* Re: [PATCH] x86: Intel syntax disallowed use of certain symbols
[not found] <s224800f.020@emea1-mh.id2.novell.com>
@ 2005-03-01 21:54 ` Alan Modra
0 siblings, 0 replies; 4+ messages in thread
From: Alan Modra @ 2005-03-01 21:54 UTC (permalink / raw)
To: Jan Beulich; +Cc: binutils
On Tue, Mar 01, 2005 at 03:45:51PM +0100, Jan Beulich wrote:
> >>> Alan Modra <amodra@bigpond.net.au> 01.03.05 13:11:54 >>>
> >On Tue, Mar 01, 2005 at 09:56:45AM +0100, Jan Beulich wrote:
> >> * config/tc-i386.c (intel_e11): If not followed by T_PTR, treat
> T_BYTE
> >> etc. like normal symbol references (T_ID).
> >
> >OK, but..
> >
> >> * gas/i386/intelok.d: Add -r to objdump options. Adjust
> expectations.
> >
> >Please test this on i686-aout and i686-coff targets and adjust relocs
> to
> >suit all targets.
>
> Changes below/attached. I'm not sure if in such a case it is OK to
> apply without another approval - please let me know.
Yes, it is OK.
--
Alan Modra
IBM OzLabs - Linux Technology Centre
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] x86: Intel syntax disallowed use of certain symbols
@ 2005-03-01 14:46 Jan Beulich
0 siblings, 0 replies; 4+ messages in thread
From: Jan Beulich @ 2005-03-01 14:46 UTC (permalink / raw)
To: amodra; +Cc: binutils
[-- Attachment #1: Type: text/plain, Size: 4996 bytes --]
>>> Alan Modra <amodra@bigpond.net.au> 01.03.05 13:11:54 >>>
>On Tue, Mar 01, 2005 at 09:56:45AM +0100, Jan Beulich wrote:
>> * config/tc-i386.c (intel_e11): If not followed by T_PTR, treat
T_BYTE
>> etc. like normal symbol references (T_ID).
>
>OK, but..
>
>> * gas/i386/intelok.d: Add -r to objdump options. Adjust
expectations.
>
>Please test this on i686-aout and i686-coff targets and adjust relocs
to
>suit all targets.
Changes below/attached. I'm not sure if in such a case it is OK to
apply without another approval - please let me know.
Re-tested on i686-pc-linux-gnu and as cross tools for i686-aout and
i686-coff.
Jan
gas/
2005-03-01 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e11): If not followed by T_PTR, treat
T_BYTE
etc. like normal symbol references (T_ID).
gas/testsuite/
2005-03-01 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Add -r to objdump options. Adjust
expectations.
* gas/i386/intelok.s: Add checks for various special memory
operands.
---
/home/jbeulich/src/binutils/mainline/2005-02-28/gas/config/tc-i386.c 2005-02-01
16:15:56.000000000 +0100
+++ 2005-02-28/gas/config/tc-i386.c 2005-02-28 17:42:09.000000000
+0100
@@ -6154,6 +6162,23 @@ intel_e11 ()
{
intel_match_token (cur_token.code);
+ if (cur_token.code != T_PTR)
+ {
+ /* It must have been an identifier; add it to the displacement
string. */
+ strcat (intel_parser.disp, prev_token.str);
+
+ /* The identifier represents a memory reference only if it's
not
+ preceded by an offset modifier and if it's not an equate.
