* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
@ 2000-08-18 4:48 Rouviere, Stephane
0 siblings, 0 replies; 8+ messages in thread
From: Rouviere, Stephane @ 2000-08-18 4:48 UTC (permalink / raw)
To: 'Johan Vermeire WX21 54189'; +Cc: Syd Polk, sourcenav, gnu
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 16000 bytes --]
Hi
Johan,
Â
I
don't know where the problem come from... sorry...
I just
had the solution ;-)
Â
Stéphane
-----Original Message----- From: Johan Vermeire WX21 54189
[mailto:Johan.Vermeire@alcatel.be] Sent: vendredi 18 août 2000
12:03 To: Rouviere, Stephane Cc: Syd Polk;
sourcenav@sources.redhat.com; gnu@gnu.org Subject: Re: Source
Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a
checksum error Hi Stephane, Â
Thanks for your help.
I've now used GNU's tar 1.13, and all files are now extracted correctly.
Is this TARÂ incompatibility a SUN Solaris 2.6 or GNU problem ?
 Â
Best Regards,
Johan Vermeire Â
"Rouviere, Stephane" wrote:
 Hello, I had the same problem with the
tar: directory checksum error. It seams to be a Sun tar problem. I took a gnu version of tar, recompiled it under SunOS and then
untar SN451.tar with it and it works. The checksum error
desappear. Hope it will help
you Stéphane Â
-----Original Message----- From: Johan Vermeire WX21 54189 [ mailto:Johan.Vermeire@alcatel.be ]
Sent: jeudi 17 août 2000
14:12 To: Syd
Polk Cc:
sourcenav@sources.redhat.com Subject: Re: Source Navigator 4.5.1 -> Configure problem
-> Unpacking the tar file gives a checksum error
 Hi Syd,
Thanks for your reply.
I've re-done the installation and I've the same problem with the
configuration of SourceNavigator 4.51 Â
After unpacking the tar file:
I got at the end the following message:
.... x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCascaded_Use_of_Macros.html,
3883 bytes, 8 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCombining_Source_Files.html,
8168 bytes, 16 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConcatenation.html,
6850 bytes, 14 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals.html,
4326 bytes, 9 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals_and_Macros.html,
9793 bytes, 20 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppDuplication_of_Side_Effects.html,
5804 bytes, 12 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHeader_Files.html,
2793 bytes, 6 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHow_include_Works.html,
4383 bytes, 9 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppImproperly_Nested_Constructs.html,
2880 bytes, 6 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInheritance_and_Header_Files.html,
6463 bytes, 13 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInvoking_the_C_Preprocessor.html,
35022 bytes, 69 tape blocks tar: directory
checksum error
Is the tar file complete???
The size of the Gunzipped tar file:
btm0gn:/home/jvme/bin> ls -al SN451.tar -rw-r--r--Â Â 1
jvme    xantium 59944960 Aug 17 13:50 SN451.tar
The contents after Configuring is:
btm0gn:/home/jvme/bin/SN451/build> ../configure
--prefix=/cmx_tools/3EZ01881_SourceNavigator Configuring for a
sparc-sun-solaris2.6 host. Created "Makefile" in
/home/jvme/bin/SN451/build using "mh-frag" Configuring db...
creating cache ../config.cache ...
... checking for uid_t in sys/types.h... yes checking for Tcl
configuration script... configure: warning: Can't find Tcl configuration
definitions checking for Tk configuration script... configure:
warning: Can't find Tk configuration definitions checking for Tcl
headers in the source tree... none checking for tcl.h... no configure: error: Can't find any Tcl headers
Configure in /home/jvme/bin/SN451/build/itcl
failed, exiting.
btm0gn:/home/jvme/bin/SN451/build> cd ..
btm0gn:/home/jvme/bin/SN451> ls -al total 1664
drwxr-xr-x 11 jvme   Â
xantium    8192 Aug 17 13:57 . drwxr-xr-xÂ
46 jvme    xantium    8192 Aug
17 13:52 .. -rw-r-----  1 jvme   Â
xantium   18007 May 1 1998 COPYING
-rw-r-----  1 jvme   Â
xantium   25283 May 12 1998 COPYING.LIB
-rw-r-----  1 jvme   Â
xantium  208768 Jul 10 22:29 ChangeLog
-rw-r-----  1 jvme   Â
xantium   52710 Jul 10 22:29 Makefile.in
-rw-r-----  1 jvme   Â
xantium    1719 May 1 1998 README
drwxr-xr-x  5 jvme   Â
xantium    8192 Aug 17 14:00 build
drwxr-xr-x  3 jvme   Â
xantium    8192 Jul 10 23:46 config
-rw-r-----  1 jvme   Â
xantium   17126 Jul 10 22:29 config-ml.in
-rwxr-x---  1 jvme   Â
xantium   26831 Oct 10 1998 config.guess
-rw-r-----  1 jvme   Â
xantium    2010 Oct 19 1998 config.if
-rwxr-x---  1 jvme   Â
xantium   26166 Jul 10 22:29 config.sub
-rwxr-x---  1 jvme   Â
xantium   50317 Jul 10 22:29 configure
-rw-r-----  1 jvme   Â
xantium   36104 Jul 10 22:29 configure.in
drwxr-xr-x 12 jvme   Â
xantium    8192 Jul 10 22:29 db
drwxr-xr-x  5 jvme   Â
xantium    8192 Jul 10 23:46 etc
drwxr-xr-x  8 jvme   Â
xantium    8192 Jul 10 23:46 grep
drwxr-xr-x  2 jvme   Â
xantium    8192 Jul 10 23:46 include
-rwxr-x---  1 jvme   Â
xantium    5598 Jul 15 1998 install-sh
drwxr-xr-x  8 jvme   Â
xantium    8192 Jul 10 23:46 itcl
drwxr-xr-x  5 jvme   Â
xantium    8192 Jul 10 23:46 libgui
-rwxr-x---  1 jvme   Â
xantium   51498 Jul 7 1998 ltconfig
-rw-r-----  1 jvme   Â
xantium   75122 Jul 14 1998 ltmain.sh
-rwxr-x---  1 jvme   Â
xantium    6274 Jun 10 1998 missing
-rwxr-x---  1 jvme   Â
xantium     730 May 1 1998
mkinstalldirs -rwxr-x---  1 jvme   Â
xantium     869 May 1 1998
move-if-change -rw-r-----  1 jvme   Â
xantium   14898 May 1 1998 mpw-README
-rw-r-----  1 jvme   Â
xantium    5169 May 1 1998 mpw-build.in
-rw-r-----  1 jvme   Â
xantium    4742 May 1 1998 mpw-config.in
-rw-r-----  1 jvme   Â
xantium   14664 May 1 1998 mpw-configure
-rw-r-----  1 jvme   Â
xantium    3171 May 1 1998 mpw-install
drwxr-xr-x  6 jvme   Â
xantium    8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451> dir drwxr-xr-x 11
jvme    xantium    8192 Aug 17
13:57 . drwxr-xr-x 46 jvme   Â
xantium    8192 Aug 17 13:52 ..
drwxr-xr-x  5 jvme   Â
xantium    8192 Aug 17 14:00 build
drwxr-xr-x  3 jvme   Â
xantium    8192 Jul 10 23:46 config
drwxr-xr-x 12 jvme   Â
xantium    8192 Jul 10 22:29 db
drwxr-xr-x  5 jvme   Â
xantium    8192 Jul 10 23:46 etc
drwxr-xr-x  8 jvme   Â
xantium    8192 Jul 10 23:46 grep
drwxr-xr-x  2 jvme   Â
xantium    8192 Jul 10 23:46 include
drwxr-xr-x  8 jvme   Â
xantium    8192 Jul 10 23:46 itcl
drwxr-xr-x  5 jvme   Â
xantium    8192 Jul 10 23:46 libgui
drwxr-xr-x  6 jvme   Â
xantium    8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451>
I don't see a tcl and tk directory!
