
>
Where is your tcl.h? Do you have a preinstalled tcl/tk? Or did you check
it out with snavigator? The problem here is that it cannot find tcl.h.
> Thanks.
>
> Bruce
>
> -----Original Message-----
> From: Ian Roxborough [mailto:irox@redhat.com]
> Sent: Thursday, February 21, 2002 7:03 PM
> To: Bruce Edson
> Cc: sourcenav@sources.redhat.com
> Subject: Re: Headaches building Source Navigator under Windows
>
>
>
> Hi,
>
> you need a full working Cygwin environment (which is kind
> of like UNIX) to build Source-Navigators, the include
> development tools like "make" (maybe in the usertools
> and binutils packages?).
>
> Don't know a great deal about Cygwin, but there is
> a bunch of information over at:
> http://www.cygwin.com/
>
> I don't remember much about building on HP-UX, I'm
> not sure if you'll need gcc or the HP-UX compiler.
>
> Any HP-UX users got any tips?
>
> Ian.
>
> Bruce Edson wrote:
>>
>> Hi all,
>>
>> I've just been put on a project that requires creating a modified
>> version
> of
>> Source Navigator that runs under Windows 2000 and HP-UX. My first
>> task is
>> to get a buildable version working under Windows 2000. When I get
>> tired
> of
>> that, I get to do it again under HP-UX.
>>
>> Anyway, to my point, I've read a lot of docs, readmes and a lot of the
>> emails regarding doing this under Windows. This is totally new to me
>> so
>> bare with me. I am familiar with VC++ 6.0 and that is what is
>> installed
> on
>> my Windows system. The directions in the Readme seem to take into
>> account
>> details that are not obvious to me. For instance, where do I put the
> Cygwin
>> stuff in relation to the sources (it assumes I already have it), why
> doesn't
>> the source tree come with make.exe, etc. The source I downloaded came
> from
>> SN50-010322-source.zip.
>>
>> I've set up the environment with limited success creating the make
>> file,
>> when making my source directory a sub-directory of where the Cygwin.bat
> file
>> is installed. I did see some errors, mainly couldn't find a certain
>> file.
>> But it made a makefile. However, the make doesn't run now because
> make.exe
>> doesn't exist. Do I need to get that too? Where do I get one that is
>> already built. What other issues am I going to run into?
>>
>> Long story short, is there a much more detailed, or canned approach
>> available that I can follow step by step knowing I have a Windows
>> system
>> with just VC++6.0 loaded on it? One that includes everything that I
>> need
> to
>> download and what/how to configure? I'm not real familiar with the
>> unix
>> arena but am with the Windows. Any help would be greatly appreciated.
>>
>> The downloaded executable forms of SN work great on Windows, so I know
>> it
> is
>> buildable.
>>
>> Thanks in advance.
>>
>> Bruce Edson
>
>
Syd Polk
QA and Integration Manager, Mac OS X Development Tools
+1 408 974-0577
next prev parent reply other threads:[~2002-02-22 21:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-22 13:21 Bruce Edson
2002-02-22 13:23 ` Syd Polk [this message]
2002-02-22 13:32 ` Ian Roxborough
2002-02-26 9:12 ` Mo DeJong
2002-02-26 9:20 ` Syd Polk
2002-02-27 8:32 ` Ralf Corsepius
-- strict thread matches above, loose matches on Subject: below --
2002-02-26 12:30 Bruce Edson
2002-02-26 12:12 Bruce Edson
2002-02-26 0:23 Bruce Edson
2002-02-22 13:52 Bruce Edson
2002-02-22 14:48 ` Ian Roxborough
2002-02-21 17:47 Bruce Edson
2002-02-21 18:08 ` Ian Roxborough
2002-02-21 18:33 ` Mo DeJong
2002-02-21 18:35 ` Ian Roxborough
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1E1B8A14-27DA-11D6-8F1C-000A27917828@bayarea.net \
--to=jazzman@bayarea.net \
--cc=bruce@steptech.com \
--cc=sourcenav@sources.redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).