*/
+ if (intel_parser.op_modifier != T_OFFSET)
+ {
+ symbolS *symbolP;
+
+ symbolP = symbol_find(prev_token.str);
+ if (!symbolP || S_GET_SEGMENT(symbolP) !=
absolute_section)
+ intel_parser.is_mem = 1;
+ }
+ }
+
return 1;
}
---
/home/jbeulich/src/binutils/mainline/2005-02-28/gas/testsuite/gas/i386/intelok.d 2005-02-08
13:56:14.000000000 +0100
+++ 2005-02-28/gas/testsuite/gas/i386/intelok.d 2005-03-01
09:38:13.305824976 +0100
@@ -1,5 +1,5 @@
#as: -J
-#objdump: -dwMintel
+#objdump: -drwMintel
#name: i386 intel-ok
.*: +file format .*
@@ -93,6 +93,20 @@ Disassembly of section .text:
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR
)?(ds:)?\[ebx\])
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR
)?(ds:)?\[ebx\])
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR
)?(ds:)?\[ebx\])
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+byte
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+byte
+[ ]*[0-9a-f]+: 8b 40 04[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+4\]
+[ ]*[0-9a-f]+: 8b 40 04[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+4\]
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+fword
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+fword
+[ ]*[0-9a-f]+: 8b 80 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+qword
+[ ]*[0-9a-f]+: 8b 80 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+qword
+[ ]*[0-9a-f]+: 8b 80 08 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+8\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+tbyte
+[ ]*[0-9a-f]+: 8b 80 08 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+8\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+tbyte
+#[ ]*[0-9a-f]+: 8b 04 85 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\*4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+word
+#[ ]*[0-9a-f]+: 8b 04 85 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\*4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+word
+#[ ]*[0-9a-f]+: 8b 04 85 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\*4\+4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[
]+xmmword
+#[ ]*[0-9a-f]+: 8b 04 85 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\*4\+4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[
]+xmmword
[ ]*[0-9a-f]+: 6a 01[ ]+push[ ]+0x1
[ ]*[0-9a-f]+: 6a ff[ ]+push[ ]+0xffffffff
[ ]*[0-9a-f]+: 6a fe[ ]+push[ ]+0xfffffffe
---
/home/jbeulich/src/binutils/mainline/2005-02-28/gas/testsuite/gas/i386/intelok.s 2005-02-08
13:56:39.000000000 +0100
+++ 2005-02-28/gas/testsuite/gas/i386/intelok.s 2005-03-01
09:31:11.807902400 +0100
@@ -1,6 +1,10 @@
.intel_syntax noprefix
+ .equiv dword, 4
.text
start:
+
+ # operand sizes
+
add al, [eax]
add al, byte ptr [eax]
add ax, [eax]
@@ -88,6 +92,23 @@ start:
xlat byte ptr [ebx]
xlatb
+ # memory operands
+
+ mov eax, dword ptr [byte+eax]
+ mov eax, dword ptr byte[eax]
+ mov eax, [dword+eax]
+ mov eax, dword[eax]
+ mov eax, [fword+eax]
+ mov eax, fword[eax]
+ mov eax, [qword+eax+dword]
+ mov eax, qword[eax+dword]
+ mov eax, [tbyte+eax+dword*2]
+ mov eax, tbyte[eax+dword*2]
+# mov eax, [word+eax*dword]
+# mov eax, word[eax*dword]
+# mov eax, [xmmword+(eax+1)*dword]
+# mov eax, xmmword[(eax+1)*dword]
+
# expressions
push + 1
[-- Attachment #2: binutils-mainline-x86-intel-equ.patch --]
[-- Type: text/plain, Size: 4681 bytes --]
Intel syntax mode prevented the use of identifiers like 'dword', 'word', etc.
in memory operands; MASM really has these symbols predefined (which I may
provide a patch for later); this patch at least allows equating these symbols
to the MASM-defined values for compatibility.
Built and tested on i686-pc-linux-gnu.
Jan
gas/
2005-03-01 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
etc. like normal symbol references (T_ID).
gas/testsuite/
2005-03-01 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Add -r to objdump options. Adjust expectations.
* gas/i386/intelok.s: Add checks for various special memory operands.
