public inbox for sourcenav@sourceware.org
 help / color / mirror / Atom feed
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar  file gives a checksum error
@ 2000-08-18  1:30 Rouviere, Stephane
  2000-08-18  3:04 ` Johan Vermeire WX21 54189
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Rouviere, Stephane @ 2000-08-18  1:30 UTC (permalink / raw)
  To: 'Johan Vermeire WX21 54189', Syd Polk; +Cc: sourcenav

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 14214 bytes --]

Hello,
 
I had 
the same problem with the tar: directory checksum error.
It 
seams to be a Sun tar problem.
I took 
a gnu version of tar, recompiled it under SunOS and then untar SN451.tar with it 
and it works. The checksum error desappear.
 
Hope 
it will help you
 
Stéphane
 

  -----Original Message----- From: Johan Vermeire WX21 54189 
  [mailto:Johan.Vermeire@alcatel.be] Sent: jeudi 17 août 2000 
  14:12 To: Syd Polk Cc: 
  sourcenav@sources.redhat.com Subject: Re: Source Navigator 4.5.1 
  -> Configure problem -> Unpacking the tar file gives a checksum 
  error Hi Syd, 
  Thanks for your reply. 
  I've re-done the installation and I've the same problem with the 
  configuration of SourceNavigator 4.51   
  After unpacking the tar file: 
  I got at the end the following message: 
  .... x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCascaded_Use_of_Macros.html, 
  3883 bytes, 8 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCombining_Source_Files.html, 
  8168 bytes, 16 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConcatenation.html, 
  6850 bytes, 14 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals.html, 
  4326 bytes, 9 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals_and_Macros.html, 
  9793 bytes, 20 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppDuplication_of_Side_Effects.html, 
  5804 bytes, 12 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHeader_Files.html, 
  2793 bytes, 6 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHow_include_Works.html, 
  4383 bytes, 9 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppImproperly_Nested_Constructs.html, 
  2880 bytes, 6 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInheritance_and_Header_Files.html, 
  6463 bytes, 13 tape blocks x 
  SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInvoking_the_C_Preprocessor.html, 
  35022 bytes, 69 tape blocks tar: directory checksum 
  error 
  Is the tar file complete??? 
  The size of the Gunzipped tar file: 
  btm0gn:/home/jvme/bin> ls -al SN451.tar -rw-r--r--   1 
  jvme     xantium  59944960 Aug 17 13:50 SN451.tar 
  The contents after Configuring is: 
  btm0gn:/home/jvme/bin/SN451/build> ../configure 
  --prefix=/cmx_tools/3EZ01881_SourceNavigator Configuring for a 
  sparc-sun-solaris2.6 host. Created "Makefile" in 
  /home/jvme/bin/SN451/build using "mh-frag" Configuring db... creating 
  cache ../config.cache ... 
  ... checking for uid_t in sys/types.h... yes checking for Tcl 
  configuration script... configure: warning: Can't find Tcl configuration 
  definitions checking for Tk configuration script... configure: warning: 
  Can't find Tk configuration definitions checking for Tcl headers in the 
  source tree... none checking for tcl.h... no configure: error: Can't find any Tcl headers Configure in /home/jvme/bin/SN451/build/itcl failed, 
  exiting. 
  btm0gn:/home/jvme/bin/SN451/build> cd .. 
  btm0gn:/home/jvme/bin/SN451> ls -al total 1664 drwxr-xr-x  
  11 jvme     xantium     8192 Aug 17 
  13:57 . drwxr-xr-x  46 jvme     
  xantium     8192 Aug 17 13:52 .. 
  -rw-r-----   1 jvme     
  xantium    18007 May  1  1998 COPYING 
  -rw-r-----   1 jvme     
  xantium    25283 May 12  1998 COPYING.LIB 
  -rw-r-----   1 jvme     xantium   
  208768 Jul 10 22:29 ChangeLog -rw-r-----   1 
  jvme     xantium    52710 Jul 10 22:29 
  Makefile.in -rw-r-----   1 jvme     
  xantium     1719 May  1  1998 README 
  drwxr-xr-x   5 jvme     
  xantium     8192 Aug 17 14:00 build 
  drwxr-xr-x   3 jvme     
  xantium     8192 Jul 10 23:46 config 
  -rw-r-----   1 jvme     
  xantium    17126 Jul 10 22:29 config-ml.in 
  -rwxr-x---   1 jvme     
  xantium    26831 Oct 10  1998 config.guess 
  -rw-r-----   1 jvme     
  xantium     2010 Oct 19  1998 config.if 
  -rwxr-x---   1 jvme     
  xantium    26166 Jul 10 22:29 config.sub 
  -rwxr-x---   1 jvme     
  xantium    50317 Jul 10 22:29 configure 
  -rw-r-----   1 jvme     
  xantium    36104 Jul 10 22:29 configure.in drwxr-xr-x  
  12 jvme     xantium     8192 Jul 10 
  22:29 db drwxr-xr-x   5 jvme     
  xantium     8192 Jul 10 23:46 etc 
  drwxr-xr-x   8 jvme     
  xantium     8192 Jul 10 23:46 grep 
  drwxr-xr-x   2 jvme     
  xantium     8192 Jul 10 23:46 include 
  -rwxr-x---   1 jvme     
  xantium     5598 Jul 15  1998 install-sh 
  drwxr-xr-x   8 jvme     
  xantium     8192 Jul 10 23:46 itcl 
  drwxr-xr-x   5 jvme     
  xantium     8192 Jul 10 23:46 libgui 
  -rwxr-x---   1 jvme     
  xantium    51498 Jul  7  1998 ltconfig 
  -rw-r-----   1 jvme     
  xantium    75122 Jul 14  1998 ltmain.sh 
  -rwxr-x---   1 jvme     
  xantium     6274 Jun 10  1998 missing 
  -rwxr-x---   1 jvme     
  xantium      730 May  1  1998 mkinstalldirs 
  -rwxr-x---   1 jvme     
  xantium      869 May  1  1998 
  move-if-change -rw-r-----   1 jvme     
  xantium    14898 May  1  1998 mpw-README 
  -rw-r-----   1 jvme     
  xantium     5169 May  1  1998 mpw-build.in 
  -rw-r-----   1 jvme     
  xantium     4742 May  1  1998 mpw-config.in 
  -rw-r-----   1 jvme     
  xantium    14664 May  1  1998 mpw-configure 
  -rw-r-----   1 jvme     
  xantium     3171 May  1  1998 mpw-install 
  drwxr-xr-x   6 jvme     
  xantium     8192 Aug 17 13:53 snavigator 
  btm0gn:/home/jvme/bin/SN451> dir drwxr-xr-x  11 
  jvme     xantium     8192 Aug 17 13:57 
  . drwxr-xr-x  46 jvme     
  xantium     8192 Aug 17 13:52 .. 
  drwxr-xr-x   5 jvme     
  xantium     8192 Aug 17 14:00 build 
  drwxr-xr-x   3 jvme     
  xantium     8192 Jul 10 23:46 config drwxr-xr-x  
  12 jvme     xantium     8192 Jul 10 
  22:29 db drwxr-xr-x   5 jvme     
  xantium     8192 Jul 10 23:46 etc 
  drwxr-xr-x   8 jvme     
  xantium     8192 Jul 10 23:46 grep 
  drwxr-xr-x   2 jvme     
  xantium     8192 Jul 10 23:46 include 
  drwxr-xr-x   8 jvme     
  xantium     8192 Jul 10 23:46 itcl 
  drwxr-xr-x   5 jvme     
  xantium     8192 Jul 10 23:46 libgui 
  drwxr-xr-x   6 jvme     
  xantium     8192 Aug 17 13:53 snavigator 
  btm0gn:/home/jvme/bin/SN451> 
  I don't see a tcl and tk directory! 
    