Â
Best Regards,
Johan  Â
Syd Polk wrote:
You must use the tcl code provided with the
Source-Navigator package. Did you by chance delete the tcl and tk
directories after you expanded the tarball?
Johan Vermeire WX21 54189 wrote: > > Hi, >
> I don't know to where I've to send SN bug (configure) reports,
therefore I > mail to you. > Sorry, if I'm not at the
right person. > > ./. > > I started today
with a first attempt to rebuild SN451 from scratch. > >
btm0gn:/home/jvme/bin/SN451> ./configure >
--prefix=/cmx_tools/3EZ01881_SourceNavigator > Configuring for a
sparc-sun-solaris2.6 host. > Created "Makefile" in
/home/jvme/bin/SN451 using "mh-frag" > ./config.status is
unchanged > Configuring db... > loading cache
../config.cache > checking for a BSD compatible install...
./install-sh -c > checking whether build environment is sane...
yes > checking whether make sets ${MAKE}... (cached) yes >
checking for working aclocal... missing > checking for working
autoconf... missing > checking for working automake... missing
> checking for working autoheader... missing > checking
for working makeinfo... missing > checking whether to enable
maintainer-specific portions of Makefiles... no > checking
whether make sets ${MAKE}... (cached) yes > checking for gcc...
(cached) gcc > checking whether the C compiler (gcc -g -O2 )
works... yes > checking whether the C compiler (gcc -g -O2 ) is a
cross-compiler... no > checking whether we are using GNU C...
(cached) yes > checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for cygwin32 environment... (cached) no >
checking for mingw32 environment... (cached) no > checking for
executable suffix... (cached) no > checking for object suffix...
(cached) o > checking for ranlib... (cached) ranlib >
checking for false... (cached) /usr/bin/false > checking for
sh... (cached) /usr/bin/sh > checking for sh5... (cached)
/usr/bin/false > checking for bash... (cached) /usr/bin/bash
> checking for cygwin32... (cached) no > checking for
Microsoft Visual C++... (cached) no > checking checking for shell
with functions... (cached) /usr/bin/sh > checking for dirent.h
that defines DIR... (cached) yes > checking for opendir in
-ldir... (cached) no > checking for ANSI C header files...
(cached) yes > checking for sys/wait.h that is POSIX.1
compatible... (cached) yes > checking for fcntl.h... (cached) yes
> checking for limits.h... (cached) yes > checking for
sys/time.h... (cached) yes > checking for unistd.h... (cached)
yes > checking for ssize_t... (cached) yes > checking for
pgno_t... (cached) no > checking whether byte ordering is
bigendian... (cached) yes > checking for working const...
(cached) yes > checking whether time.h and sys/time.h may both be
included... (cached) yes > checking for st_blksize in struct
stat... (cached) yes > checking for mode_t... (cached) yes
> checking for off_t... (cached) yes > checking for
pid_t... (cached) yes > checking for size_t... (cached) yes
> checking for u_char... (cached) yes > checking for
vprintf... (cached) yes > checking for unistd.h... (cached) yes
> checking for getpagesize... (cached) yes > checking for
working mmap... (cached) yes > checking for mkdir... (cached) yes
> checking for rmdir... (cached) yes > checking for
select... (cached) yes > checking for memmove... (cached) yes
> checking for snprintf... (cached) yes > checking for
strerror... (cached) yes > checking for sprintf return value...
(cached) yes > checking for int8_t... (cached) yes >
checking for u_int8_t... (cached) no > checking for int16_t...
(cached) yes > checking for u_int16_t... (cached) no >
checking for int32_t... (cached) yes > checking for u_int32_t...
(cached) no > checking for int64_t... (cached) yes >
checking for u_int64_t... (cached) no > creating ./config.status
> creating Makefile > creating PORT/Makefile >
creating config.h > config.h is unchanged > Configuring
itcl... > loading cache ../config.cache > checking for a
BSD compatible install... ./../install-sh -c > checking for
ranlib... (cached) ranlib > checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a
cross-compiler... no > checking whether we are using GNU C...
(cached) yes > checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for object suffix... (cached) o > checking for
cygwin32 environment... (cached) no > checking for mingw32
environment... (cached) no > checking for executable suffix...
(cached) no > checking for ANSI C header files... (cached) yes
> checking for mode_t... (cached) yes > checking for
pid_t... (cached) yes > checking for size_t... (cached) yes
> checking for uid_t in sys/types.h... yes > checking for
Tcl configuration script... configure: warning: Can't find Tcl >
configuration definitions > checking for Tk configuration
script... configure: warning: Can't find Tk > configuration
definitions > checking for Tcl headers in the source tree... none
> checking for tcl.h... no > configure: error: Can't find
any Tcl headers > Configure in /home/jvme/bin/SN451/itcl failed,
exiting. > btm0gn:/home/jvme/bin/SN451> > > And
the make doesn't start: > >
btm0gn:/home/jvme/bin/SN451> make > make all-recursive
> Making all in PORT > mksh: Fatal error in reader: =
missing from replacement macro reference > Current working
directory /home/jvme/bin/SN451/db/PORT > *** Error code 1
> make: Fatal error: Command failed for target `all-recursive'
> Current working directory /home/jvme/bin/SN451/db > ***
Error code 1 > make: Fatal error: Command failed for target
`all-recursive-am' > Current working directory
/home/jvme/bin/SN451/db > *** Error code 1 > make: Fatal
error: Command failed for target `all-db' >
btm0gn:/home/jvme/bin/SN451> > > ./. > >
Can you help? > > > Best Regards, > >
Johan
Vermeire
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
2000-08-28 11:41 ` Syd Polk
@ 2000-08-28 13:06 ` Tom Tromey
0 siblings, 0 replies; 8+ messages in thread
From: Tom Tromey @ 2000-08-28 13:06 UTC (permalink / raw)
To: Syd Polk
Cc: Ben Elliston, Rouviere, Stephane,
'Johan Vermeire WX21 54189',
sourcenav
Syd> This means I now have to pack the binaries on my Solaris box and
Syd> use /bin/tar instead of using the tar that ships with Red Hat
Syd> 6.0? What a pain!