--- /home/jbeulich/src/binutils/mainline/2005-02-28/gas/config/tc-i386.c 2005-02-01 16:15:56.000000000 +0100
+++ 2005-02-28/gas/config/tc-i386.c 2005-02-28 17:42:09.000000000 +0100
@@ -6154,6 +6162,23 @@ intel_e11 ()
{
intel_match_token (cur_token.code);
+ if (cur_token.code != T_PTR)
+ {
+ /* It must have been an identifier; add it to the displacement string. */
+ strcat (intel_parser.disp, prev_token.str);
+
+ /* The identifier represents a memory reference only if it's not
+ preceded by an offset modifier and if it's not an equate. */
+ if (intel_parser.op_modifier != T_OFFSET)
+ {
+ symbolS *symbolP;
+
+ symbolP = symbol_find(prev_token.str);
+ if (!symbolP || S_GET_SEGMENT(symbolP) != absolute_section)
+ intel_parser.is_mem = 1;
+ }
+ }
+
return 1;
}
--- /home/jbeulich/src/binutils/mainline/2005-02-28/gas/testsuite/gas/i386/intelok.d 2005-02-08 13:56:14.000000000 +0100
+++ 2005-02-28/gas/testsuite/gas/i386/intelok.d 2005-03-01 09:38:13.305824976 +0100
@@ -1,5 +1,5 @@
#as: -J
-#objdump: -dwMintel
+#objdump: -drwMintel
#name: i386 intel-ok
.*: +file format .*
@@ -93,6 +93,20 @@ Disassembly of section .text:
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR )?(ds:)?\[ebx\])
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR )?(ds:)?\[ebx\])
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR )?(ds:)?\[ebx\])
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+byte
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+byte
+[ ]*[0-9a-f]+: 8b 40 04[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+4\]
+[ ]*[0-9a-f]+: 8b 40 04[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+4\]
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+fword
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+fword
+[ ]*[0-9a-f]+: 8b 80 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+qword
+[ ]*[0-9a-f]+: 8b 80 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+qword
+[ ]*[0-9a-f]+: 8b 80 08 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+8\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+tbyte
+[ ]*[0-9a-f]+: 8b 80 08 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+8\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+tbyte
+#[ ]*[0-9a-f]+: 8b 04 85 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\*4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+word
+#[ ]*[0-9a-f]+: 8b 04 85 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\*4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+word
+#[ ]*[0-9a-f]+: 8b 04 85 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\*4\+4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+xmmword
+#[ ]*[0-9a-f]+: 8b 04 85 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\*4\+4\][ ]+[0-9a-f]+:[ ]+(R_386_|dir)?32[ ]+xmmword
[ ]*[0-9a-f]+: 6a 01[ ]+push[ ]+0x1
[ ]*[0-9a-f]+: 6a ff[ ]+push[ ]+0xffffffff
[ ]*[0-9a-f]+: 6a fe[ ]+push[ ]+0xfffffffe
--- /home/jbeulich/src/binutils/mainline/2005-02-28/gas/testsuite/gas/i386/intelok.s 2005-02-08 13:56:39.000000000 +0100
+++ 2005-02-28/gas/testsuite/gas/i386/intelok.s 2005-03-01 09:31:11.807902400 +0100
@@ -1,6 +1,10 @@
.intel_syntax noprefix
+ .equiv dword, 4
.text
start:
+
+ # operand sizes
+
add al, [eax]
add al, byte ptr [eax]
add ax, [eax]
@@ -88,6 +92,23 @@ start:
xlat byte ptr [ebx]
xlatb
+ # memory operands
+
+ mov eax, dword ptr [byte+eax]
+ mov eax, dword ptr byte[eax]
+ mov eax, [dword+eax]
+ mov eax, dword[eax]
+ mov eax, [fword+eax]
+ mov eax, fword[eax]
+ mov eax, [qword+eax+dword]
+ mov eax, qword[eax+dword]
+ mov eax, [tbyte+eax+dword*2]
+ mov eax, tbyte[eax+dword*2]
+# mov eax, [word+eax*dword]
+# mov eax, word[eax*dword]
+# mov eax, [xmmword+(eax+1)*dword]
+# mov eax, xmmword[(eax+1)*dword]
+
# expressions
push + 1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] x86: Intel syntax disallowed use of certain symbols
2005-03-01 8:57 Jan Beulich
@ 2005-03-01 12:11 ` Alan Modra
0 siblings, 0 replies; 4+ messages in thread
From: Alan Modra @ 2005-03-01 12:11 UTC (permalink / raw)
To: Jan Beulich; +Cc: binutils
On Tue, Mar 01, 2005 at 09:56:45AM +0100, Jan Beulich wrote:
> * config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
> etc. like normal symbol references (T_ID).