  Best Regards, 
  Johan     
  Syd Polk wrote: 
  You must use the tcl code provided with the 
    Source-Navigator package. Did you by chance delete the tcl and tk 
    directories after you expanded the tarball? 
    Johan Vermeire WX21 54189 wrote: > > Hi, > > 
    I don't know to where I've to send SN bug (configure) reports, therefore I 
    > mail to you. > Sorry, if I'm not at the right person. 
    > > ./. > > I started today with a first attempt 
    to rebuild SN451 from scratch. > > 
    btm0gn:/home/jvme/bin/SN451> ./configure > 
    --prefix=/cmx_tools/3EZ01881_SourceNavigator > Configuring for a 
    sparc-sun-solaris2.6 host. > Created "Makefile" in 
    /home/jvme/bin/SN451 using "mh-frag" > ./config.status is unchanged 
    > Configuring db... > loading cache ../config.cache > 
    checking for a BSD compatible install... ./install-sh -c > checking 
    whether build environment is sane... yes > checking whether make sets 
    ${MAKE}... (cached) yes > checking for working aclocal... missing 
    > checking for working autoconf... missing > checking for 
    working automake... missing > checking for working autoheader... 
    missing > checking for working makeinfo... missing > checking 
    whether to enable maintainer-specific portions of Makefiles... no > 
    checking whether make sets ${MAKE}... (cached) yes > checking for 
    gcc... (cached) gcc > checking whether the C compiler (gcc -g -O2 ) 
    works... yes > checking whether the C compiler (gcc -g -O2 ) is a 
    cross-compiler... no > checking whether we are using GNU C... 
    (cached) yes > checking whether gcc accepts -g... (cached) yes 
    > checking how to run the C preprocessor... (cached) gcc -E > 
    checking for cygwin32 environment... (cached) no > checking for 
    mingw32 environment... (cached) no > checking for executable 
    suffix... (cached) no > checking for object suffix... (cached) o 
    > checking for ranlib... (cached) ranlib > checking for 
    false... (cached) /usr/bin/false > checking for sh... (cached) 
    /usr/bin/sh > checking for sh5... (cached) /usr/bin/false > 
    checking for bash... (cached) /usr/bin/bash > checking for 
    cygwin32... (cached) no > checking for Microsoft Visual C++... 
    (cached) no > checking checking for shell with functions... (cached) 
    /usr/bin/sh > checking for dirent.h that defines DIR... (cached) yes 
    > checking for opendir in -ldir... (cached) no > checking for 
    ANSI C header files... (cached) yes > checking for sys/wait.h that is 
    POSIX.1 compatible... (cached) yes > checking for fcntl.h... (cached) 
    yes > checking for limits.h... (cached) yes > checking for 
    sys/time.h... (cached) yes > checking for unistd.h... (cached) yes 
    > checking for ssize_t... (cached) yes > checking for 
    pgno_t... (cached) no > checking whether byte ordering is 
    bigendian... (cached) yes > checking for working const... (cached) 
    yes > checking whether time.h and sys/time.h may both be included... 
    (cached) yes > checking for st_blksize in struct stat... (cached) yes 
    > checking for mode_t... (cached) yes > checking for off_t... 
    (cached) yes > checking for pid_t... (cached) yes > checking 
    for size_t... (cached) yes > checking for u_char... (cached) yes 
    > checking for vprintf... (cached) yes > checking for 
    unistd.h... (cached) yes > checking for getpagesize... (cached) yes 
    > checking for working mmap... (cached) yes > checking for 
    mkdir... (cached) yes > checking for rmdir... (cached) yes > 
    checking for select... (cached) yes > checking for memmove... 
    (cached) yes > checking for snprintf... (cached) yes > 
    checking for strerror... (cached) yes > checking for sprintf return 
    value... (cached) yes > checking for int8_t... (cached) yes > 
    checking for u_int8_t... (cached) no > checking for int16_t... 
    (cached) yes > checking for u_int16_t... (cached) no > 
    checking for int32_t... (cached) yes > checking for u_int32_t... 
    (cached) no > checking for int64_t... (cached) yes > checking 
    for u_int64_t... (cached) no > creating ./config.status > 
    creating Makefile > creating PORT/Makefile > creating config.h 
    > config.h is unchanged > Configuring itcl... > loading 
    cache ../config.cache > checking for a BSD compatible install... 
    ./../install-sh -c > checking for ranlib... (cached) ranlib > 
    checking for gcc... (cached) gcc > checking whether the C compiler 
    (gcc -g -O2 ) works... yes > checking whether the C compiler (gcc -g 
    -O2 ) is a cross-compiler... no > checking whether we are using GNU 
    C... (cached) yes > checking whether gcc accepts -g... (cached) yes 
    > checking how to run the C preprocessor... (cached) gcc -E > 
    checking for object suffix... (cached) o > checking for cygwin32 
    environment... (cached) no > checking for mingw32 environment... 
    (cached) no > checking for executable suffix... (cached) no > 
    checking for ANSI C header files... (cached) yes > checking for 
    mode_t... (cached) yes > checking for pid_t... (cached) yes > 
    checking for size_t... (cached) yes > checking for uid_t in 
    sys/types.h... yes > checking for Tcl configuration script... 
    configure: warning: Can't find Tcl > configuration definitions 
    > checking for Tk configuration script... configure: warning: Can't 
    find Tk > configuration definitions > checking for Tcl headers 
    in the source tree... none > checking for tcl.h... no > 
    configure: error: Can't find any Tcl headers > Configure in 
    /home/jvme/bin/SN451/itcl failed, exiting. > 
    btm0gn:/home/jvme/bin/SN451> > > And the make doesn't 
    start: > > btm0gn:/home/jvme/bin/SN451> make > 
    make  all-recursive > Making all in PORT > mksh: Fatal 
    error in reader: = missing from replacement macro reference > Current 
    working directory /home/jvme/bin/SN451/db/PORT > *** Error code 1 
    > make: Fatal error: Command failed for target `all-recursive' 
    > Current working directory /home/jvme/bin/SN451/db > *** 
    Error code 1 > make: Fatal error: Command failed for target 
    `all-recursive-am' > Current working directory 
    /home/jvme/bin/SN451/db > *** Error code 1 > make: Fatal 
    error: Command failed for target `all-db' > 
    btm0gn:/home/jvme/bin/SN451> > > ./. > > Can 
    you help? > > > Best Regards, > > Johan 
    Vermeire

^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar  file gives a checksum error
  2000-08-18  1:30 Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error Rouviere, Stephane
@ 2000-08-18  3:04 ` Johan Vermeire WX21 54189
  2000-08-18 11:58 ` Mo DeJong
  2000-08-27 19:04 ` Ben Elliston
  2 siblings, 0 replies; 8+ messages in thread
From: Johan Vermeire WX21 54189 @ 2000-08-18  3:04 UTC (permalink / raw)
  To: Rouviere, Stephane; +Cc: Syd Polk, sourcenav, gnu

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 13891 bytes --]

Hi Stephane,
 
Thanks for your help.
I've now used GNU's tar 1.13, and all files are now extracted correctly.
Is this TAR incompatibility a SUN Solaris 2.6 or GNU problem ?
 