No, you can use the `-o' option to GNU tar to make a compatible tar
archive. GNU tar by default, in some situations, creates tar files
which are not portable. GNU tar doesn't use the POSIX tar format in
all situations.
Tom
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
2000-08-27 19:04 ` Ben Elliston
@ 2000-08-28 11:41 ` Syd Polk
2000-08-28 13:06 ` Tom Tromey
0 siblings, 1 reply; 8+ messages in thread
From: Syd Polk @ 2000-08-28 11:41 UTC (permalink / raw)
To: Ben Elliston, Rouviere, Stephane
Cc: 'Johan Vermeire WX21 54189', sourcenav
At 12:03 PM 8/28/00 +1000, Ben Elliston wrote:
> I had the same problem with the tar: directory checksum error. It
> seams to be a Sun tar problem. I took a gnu version of tar, recompiled
> it under SunOS and then untar SN451.tar with it and it works. The
> checksum error desappear.
>
>The S-N distribution archives should not require GNU tar to unpack them.
>This is obviously a really confusing point for newcomers. There are
>compatibility options for GNU tar, mentioned in the Automake documentation
>(and used by `make dist').
>
>Ben
This means I now have to pack the binaries on my Solaris box and use
/bin/tar instead of using the tar that ships with Red Hat 6.0? What a pain!
Syd Polk spolk@redhat.com
Engineering Manager +1 415 777 9810 x 241
Red Hat, Inc.
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
2000-08-18 1:30 Rouviere, Stephane
2000-08-18 3:04 ` Johan Vermeire WX21 54189
2000-08-18 11:58 ` Mo DeJong
@ 2000-08-27 19:04 ` Ben Elliston
2000-08-28 11:41 ` Syd Polk
2 siblings, 1 reply; 8+ messages in thread
From: Ben Elliston @ 2000-08-27 19:04 UTC (permalink / raw)
To: Rouviere, Stephane
Cc: 'Johan Vermeire WX21 54189', Syd Polk, sourcenav
I had the same problem with the tar: directory checksum error. It
seams to be a Sun tar problem. I took a gnu version of tar, recompiled
it under SunOS and then untar SN451.tar with it and it works. The
checksum error desappear.
The S-N distribution archives should not require GNU tar to unpack them.
This is obviously a really confusing point for newcomers. There are
compatibility options for GNU tar, mentioned in the Automake documentation
(and used by `make dist').
Ben
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
2000-08-18 1:30 Rouviere, Stephane
2000-08-18 3:04 ` Johan Vermeire WX21 54189
@ 2000-08-18 11:58 ` Mo DeJong
2000-08-27 19:04 ` Ben Elliston
2 siblings, 0 replies; 8+ messages in thread
From: Mo DeJong @ 2000-08-18 11:58 UTC (permalink / raw)
To: Rouviere, Stephane; +Cc: sourcenav
On Fri, 18 Aug 2000, Rouviere, Stephane wrote:
... Bunch of stuff in HTML format ....
Please do not post to this mailing list in HTML. You may not even
know that you are doing it. Posting in HTML makes your email
message unreadable, it is just about as bad as sending spam.
Do not let it happen again.
Mo DeJong
Red Hat Inc
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
2000-08-18 1:30 Rouviere, Stephane
@ 2000-08-18 3:04 ` Johan Vermeire WX21 54189
2000-08-18 11:58 ` Mo DeJong
2000-08-27 19:04 ` Ben Elliston
2 siblings, 0 replies; 8+ messages in thread
From: Johan Vermeire WX21 54189 @ 2000-08-18 3:04 UTC (permalink / raw)
To: Rouviere, Stephane; +Cc: Syd Polk, sourcenav, gnu
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 13891 bytes --]
Hi Stephane,
Â
Thanks for your help.
I've now used GNU's tar 1.13, and all files are now extracted correctly.
Is this TARÂ incompatibility a SUN Solaris 2.6 or GNU problem ?
Â
Â
Best Regards,
Johan Vermeire
Â
"Rouviere, Stephane" wrote:
 Hello, I
had the same problem with the tar: directory checksum error. It
seams to be a Sun tar problem. I
took a gnu version of tar, recompiled it under SunOS and then untar SN451.tar
with it and it works. The checksum error desappear. Hope
it will help you Stéphane Â
-----Original
Message-----
From: Johan Vermeire WX21
54189 [ mailto:Johan.Vermeire@alcatel.be ]
Sent: jeudi 17 août
2000 14:12
To: Syd Polk
Cc: sourcenav@sources.redhat.com
Subject: Re: Source Navigator
4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
Â
Hi Syd,
Thanks for your reply.
I've re-done the installation and I've the same problem with the configuration
of SourceNavigator 4.51
Â
After unpacking the tar file:
I got at the end the following message:
....
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCascaded_Use_of_Macros.html,
3883 bytes, 8 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCombining_Source_Files.html,
8168 bytes, 16 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConcatenation.html,
6850 bytes, 14 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals.html,
4326 bytes, 9 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals_and_Macros.html,
9793 bytes, 20 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppDuplication_of_Side_Effects.html,
5804 bytes, 12 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHeader_Files.html,
2793 bytes, 6 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHow_include_Works.html,
4383 bytes, 9 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppImproperly_Nested_Constructs.html,
2880 bytes, 6 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInheritance_and_Header_Files.html,
6463 bytes, 13 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInvoking_the_C_Preprocessor.html,
35022 bytes, 69 tape blocks
tar: directory checksum error
Is the tar file complete???
The size of the Gunzipped tar file:
btm0gn:/home/jvme/bin> ls -al SN451.tar
-rw-r--r--  1 jvme    xantiumÂ
59944960 Aug 17 13:50 SN451.tar
The contents after Configuring is:
btm0gn:/home/jvme/bin/SN451/build> ../configure --prefix=/cmx_tools/3EZ01881_SourceNavigator
Configuring for a sparc-sun-solaris2.6 host.
Created "Makefile" in /home/jvme/bin/SN451/build using "mh-frag"
Configuring db...
creating cache ../config.cache
...
