From: Masami Hiramatsu <mhiramat@redhat.com>
To: Frederic Weisbecker <fweisbec@gmail.com>,
Ingo Molnar <mingo@elte.hu>,
Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
lkml<linux-kernel@vger.kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
Ingo Molnar <mingo@elte.hu>,
Jim Keniston <jkenisto@us.ibm.com>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>,
Christoph Hellwig <hch@infradead.org>,
Steven Rostedt <rostedt@goodmis.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
"H. Peter Anvin" <hpa@zytor.com>,
Anders Kaseorg <andersk@ksplice.com>,
Tim Abbott <tabbott@ksplice.com>,
Andi Kleen <andi@firstfloor.org>,
Jason Baron <jbaron@redhat.com>,
Mathieu Desnoyers <compudj@krystal.dyndns.org>,
systemtap<systemtap@sources.redhat.com>,
DLE<dle-develop@lists.sourceforge.net>
Subject: [PATCH -tip v10 6/9] kprobes/x86: Cleanup save/restore registers
Date: Thu, 18 Feb 2010 22:07:00 -0000 [thread overview]
Message-ID: <20100218221336.19637.83293.stgit@dhcp-100-2-132.bos.redhat.com> (raw)
In-Reply-To: <20100218221247.19637.80088.stgit@dhcp-100-2-132.bos.redhat.com>
Introduce SAVE/RESOTRE_REGS_STRING for cleanup kretprobe-trampoline asm
code. These macros will be used for emulating interruption.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Anders Kaseorg <andersk@ksplice.com>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
---
arch/x86/kernel/kprobes.c | 128 ++++++++++++++++++++++++---------------------
1 files changed, 67 insertions(+), 61 deletions(-)
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index c69bb65..4ae95be 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -554,6 +554,69 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
return 0;
}
+#ifdef CONFIG_X86_64
+#define SAVE_REGS_STRING \
+ /* Skip cs, ip, orig_ax. */ \
+ " subq $24, %rsp\n" \
+ " pushq %rdi\n" \
+ " pushq %rsi\n" \
+ " pushq %rdx\n" \
+ " pushq %rcx\n" \
+ " pushq %rax\n" \
+ " pushq %r8\n" \
+ " pushq %r9\n" \
+ " pushq %r10\n" \
+ " pushq %r11\n" \
+ " pushq %rbx\n" \
+ " pushq %rbp\n" \
+ " pushq %r12\n" \
+ " pushq %r13\n" \
+ " pushq %r14\n" \
+ " pushq %r15\n"
+#define RESTORE_REGS_STRING \
+ " popq %r15\n" \
+ " popq %r14\n" \
+ " popq %r13\n" \
+ " popq %r12\n" \
+ " popq %rbp\n" \
+ " popq %rbx\n" \
+ " popq %r11\n" \
+ " popq %r10\n" \
+ " popq %r9\n" \
+ " popq %r8\n" \
+ " popq %rax\n" \
+ " popq %rcx\n" \
+ " popq %rdx\n" \
+ " popq %rsi\n" \
+ " popq %rdi\n" \
+ /* Skip orig_ax, ip, cs */ \
+ " addq $24, %rsp\n"
+#else
+#define SAVE_REGS_STRING \
+ /* Skip cs, ip, orig_ax and gs. */ \
+ " subl $16, %esp\n" \
+ " pushl %fs\n" \
+ " pushl %ds\n" \
+ " pushl %es\n" \
+ " pushl %eax\n" \
+ " pushl %ebp\n" \
+ " pushl %edi\n" \
+ " pushl %esi\n" \
+ " pushl %edx\n" \
+ " pushl %ecx\n" \
+ " pushl %ebx\n"
+#define RESTORE_REGS_STRING \
+ " popl %ebx\n" \
+ " popl %ecx\n" \
+ " popl %edx\n" \
+ " popl %esi\n" \
+ " popl %edi\n" \
+ " popl %ebp\n" \
+ " popl %eax\n" \
+ /* Skip ds, es, fs, gs, orig_ax, and ip. Note: don't pop cs here*/\
+ " addl $24, %esp\n"
+#endif
+
/*
* When a retprobed function returns, this code saves registers and
* calls trampoline_handler() runs, which calls the kretprobe's handler.
@@ -567,65 +630,16 @@ static void __used __kprobes kretprobe_trampoline_holder(void)
/* We don't bother saving the ss register */
" pushq %rsp\n"
" pushfq\n"
- /*
- * Skip cs, ip, orig_ax.