 
Best Regards,
Johan Vermeire
 
"Rouviere, Stephane" wrote:
  Hello, I
had the same problem with the tar: directory checksum error. It
seams to be a Sun tar problem. I
took a gnu version of tar, recompiled it under SunOS and then untar SN451.tar
with it and it works. The checksum error desappear. Hope
it will help you Stéphane  

-----Original
Message-----
From: Johan Vermeire WX21
54189 [ mailto:Johan.Vermeire@alcatel.be ]
Sent: jeudi 17 août
2000 14:12
To: Syd Polk
Cc: sourcenav@sources.redhat.com
Subject: Re: Source Navigator
4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
 
Hi Syd,
Thanks for your reply.
I've re-done the installation and I've the same problem with the configuration
of SourceNavigator 4.51
 
After unpacking the tar file:
I got at the end the following message:
....
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCascaded_Use_of_Macros.html,
3883 bytes, 8 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCombining_Source_Files.html,
8168 bytes, 16 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConcatenation.html,
6850 bytes, 14 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals.html,
4326 bytes, 9 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals_and_Macros.html,
9793 bytes, 20 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppDuplication_of_Side_Effects.html,
5804 bytes, 12 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHeader_Files.html,
2793 bytes, 6 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHow_include_Works.html,
4383 bytes, 9 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppImproperly_Nested_Constructs.html,
2880 bytes, 6 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInheritance_and_Header_Files.html,
6463 bytes, 13 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInvoking_the_C_Preprocessor.html,
35022 bytes, 69 tape blocks
tar: directory checksum error
Is the tar file complete???
The size of the Gunzipped tar file:
btm0gn:/home/jvme/bin> ls -al SN451.tar
-rw-r--r--   1 jvme     xantium 
59944960 Aug 17 13:50 SN451.tar
The contents after Configuring is:
btm0gn:/home/jvme/bin/SN451/build> ../configure --prefix=/cmx_tools/3EZ01881_SourceNavigator
Configuring for a sparc-sun-solaris2.6 host.
Created "Makefile" in /home/jvme/bin/SN451/build using "mh-frag"
Configuring db...
creating cache ../config.cache
...
...
checking for uid_t in sys/types.h... yes
checking for Tcl configuration script... configure: warning: Can't
find Tcl configuration definitions
checking for Tk configuration script... configure: warning: Can't find
Tk configuration definitions
checking for Tcl headers in the source tree... none
checking for tcl.h... no
configure: error: Can't find any Tcl headers
Configure in /home/jvme/bin/SN451/build/itcl
failed, exiting.
btm0gn:/home/jvme/bin/SN451/build> cd ..
btm0gn:/home/jvme/bin/SN451> ls -al
total 1664
drwxr-xr-x  11 jvme     xantium    
8192 Aug 17 13:57 .
drwxr-xr-x  46 jvme     xantium    
8192 Aug 17 13:52 ..
-rw-r-----   1 jvme     xantium   
18007 May  1  1998 COPYING
-rw-r-----   1 jvme     xantium   
25283 May 12  1998 COPYING.LIB
-rw-r-----   1 jvme     xantium  
208768 Jul 10 22:29 ChangeLog
-rw-r-----   1 jvme     xantium   
52710 Jul 10 22:29 Makefile.in
-rw-r-----   1 jvme     xantium    
1719 May  1  1998 README
drwxr-xr-x   5 jvme     xantium    
8192 Aug 17 14:00 build
drwxr-xr-x   3 jvme     xantium    
8192 Jul 10 23:46 config
-rw-r-----   1 jvme     xantium   
17126 Jul 10 22:29 config-ml.in
-rwxr-x---   1 jvme     xantium   
26831 Oct 10  1998 config.guess
-rw-r-----   1 jvme     xantium    
2010 Oct 19  1998 config.if
-rwxr-x---   1 jvme     xantium   
26166 Jul 10 22:29 config.sub
-rwxr-x---   1 jvme     xantium   
50317 Jul 10 22:29 configure
-rw-r-----   1 jvme     xantium   
36104 Jul 10 22:29 configure.in
drwxr-xr-x  12 jvme     xantium    
8192 Jul 10 22:29 db
drwxr-xr-x   5 jvme     xantium    
8192 Jul 10 23:46 etc
drwxr-xr-x   8 jvme     xantium    
8192 Jul 10 23:46 grep
drwxr-xr-x   2 jvme     xantium    
8192 Jul 10 23:46 include
-rwxr-x---   1 jvme     xantium    
5598 Jul 15  1998 install-sh
drwxr-xr-x   8 jvme     xantium    
8192 Jul 10 23:46 itcl
drwxr-xr-x   5 jvme     xantium    
8192 Jul 10 23:46 libgui
-rwxr-x---   1 jvme     xantium   
51498 Jul  7  1998 ltconfig
-rw-r-----   1 jvme     xantium   
75122 Jul 14  1998 ltmain.sh
-rwxr-x---   1 jvme     xantium    
6274 Jun 10  1998 missing
-rwxr-x---   1 jvme     xantium     
730 May  1  1998 mkinstalldirs
-rwxr-x---   1 jvme     xantium     
869 May  1  1998 move-if-change
-rw-r-----   1 jvme     xantium   
14898 May  1  1998 mpw-README
-rw-r-----   1 jvme     xantium    
5169 May  1  1998 mpw-build.in
-rw-r-----   1 jvme     xantium    
4742 May  1  1998 mpw-config.in
-rw-r-----   1 jvme     xantium   
14664 May  1  1998 mpw-configure
-rw-r-----   1 jvme     xantium    
3171 May  1  1998 mpw-install
drwxr-xr-x   6 jvme     xantium    
8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451> dir
drwxr-xr-x  11 jvme     xantium    
8192 Aug 17 13:57 .
drwxr-xr-x  46 jvme     xantium    
8192 Aug 17 13:52 ..
drwxr-xr-x   5 jvme     xantium    
8192 Aug 17 14:00 build
drwxr-xr-x   3 jvme     xantium    
8192 Jul 10 23:46 config
drwxr-xr-x  12 jvme     xantium    
8192 Jul 10 22:29 db
drwxr-xr-x   5 jvme     xantium    
8192 Jul 10 23:46 etc
drwxr-xr-x   8 jvme     xantium    
8192 Jul 10 23:46 grep
drwxr-xr-x   2 jvme     xantium    
8192 Jul 10 23:46 include
drwxr-xr-x   8 jvme     xantium    
8192 Jul 10 23:46 itcl
drwxr-xr-x   5 jvme     xantium    
8192 Jul 10 23:46 libgui
drwxr-xr-x   6 jvme     xantium    
8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451>
I don't see a tcl and tk directory!
 
