* [PATCH -tip tracing/kprobes v2] Powerpc port of the kprobe-based event tracer [not found] <20100111125952.604518521@mars.in.ibm.com> @ 2010-01-11 13:03 ` Mahesh Salgaonkar 2010-01-15 3:13 ` Benjamin Herrenschmidt 0 siblings, 1 reply; 3+ messages in thread From: Mahesh Salgaonkar @ 2010-01-11 13:03 UTC (permalink / raw) To: linux-kernel Cc: Ingo Molnar, linuxppc-dev, Ananth N Mavinakayanahalli, Benjamin Herrenschmidt, Michael Neuling, systemtap, Mahesh Salgaonkar, Masami Hiramatsu [-- Attachment #1: kprobes.ppc.patch --] [-- Type: text/plain, Size: 7827 bytes --] This patch ports the kprobe-based event tracer to powerpc. This patch is based in x86 port. This brings powerpc on par with x86. ChangeLog - v2: - Removed regs_get_argument_nth() API as function argument access syntax is dropped from kprobe-tracer. Please refer to patches below on Linux PPC mailing list: http://lists.ozlabs.org/pipermail/linuxppc-dev/2010-January/079331.html http://lists.ozlabs.org/pipermail/linuxppc-dev/2010-January/079332.html - Rebased to commit f61d6b1dcb06d62bc20d40e51c7a1e80275a80ab of -tip This patch is dependent on following patch: http://lists.ozlabs.org/pipermail/linuxppc-dev/2010-January/079331.html Port the following API's to ppc for accessing registers and stack entries from pt_regs. - regs_query_register_offset(const char *name) Query the offset of "name" register. - regs_query_register_name(unsigned int offset) Query the name of register by its offset. - regs_get_register(struct pt_regs *regs, unsigned int offset) Get the value of a register by its offset. - regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr) Check the address is in the kernel stack. - regs_get_kernel_stack_nth(struct pt_regs *reg, unsigned int nth) Get Nth entry of the kernel stack. (N >= 0) Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> --- arch/powerpc/include/asm/ptrace.h | 61 ++++++++++++++++++++++ arch/powerpc/kernel/ptrace.c | 102 +++++++++++++++++++++++++++++++++++++ kernel/trace/Kconfig | 2 - 3 files changed, 164 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index cbd759e..cb2eeda 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -83,6 +83,7 @@ struct pt_regs { #define instruction_pointer(regs) ((regs)->nip) #define user_stack_pointer(regs) ((regs)->gpr[1]) +#define kernel_stack_pointer(regs) ((regs)->gpr[1]) #define regs_return_value(regs) ((regs)->gpr[3]) #ifdef CONFIG_SMP @@ -131,6 +132,66 @@ do { \ } while (0) #endif /* __powerpc64__ */ +/* Query offset/name of register from its name/offset */ +#include <linux/stddef.h> +#include <linux/thread_info.h> +extern int regs_query_register_offset(const char *name); +extern const char *regs_query_register_name(unsigned int offset); +#define MAX_REG_OFFSET (offsetof(struct pt_regs, result)) + +/** + * regs_get_register() - get register value from its offset + * @regs: pt_regs from which register value is gotten + * @offset: offset number of the register. + * + * regs_get_register returns the value of a register whose offset from @regs. + * The @offset is the offset of the register in struct pt_regs. + * If @offset is bigger than MAX_REG_OFFSET, this returns 0. + */ +static inline unsigned long regs_get_register(struct pt_regs *regs, + unsigned int offset) +{ + if (unlikely(offset > MAX_REG_OFFSET)) + return 0; + return *(unsigned long *)((unsigned long)regs + offset); +} + +/** + * regs_within_kernel_stack() - check the address in the stack + * @regs: pt_regs which contains kernel stack pointer. + * @addr: address which is checked. + * + * regs_within_kernel_stack() checks @addr is within the kernel stack page(s). + * If @addr is within the kernel stack, it returns true. If not, returns false. + */ + +static inline bool regs_within_kernel_stack(struct pt_regs *regs, + unsigned long addr) +{ + return ((addr & ~(THREAD_SIZE - 