Re: [PATCH v2] gdb, gdbserver: Add missing install-dvi Makefile target

Re: [PATCH v2] gdb, gdbserver: Add missing install-dvi Makefile target

[Luis Machado]

On 4/10/24 11:02, Christophe Lyon wrote:
> On Wed, 10 Apr 2024 at 10:10, Christophe Lyon
> <christophe.lyon@linaro.org> wrote:
>>
>> On Wed, 10 Apr 2024 at 01:00, Luis Machado <luis.machado@arm.com> wrote:
>>>
>>> On 4/7/24 20:10, Christophe Lyon wrote:
>>>> For some reason install-dvi is missing although other targets of the
>>>> same family are present. This looks like an oversight.
>>>>
>>>> This enables calling 'make install-dvi' from the top-level build
>>>> directory.
>>>>
>>>> Fix what looks like another oversight: include 'pdf' in 'all-doc' in
>>>> gdb/doc/Makefile.in.
>>>> ---
>>>>  gdb/Makefile.in                |  2 +-
>>>>  gdb/data-directory/Makefile.in |  2 +-
>>>>  gdb/doc/Makefile.in            | 19 +++++++++++++++++--
>>>>  gdb/testsuite/Makefile.in      |  1 +
>>>>  gdbserver/Makefile.in          |  1 +
>>>>  5 files changed, 21 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/gdb/Makefile.in b/gdb/Makefile.in
>>>> index 40732cb2227..d001359539a 100644
>>>> --- a/gdb/Makefile.in
>>>> +++ b/gdb/Makefile.in
>>>> @@ -2035,7 +2035,7 @@ check-headers:
>>>>       done
>>>>  .PHONY: check-headers
>>>>
>>>> -info install-info clean-info dvi pdf install-pdf html install-html: force
>>>> +info install-info clean-info dvi install-dvi pdf install-pdf html install-html: force
>>>>       @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
>>>>
>>>>  # Traditionally "install" depends on "all".  But it may be useful
>>>> diff --git a/gdb/data-directory/Makefile.in b/gdb/data-directory/Makefile.in
>>>> index 2a40be4ade0..2db8706eba6 100644
>>>> --- a/gdb/data-directory/Makefile.in
>>>> +++ b/gdb/data-directory/Makefile.in
>>>> @@ -422,7 +422,7 @@ maintainer-clean realclean distclean: clean
>>>>  .PHONY: install-info install-pdf install-html clean-info
>>>>  check installcheck:
>>>>  info dvi pdf html:
>>>> -install-info install-pdf install-html:
>>>> +install-info install-dvi install-pdf install-html:
>>>>  clean-info:
>>>>
>>>>  # GNU Make has an annoying habit of putting *all* the Makefile variables
>>>> diff --git a/gdb/doc/Makefile.in b/gdb/doc/Makefile.in
>>>> index 04f9dbd27f0..8007f6373d4 100644
>>>> --- a/gdb/doc/Makefile.in
>>>> +++ b/gdb/doc/Makefile.in
>>>> @@ -24,6 +24,7 @@ prefix = @prefix@
>>>>  infodir = @infodir@
>>>>  datarootdir = @datarootdir@
>>>>  docdir = @docdir@
>>>> +dvidir = @dvidir@
>>>>  pdfdir = @pdfdir@
>>>>  htmldir = @htmldir@
>>>>  mandir = @mandir@
>>>> @@ -87,6 +88,8 @@ SET_TEXINPUTS = \
>>>>  # Files which should be generated via 'info' and installed by 'install-info'
>>>>  INFO_DEPS = gdb.info stabs.info annotate.info
>>>>
>>>> +# Files which should be generated via 'dvi' and installed by 'install-dvi'
>>>> +DVIFILES = gdb.dvi stabs.dvi refcard.dvi annotate.dvi
>>>>  # Files which should be generated via 'pdf' and installed by 'install-pdf'
>>>>  PDFFILES = gdb.pdf stabs.pdf refcard.pdf annotate.pdf
>>>>  # Files which should be generated via 'html' and installed by 'install-html'
>>>> @@ -191,7 +194,7 @@ HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
>>>>  all: info
>>>>
>>>>  info: $(INFO_DEPS)
>>>> -dvi: gdb.dvi stabs.dvi refcard.dvi annotate.dvi
>>>> +dvi: $(DVIFILES)
>>>>  ps: gdb.ps stabs.ps refcard.ps annotate.ps
>>>>  html: $(HTMLFILES)
>>>>  pdf: $(PDFFILES)
>>>> @@ -233,7 +236,7 @@ Doxyfile-gdb-xref:        $(srcdir)/Doxyfile-gdb-xref.in
>>>>  Doxyfile-gdbserver:  $(srcdir)/Doxyfile-gdbserver.in
>>>>       $(doxyedit) $(srcdir)/Doxyfile-gdbserver.in >Doxyfile-gdbserver
>>>>
>>>> -all-doc: info dvi ps # pdf
>>>> +all-doc: info dvi ps pdf
>>>>  diststuff: info man
>>>>       rm -f gdb-cfg.texi
>>>>
>>>> @@ -293,6 +296,18 @@ install-html: $(HTMLFILES)
>>>>         fi; \
>>>>       done
>>>>
>>>> +dvi__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
>>>> +
>>>> +install-dvi: $(DVIFILES)
>>>> +     @$(NORMAL_INSTALL)
>>>> +     test -z "$(dvidir)" || $(mkinstalldirs) "$(DESTDIR)$(dvidir)"
>>>> +     @list='$(DVIFILES)'; for p in $$list; do \
>>>> +       if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>>>> +       f=$(dvi__strip_dir) \
>>>> +       echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \
>>>> +       $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \
>>>> +     done
>>>> +
>>>>  pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
>>>>
>>>>  install-pdf: $(PDFFILES)
>>>> diff --git a/gdb/testsuite/Makefile.in b/gdb/testsuite/Makefile.in
>>>> index f6603daf7fd..f799f16c2bb 100644
>>>> --- a/gdb/testsuite/Makefile.in
>>>> +++ b/gdb/testsuite/Makefile.in
>>>> @@ -105,6 +105,7 @@ INFODIRS=doc
>>>>  info:
>>>>  install-info:
>>>>  dvi:
>>>> +install-dvi:
>>>>  pdf:
>>>>  install-pdf:
>>>>  html:
>>>> diff --git a/gdbserver/Makefile.in b/gdbserver/Makefile.in
>>>> index d12f8746611..4eed8926f48 100644
>>>> --- a/gdbserver/Makefile.in
>>>> +++ b/gdbserver/Makefile.in
>>>> @@ -342,6 +342,7 @@ installcheck:
>>>>  check:
>>>>  info dvi pdf:
>>>>  install-info:
>>>> +install-dvi:
>>>>  install-pdf:
>>>>  html:
>>>>  install-html:
>>>
>>> I gave this a try and install-dvi almost fully works from the top level, though it still fails for gprofng.
>>>
>>> Maybe something for the binutils folks? Otherwise this part looks OK to me.
>>
>> Thanks for checking. Yes IIUC gprofng is part of binutils, and I
>> didn't notice because we don't build it ;-)
>>
> This patch should fix it:
> https://sourceware.org/pipermail/binutils/2024-April/133528.html

Indeed. I suppose the libdecnumber install-dvi failure will have to be addressed by the master copy.

In any case, this looks good. Thanks for fixing it.

Approved-By: Luis Machado <luis.machado@arm.com>
Tested-By: Luis Machado <luis.machado@arm.com>