...
checking for uid_t in sys/types.h... yes
checking for Tcl configuration script... configure: warning: Can't
find Tcl configuration definitions
checking for Tk configuration script... configure: warning: Can't find
Tk configuration definitions
checking for Tcl headers in the source tree... none
checking for tcl.h... no
configure: error: Can't find any Tcl headers
Configure in /home/jvme/bin/SN451/build/itcl
failed, exiting.
btm0gn:/home/jvme/bin/SN451/build> cd ..
btm0gn:/home/jvme/bin/SN451> ls -al
total 1664
drwxr-xr-x 11 jvme    xantium   Â
8192 Aug 17 13:57 .
drwxr-xr-x 46 jvme    xantium   Â
8192 Aug 17 13:52 ..
-rw-r-----  1 jvme    xantium  Â
18007 May 1 1998 COPYING
-rw-r-----  1 jvme    xantium  Â
25283 May 12Â 1998 COPYING.LIB
-rw-r-----  1 jvme    xantium Â
208768 Jul 10 22:29 ChangeLog
-rw-r-----  1 jvme    xantium  Â
52710 Jul 10 22:29 Makefile.in
-rw-r-----  1 jvme    xantium   Â
1719 May 1 1998 README
drwxr-xr-x  5 jvme    xantium   Â
8192 Aug 17 14:00 build
drwxr-xr-x  3 jvme    xantium   Â
8192 Jul 10 23:46 config
-rw-r-----  1 jvme    xantium  Â
17126 Jul 10 22:29 config-ml.in
-rwxr-x---  1 jvme    xantium  Â
26831 Oct 10Â 1998 config.guess
-rw-r-----  1 jvme    xantium   Â
2010 Oct 19Â 1998 config.if
-rwxr-x---  1 jvme    xantium  Â
26166 Jul 10 22:29 config.sub
-rwxr-x---  1 jvme    xantium  Â
50317 Jul 10 22:29 configure
-rw-r-----  1 jvme    xantium  Â
36104 Jul 10 22:29 configure.in
drwxr-xr-x 12 jvme    xantium   Â
8192 Jul 10 22:29 db
drwxr-xr-x  5 jvme    xantium   Â
8192 Jul 10 23:46 etc
drwxr-xr-x  8 jvme    xantium   Â
8192 Jul 10 23:46 grep
drwxr-xr-x  2 jvme    xantium   Â
8192 Jul 10 23:46 include
-rwxr-x---  1 jvme    xantium   Â
5598 Jul 15Â 1998 install-sh
drwxr-xr-x  8 jvme    xantium   Â
8192 Jul 10 23:46 itcl
drwxr-xr-x  5 jvme    xantium   Â
8192 Jul 10 23:46 libgui
-rwxr-x---  1 jvme    xantium  Â
51498 Jul 7 1998 ltconfig
-rw-r-----  1 jvme    xantium  Â
75122 Jul 14Â 1998 ltmain.sh
-rwxr-x---  1 jvme    xantium   Â
6274 Jun 10Â 1998 missing
-rwxr-x---  1 jvme    xantium    Â
730 May 1 1998 mkinstalldirs
-rwxr-x---  1 jvme    xantium    Â
869 May 1 1998 move-if-change
-rw-r-----  1 jvme    xantium  Â
14898 May 1 1998 mpw-README
-rw-r-----  1 jvme    xantium   Â
5169 May 1 1998 mpw-build.in
-rw-r-----  1 jvme    xantium   Â
4742 May 1 1998 mpw-config.in
-rw-r-----  1 jvme    xantium  Â
14664 May 1 1998 mpw-configure
-rw-r-----  1 jvme    xantium   Â
3171 May 1 1998 mpw-install
drwxr-xr-x  6 jvme    xantium   Â
8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451> dir
drwxr-xr-x 11 jvme    xantium   Â
8192 Aug 17 13:57 .
drwxr-xr-x 46 jvme    xantium   Â
8192 Aug 17 13:52 ..
drwxr-xr-x  5 jvme    xantium   Â
8192 Aug 17 14:00 build
drwxr-xr-x  3 jvme    xantium   Â
8192 Jul 10 23:46 config
drwxr-xr-x 12 jvme    xantium   Â
8192 Jul 10 22:29 db
drwxr-xr-x  5 jvme    xantium   Â
8192 Jul 10 23:46 etc
drwxr-xr-x  8 jvme    xantium   Â
8192 Jul 10 23:46 grep
drwxr-xr-x  2 jvme    xantium   Â
8192 Jul 10 23:46 include
drwxr-xr-x  8 jvme    xantium   Â
8192 Jul 10 23:46 itcl
drwxr-xr-x  5 jvme    xantium   Â
8192 Jul 10 23:46 libgui
drwxr-xr-x  6 jvme    xantium   Â
8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451>
I don't see a tcl and tk directory!
Â
Best Regards,
Johan
Â
Â
Syd Polk wrote:
You must use the tcl code provided with the Source-Navigator
package. Did you by
chance delete the tcl and tk directories after you expanded the tarball?
Johan Vermeire WX21 54189 wrote:
>
> Hi,
>
> I don't know to where I've to send SN bug (configure) reports, therefore
I
> mail to you.
> Sorry, if I'm not at the right person.
>
> ./.
>
> I started today with a first attempt to rebuild SN451 from scratch.
>
> btm0gn:/home/jvme/bin/SN451> ./configure
> --prefix=/cmx_tools/3EZ01881_SourceNavigator
> Configuring for a sparc-sun-solaris2.6 host.
> Created "Makefile" in /home/jvme/bin/SN451 using "mh-frag"
> ./config.status is unchanged
> Configuring db...
> loading cache ../config.cache
> checking for a BSD compatible install... ./install-sh -c
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... (cached) yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... missing
> checking whether to enable maintainer-specific portions of Makefiles...
no
> checking whether make sets ${MAKE}... (cached) yes
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a cross-compiler...
no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for cygwin32 environment... (cached) no
> checking for mingw32 environment... (cached) no
> checking for executable suffix... (cached) no
> checking for object suffix... (cached) o
> checking for ranlib... (cached) ranlib
> checking for false... (cached) /usr/bin/false
> checking for sh... (cached) /usr/bin/sh
> checking for sh5... (cached) /usr/bin/false
> checking for bash... (cached) /usr/bin/bash
> checking for cygwin32... (cached) no
> checking for Microsoft Visual C++... (cached) no
> checking checking for shell with functions... (cached) /usr/bin/sh
> checking for dirent.h that defines DIR... (cached) yes
> checking for opendir in -ldir... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
> checking for fcntl.h... (cached) yes
> checking for limits.h... (cached) yes
> checking for sys/time.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for ssize_t... (cached) yes
> checking for pgno_t... (cached) no
> checking whether byte ordering is bigendian... (cached) yes
> checking for working const... (cached) yes
> checking whether time.h and sys/time.h may both be included... (cached)
yes
> checking for st_blksize in struct stat... (cached) yes
> checking for mode_t... (cached) yes
> checking for off_t... (cached) yes
> checking for pid_t... (cached) yes
> checking for size_t... (cached) yes
> checking for u_char... (cached) yes
> checking for vprintf... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... (cached) yes
> checking for working mmap... (cached) yes
> checking for mkdir... (cached) yes
> checking for rmdir... (cached) yes
> checking for select... (cached) yes
> checking for memmove... (cached) yes
> checking for snprintf... (cached) yes
> checking for strerror... (cached) yes
> checking for sprintf return value... (cached) yes
> checking for int8_t... (cached) yes
> checking for u_int8_t... (cached) no
> checking for int16_t... (cached) yes
> checking for u_int16_t... (cached) no
> checking for int32_t... (cached) yes
> checking for u_int32_t... (cached) no
> checking for int64_t... (cached) yes
> checking for u_int64_t... (cached) no
> creating ./config.status
> creating Makefile
> creating PORT/Makefile
> creating config.h
> config.h is unchanged
> Configuring itcl...