Best Regards,
Johan
 
 
Syd Polk wrote:
You must use the tcl code provided with the Source-Navigator
package. Did you by
chance delete the tcl and tk directories after you expanded the tarball?
Johan Vermeire WX21 54189 wrote:
>
> Hi,
>
> I don't know to where I've to send SN bug (configure) reports, therefore
I
> mail to you.
> Sorry, if I'm not at the right person.
>
> ./.
>
> I started today with a first attempt to rebuild SN451 from scratch.
>
> btm0gn:/home/jvme/bin/SN451> ./configure
> --prefix=/cmx_tools/3EZ01881_SourceNavigator
> Configuring for a sparc-sun-solaris2.6 host.
> Created "Makefile" in /home/jvme/bin/SN451 using "mh-frag"
> ./config.status is unchanged
> Configuring db...
> loading cache ../config.cache
> checking for a BSD compatible install... ./install-sh -c
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... (cached) yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... missing
> checking whether to enable maintainer-specific portions of Makefiles...
no
> checking whether make sets ${MAKE}... (cached) yes
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a cross-compiler...
no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for cygwin32 environment... (cached) no
> checking for mingw32 environment... (cached) no
> checking for executable suffix... (cached) no
> checking for object suffix... (cached) o
> checking for ranlib... (cached) ranlib
> checking for false... (cached) /usr/bin/false
> checking for sh... (cached) /usr/bin/sh
> checking for sh5... (cached) /usr/bin/false
> checking for bash... (cached) /usr/bin/bash
> checking for cygwin32... (cached) no
> checking for Microsoft Visual C++... (cached) no
> checking checking for shell with functions... (cached) /usr/bin/sh
> checking for dirent.h that defines DIR... (cached) yes
> checking for opendir in -ldir... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
> checking for fcntl.h... (cached) yes
> checking for limits.h... (cached) yes
> checking for sys/time.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for ssize_t... (cached) yes
> checking for pgno_t... (cached) no
> checking whether byte ordering is bigendian... (cached) yes
> checking for working const... (cached) yes
> checking whether time.h and sys/time.h may both be included... (cached)
yes
> checking for st_blksize in struct stat... (cached) yes
> checking for mode_t... (cached) yes
> checking for off_t... (cached) yes
> checking for pid_t... (cached) yes
> checking for size_t... (cached) yes
> checking for u_char... (cached) yes
> checking for vprintf... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... (cached) yes
> checking for working mmap... (cached) yes
> checking for mkdir... (cached) yes
> checking for rmdir... (cached) yes
> checking for select... (cached) yes
> checking for memmove... (cached) yes
> checking for snprintf... (cached) yes
> checking for strerror... (cached) yes
> checking for sprintf return value... (cached) yes
> checking for int8_t... (cached) yes
> checking for u_int8_t... (cached) no
> checking for int16_t... (cached) yes
> checking for u_int16_t... (cached) no
> checking for int32_t... (cached) yes
> checking for u_int32_t... (cached) no
> checking for int64_t... (cached) yes
> checking for u_int64_t... (cached) no
> creating ./config.status
> creating Makefile
> creating PORT/Makefile
> creating config.h
> config.h is unchanged
> Configuring itcl...
> loading cache ../config.cache
> checking for a BSD compatible install... ./../install-sh -c
> checking for ranlib... (cached) ranlib
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a cross-compiler...
no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for object suffix... (cached) o
> checking for cygwin32 environment... (cached) no
> checking for mingw32 environment... (cached) no
> checking for executable suffix... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for mode_t... (cached) yes
> checking for pid_t... (cached) yes
> checking for size_t... (cached) yes
> checking for uid_t in sys/types.h... yes
> checking for Tcl configuration script... configure: warning: Can't
find Tcl
> configuration definitions
> checking for Tk configuration script... configure: warning: Can't
find Tk
> configuration definitions
> checking for Tcl headers in the source tree... none
> checking for tcl.h... no
> configure: error: Can't find any Tcl headers
> Configure in /home/jvme/bin/SN451/itcl failed, exiting.
> btm0gn:/home/jvme/bin/SN451>
>
> And the make doesn't start:
>
> btm0gn:/home/jvme/bin/SN451> make
> make  all-recursive
> Making all in PORT
> mksh: Fatal error in reader: = missing from replacement macro reference
> Current working directory /home/jvme/bin/SN451/db/PORT
> *** Error code 1
> make: Fatal error: Command failed for target `all-recursive'
> Current working directory /home/jvme/bin/SN451/db
> *** Error code 1
> make: Fatal error: Command failed for target `all-recursive-am'
> Current working directory /home/jvme/bin/SN451/db
> *** Error code 1
> make: Fatal error: Command failed for target `all-db'
> btm0gn:/home/jvme/bin/SN451>
>
> ./.
>
> Can you help?
>
>
> Best Regards,
>
> Johan Vermeire



begin:vcard 
n:Vermeire;Johan
tel;fax:+32 (0)3 2409816
tel;work:+32 (0)3 2404189
x-mozilla-html:FALSE
url: http://www.alcate.be
org:Alcatel Bell n.v.;CID - WX21 - F/A2
adr:;;F. Wellesplein 1;Antwerp;;2018;Belgium
version:2.1
email;internet:Johan.Vermeire@alcatel.be
title:Tools & Technology officer
x-mozilla-cpt:;-7528
fn:Johan Vermeire
end:vcard

^ permalink raw reply	[flat|nested] 8+ messages in thread
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
  2000-08-18  1:30 Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error Rouviere, Stephane
  2000-08-18  3:04 ` Johan Vermeire WX21 54189
@ 2000-08-18 11:58 ` Mo DeJong
  2000-08-27 19:04 ` Ben Elliston
  2 siblings, 0 replies; 8+ messages in thread
From: Mo DeJong @ 2000-08-18 11:58 UTC (permalink / raw)
  To: Rouviere, Stephane; +Cc: sourcenav

On Fri, 18 Aug 2000, Rouviere, Stephane wrote:

... Bunch of stuff in HTML format ....

Please do not post to this mailing list in HTML. You may not even
know that you are doing it. Posting in HTML makes your email
message unreadable, it is just about as bad as sending spam.
Do not let it happen again.

Mo DeJong
Red Hat Inc

^ permalink raw reply	[flat|nested] 8+ messages in thread
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar  file gives a checksum error
  2000-08-18  1:30 Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error Rouviere, Stephane
  2000-08-18  3:04 ` Johan Vermeire WX21 54189
  2000-08-18 11:58 ` Mo DeJong
@ 2000-08-27 19:04 ` Ben Elliston
  2000-08-28 11:41   ` Syd Polk
  2 siblings, 1 reply; 8+ messages in thread
From: Ben Elliston @ 2000-08-27 19:04 UTC (permalink / raw)
  To: Rouviere, Stephane
  Cc: 'Johan Vermeire WX21 54189', Syd Polk, sourcenav

   I had the same problem with the tar: directory checksum error. It
   seams to be a Sun tar problem. I took a gnu version of tar, recompiled
   it under SunOS and then untar SN451.tar with it and it works. The
   checksum error desappear.

The S-N distribution archives should not require GNU tar to unpack them.  
This is obviously a really confusing point for newcomers.  There are
compatibility options for GNU tar, mentioned in the Automake documentation
(and used by `make dist').