OK, but..
> * gas/i386/intelok.d: Add -r to objdump options. Adjust expectations.
Please test this on i686-aout and i686-coff targets and adjust relocs to
suit all targets.
--
Alan Modra
IBM OzLabs - Linux Technology Centre
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] x86: Intel syntax disallowed use of certain symbols
@ 2005-03-01 8:57 Jan Beulich
2005-03-01 12:11 ` Alan Modra
0 siblings, 1 reply; 4+ messages in thread
From: Jan Beulich @ 2005-03-01 8:57 UTC (permalink / raw)
To: binutils
[-- Attachment #1: Type: text/plain, Size: 4598 bytes --]
Intel syntax mode prevented the use of identifiers like 'dword', 'word',
etc.
in memory operands; MASM really has these symbols predefined (which I
may
provide a patch for later); this patch at least allows equating these
symbols
to the MASM-defined values for compatibility.
Built and tested on i686-pc-linux-gnu.
Jan
gas/
2005-03-01 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e11): If not followed by T_PTR, treat
T_BYTE
etc. like normal symbol references (T_ID).
gas/testsuite/
2005-03-01 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Add -r to objdump options. Adjust
expectations.
* gas/i386/intelok.s: Add checks for various special memory
operands.
---
/home/jbeulich/src/binutils/mainline/2005-02-28/gas/config/tc-i386.c 2005-02-01
16:15:56.000000000 +0100
+++ 2005-02-28/gas/config/tc-i386.c 2005-02-28 17:42:09.000000000
+0100
@@ -6154,6 +6162,23 @@ intel_e11 ()
{
intel_match_token (cur_token.code);
+ if (cur_token.code != T_PTR)
+ {
+ /* It must have been an identifier; add it to the displacement
string. */
+ strcat (intel_parser.disp, prev_token.str);
+
+ /* The identifier represents a memory reference only if it's
not
+ preceded by an offset modifier and if it's not an equate.
*/
+ if (intel_parser.op_modifier != T_OFFSET)
+ {
+ symbolS *symbolP;
+
+ symbolP = symbol_find(prev_token.str);
+ if (!symbolP || S_GET_SEGMENT(symbolP) !=
absolute_section)
+ intel_parser.is_mem = 1;
+ }
+ }
+
return 1;
}
---
/home/jbeulich/src/binutils/mainline/2005-02-28/gas/testsuite/gas/i386/intelok.d 2005-02-08
13:56:14.000000000 +0100
+++ 2005-02-28/gas/testsuite/gas/i386/intelok.d 2005-03-01
09:38:13.305824976 +0100
@@ -1,5 +1,5 @@
#as: -J
-#objdump: -dwMintel
+#objdump: -drwMintel
#name: i386 intel-ok
.*: +file format .*
@@ -93,6 +93,20 @@ Disassembly of section .text:
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR
)?(ds:)?\[ebx\])
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR
)?(ds:)?\[ebx\])
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR
)?(ds:)?\[ebx\])
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+byte
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+byte
+[ ]*[0-9a-f]+: 8b 40 04[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+4\]
+[ ]*[0-9a-f]+: 8b 40 04[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+4\]