> loading cache ../config.cache
> checking for a BSD compatible install... ./../install-sh -c
> checking for ranlib... (cached) ranlib
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a cross-compiler...
no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for object suffix... (cached) o
> checking for cygwin32 environment... (cached) no
> checking for mingw32 environment... (cached) no
> checking for executable suffix... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for mode_t... (cached) yes
> checking for pid_t... (cached) yes
> checking for size_t... (cached) yes
> checking for uid_t in sys/types.h... yes
> checking for Tcl configuration script... configure: warning: Can't
find Tcl
> configuration definitions
> checking for Tk configuration script... configure: warning: Can't
find Tk
> configuration definitions
> checking for Tcl headers in the source tree... none
> checking for tcl.h... no
> configure: error: Can't find any Tcl headers
> Configure in /home/jvme/bin/SN451/itcl failed, exiting.
> btm0gn:/home/jvme/bin/SN451>
>
> And the make doesn't start:
>
> btm0gn:/home/jvme/bin/SN451> make
> make all-recursive
> Making all in PORT
> mksh: Fatal error in reader: = missing from replacement macro reference
> Current working directory /home/jvme/bin/SN451/db/PORT
> *** Error code 1
> make: Fatal error: Command failed for target `all-recursive'
> Current working directory /home/jvme/bin/SN451/db
> *** Error code 1
> make: Fatal error: Command failed for target `all-recursive-am'
> Current working directory /home/jvme/bin/SN451/db
> *** Error code 1
> make: Fatal error: Command failed for target `all-db'
> btm0gn:/home/jvme/bin/SN451>
>
> ./.
>
> Can you help?
>
>
> Best Regards,
>
> Johan Vermeire
begin:vcard
n:Vermeire;Johan
tel;fax:+32 (0)3 2409816
tel;work:+32 (0)3 2404189
x-mozilla-html:FALSE
url: http://www.alcate.be
org:Alcatel Bell n.v.;CID - WX21 - F/A2
adr:;;F. Wellesplein 1;Antwerp;;2018;Belgium
version:2.1
email;internet:Johan.Vermeire@alcatel.be
title:Tools & Technology officer
x-mozilla-cpt:;-7528
fn:Johan Vermeire
end:vcard
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
@ 2000-08-18 1:30 Rouviere, Stephane
2000-08-18 3:04 ` Johan Vermeire WX21 54189
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Rouviere, Stephane @ 2000-08-18 1:30 UTC (permalink / raw)
To: 'Johan Vermeire WX21 54189', Syd Polk; +Cc: sourcenav
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 14214 bytes --]
Hello,
Â
I had
the same problem with the tar: directory checksum error.
It
seams to be a Sun tar problem.
I took
a gnu version of tar, recompiled it under SunOS and then untar SN451.tar with it
and it works. The checksum error desappear.
Â
Hope
it will help you
Â
Stéphane
Â
-----Original Message----- From: Johan Vermeire WX21 54189
[mailto:Johan.Vermeire@alcatel.be] Sent: jeudi 17 août 2000
14:12 To: Syd Polk Cc:
sourcenav@sources.redhat.com Subject: Re: Source Navigator 4.5.1
-> Configure problem -> Unpacking the tar file gives a checksum
error Hi Syd,
Thanks for your reply.
I've re-done the installation and I've the same problem with the
configuration of SourceNavigator 4.51 Â
After unpacking the tar file:
I got at the end the following message:
.... x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCascaded_Use_of_Macros.html,
3883 bytes, 8 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCombining_Source_Files.html,
8168 bytes, 16 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConcatenation.html,
6850 bytes, 14 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals.html,
4326 bytes, 9 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals_and_Macros.html,
9793 bytes, 20 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppDuplication_of_Side_Effects.html,
5804 bytes, 12 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHeader_Files.html,
2793 bytes, 6 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHow_include_Works.html,
4383 bytes, 9 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppImproperly_Nested_Constructs.html,
2880 bytes, 6 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInheritance_and_Header_Files.html,
6463 bytes, 13 tape blocks x
SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInvoking_the_C_Preprocessor.html,
35022 bytes, 69 tape blocks tar: directory checksum
error
Is the tar file complete???
The size of the Gunzipped tar file:
btm0gn:/home/jvme/bin> ls -al SN451.tar -rw-r--r--Â Â 1
jvme    xantium 59944960 Aug 17 13:50 SN451.tar
The contents after Configuring is:
btm0gn:/home/jvme/bin/SN451/build> ../configure
--prefix=/cmx_tools/3EZ01881_SourceNavigator Configuring for a
sparc-sun-solaris2.6 host. Created "Makefile" in
/home/jvme/bin/SN451/build using "mh-frag" Configuring db... creating
cache ../config.cache ...
... checking for uid_t in sys/types.h... yes checking for Tcl
configuration script... configure: warning: Can't find Tcl configuration
definitions checking for Tk configuration script... configure: warning:
Can't find Tk configuration definitions checking for Tcl headers in the
source tree... none checking for tcl.h... no configure: error: Can't find any Tcl headers Configure in /home/jvme/bin/SN451/build/itcl failed,
exiting.
btm0gn:/home/jvme/bin/SN451/build> cd ..
btm0gn:/home/jvme/bin/SN451> ls -al total 1664 drwxr-xr-xÂ
11 jvme    xantium    8192 Aug 17
13:57 . drwxr-xr-x 46 jvme   Â
xantium    8192 Aug 17 13:52 ..
-rw-r-----  1 jvme   Â
xantium   18007 May 1 1998 COPYING
-rw-r-----  1 jvme   Â
xantium   25283 May 12 1998 COPYING.LIB
-rw-r-----  1 jvme    xantium Â
208768 Jul 10 22:29 ChangeLog -rw-r-----Â Â 1
jvme    xantium   52710 Jul 10 22:29
Makefile.in -rw-r-----  1 jvme   Â
xantium    1719 May 1 1998 README
drwxr-xr-x  5 jvme   Â
xantium    8192 Aug 17 14:00 build
drwxr-xr-x  3 jvme   Â
xantium    8192 Jul 10 23:46 config
-rw-r-----  1 jvme   Â
xantium   17126 Jul 10 22:29 config-ml.in
-rwxr-x---  1 jvme   Â
xantium   26831 Oct 10 1998 config.guess
-rw-r-----  1 jvme   Â
xantium    2010 Oct 19 1998 config.if
-rwxr-x---  1 jvme   Â
xantium   26166 Jul 10 22:29 config.sub
-rwxr-x---  1 jvme   Â
xantium   50317 Jul 10 22:29 configure
-rw-r-----  1 jvme   Â
xantium   36104 Jul 10 22:29 configure.in drwxr-xr-xÂ
12 jvme    xantium    8192 Jul 10
22:29 db drwxr-xr-x  5 jvme   Â
xantium    8192 Jul 10 23:46 etc
drwxr-xr-x  8 jvme   Â
xantium    8192 Jul 10 23:46 grep
drwxr-xr-x  2 jvme   Â
xantium    8192 Jul 10 23:46 include
-rwxr-x---  1 jvme   Â
xantium    5598 Jul 15 1998 install-sh
drwxr-xr-x  8 jvme   Â
xantium    8192 Jul 10 23:46 itcl
drwxr-xr-x  5 jvme   Â
xantium    8192 Jul 10 23:46 libgui
-rwxr-x---  1 jvme   Â
xantium   51498 Jul 7 1998 ltconfig
-rw-r-----  1 jvme   Â
xantium   75122 Jul 14 1998 ltmain.sh
-rwxr-x---  1 jvme   Â
xantium    6274 Jun 10 1998 missing
-rwxr-x---  1 jvme   Â
xantium     730 May 1 1998 mkinstalldirs
-rwxr-x---  1 jvme   Â
xantium     869 May 1 1998
move-if-change -rw-r-----  1 jvme   Â
xantium   14898 May 1 1998 mpw-README
-rw-r-----  1 jvme   Â
xantium    5169 May 1 1998 mpw-build.in
-rw-r-----  1 jvme   Â
xantium    4742 May 1 1998 mpw-config.in
-rw-r-----  1 jvme   Â
xantium   14664 May 1 1998 mpw-configure
-rw-r-----  1 jvme   Â
xantium    3171 May 1 1998 mpw-install
drwxr-xr-x  6 jvme   Â
xantium    8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451> dir drwxr-xr-x 11
jvme    xantium    8192 Aug 17 13:57
. drwxr-xr-x 46 jvme   Â
xantium    8192 Aug 17 13:52 ..