Ben

^ permalink raw reply	[flat|nested] 8+ messages in thread
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the  tar  file gives a checksum error
  2000-08-27 19:04 ` Ben Elliston
@ 2000-08-28 11:41   ` Syd Polk
  2000-08-28 13:06     ` Tom Tromey
  0 siblings, 1 reply; 8+ messages in thread
From: Syd Polk @ 2000-08-28 11:41 UTC (permalink / raw)
  To: Ben Elliston, Rouviere, Stephane
  Cc: 'Johan Vermeire WX21 54189', sourcenav

At 12:03 PM 8/28/00 +1000, Ben Elliston wrote:
>    I had the same problem with the tar: directory checksum error. It
>    seams to be a Sun tar problem. I took a gnu version of tar, recompiled
>    it under SunOS and then untar SN451.tar with it and it works. The
>    checksum error desappear.
>
>The S-N distribution archives should not require GNU tar to unpack them.
>This is obviously a really confusing point for newcomers.  There are
>compatibility options for GNU tar, mentioned in the Automake documentation
>(and used by `make dist').
>
>Ben

This means I now have to pack the binaries on my Solaris box and use 
/bin/tar instead of using the tar that ships with Red Hat 6.0? What a pain!


Syd Polk		spolk@redhat.com
Engineering Manager	+1 415 777 9810 x 241
Red Hat, Inc.



^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Source Navigator 4.5.1 -> Configure problem -> Unpacking   the  tar  file gives a checksum error
  2000-08-28 11:41   ` Syd Polk
@ 2000-08-28 13:06     ` Tom Tromey
  0 siblings, 0 replies; 8+ messages in thread
From: Tom Tromey @ 2000-08-28 13:06 UTC (permalink / raw)
  To: Syd Polk
  Cc: Ben Elliston, Rouviere, Stephane,
	'Johan Vermeire WX21 54189',
	sourcenav

Syd> This means I now have to pack the binaries on my Solaris box and
Syd> use /bin/tar instead of using the tar that ships with Red Hat
Syd> 6.0? What a pain!

No, you can use the `-o' option to GNU tar to make a compatible tar
archive.  GNU tar by default, in some situations, creates tar files
which are not portable.  GNU tar doesn't use the POSIX tar format in
all situations.

Tom

^ permalink raw reply	[flat|nested] 8+ messages in thread
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar   file gives a checksum error
@ 2000-08-18  4:48 Rouviere, Stephane
  0 siblings, 0 replies; 8+ messages in thread
From: Rouviere, Stephane @ 2000-08-18  4:48 UTC (permalink / raw)
  To: 'Johan Vermeire WX21 54189'; +Cc: Syd Polk, sourcenav, gnu

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 16000 bytes --]

Hi 
Johan,
 
I 
don't know where the problem come from... sorry...
I just 
had the solution ;-)
 
Stéphane

  -----Original Message----- From: Johan Vermeire WX21 54189 
  [mailto:Johan.Vermeire@alcatel.be] Sent: vendredi 18 août 2000 
  12:03 To: Rouviere, Stephane Cc: Syd Polk; 
  sourcenav@sources.redhat.com; gnu@gnu.org Subject: Re: Source 
  Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a 
  checksum error Hi Stephane,   
  Thanks for your help. 
  I've now used GNU's tar 1.13, and all files are now extracted correctly. 
  Is this TAR incompatibility a SUN Solaris 2.6 or GNU problem ? 
      
  Best Regards, 
  Johan Vermeire   
  "Rouviere, Stephane" wrote: 
    Hello, I had the same problem with the 
    tar: directory checksum error. It seams to be a Sun tar problem. I took a gnu version of tar, recompiled it under SunOS and then 
    untar SN451.tar with it and it works. The checksum error 
    desappear. Hope it will help 
    you Stéphane   
    
      -----Original Message----- From: Johan Vermeire WX21 54189 [ mailto:Johan.Vermeire@alcatel.be ] 
      Sent: jeudi 17 août 2000 
      14:12 To: Syd 
      Polk Cc: 
      sourcenav@sources.redhat.com Subject: Re: Source Navigator 4.5.1 -> Configure problem 
      -> Unpacking the tar file gives a checksum error 
        Hi Syd, 
      Thanks for your reply.
      I've re-done the installation and I've the same problem with the 
      configuration of SourceNavigator 4.51   
      After unpacking the tar file: 
      I got at the end the following message: 
      .... x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCascaded_Use_of_Macros.html, 
      3883 bytes, 8 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCombining_Source_Files.html, 
      8168 bytes, 16 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConcatenation.html, 
      6850 bytes, 14 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals.html, 
      4326 bytes, 9 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals_and_Macros.html, 
      9793 bytes, 20 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppDuplication_of_Side_Effects.html, 
      5804 bytes, 12 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHeader_Files.html, 
      2793 bytes, 6 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHow_include_Works.html, 
      4383 bytes, 9 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppImproperly_Nested_Constructs.html, 
      2880 bytes, 6 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInheritance_and_Header_Files.html, 
      6463 bytes, 13 tape blocks x 
      SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInvoking_the_C_Preprocessor.html, 
      35022 bytes, 69 tape blocks tar: directory 
      checksum error 
      Is the tar file complete??? 
      The size of the Gunzipped tar file: 
      btm0gn:/home/jvme/bin> ls -al SN451.tar -rw-r--r--   1 
      jvme     xantium  59944960 Aug 17 13:50 SN451.tar 