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+fword
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+fword
+[ ]*[0-9a-f]+: 8b 80 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+qword
+[ ]*[0-9a-f]+: 8b 80 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+qword
+[ ]*[0-9a-f]+: 8b 80 08 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+8\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+tbyte
+[ ]*[0-9a-f]+: 8b 80 08 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\+8\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+tbyte
+#[ ]*[0-9a-f]+: 8b 04 85 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\*4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+word
+#[ ]*[0-9a-f]+: 8b 04 85 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\*4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+word
+#[ ]*[0-9a-f]+: 8b 04 85 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\*4\+4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+xmmword
+#[ ]*[0-9a-f]+: 8b 04 85 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR
)?\[eax\*4\+4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+xmmword
[ ]*[0-9a-f]+: 6a 01[ ]+push[ ]+0x1
[ ]*[0-9a-f]+: 6a ff[ ]+push[ ]+0xffffffff
[ ]*[0-9a-f]+: 6a fe[ ]+push[ ]+0xfffffffe
---
/home/jbeulich/src/binutils/mainline/2005-02-28/gas/testsuite/gas/i386/intelok.s 2005-02-08
13:56:39.000000000 +0100
+++ 2005-02-28/gas/testsuite/gas/i386/intelok.s 2005-03-01
09:31:11.807902400 +0100
@@ -1,6 +1,10 @@
.intel_syntax noprefix
+ .equiv dword, 4
.text
start:
+
+ # operand sizes
+
add al, [eax]
add al, byte ptr [eax]
add ax, [eax]
@@ -88,6 +92,23 @@ start:
xlat byte ptr [ebx]
xlatb
+ # memory operands
+
+ mov eax, dword ptr [byte+eax]
+ mov eax, dword ptr byte[eax]
+ mov eax, [dword+eax]
+ mov eax, dword[eax]
+ mov eax, [fword+eax]
+ mov eax, fword[eax]
+ mov eax, [qword+eax+dword]
+ mov eax, qword[eax+dword]
+ mov eax, [tbyte+eax+dword*2]
+ mov eax, tbyte[eax+dword*2]
+# mov eax, [word+eax*dword]
+# mov eax, word[eax*dword]
+# mov eax, [xmmword+(eax+1)*dword]
+# mov eax, xmmword[(eax+1)*dword]
+
# expressions
push + 1
[-- Attachment #2: binutils-mainline-x86-intel-equ.patch --]
[-- Type: text/plain, Size: 4597 bytes --]
Intel syntax mode prevented the use of identifiers like 'dword', 'word', etc.
in memory operands; MASM really has these symbols predefined (which I may
provide a patch for later); this patch at least allows equating these symbols
to the MASM-defined values for compatibility.
Built and tested on i686-pc-linux-gnu.
Jan
gas/
2005-03-01 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
etc. like normal symbol references (T_ID).
gas/testsuite/
2005-03-01 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Add -r to objdump options. Adjust expectations.
* gas/i386/intelok.s: Add checks for various special memory operands.