drwxr-xr-x  5 jvme   Â
xantium    8192 Aug 17 14:00 build
drwxr-xr-x  3 jvme   Â
xantium    8192 Jul 10 23:46 config drwxr-xr-xÂ
12 jvme    xantium    8192 Jul 10
22:29 db drwxr-xr-x  5 jvme   Â
xantium    8192 Jul 10 23:46 etc
drwxr-xr-x  8 jvme   Â
xantium    8192 Jul 10 23:46 grep
drwxr-xr-x  2 jvme   Â
xantium    8192 Jul 10 23:46 include
drwxr-xr-x  8 jvme   Â
xantium    8192 Jul 10 23:46 itcl
drwxr-xr-x  5 jvme   Â
xantium    8192 Jul 10 23:46 libgui
drwxr-xr-x  6 jvme   Â
xantium    8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451>
I don't see a tcl and tk directory!
Â
Best Regards,
Johan  Â
Syd Polk wrote:
You must use the tcl code provided with the
Source-Navigator package. Did you by chance delete the tcl and tk
directories after you expanded the tarball?
Johan Vermeire WX21 54189 wrote: > > Hi, > >
I don't know to where I've to send SN bug (configure) reports, therefore I
> mail to you. > Sorry, if I'm not at the right person.
> > ./. > > I started today with a first attempt
to rebuild SN451 from scratch. > >
btm0gn:/home/jvme/bin/SN451> ./configure >
--prefix=/cmx_tools/3EZ01881_SourceNavigator > Configuring for a
sparc-sun-solaris2.6 host. > Created "Makefile" in
/home/jvme/bin/SN451 using "mh-frag" > ./config.status is unchanged
> Configuring db... > loading cache ../config.cache >
checking for a BSD compatible install... ./install-sh -c > checking
whether build environment is sane... yes > checking whether make sets
${MAKE}... (cached) yes > checking for working aclocal... missing
> checking for working autoconf... missing > checking for
working automake... missing > checking for working autoheader...
missing > checking for working makeinfo... missing > checking
whether to enable maintainer-specific portions of Makefiles... no >
checking whether make sets ${MAKE}... (cached) yes > checking for
gcc... (cached) gcc > checking whether the C compiler (gcc -g -O2 )
works... yes > checking whether the C compiler (gcc -g -O2 ) is a
cross-compiler... no > checking whether we are using GNU C...
(cached) yes > checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E >
checking for cygwin32 environment... (cached) no > checking for
mingw32 environment... (cached) no > checking for executable
suffix... (cached) no > checking for object suffix... (cached) o
> checking for ranlib... (cached) ranlib > checking for
false... (cached) /usr/bin/false > checking for sh... (cached)
/usr/bin/sh > checking for sh5... (cached) /usr/bin/false >
checking for bash... (cached) /usr/bin/bash > checking for
cygwin32... (cached) no > checking for Microsoft Visual C++...
(cached) no > checking checking for shell with functions... (cached)
/usr/bin/sh > checking for dirent.h that defines DIR... (cached) yes
> checking for opendir in -ldir... (cached) no > checking for
ANSI C header files... (cached) yes > checking for sys/wait.h that is
POSIX.1 compatible... (cached) yes > checking for fcntl.h... (cached)
yes > checking for limits.h... (cached) yes > checking for
sys/time.h... (cached) yes > checking for unistd.h... (cached) yes
> checking for ssize_t... (cached) yes > checking for
pgno_t... (cached) no > checking whether byte ordering is
bigendian... (cached) yes > checking for working const... (cached)
yes > checking whether time.h and sys/time.h may both be included...
(cached) yes > checking for st_blksize in struct stat... (cached) yes
> checking for mode_t... (cached) yes > checking for off_t...
(cached) yes > checking for pid_t... (cached) yes > checking
for size_t... (cached) yes > checking for u_char... (cached) yes
> checking for vprintf... (cached) yes > checking for
unistd.h... (cached) yes > checking for getpagesize... (cached) yes
> checking for working mmap... (cached) yes > checking for
mkdir... (cached) yes > checking for rmdir... (cached) yes >
checking for select... (cached) yes > checking for memmove...
(cached) yes > checking for snprintf... (cached) yes >
checking for strerror... (cached) yes > checking for sprintf return
value... (cached) yes > checking for int8_t... (cached) yes >
checking for u_int8_t... (cached) no > checking for int16_t...
(cached) yes > checking for u_int16_t... (cached) no >
checking for int32_t... (cached) yes > checking for u_int32_t...
(cached) no > checking for int64_t... (cached) yes > checking
for u_int64_t... (cached) no > creating ./config.status >
creating Makefile > creating PORT/Makefile > creating config.h
> config.h is unchanged > Configuring itcl... > loading
cache ../config.cache > checking for a BSD compatible install...
./../install-sh -c > checking for ranlib... (cached) ranlib >
checking for gcc... (cached) gcc > checking whether the C compiler
(gcc -g -O2 ) works... yes > checking whether the C compiler (gcc -g
-O2 ) is a cross-compiler... no > checking whether we are using GNU
C... (cached) yes > checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E >
checking for object suffix... (cached) o > checking for cygwin32
environment... (cached) no > checking for mingw32 environment...