1)) == + (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1))); +} + +/** + * regs_get_kernel_stack_nth() - get Nth entry of the stack + * @regs: pt_regs which contains kernel stack pointer. + * @n: stack entry number. + * + * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which + * is specified by @regs. If the @n th entry is NOT in the kernel stack, + * this returns 0. + */ +static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, + unsigned int n) +{ + unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs); + addr += n; + if (regs_within_kernel_stack(regs, (unsigned long)addr)) + return *addr; + else + return 0; +} + /* * These are defined as per linux/ptrace.h, which see. */ diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index ef14988..e816aba 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -39,6 +39,108 @@ #include <asm/system.h> /* + * The parameter save area on the stack is used to store arguments being passed + * to callee function and is located at fixed offset from stack pointer. + */ +#ifdef CONFIG_PPC32 +#define PARAMETER_SAVE_AREA_OFFSET 24 /* bytes */ +#else /* CONFIG_PPC32 */ +#define PARAMETER_SAVE_AREA_OFFSET 48 /* bytes */ +#endif + +struct pt_regs_offset { + const char *name; + int offset; +}; + +#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)} +#define REG_OFFSET_END {.name = NULL, .offset = 0} + +static const struct pt_regs_offset regoffset_table[] = { + REG_OFFSET_NAME(gpr[0]), + REG_OFFSET_NAME(gpr[1]), + REG_OFFSET_NAME(gpr[2]), + REG_OFFSET_NAME(gpr[3]), + REG_OFFSET_NAME(gpr[4]), + REG_OFFSET_NAME(gpr[5]), + REG_OFFSET_NAME(gpr[6]), + REG_OFFSET_NAME(gpr[7]), + REG_OFFSET_NAME(gpr[8]), + REG_OFFSET_NAME(gpr[9]), + REG_OFFSET_NAME(gpr[10]), + REG_OFFSET_NAME(gpr[11]), + REG_OFFSET_NAME(gpr[12]), + REG_OFFSET_NAME(gpr[13]), + REG_OFFSET_NAME(gpr[14]), + REG_OFFSET_NAME(gpr[15]), + REG_OFFSET_NAME(gpr[16]), + REG_OFFSET_NAME(gpr[17]), + REG_OFFSET_NAME(gpr[18]), + REG_OFFSET_NAME(gpr[19]), + REG_OFFSET_NAME(gpr[20]), + REG_OFFSET_NAME(gpr[21]), + REG_OFFSET_NAME(gpr[22]), + REG_OFFSET_NAME(gpr[23]), + REG_OFFSET_NAME(gpr[24]), + REG_OFFSET_NAME(gpr[25]), + REG_OFFSET_NAME(gpr[26]), + REG_OFFSET_NAME(gpr[27]), + REG_OFFSET_NAME(gpr[28]), + REG_OFFSET_NAME(gpr[29]), + REG_OFFSET_NAME(gpr[30]), + REG_OFFSET_NAME(gpr[31]), + REG_OFFSET_NAME(nip), + REG_OFFSET_NAME(msr), + REG_OFFSET_NAME(orig_gpr3), + REG_OFFSET_NAME(ctr), + REG_OFFSET_NAME(link), + REG_OFFSET_NAME(xer), + REG_OFFSET_NAME(ccr), +#ifdef CONFIG_PPC64 + REG_OFFSET_NAME(softe), +#else + REG_OFFSET_NAME(mq), +#endif + REG_OFFSET_NAME(trap), + REG_OFFSET_NAME(dar), + REG_OFFSET_NAME(dsisr), + REG_OFFSET_NAME(result), + REG_OFFSET_END, +}; + +/** + * regs_query_register_offset() - query register offset from its name + * @name: the name of a register + * + * regs_query_register_offset() returns the offset of a register in struct + * pt_regs from its name. If the name is invalid, this returns -EINVAL; + */ +int regs_query_register_offset(const char *name) +{ + const struct pt_regs_offset *roff; + for (roff = regoffset_table; roff->name != NULL; roff++) + if (!strcmp(roff->name, name)) + return roff->offset; + return -EINVAL; +} + +/** + * regs_query_register_name() - query register name from its offset + * @offset: the offset of a register in struct pt_regs. + * + * regs_query_register_name() returns the name of a register from its + * offset in struct pt_regs. If the @offset is invalid, this returns NULL; + */ +const char *regs_query_register_name(unsigned int offset) +{ + const struct pt_regs_offset *roff; + for (roff = regoffset_table; roff->name != NULL; roff++) + if (roff->offset == offset) + return roff->name; + return NULL; +} + +/* * does not yet catch signals sent when the child dies. * in exit.c or in signal.c. */ diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 6c22d8a..4d95966 