      The contents after Configuring is: 
      btm0gn:/home/jvme/bin/SN451/build> ../configure 
      --prefix=/cmx_tools/3EZ01881_SourceNavigator Configuring for a 
      sparc-sun-solaris2.6 host. Created "Makefile" in 
      /home/jvme/bin/SN451/build using "mh-frag" Configuring db... 
      creating cache ../config.cache ... 
      ... checking for uid_t in sys/types.h... yes checking for Tcl 
      configuration script... configure: warning: Can't find Tcl configuration 
      definitions checking for Tk configuration script... configure: 
      warning: Can't find Tk configuration definitions checking for Tcl 
      headers in the source tree... none checking for tcl.h... no configure: error: Can't find any Tcl headers 
      Configure in /home/jvme/bin/SN451/build/itcl 
      failed, exiting. 
      btm0gn:/home/jvme/bin/SN451/build> cd .. 
      btm0gn:/home/jvme/bin/SN451> ls -al total 1664 
      drwxr-xr-x  11 jvme     
      xantium     8192 Aug 17 13:57 . drwxr-xr-x  
      46 jvme     xantium     8192 Aug 
      17 13:52 .. -rw-r-----   1 jvme     
      xantium    18007 May  1  1998 COPYING 
      -rw-r-----   1 jvme     
      xantium    25283 May 12  1998 COPYING.LIB 
      -rw-r-----   1 jvme     
      xantium   208768 Jul 10 22:29 ChangeLog 
      -rw-r-----   1 jvme     
      xantium    52710 Jul 10 22:29 Makefile.in 
      -rw-r-----   1 jvme     
      xantium     1719 May  1  1998 README 
      drwxr-xr-x   5 jvme     
      xantium     8192 Aug 17 14:00 build 
      drwxr-xr-x   3 jvme     
      xantium     8192 Jul 10 23:46 config 
      -rw-r-----   1 jvme     
      xantium    17126 Jul 10 22:29 config-ml.in 
      -rwxr-x---   1 jvme     
      xantium    26831 Oct 10  1998 config.guess 
      -rw-r-----   1 jvme     
      xantium     2010 Oct 19  1998 config.if 
      -rwxr-x---   1 jvme     
      xantium    26166 Jul 10 22:29 config.sub 
      -rwxr-x---   1 jvme     
      xantium    50317 Jul 10 22:29 configure 
      -rw-r-----   1 jvme     
      xantium    36104 Jul 10 22:29 configure.in 
      drwxr-xr-x  12 jvme     
      xantium     8192 Jul 10 22:29 db 
      drwxr-xr-x   5 jvme     
      xantium     8192 Jul 10 23:46 etc 
      drwxr-xr-x   8 jvme     
      xantium     8192 Jul 10 23:46 grep 
      drwxr-xr-x   2 jvme     
      xantium     8192 Jul 10 23:46 include 
      -rwxr-x---   1 jvme     
      xantium     5598 Jul 15  1998 install-sh 
      drwxr-xr-x   8 jvme     
      xantium     8192 Jul 10 23:46 itcl 
      drwxr-xr-x   5 jvme     
      xantium     8192 Jul 10 23:46 libgui 
      -rwxr-x---   1 jvme     
      xantium    51498 Jul  7  1998 ltconfig 
      -rw-r-----   1 jvme     
      xantium    75122 Jul 14  1998 ltmain.sh 
      -rwxr-x---   1 jvme     
      xantium     6274 Jun 10  1998 missing 
      -rwxr-x---   1 jvme     
      xantium      730 May  1  1998 
      mkinstalldirs -rwxr-x---   1 jvme     
      xantium      869 May  1  1998 
      move-if-change -rw-r-----   1 jvme     
      xantium    14898 May  1  1998 mpw-README 
      -rw-r-----   1 jvme     
      xantium     5169 May  1  1998 mpw-build.in 
      -rw-r-----   1 jvme     
      xantium     4742 May  1  1998 mpw-config.in 
      -rw-r-----   1 jvme     
      xantium    14664 May  1  1998 mpw-configure 
      -rw-r-----   1 jvme     
      xantium     3171 May  1  1998 mpw-install 
      drwxr-xr-x   6 jvme     
      xantium     8192 Aug 17 13:53 snavigator 
      btm0gn:/home/jvme/bin/SN451> dir drwxr-xr-x  11 
      jvme     xantium     8192 Aug 17 
      13:57 . drwxr-xr-x  46 jvme     
      xantium     8192 Aug 17 13:52 .. 
      drwxr-xr-x   5 jvme     
      xantium     8192 Aug 17 14:00 build 
      drwxr-xr-x   3 jvme     
      xantium     8192 Jul 10 23:46 config 
      drwxr-xr-x  12 jvme     
      xantium     8192 Jul 10 22:29 db 
      drwxr-xr-x   5 jvme     
      xantium     8192 Jul 10 23:46 etc 
      drwxr-xr-x   8 jvme     
      xantium     8192 Jul 10 23:46 grep 
      drwxr-xr-x   2 jvme     
      xantium     8192 Jul 10 23:46 include 
      drwxr-xr-x   8 jvme     
      xantium     8192 Jul 10 23:46 itcl 
      drwxr-xr-x   5 jvme     
      xantium     8192 Jul 10 23:46 libgui 
      drwxr-xr-x   6 jvme     
      xantium     8192 Aug 17 13:53 snavigator 
      btm0gn:/home/jvme/bin/SN451> 
      I don't see a tcl and tk directory! 
        
      Best Regards, 
      Johan     
      Syd Polk wrote: 
      You must use the tcl code provided with the 
        Source-Navigator package. Did you by chance delete the tcl and tk 
        directories after you expanded the tarball? 
        Johan Vermeire WX21 54189 wrote: > > Hi, > 
        > I don't know to where I've to send SN bug (configure) reports, 
        therefore I > mail to you. > Sorry, if I'm not at the 
        right person. > > ./. > > I started today 
        with a first attempt to rebuild SN451 from scratch. > > 
        btm0gn:/home/jvme/bin/SN451> ./configure > 
        --prefix=/cmx_tools/3EZ01881_SourceNavigator > Configuring for a 
        sparc-sun-solaris2.6 host. > Created "Makefile" in 
        /home/jvme/bin/SN451 using "mh-frag" > ./config.status is 
        unchanged > Configuring db... > loading cache 
        ../config.cache > checking for a BSD compatible install... 
        ./install-sh -c > checking whether build environment is sane... 
        yes > checking whether make sets ${MAKE}... (cached) yes > 
        checking for working aclocal... missing > checking for working 
        autoconf... missing > checking for working automake... missing 
        > checking for working autoheader... missing > checking 
        for working makeinfo... missing > checking whether to enable 
        maintainer-specific portions of Makefiles... no > checking 
        whether make sets ${MAKE}... (cached) yes > checking for gcc... 
        (cached) gcc > checking whether the C compiler (gcc -g -O2 ) 
        works... yes > checking whether the C compiler (gcc -g -O2 ) is a 
        cross-compiler... no > checking whether we are using GNU C... 
        (cached) yes > checking whether gcc accepts -g... (cached) yes 
        > checking how to run the C preprocessor... (cached) gcc -E 
        > checking for cygwin32 environment... (cached) no > 
        checking for mingw32 environment... (cached) no > checking for 
        executable suffix... (cached) no > checking for object suffix... 
        (cached) o > checking for ranlib... (cached) ranlib > 
        checking for false... (cached) /usr/bin/false > checking for 
        sh... (cached) /usr/bin/sh > checking for sh5... (cached) 
        /usr/bin/false > checking for bash... (cached) /usr/bin/bash 
        > checking for cygwin32... (cached) no > checking for 
        Microsoft Visual C++... (cached) no > checking checking for shell 
        with functions... (cached) /usr/bin/sh > checking for dirent.h 
        that defines DIR... (cached) yes > checking for opendir in 
        -ldir... (cached) no > checking for ANSI C header files... 
        (cached) yes > checking for sys/wait.h that is POSIX.1 
        compatible... (cached) yes > checking for fcntl.h... (cached) yes 
        > checking for limits.h... (cached) yes > checking for 
        sys/time.h... (cached) yes > checking for unistd.h... (cached) 
        yes > checking for ssize_t... (cached) yes > checking for 
        pgno_t... (cached) no > checking whether byte ordering is 
        bigendian... (cached) yes > checking for working const... 
        (cached) yes > checking whether time.h and sys/time.h may both be 
        included... (cached) yes > checking for st_blksize in struct 
        stat... (cached) yes > checking for mode_t... (cached) yes 
        > checking for off_t... (cached) yes > checking for 
        pid_t... (cached) yes > checking for size_t... (cached) yes 
        > checking for u_char... (cached) yes > checking for 
        vprintf... (cached) yes > checking for unistd.h... (cached) yes 
        > checking for getpagesize... (cached) yes > checking for 
        working mmap... (cached) yes > checking for mkdir... (cached) yes 
        > checking for rmdir... (cached) yes > checking for 
        select... (cached) yes > checking for memmove... (cached) yes 
        > checking for snprintf... (cached) yes > checking for 
        strerror... (cached) yes > checking for sprintf return value... 
        (cached) yes > checking for int8_t... (cached) yes > 
        checking for u_int8_t... (cached) no > checking for int16_t... 
        (cached) yes > checking for u_int16_t... (cached) no > 
        checking for int32_t... (cached) yes > checking for u_int32_t... 
        (cached) no > checking for int64_t... (cached) yes > 
        checking for u_int64_t... (cached) no > creating ./config.status 
        > creating Makefile > creating PORT/Makefile > 
        creating config.h > config.h is unchanged > Configuring 
        itcl... > loading cache ../config.cache > checking for a 
        BSD compatible install... ./../install-sh -c > checking for 
        ranlib... (cached) ranlib > checking for gcc... (cached) gcc 
        > checking whether the C compiler (gcc -g -O2 ) works... yes 
        > checking whether the C compiler (gcc -g -O2 ) is a 
        cross-compiler... no > checking whether we are using GNU C... 
        (cached) yes > checking whether gcc accepts -g... (cached) yes 
        > checking how to run the C preprocessor... (cached) gcc -E 
        > checking for object suffix... (cached) o > checking for 
        cygwin32 environment... (cached) no > checking for mingw32 
        environment... (cached) no > checking for executable suffix... 
        (cached) no > checking for ANSI C header files... (cached) yes 
        > checking for mode_t... (cached) yes > checking for 
        pid_t... (cached) yes > checking for size_t... (cached) yes 
        > checking for uid_t in sys/types.h... yes > checking for 
        Tcl configuration script... configure: warning: Can't find Tcl > 
        configuration definitions > checking for Tk configuration 
        script... configure: warning: Can't find Tk > configuration 
        definitions > checking for Tcl headers in the source tree... none 
        > checking for tcl.h... no > configure: error: Can't find 
        any Tcl headers > Configure in /home/jvme/bin/SN451/itcl failed, 
        exiting. > btm0gn:/home/jvme/bin/SN451> > > And 
        the make doesn't start: > > 
        btm0gn:/home/jvme/bin/SN451> make > make  all-recursive 
        > Making all in PORT > mksh: Fatal error in reader: = 
        missing from replacement macro reference > Current working 
        directory /home/jvme/bin/SN451/db/PORT > *** Error code 1 
        > make: Fatal error: Command failed for target `all-recursive' 
        > Current working directory /home/jvme/bin/SN451/db > *** 
        Error code 1 > make: Fatal error: Command failed for target 
        `all-recursive-am' > Current working directory 
        /home/jvme/bin/SN451/db > *** Error code 1 > make: Fatal 
        error: Command failed for target `all-db' > 
        btm0gn:/home/jvme/bin/SN451> > > ./. > > 
        Can you help? > > > Best Regards, > > 
        Johan 
Vermeire