(cached) no > checking for executable suffix... (cached) no >
checking for ANSI C header files... (cached) yes > checking for
mode_t... (cached) yes > checking for pid_t... (cached) yes >
checking for size_t... (cached) yes > checking for uid_t in
sys/types.h... yes > checking for Tcl configuration script...
configure: warning: Can't find Tcl > configuration definitions
> checking for Tk configuration script... configure: warning: Can't
find Tk > configuration definitions > checking for Tcl headers
in the source tree... none > checking for tcl.h... no >
configure: error: Can't find any Tcl headers > Configure in
/home/jvme/bin/SN451/itcl failed, exiting. >
btm0gn:/home/jvme/bin/SN451> > > And the make doesn't
start: > > btm0gn:/home/jvme/bin/SN451> make >
make all-recursive > Making all in PORT > mksh: Fatal
error in reader: = missing from replacement macro reference > Current
working directory /home/jvme/bin/SN451/db/PORT > *** Error code 1
> make: Fatal error: Command failed for target `all-recursive'
> Current working directory /home/jvme/bin/SN451/db > ***
Error code 1 > make: Fatal error: Command failed for target
`all-recursive-am' > Current working directory
/home/jvme/bin/SN451/db > *** Error code 1 > make: Fatal
error: Command failed for target `all-db' >
btm0gn:/home/jvme/bin/SN451> > > ./. > > Can
you help? > > > Best Regards, > > Johan
Vermeire
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error
2000-08-16 8:30 ` Syd Polk
@ 2000-08-17 5:12 ` Johan Vermeire WX21 54189
0 siblings, 0 replies; 8+ messages in thread
From: Johan Vermeire WX21 54189 @ 2000-08-17 5:12 UTC (permalink / raw)
To: Syd Polk; +Cc: sourcenav
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 13070 bytes --]
Hi Syd,
Thanks for your reply.
I've re-done the installation and I've the same problem with the configuration
of SourceNavigator 4.51
Â
After unpacking the tar file:
I got at the end the following message:
....
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCascaded_Use_of_Macros.html,
3883 bytes, 8 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppCombining_Source_Files.html,
8168 bytes, 16 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConcatenation.html,
6850 bytes, 14 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals.html,
4326 bytes, 9 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppConditionals_and_Macros.html,
9793 bytes, 20 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppDuplication_of_Side_Effects.html,
5804 bytes, 12 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHeader_Files.html,
2793 bytes, 6 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppHow_include_Works.html,
4383 bytes, 9 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppImproperly_Nested_Constructs.html,
2880 bytes, 6 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInheritance_and_Header_Files.html,
6463 bytes, 13 tape blocks
x SN451/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor/cppInvoking_the_C_Preprocessor.html,
35022 bytes, 69 tape blocks
tar: directory checksum error
Is the tar file complete???
The size of the Gunzipped tar file:
btm0gn:/home/jvme/bin> ls -al SN451.tar
-rw-r--r--  1 jvme    xantiumÂ
59944960 Aug 17 13:50 SN451.tar
The contents after Configuring is:
btm0gn:/home/jvme/bin/SN451/build> ../configure --prefix=/cmx_tools/3EZ01881_SourceNavigator
Configuring for a sparc-sun-solaris2.6 host.
Created "Makefile" in /home/jvme/bin/SN451/build using "mh-frag"
Configuring db...
creating cache ../config.cache
...
...
checking for uid_t in sys/types.h... yes
checking for Tcl configuration script... configure: warning: Can't
find Tcl configuration definitions
checking for Tk configuration script... configure: warning: Can't find
Tk configuration definitions
checking for Tcl headers in the source tree... none
checking for tcl.h... no
configure: error: Can't find any Tcl headers
Configure in /home/jvme/bin/SN451/build/itcl
failed, exiting.
btm0gn:/home/jvme/bin/SN451/build> cd ..
btm0gn:/home/jvme/bin/SN451> ls -al
total 1664
drwxr-xr-x 11 jvme    xantium   Â
8192 Aug 17 13:57 .
drwxr-xr-x 46 jvme    xantium   Â
8192 Aug 17 13:52 ..
-rw-r-----  1 jvme    xantium  Â
18007 May 1 1998 COPYING
-rw-r-----  1 jvme    xantium  Â
25283 May 12Â 1998 COPYING.LIB
-rw-r-----  1 jvme    xantium Â
208768 Jul 10 22:29 ChangeLog
-rw-r-----  1 jvme    xantium  Â
52710 Jul 10 22:29 Makefile.in
-rw-r-----  1 jvme    xantium   Â
1719 May 1 1998 README
drwxr-xr-x  5 jvme    xantium   Â
8192 Aug 17 14:00 build
drwxr-xr-x  3 jvme    xantium   Â
8192 Jul 10 23:46 config
-rw-r-----  1 jvme    xantium  Â
17126 Jul 10 22:29 config-ml.in
-rwxr-x---  1 jvme    xantium  Â
26831 Oct 10Â 1998 config.guess
-rw-r-----  1 jvme    xantium   Â
2010 Oct 19Â 1998 config.if
-rwxr-x---  1 jvme    xantium  Â
26166 Jul 10 22:29 config.sub
-rwxr-x---  1 jvme    xantium  Â
50317 Jul 10 22:29 configure
-rw-r-----  1 jvme    xantium  Â
36104 Jul 10 22:29 configure.in
drwxr-xr-x 12 jvme    xantium   Â
8192 Jul 10 22:29 db
drwxr-xr-x  5 jvme    xantium   Â
8192 Jul 10 23:46 etc
drwxr-xr-x  8 jvme    xantium   Â
8192 Jul 10 23:46 grep
drwxr-xr-x  2 jvme    xantium   Â
8192 Jul 10 23:46 include
-rwxr-x---  1 jvme    xantium   Â
5598 Jul 15Â 1998 install-sh
drwxr-xr-x  8 jvme    xantium   Â
8192 Jul 10 23:46 itcl
drwxr-xr-x  5 jvme    xantium   Â
8192 Jul 10 23:46 libgui
-rwxr-x---  1 jvme    xantium  Â
51498 Jul 7 1998 ltconfig
-rw-r-----  1 jvme    xantium  Â
75122 Jul 14Â 1998 ltmain.sh
-rwxr-x---  1 jvme    xantium   Â
6274 Jun 10Â 1998 missing
-rwxr-x---  1 jvme    xantium    Â
730 May 1 1998 mkinstalldirs
-rwxr-x---  1 jvme    xantium    Â
869 May 1 1998 move-if-change
-rw-r-----  1 jvme    xantium  Â
14898 May 1 1998 mpw-README
-rw-r-----  1 jvme    xantium   Â
5169 May 1 1998 mpw-build.in
-rw-r-----  1 jvme    xantium   Â
4742 May 1 1998 mpw-config.in
-rw-r-----  1 jvme    xantium  Â
14664 May 1 1998 mpw-configure
-rw-r-----  1 jvme    xantium   Â
3171 May 1 1998 mpw-install
drwxr-xr-x  6 jvme    xantium   Â
8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451> dir
drwxr-xr-x 11 jvme    xantium   Â
8192 Aug 17 13:57 .
drwxr-xr-x 46 jvme    xantium   Â
8192 Aug 17 13:52 ..
drwxr-xr-x  5 jvme    xantium   Â
8192 Aug 17 14:00 build
drwxr-xr-x  3 jvme    xantium   Â
8192 Jul 10 23:46 config
drwxr-xr-x 12 jvme    xantium   Â
8192 Jul 10 22:29 db
drwxr-xr-x  5 jvme    xantium   Â
8192 Jul 10 23:46 etc
drwxr-xr-x  8 jvme    xantium   Â
8192 Jul 10 23:46 grep
drwxr-xr-x  2 jvme    xantium   Â
8192 Jul 10 23:46 include
drwxr-xr-x  8 jvme    xantium   Â
8192 Jul 10 23:46 itcl
drwxr-xr-x  5 jvme    xantium   Â
8192 Jul 10 23:46 libgui
drwxr-xr-x  6 jvme    xantium   Â
8192 Aug 17 13:53 snavigator
btm0gn:/home/jvme/bin/SN451>
I don't see a tcl and tk directory!