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -451,7 +451,7 @@ config BLK_DEV_IO_TRACE config KPROBE_EVENT depends on KPROBES - depends on X86 + depends on X86 || PPC bool "Enable kprobes-based dynamic events" select TRACING default y ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH -tip tracing/kprobes v2] Powerpc port of the kprobe-based event tracer 2010-01-11 13:03 ` [PATCH -tip tracing/kprobes v2] Powerpc port of the kprobe-based event tracer Mahesh Salgaonkar @ 2010-01-15 3:13 ` Benjamin Herrenschmidt 2010-01-19 7:35 ` Mahesh Jagannath Salgaonkar 0 siblings, 1 reply; 3+ messages in thread From: Benjamin Herrenschmidt @ 2010-01-15 3:13 UTC (permalink / raw) To: Mahesh Salgaonkar Cc: linux-kernel, Ingo Molnar, linuxppc-dev, Ananth N Mavinakayanahalli, Michael Neuling, systemtap, Masami Hiramatsu Hi Mahesh ! > +/** > + * regs_within_kernel_stack() - check the address in the stack > + * @regs: pt_regs which contains kernel stack pointer. > + * @addr: address which is checked. > + * > + * regs_within_kernel_stack() checks @addr is within the kernel stack page(s). > + * If @addr is within the kernel stack, it returns true. If not, returns false. > + */ > + > +static inline bool regs_within_kernel_stack(struct pt_regs *regs, > + unsigned long addr) > +{ > + return ((addr & ~(THREAD_SIZE - 1)) == > + (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1))); > +} Out of curiosity, what is the above meant for ? I'm trying to understand because it will not work with such things as interrupt or softirq stack... > +/** > + * regs_get_kernel_stack_nth() - get Nth entry of the stack > + * @regs: pt_regs which contains kernel stack pointer. > + * @n: stack entry number. > + * > + * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which > + * is specified by @regs. If the @n th entry is NOT in the kernel stack, > + * this returns 0. > + */ > +static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, > + unsigned int n) > +{ > + unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs); > + addr += n; > + if (regs_within_kernel_stack(regs, (unsigned long)addr)) > + return *addr; > + else > + return 0; > +} Is this meant to fetch stack based arguments or do backtraces or similar or does this have a different purpose ? > /* > * These are defined as per linux/ptrace.h, which see. > */ > diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c > index ef14988..e816aba 100644 > --- a/arch/powerpc/kernel/ptrace.c > +++ b/arch/powerpc/kernel/ptrace.c > @@ -39,6 +39,108 @@ > #include <asm/system.h> > > /* > + * The parameter save area on the stack is used to store arguments being passed > + * to callee function and is located at fixed offset from stack pointer. > + */ > +#ifdef CONFIG_PPC32 > +#define PARAMETER_SAVE_AREA_OFFSET 24 /* bytes */ > +#else /* CONFIG_PPC32 */ > +#define PARAMETER_SAVE_AREA_OFFSET 48 /* bytes */ > +#endif > + > +struct pt_regs_offset { > + const char *name; > + int offset; > +}; > + > +#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)} > +#define REG_OFFSET_END {.name = NULL, .offset = 0} > + > +static const struct pt_regs_offset regoffset_table[] = { > + REG_OFFSET_NAME(gpr[0]), > + REG_OFFSET_NAME(gpr[1]), > + REG_OFFSET_NAME(gpr[2]), > + REG_OFFSET_NAME(gpr[3]), > + REG_OFFSET_NAME(gpr[4]), > + REG_OFFSET_NAME(gpr[5]), > + REG_OFFSET_NAME(gpr[6]), > + REG_OFFSET_NAME(gpr[7]), > + REG_OFFSET_NAME(gpr[8]), > + REG_OFFSET_NAME(gpr[9]), > + REG_OFFSET_NAME(gpr[10]), > + REG_OFFSET_NAME(gpr[11]), > + REG_OFFSET_NAME(gpr[12]), > + REG_OFFSET_NAME(gpr[13]), > + REG_OFFSET_NAME(gpr[14]), > + REG_OFFSET_NAME(gpr[15]), > + REG_OFFSET_NAME(gpr[16]), > + REG_OFFSET_NAME(gpr[17]), > + REG_OFFSET_NAME(gpr[18]), > + REG_OFFSET_NAME(gpr[19]), > + REG_OFFSET_NAME(gpr[20]), > + REG_OFFSET_NAME(gpr[21]), > + REG_OFFSET_NAME(gpr[22]), > + REG_OFFSET_NAME(gpr[23]), > + REG_OFFSET_NAME(gpr[24]), > + REG_OFFSET_NAME(gpr[25]), > + REG_OFFSET_NAME(gpr[26]), > + REG_OFFSET_NAME(gpr[27]), > + REG_OFFSET_NAME(gpr[28]), > + REG_OFFSET_NAME(gpr[29]), > + REG_OFFSET_NAME(gpr[30]), > + REG_OFFSET_NAME(gpr[31]), I