^ permalink raw reply	[flat|nested] 8+ messages in thread
* Re: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
  2000-08-16  8:30 ` Syd Polk
@ 2000-08-17  5:12   ` Johan Vermeire WX21 54189
  0 siblings, 0 replies; 8+ messages in thread
From: Johan Vermeire WX21 54189 @ 2000-08-17  5:12 UTC (permalink / raw)
  To: Syd Polk; +Cc: sourcenav

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 13070 bytes --]

Hi Syd,
Thanks for your reply.
I've re-done the installation and I've the same problem with the configuration
of SourceNavigator 4.51
 
After unpacking the tar file:
I got at the end the following message:
....
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCascaded_Use_of_Macros.html,
3883 bytes, 8 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCombining_Source_Files.html,
8168 bytes, 16 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConcatenation.html,
6850 bytes, 14 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals.html,
4326 bytes, 9 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals_and_Macros.html,
9793 bytes, 20 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppDuplication_of_Side_Effects.html,
5804 bytes, 12 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHeader_Files.html,
2793 bytes, 6 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHow_include_Works.html,
4383 bytes, 9 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppImproperly_Nested_Constructs.html,
2880 bytes, 6 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInheritance_and_Header_Files.html,
6463 bytes, 13 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInvoking_the_C_Preprocessor.html,
35022 bytes, 69 tape blocks
tar: directory checksum error
Is the tar file complete???
The size of the Gunzipped tar file:
btm0gn:/home/jvme/bin> ls -al SN451.tar
-rw-r--r--   1 jvme     xantium 
59944960 Aug 17 13:50 SN451.tar
The contents after Configuring is:
btm0gn:/home/jvme/bin/SN451/build> ../configure --prefix=/cmx_tools/3EZ01881_SourceNavigator
Configuring for a sparc-sun-solaris2.6 host.
Created "Makefile" in /home/jvme/bin/SN451/build using "mh-frag"
Configuring db...
creating cache ../config.cache
...
...
checking for uid_t in sys/types.h... yes
checking for Tcl configuration script... configure: warning: Can't
find Tcl configuration definitions
checking for Tk configuration script... configure: warning: Can't find
Tk configuration definitions
checking for Tcl headers in the source tree... none
checking for tcl.h... no
configure: error: Can't find any Tcl headers
Configure in /home/jvme/bin/SN451/build/itcl
failed, exiting.
btm0gn:/home/jvme/bin/SN451/build> cd ..
btm0gn:/home/jvme/bin/SN451> ls -al
total 1664
drwxr-xr-x  11 jvme     xantium    
8192 Aug 17 13:57 .
drwxr-xr-x  46 jvme     xantium    
8192 Aug 17 13:52 ..
-rw-r-----   1 jvme     xantium   
18007 May  1  1998 COPYING
-rw-r-----   1 jvme     xantium   
25283 May 12  1998 COPYING.LIB
-rw-r-----   1 jvme     xantium  
208768 Jul 10 22:29 ChangeLog
-rw-r-----   1 jvme     xantium   
52710 Jul 10 22:29 Makefile.in
-rw-r-----   1 jvme     xantium    
1719 May  1  1998 README
drwxr-xr-x   5 jvme     xantium    
8192 Aug 17 14:00 build
drwxr-xr-x   3 jvme     xantium    
8192 Jul 10 23:46 config
-rw-r-----   1 jvme     xantium   
17126 Jul 10 22:29 config-ml.in
-rwxr-x---   1 jvme     xantium   
26831 Oct 10  1998 config.guess
-rw-r-----   1 jvme     xantium    
2010 Oct 19  1998 config.if
-rwxr-x---   1 jvme     xantium   
26166 Jul 10 22:29 config.sub
-rwxr-x---   1 jvme     xantium   
50317 Jul 10 22:29 configure
-rw-r-----   1 jvme     xantium   
36104 Jul 10 22:29 configure.in
drwxr-xr-x  12 jvme     xantium    
8192 Jul 10 22:29 db
drwxr-xr-x   5 jvme     xantium    
8192 Jul 10 23:46 etc
drwxr-xr-x   8 jvme     xantium    
8192 Jul 10 23:46 grep
drwxr-xr-x   2 jvme     xantium    
8192 Jul 10 23:46 include
-rwxr-x---   1 jvme     xantium    
5598 Jul 15  1998 install-sh
drwxr-xr-x   8 jvme     xantium    
8192 Jul 10 23:46 itcl
drwxr-xr-x   5 jvme     xantium    
8192 Jul 10 23:46 libgui
-rwxr-x---   1 jvme     xantium   
51498 Jul  7  1998 ltconfig
-rw-r-----   1 jvme     xantium   
75122 Jul 14  1998 ltmain.sh
-rwxr-x---   1 jvme     xantium    
6274 Jun 10  1998 missing
-rwxr-x---   1 jvme     xantium     
730 May  1  1998 mkinstalldirs
-rwxr-x---   1 jvme     xantium     
869 May  1  1998 move-if-change
-rw-r-----   1 jvme     xantium   
14898 May  1  1998 mpw-README
-rw-r-----   1 jvme     xantium    
5169 May  1  1998 mpw-build.in
-rw-r-----   1 jvme     xantium    
4742 May  1  1998 mpw-config.in
-rw-r-----   1 jvme     xantium   
14664 May  1  1998 mpw-configure
-rw-r-----   1 jvme     xantium    
3171 May  1  1998 mpw-install
drwxr-xr-x   6 jvme     xantium    
8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451> dir
drwxr-xr-x  11 jvme     xantium    
8192 Aug 17 13:57 .
drwxr-xr-x  46 jvme     xantium    
8192 Aug 17 13:52 ..
drwxr-xr-x   5 jvme     xantium    
8192 Aug 17 14:00 build
drwxr-xr-x   3 jvme     xantium    
8192 Jul 10 23:46 config
drwxr-xr-x  12 jvme     xantium    
8192 Jul 10 22:29 db
drwxr-xr-x   5 jvme     xantium    
8192 Jul 10 23:46 etc
drwxr-xr-x   8 jvme     xantium    
8192 Jul 10 23:46 grep
drwxr-xr-x   2 jvme     xantium    
8192 Jul 10 23:46 include
drwxr-xr-x   8 jvme     xantium    
8192 Jul 10 23:46 itcl
drwxr-xr-x   5 jvme     xantium    
8192 Jul 10 23:46 libgui
drwxr-xr-x   6 jvme     xantium    
8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451>
I don't see a tcl and tk directory!
 