Â
Best Regards,
Johan
Â
Â
Syd Polk wrote:
You must use the tcl code provided with the Source-Navigator
package. Did you by
chance delete the tcl and tk directories after you expanded the tarball?
Johan Vermeire WX21 54189 wrote:
>
> Hi,
>
> I don't know to where I've to send SN bug (configure) reports, therefore
I
> mail to you.
> Sorry, if I'm not at the right person.
>
> ./.
>
> I started today with a first attempt to rebuild SN451 from scratch.
>
> btm0gn:/home/jvme/bin/SN451> ./configure
> --prefix=/cmx_tools/3EZ01881_SourceNavigator
> Configuring for a sparc-sun-solaris2.6 host.
> Created "Makefile" in /home/jvme/bin/SN451 using "mh-frag"
> ./config.status is unchanged
> Configuring db...
> loading cache ../config.cache
> checking for a BSD compatible install... ./install-sh -c
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... (cached) yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... missing
> checking whether to enable maintainer-specific portions of Makefiles...
no
> checking whether make sets ${MAKE}... (cached) yes
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a cross-compiler...
no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for cygwin32 environment... (cached) no
> checking for mingw32 environment... (cached) no
> checking for executable suffix... (cached) no
> checking for object suffix... (cached) o
> checking for ranlib... (cached) ranlib
> checking for false... (cached) /usr/bin/false
> checking for sh... (cached) /usr/bin/sh
> checking for sh5... (cached) /usr/bin/false
> checking for bash... (cached) /usr/bin/bash
> checking for cygwin32... (cached) no
> checking for Microsoft Visual C++... (cached) no
> checking checking for shell with functions... (cached) /usr/bin/sh
> checking for dirent.h that defines DIR... (cached) yes
> checking for opendir in -ldir... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
> checking for fcntl.h... (cached) yes
> checking for limits.h... (cached) yes
> checking for sys/time.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for ssize_t... (cached) yes
> checking for pgno_t... (cached) no
> checking whether byte ordering is bigendian... (cached) yes
> checking for working const... (cached) yes
> checking whether time.h and sys/time.h may both be included... (cached)
yes
> checking for st_blksize in struct stat... (cached) yes
> checking for mode_t... (cached) yes
> checking for off_t... (cached) yes
> checking for pid_t... (cached) yes
> checking for size_t... (cached) yes
> checking for u_char... (cached) yes
> checking for vprintf... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... (cached) yes
> checking for working mmap... (cached) yes
> checking for mkdir... (cached) yes
> checking for rmdir... (cached) yes
> checking for select... (cached) yes
> checking for memmove... (cached) yes
> checking for snprintf... (cached) yes
> checking for strerror... (cached) yes
> checking for sprintf return value... (cached) yes
> checking for int8_t... (cached) yes
> checking for u_int8_t... (cached) no
> checking for int16_t... (cached) yes
> checking for u_int16_t... (cached) no
> checking for int32_t... (cached) yes
> checking for u_int32_t... (cached) no
> checking for int64_t... (cached) yes
> checking for u_int64_t... (cached) no
> creating ./config.status
> creating Makefile
> creating PORT/Makefile
> creating config.h
> config.h is unchanged
> Configuring itcl...
> loading cache ../config.cache
> checking for a BSD compatible install... ./../install-sh -c
> checking for ranlib... (cached) ranlib
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 ) works... yes
> checking whether the C compiler (gcc -g -O2 ) is a cross-compiler...
no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking for object suffix... (cached) o
> checking for cygwin32 environment... (cached) no
> checking for mingw32 environment... (cached) no
> checking for executable suffix... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for mode_t... (cached) yes
> checking for pid_t... (cached) yes
> checking for size_t... (cached) yes
> checking for uid_t in sys/types.h... yes
> checking for Tcl configuration script... configure: warning: Can't
find Tcl
> configuration definitions
> checking for Tk configuration script... configure: warning: Can't
find Tk
> configuration definitions
> checking for Tcl headers in the source tree... none
> checking for tcl.h... no
> configure: error: Can't find any Tcl headers
> Configure in /home/jvme/bin/SN451/itcl failed, exiting.
> btm0gn:/home/jvme/bin/SN451>
>
> And the make doesn't start:
>
> btm0gn:/home/jvme/bin/SN451> make
> make all-recursive
> Making all in PORT
> mksh: Fatal error in reader: = missing from replacement macro reference
> Current working directory /home/jvme/bin/SN451/db/PORT
> *** Error code 1
> make: Fatal error: Command failed for target `all-recursive'
> Current working directory /home/jvme/bin/SN451/db
> *** Error code 1
> make: Fatal error: Command failed for target `all-recursive-am'
> Current working directory /home/jvme/bin/SN451/db
> *** Error code 1
> make: Fatal error: Command failed for target `all-db'
> btm0gn:/home/jvme/bin/SN451>
>
> ./.
>
> Can you help?
>
>
> Best Regards,
>
> Johan Vermeire
begin:vcard
n:Vermeire;Johan
tel;fax:+32 (0)3 2409816
tel;work:+32 (0)3 2404189
x-mozilla-html:FALSE
url: http://www.alcate.be
org:Alcatel Bell n.v.;CID - WX21 - F/A2
adr:;;F. Wellesplein 1;Antwerp;;2018;Belgium
version:2.1
email;internet:Johan.Vermeire@alcatel.be
title:Tools & Technology officer
x-mozilla-cpt:;-7528
fn:Johan Vermeire
end:vcard
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2000-08-28 13:06 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-08-18 4:48 Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error Rouviere, Stephane
-- strict thread matches above, loose matches on Subject: below --
2000-08-18 1:30 Rouviere, Stephane
2000-08-18 3:04 ` Johan Vermeire WX21 54189
2000-08-18 11:58 ` Mo DeJong
2000-08-27 19:04 ` Ben Elliston
2000-08-28 11:41 ` Syd Polk
2000-08-28 13:06 ` Tom Tromey
2000-08-15 23:52 Source Navigator 4.5.1 -> Configure problem Johan Vermeire WX21 54189
2000-08-16 8:30 ` Syd Polk
2000-08-17 5:12 ` Source Navigator 4.5.1 -> Configure problem -> Unpacking the tar file gives a checksum error Johan Vermeire WX21 54189
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).