--- /home/jbeulich/src/binutils/mainline/2005-02-28/gas/config/tc-i386.c 2005-02-01 16:15:56.000000000 +0100
+++ 2005-02-28/gas/config/tc-i386.c 2005-02-28 17:42:09.000000000 +0100
@@ -6154,6 +6162,23 @@ intel_e11 ()
{
intel_match_token (cur_token.code);
+ if (cur_token.code != T_PTR)
+ {
+ /* It must have been an identifier; add it to the displacement string. */
+ strcat (intel_parser.disp, prev_token.str);
+
+ /* The identifier represents a memory reference only if it's not
+ preceded by an offset modifier and if it's not an equate. */
+ if (intel_parser.op_modifier != T_OFFSET)
+ {
+ symbolS *symbolP;
+
+ symbolP = symbol_find(prev_token.str);
+ if (!symbolP || S_GET_SEGMENT(symbolP) != absolute_section)
+ intel_parser.is_mem = 1;
+ }
+ }
+
return 1;
}
--- /home/jbeulich/src/binutils/mainline/2005-02-28/gas/testsuite/gas/i386/intelok.d 2005-02-08 13:56:14.000000000 +0100
+++ 2005-02-28/gas/testsuite/gas/i386/intelok.d 2005-03-01 09:38:13.305824976 +0100
@@ -1,5 +1,5 @@
#as: -J
-#objdump: -dwMintel
+#objdump: -drwMintel
#name: i386 intel-ok
.*: +file format .*
@@ -93,6 +93,20 @@ Disassembly of section .text:
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR )?(ds:)?\[ebx\])
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR )?(ds:)?\[ebx\])
[ ]*[0-9a-f]+: d7[ ]+xlat(b|[ ]+(BYTE PTR )?(ds:)?\[ebx\])
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+byte
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+byte
+[ ]*[0-9a-f]+: 8b 40 04[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+4\]
+[ ]*[0-9a-f]+: 8b 40 04[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+4\]
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+fword
+[ ]*[0-9a-f]+: 8b 80 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+fword
+[ ]*[0-9a-f]+: 8b 80 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+qword
+[ ]*[0-9a-f]+: 8b 80 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+qword
+[ ]*[0-9a-f]+: 8b 80 08 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+8\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+tbyte
+[ ]*[0-9a-f]+: 8b 80 08 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\+8\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+tbyte
+#[ ]*[0-9a-f]+: 8b 04 85 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\*4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+word
+#[ ]*[0-9a-f]+: 8b 04 85 00 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\*4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+word
+#[ ]*[0-9a-f]+: 8b 04 85 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\*4\+4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+xmmword
+#[ ]*[0-9a-f]+: 8b 04 85 04 00 00 00[ ]+mov[ ]+eax,(DWORD PTR )?\[eax\*4\+4\][ ]+[0-9a-f]+:[ ]+R_386_32[ ]+xmmword
[ ]*[0-9a-f]+: 6a 01[ ]+push[ ]+0x1
[ ]*[0-9a-f]+: 6a ff[ ]+push[ ]+0xffffffff
[ ]*[0-9a-f]+: 6a fe[ ]+push[ ]+0xfffffffe
--- /home/jbeulich/src/binutils/mainline/2005-02-28/gas/testsuite/gas/i386/intelok.s 2005-02-08 13:56:39.000000000 +0100
+++ 2005-02-28/gas/testsuite/gas/i386/intelok.s 2005-03-01 09:31:11.807902400 +0100
@@ -1,6 +1,10 @@
.intel_syntax noprefix
+ .equiv dword, 4
.text
start:
+
+ # operand sizes
+
add al, [eax]
add al, byte ptr [eax]
add ax, [eax]
@@ -88,6 +92,23 @@ start:
xlat byte ptr [ebx]
xlatb
+ # memory operands
+
+ mov eax, dword ptr [byte+eax]
+ mov eax, dword ptr byte[eax]
+ mov eax, [dword+eax]
+ mov eax, dword[eax]
+ mov eax, [fword+eax]
+ mov eax, fword[eax]
+ mov eax, [qword+eax+dword]
+ mov eax, qword[eax+dword]
+ mov eax, [tbyte+eax+dword*2]
+ mov eax, tbyte[eax+dword*2]
+# mov eax, [word+eax*dword]
+# mov eax, word[eax*dword]
+# mov eax, [xmmword+(eax+1)*dword]
+# mov eax, xmmword[(eax+1)*dword]
+
# expressions
push + 1
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-03-01 21:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <s224800f.020@emea1-mh.id2.novell.com>
2005-03-01 21:54 ` [PATCH] x86: Intel syntax disallowed use of certain symbols Alan Modra
2005-03-01 14:46 Jan Beulich
-- strict thread matches above, loose matches on Subject: below --
2005-03-01 8:57 Jan Beulich
2005-03-01 12:11 ` Alan Modra
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).