Best Regards,
Johan
 
 
Syd Polk wrote:
You must use the tcl code provided with the Source-Navigator
package. Did you by
chance delete the tcl and tk directories after you expanded the tarball?
Johan Vermeire WX21 54189 wrote:
>
> Hi,
>
> I don't know to where I've to send SN bug (configure) reports, therefore
I
> mail to you.
> Sorry, if I'm not at the right person.
>
> ./.
>
> I started today with a first attempt to rebuild SN451 from scratch.
>
> btm0gn:/home/jvme/bin/SN451> ./configure
> --prefix=/cmx_tools/3EZ01881_SourceNavigator
> Configuring for a sparc-sun-solaris2.6 host.
> Created "Makefile" in /home/jvme/bin/SN451 using "mh-frag"
> ./config.status is unchanged
> Configuring db...
> loading cache ../config.cache
> checking for a BSD compatible install... ./install-sh -c
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... (cached) yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... missing
> checking whether to enable maintainer-specific portions of Makefiles...
no
> checking whether make sets ${MAKE}... (cached) yes
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a cross-compiler...
no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for cygwin32 environment... (cached) no
> checking for mingw32 environment... (cached) no
> checking for executable suffix... (cached) no
> checking for object suffix... (cached) o
> checking for ranlib... (cached) ranlib
> checking for false... (cached) /usr/bin/false
> checking for sh... (cached) /usr/bin/sh
> checking for sh5... (cached) /usr/bin/false
> checking for bash... (cached) /usr/bin/bash
> checking for cygwin32... (cached) no
> checking for Microsoft Visual C++... (cached) no
> checking checking for shell with functions... (cached) /usr/bin/sh
> checking for dirent.h that defines DIR... (cached) yes
> checking for opendir in -ldir... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
> checking for fcntl.h... (cached) yes
> checking for limits.h... (cached) yes
> checking for sys/time.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for ssize_t... (cached) yes
> checking for pgno_t... (cached) no
> checking whether byte ordering is bigendian... (cached) yes
> checking for working const... (cached) yes
> checking whether time.h and sys/time.h may both be included... (cached)
yes
> checking for st_blksize in struct stat... (cached) yes
> checking for mode_t... (cached) yes
> checking for off_t... (cached) yes
> checking for pid_t... (cached) yes
> checking for size_t... (cached) yes
> checking for u_char... (cached) yes
> checking for vprintf... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... (cached) yes
> checking for working mmap... (cached) yes
> checking for mkdir... (cached) yes
> checking for rmdir... (cached) yes
> checking for select... (cached) yes
> checking for memmove... (cached) yes
> checking for snprintf... (cached) yes
> checking for strerror... (cached) yes
> checking for sprintf return value... (cached) yes
> checking for int8_t... (cached) yes
> checking for u_int8_t... (cached) no
> checking for int16_t... (cached) yes
> checking for u_int16_t... (cached) no
> checking for int32_t... (cached) yes
> checking for u_int32_t... (cached) no
> checking for int64_t... (cached) yes
> checking for u_int64_t... (cached) no
> creating ./config.status
> creating Makefile
> creating PORT/Makefile
> creating config.h
> config.h is unchanged
> Configuring itcl...
> loading cache ../config.cache
> checking for a BSD compatible install... ./../install-sh -c
> checking for ranlib... (cached) ranlib
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a cross-compiler...
no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for object suffix... (cached) o
> checking for cygwin32 environment... (cached) no
> checking for mingw32 environment... (cached) no
> checking for executable suffix... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for mode_t... (cached) yes
> checking for pid_t... (cached) yes
> checking for size_t... (cached) yes
> checking for uid_t in sys/types.h... yes
> checking for Tcl configuration script... configure: warning: Can't
find Tcl
> configuration definitions
> checking for Tk configuration script... configure: warning: Can't
find Tk
> configuration definitions
> checking for Tcl headers in the source tree... none
> checking for tcl.h... no
> configure: error: Can't find any Tcl headers
> Configure in /home/jvme/bin/SN451/itcl failed, exiting.
> btm0gn:/home/jvme/bin/SN451>
>
> And the make doesn't start:
>
> btm0gn:/home/jvme/bin/SN451> make
> make  all-recursive
> Making all in PORT
> mksh: Fatal error in reader: = missing from replacement macro reference
> Current working directory /home/jvme/bin/SN451/db/PORT
> *** Error code 1
> make: Fatal error: Command failed for target `all-recursive'
> Current working directory /home/jvme/bin/SN451/db
> *** Error code 1
> make: Fatal error: Command failed for target `all-recursive-am'
> Current working directory /home/jvme/bin/SN451/db
> *** Error code 1
> make: Fatal error: Command failed for target `all-db'
> btm0gn:/home/jvme/bin/SN451>
>
> ./.
>
> Can you help?
>
>
> Best Regards,
>
> Johan Vermeire

begin:vcard 
n:Vermeire;Johan
tel;fax:+32 (0)3 2409816
tel;work:+32 (0)3 2404189
x-mozilla-html:FALSE
url: http://www.alcate.be
org:Alcatel Bell n.v.;CID - WX21 - F/A2
adr:;;F. Wellesplein 1;Antwerp;;2018;Belgium
version:2.1
email;internet:Johan.Vermeire@alcatel.be
title:Tools & Technology officer
x-mozilla-cpt:;-7528
fn:Johan Vermeire
end:vcard

^ permalink raw reply	[flat|nested] 8+ messages in thread
end of thread, other threads:[~2000-08-28 13:06 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-08-18  1:30 Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error Rouviere, Stephane
2000-08-18  3:04 ` Johan Vermeire WX21 54189
2000-08-18 11:58 ` Mo DeJong
2000-08-27 19:04 ` Ben Elliston
2000-08-28 11:41   ` Syd Polk
2000-08-28 13:06     ` Tom Tromey
  -- strict thread matches above, loose matches on Subject: below --
2000-08-18  4:48 Rouviere, Stephane
2000-08-15 23:52 Source Navigator 4.5.1 -> Configure problem Johan Vermeire WX21 54189
2000-08-16  8:30 ` Syd Polk
2000-08-17  5:12   ` Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error Johan Vermeire WX21 54189

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).