- * trampoline_handler() will plug in these values
- */
- " subq $24, %rsp\n"
- " pushq %rdi\n"
- " pushq %rsi\n"
- " pushq %rdx\n"
- " pushq %rcx\n"
- " pushq %rax\n"
- " pushq %r8\n"
- " pushq %r9\n"
- " pushq %r10\n"
- " pushq %r11\n"
- " pushq %rbx\n"
- " pushq %rbp\n"
- " pushq %r12\n"
- " pushq %r13\n"
- " pushq %r14\n"
- " pushq %r15\n"
+ SAVE_REGS_STRING
" movq %rsp, %rdi\n"
" call trampoline_handler\n"
/* Replace saved sp with true return address. */
" movq %rax, 152(%rsp)\n"
- " popq %r15\n"
- " popq %r14\n"
- " popq %r13\n"
- " popq %r12\n"
- " popq %rbp\n"
- " popq %rbx\n"
- " popq %r11\n"
- " popq %r10\n"
- " popq %r9\n"
- " popq %r8\n"
- " popq %rax\n"
- " popq %rcx\n"
- " popq %rdx\n"
- " popq %rsi\n"
- " popq %rdi\n"
- /* Skip orig_ax, ip, cs */
- " addq $24, %rsp\n"
+ RESTORE_REGS_STRING
" popfq\n"
#else
" pushf\n"
- /*
- * Skip cs, ip, orig_ax and gs.
- * trampoline_handler() will plug in these values
- */
- " subl $16, %esp\n"
- " pushl %fs\n"
- " pushl %es\n"
- " pushl %ds\n"
- " pushl %eax\n"
- " pushl %ebp\n"
- " pushl %edi\n"
- " pushl %esi\n"
- " pushl %edx\n"
- " pushl %ecx\n"
- " pushl %ebx\n"
+ SAVE_REGS_STRING
" movl %esp, %eax\n"
" call trampoline_handler\n"
/* Move flags to cs */
@@ -633,15 +647,7 @@ static void __used __kprobes kretprobe_trampoline_holder(void)
" movl %edx, 52(%esp)\n"
/* Replace saved flags with true return address. */
" movl %eax, 56(%esp)\n"
- " popl %ebx\n"
- " popl %ecx\n"
- " popl %edx\n"
- " popl %esi\n"
- " popl %edi\n"
- " popl %ebp\n"
- " popl %eax\n"
- /* Skip ds, es, fs, gs, orig_ax and ip */
- " addl $24, %esp\n"
+ RESTORE_REGS_STRING
" popf\n"
#endif
" ret\n");
--
Masami Hiramatsu
Software Engineer
Hitachi Computer Products (America), Inc.
Software Solutions Division
e-mail: mhiramat@redhat.com
next prev parent reply other threads:[~2010-02-18 22:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-18 22:06 [PATCH -tip v10 0/9] kprobes: Kprobes jump optimization support Masami Hiramatsu
2010-02-18 22:06 ` [PATCH -tip v10 2/9] kprobes: Introduce generic insn_slot framework Masami Hiramatsu
2010-02-18 22:06 ` [PATCH -tip v10 4/9] kprobes: Jump optimization sysctl interface Masami Hiramatsu
2010-02-18 22:06 ` [PATCH -tip v10 1/9] kprobes/x86: Cleanup RELATIVEJUMP_INSTRUCTION to RELATIVEJUMP_OPCODE Masami Hiramatsu
2010-02-18 22:06 ` [PATCH -tip v10 5/9] kprobes/x86: Boost probes when reentering Masami Hiramatsu
2010-02-18 22:06 ` [PATCH -tip v10 3/9] kprobes: Introduce kprobes jump optimization Masami Hiramatsu
2010-02-18 22:07 ` [PATCH -tip v10 7/9] x86: Add text_poke_smp for SMP cross modifying code Masami Hiramatsu
2010-02-18 22:07 ` [PATCH -tip v10 8/9] kprobes/x86: Support kprobes jump optimization on x86 Masami Hiramatsu
2010-02-18 22:07 ` Masami Hiramatsu [this message]
2010-02-18 22:07 ` [PATCH -tip v10 9/9] kprobes: Add documents of jump optimization Masami Hiramatsu
2010-02-22 23:14 ` [PATCH -tip v10 0/9] kprobes: Kprobes jump optimization support Masami Hiramatsu
2010-02-23 17:05 ` Frederic Weisbecker
2010-02-23 17:07 ` Steven Rostedt
2010-02-23 22:28 ` Masami Hiramatsu
2010-02-24 13:41 ` Masami Hiramatsu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100218221336.19637.83293.stgit@dhcp-100-2-132.bos.redhat.com \
--to=mhiramat@redhat.com \
--cc=ananth@in.ibm.com \
--cc=andersk@ksplice.com \
--cc=andi@firstfloor.org \
--cc=compudj@krystal.dyndns.org \
--cc=dle-develop@lists.sourceforge.net \
--cc=fweisbec@gmail.com \
--cc=hch@infradead.org \
--cc=hpa@zytor.com \
--cc=jbaron@redhat.com \
--cc=jkenisto@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rostedt@goodmis.org \
--cc=srikar@linux.vnet.ibm.com \
--cc=systemtap@sources.redhat.com \
--cc=tabbott@ksplice.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).