find it weird that you have the [ an ] in the name ... We usually name these guys gpr0...gpr31 or even r0...r31. Is that name user visible ? Maybe you should use a different macro GPR_OFFSET_NAME(num) that generates both gpr[num] for the offsetof and r##num for the register name. > + REG_OFFSET_NAME(nip), > + REG_OFFSET_NAME(msr), > + REG_OFFSET_NAME(orig_gpr3), > + REG_OFFSET_NAME(ctr), > + REG_OFFSET_NAME(link), > + REG_OFFSET_NAME(xer), > + REG_OFFSET_NAME(ccr), > +#ifdef CONFIG_PPC64 > + REG_OFFSET_NAME(softe), > +#else > + REG_OFFSET_NAME(mq), > +#endif > + REG_OFFSET_NAME(trap), > + REG_OFFSET_NAME(dar), > + REG_OFFSET_NAME(dsisr), > + REG_OFFSET_NAME(result), > + REG_OFFSET_END, > +}; Do you need to expose orig_gpr3 and result there ? Cheers, Ben. ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH -tip tracing/kprobes v2] Powerpc port of the kprobe-based event tracer 2010-01-15 3:13 ` Benjamin Herrenschmidt @ 2010-01-19 7:35 ` Mahesh Jagannath Salgaonkar 0 siblings, 0 replies; 3+ messages in thread From: Mahesh Jagannath Salgaonkar @ 2010-01-19 7:35 UTC (permalink / raw) To: Benjamin Herrenschmidt Cc: linux-kernel, Ingo Molnar, linuxppc-dev, Ananth N Mavinakayanahalli, Michael Neuling, systemtap, Masami Hiramatsu Benjamin Herrenschmidt wrote: > Hi Mahesh ! > Hi Benjamin, >> +/** >> + * regs_within_kernel_stack() - check the address in the stack >> + * @regs: pt_regs which contains kernel stack pointer. >> + * @addr: address which is checked. >> + * >> + * regs_within_kernel_stack() checks @addr is within the kernel stack page(s). >> + * If @addr is within the kernel stack, it returns true. If not, returns false. >> + */ >> + >> +static inline bool regs_within_kernel_stack(struct pt_regs *regs, >> + unsigned long addr) >> +{ >> + return ((addr & ~(THREAD_SIZE - 1)) == >> + (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1))); >> +} > > Out of curiosity, what is the above meant for ? I'm trying to understand > because it will not work with such things as interrupt or softirq > stack... > This function is used to validate whether the given address falls within the stack boundary. This gets invoked through kprobe pre/post handler routine's while fetching nth entry from the stack. Even though it is called in interrupt context, the pt_regs that we are using is in context of kernel routine where the probe was hit. >> +/** >> + * regs_get_kernel_stack_nth() - get Nth entry of the stack >> + * @regs: pt_regs which contains kernel stack pointer. >> + * @n: stack entry number. >> + * >> + * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which >> + * is specified by @regs. If the @n th entry is NOT in the kernel stack, >> + * this returns 0. >> + */ >> +static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, >> + unsigned int n) >> +{ >> + unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs); >> + addr += n; >> + if (regs_within_kernel_stack(regs, (unsigned long)addr)) >> + return *addr; >> + else >> + return 0; >> +} > > Is this meant to fetch stack based arguments or do backtraces or similar > or does this have a different purpose ? > The purpose is to allow kernel developer to fetch/monitor n'th entry on the stack when the probe is hit, through ftrace plugin. It can also be used to fetch stack based arguments. Following is the example how kernel developer may use it to fetch n'th entry from the stack: # echo p:myprobe do_sys_open S1=\$stack1 S2=\$stack2 > /sys/kernel/debug/tracing/kprobe_events # echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable # cat trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | pcscd-4159 [001] 668343.548210: myprobe: (.do_sys_open+0x0/0x1a4) S1=c000000000c29d20 S2=c00000000019d774 pcscd-4159 [001] 668343.548308: myprobe: (.do_sys_open+0x0/0x1a4) S1=c000000000c29d20 S2=c00000000019d774 pcscd-4159 [001] 668343.548331: myprobe: (.do_sys_open+0x0/0x1a4) S1=c000000000c29d20 S2=c0000000001f1f30 pcscd-4159 [001] 668343.548377: myprobe: (.do_sys_open+0x0/0x1a4) S1=c000000000c29d20 S2=c00000000019d774 pcscd-4159 [001] 668343.548399: myprobe: (.do_sys_open+0x0/0x1a4) S1=c000000000c29d20 S2=c00000000019d774 >> /* >> * These are defined as per linux/ptrace.h, which see. >> */ >> diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c >> index ef14988..e816aba 100644 >> --- a/arch/powerpc/kernel/ptrace.c >> +++ b/arch/powerpc/kernel/ptrace.c >> @@ -39,6 +39,108 @@ >> #include <asm/system.h> >> >> /* >> + * The parameter save area on the stack is used to store arguments being passed >> + * to callee function and is located at fixed offset from stack pointer. >> + */ >> +#ifdef CONFIG_PPC32 >> +#define PARAMETER_SAVE_AREA_OFFSET 24 /* bytes */ >> +#else /* CONFIG_PPC32 */ >> +#define PARAMETER_SAVE_AREA_OFFSET 48 /* bytes */ >> +#endif >> + >> +struct pt_regs_offset { >> + const char *name; >> + int offset; >> +}; >> + >> +#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)} >> +#define REG_OFFSET_END {.name = NULL, .offset = 0} >> + >> +static const struct pt_regs_offset regoffset_table[] = { >> + REG_OFFSET_NAME(gpr[0]), >> + REG_OFFSET_NAME(gpr[1]), >> + REG_OFFSET_NAME(gpr[2]), >> + REG_OFFSET_NAME(gpr[3]), >> + REG_OFFSET_NAME(gpr[4]), >> + REG_OFFSET_NAME(gpr[5]), >> + REG_OFFSET_NAME(gpr[6]), >> + REG_OFFSET_NAME(gpr[7]), >> + REG_OFFSET_NAME(gpr[8]), >> + REG_OFFSET_NAME(gpr[9]), >> + REG_OFFSET_NAME(gpr[10]), >> + REG_OFFSET_NAME(gpr[11]), >> + REG_OFFSET_NAME(gpr[12]), >> + REG_OFFSET_NAME(gpr[13]), >> + REG_OFFSET_NAME(gpr[14]), >> + REG_OFFSET_NAME(gpr[15]), >> + REG_OFFSET_NAME(gpr[16]), >> + REG_OFFSET_NAME(gpr[17]), >> + REG_OFFSET_NAME(gpr[18]), >> + REG_OFFSET_NAME(gpr[19]), >> + REG_OFFSET_NAME(gpr[20]), >> + REG_OFFSET_NAME(gpr[21]), >> + REG_OFFSET_NAME(gpr[22]), >> + REG_OFFSET_NAME(gpr[23]), >> + REG_OFFSET_NAME(gpr[24]), >> + REG_OFFSET_NAME(gpr[25]), >> + REG_OFFSET_NAME(gpr[26]), >> + REG_OFFSET_NAME(gpr[27]), >> + REG_OFFSET_NAME(gpr[28]), >> + REG_OFFSET_NAME(gpr[29]), >> + REG_OFFSET_NAME(gpr[30]), >> + REG_OFFSET_NAME(gpr[31]), > > I find it weird that you have the [ an ] in the name ... We usually name > these guys gpr0...gpr31 or even r0...r31. Is that name user visible ? > Maybe you should use a different macro GPR_OFFSET_NAME(num) that > generates both gpr[num] for the offsetof and r##num for the register > name. > Yup, make sense. I will make the change. Will use gpr0...gpr31 to be consistent with pt_regs structure member name "gpr". >> + REG_OFFSET_NAME(nip), >> + REG_OFFSET_NAME(msr), >> + REG_OFFSET_NAME(orig_gpr3), >> + REG_OFFSET_NAME(ctr), >> + REG_OFFSET_NAME(link), >> + REG_OFFSET_NAME(xer), >> + REG_OFFSET_NAME(ccr), >> +#ifdef CONFIG_PPC64 >> + REG_OFFSET_NAME(softe), >> +#else >> + REG_OFFSET_NAME(mq), >> +#endif >> + REG_OFFSET_NAME(trap), >> + REG_OFFSET_NAME(dar), >> + REG_OFFSET_NAME(dsisr), >> + REG_OFFSET_NAME(result), >> + REG_OFFSET_END, >> +}; > > Do you need to expose orig_gpr3 and result there ? > I had included them to give an exact representation of pt_regs structure. However, I am ok with dropping them. > Cheers, > Ben. > > Thanks for reviewing. -Mahesh. ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-01-19 7:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20100111125952.604518521@mars.in.ibm.com>
2010-01-11 13:03 ` [PATCH -tip tracing/kprobes v2] Powerpc port of the kprobe-based event tracer Mahesh Salgaonkar
2010-01-15 3:13 ` Benjamin Herrenschmidt
2010-01-19 7:35 ` Mahesh Jagannath Salgaonkar
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).