From: "H.J. Lu" <hjl.tools@gmail.com>
To: Jan Beulich <jbeulich@suse.com>
Cc: Binutils <binutils@sourceware.org>
Subject: [PATCH v3] x86: Remove libopcodes dependency
Date: Thu, 1 Dec 2022 10:26:51 -0800 [thread overview]
Message-ID: <Y4jx62oUPn2PB3tC@gmail.com> (raw)
In-Reply-To: <8bb7a0f0-5809-af64-7fc8-1aabe1047dc0@suse.com>
On Thu, Dec 01, 2022 at 08:41:28AM +0100, Jan Beulich wrote:
> On 30.11.2022 23:22, H.J. Lu wrote:
> > On Tue, Nov 29, 2022 at 10:58 PM Jan Beulich <jbeulich@suse.com> wrote:
> >> On 30.11.2022 01:06, H.J. Lu wrote:
> >>> On Tue, Nov 29, 2022 at 11:38 AM H.J. Lu <hjl.tools@gmail.com> wrote:
> >>>> On Tue, Nov 29, 2022 at 1:22 AM Jan Beulich <jbeulich@suse.com> wrote:
> >>>>> On 29.11.2022 00:49, H.J. Lu wrote:
> >>>>>> On Thu, Nov 24, 2022 at 2:19 AM Jan Beulich <jbeulich@suse.com> wrote:
> >>>>>>> On 22.11.2022 19:19, H.J. Lu wrote:
> >>>>>>>> --- a/gas/Makefile.am
> >>>>>>>> +++ b/gas/Makefile.am
> >>>>>>>> @@ -446,6 +446,12 @@ development.exp: $(BFDDIR)/development.sh
> >>>>>>>> $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
> >>>>>>>> | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
> >>>>>>>>
> >>>>>>>> +$(srcdir)/../opcodes/i386-init.h $(srcdir)/../opcodes/i386-tbl.h: \
> >>>>>>>> + @MAINT@ $(srcdir)/../opcodes/i386-opc.tbl \
> >>>>>>>> + $(srcdir)/../opcodes/i386-reg.tbl \
> >>>>>>>> + $(srcdir)/../opcodes/i386-opc.h
> >>>>>>>> + cd ../opcodes; make gen-i386-tbl
> >>>>>>>
> >>>>>>> I've made a patch to gas/Makefile.am as you have requested in reply to
> >>>>>>> my series. I will want to put that through some more testing, so I will
> >>>>>>> submit a v3 of that only a little later (and of course only unless you
> >>>>>>> submit a v2 of your patch earlier that I would also end up being okay
> >>>>>>> with). In the course of doing so I noticed a few more issues with your
> >>>>>>> change:
> >>>>>>>
> >>>>>>> For one I don't think you can put @MAINT@ on a continued line, as the
> >>>>>>> line continuation might then be hidden when @MAINT@ expands to #. The
> >>>>>>> list of dependencies wants expressing via a variable, which would then
> >>>>>>> be used immediately after @MAINT@ without any line continuation
> >>>>>>> following.
> >>>>>>
> >>>>>> Fixed.
> >>>>>
> >>>>> No, the same problem is still there. You either need to use a very long
> >>>>> line, or you need to introduce a variable holding the list of prereqs,
> >>>>> like I've done in my series.
> >>>>
> >>>> I got
> >>>>
> >>>> $(srcdir)/../opcodes/i386-init.h $(srcdir)/../opcodes/i386-tbl.h:
> >>>> $(srcdir)/../opcodes/i386-opc.tbl \
> >>>> $(srcdir)/../opcodes/i386-reg.tbl \
> >>>> $(srcdir)/../opcodes/i386-opc.h \
> >>>> $(srcdir)/../opcodes/i386-gen.c
> >>>> $(MAKE) -C ../opcodes gen-i386-tbl
> >>>>
> >>>> and
> >>>>
> >>>> $(srcdir)/../opcodes/i386-init.h $(srcdir)/../opcodes/i386-tbl.h: #
> >>>> $(srcdir)/../opcodes/i386-opc.tbl \
> >>>> $(srcdir)/../opcodes/i386-reg.tbl \
> >>>> $(srcdir)/../opcodes/i386-opc.h \
> >>>> $(srcdir)/../opcodes/i386-gen.c
> >>>> $(MAKE) -C ../opcodes gen-i386-tbl
> >>>>
> >>>> I didn't run into any problems.
> >>>>
> >>>>>>> And then your rule / dependency won't be enough on a "maintainer-clean"
> >>>>>>> tree, i.e. when the generated headers aren't there at all, and when
> >>>>>>> config/.deps/tc-i386.Po is still empty. In that case nothing would
> >>>>>>> trigger their generation; an explicit dependency of config/tc-i386.o on
> >>>>>>> these headers needs adding here.
> >>>>>>
> >>>>>> Fixed.
> >>>>>>
> >>>>>>> Finally you're missing a dependency of the generated headers on
> >>>>>>> i386-gen.c.
> >>>>>>
> >>>>>> They have a dependency on i386-gen which depends on i386-gen.c.
> >>>>>
> >>>>> In opcodes/, yes, but talk was about the rule in gas/. Yet despite
> >>>>> your comment above I see that you've added the missing dependency.
> >>>>>
> >>>>>> Here is the v2 patch.
> >>>>>
> >>>>> As said in reply to v1 - my objection to this particular use of make
> >>>>> recursion remains.
> >>>>
> >>>> The gen-i386-tbl rule doesn't touch any files used by libopcodes.
> >>>
> >>> There are
> >>>
> >>> bfd/Makefile.in: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
> >>> $$local_target) \
> >>> binutils/Makefile.in: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
> >>> $$local_target) \
> >>> gas/Makefile.in: ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS)
> >>> $$local_target) \
> >>
> >> I'm glad you spotted this yourself - I was just about to point out
> >> that my concern isn't only a theoretical one, because of the
> >> generated makefiles we use. You don't draw any conclusion though:
> >> Are you willing to accept my approach, specifically reworked to
> >> account for an extra request of yours? Or are you meaning to make
> >> another attempt yourself, avoiding the undue make recursion?
> >>
> >
> > Calling $(MAKE) in Makefile is very normal in binutils-gdb.
>
> Any further examples where this isn't done strictly top-down, or in
> a properly controlled way within a single directory? I can indeed
> spot many instances of $(MAKE), but none matching the pattern you
> intend to introduce.
>
> > I don't see anything wrong with my approach. I prefer my
> > approach.
>
> I understand you prefer it, but given you've found what's wrong
> yourself, I'm puzzled by "I don't see anything wrong with my
> approach". Or wait - looks like I misread what you pointed out
> above: That looks to be something from the top level Makefile.
> Yet then again I can't spot any such in my build trees. Where is
> that excerpt from? (I can spot somewhat similar patterns, but
> they're used strictly to recurse _down_, just like looks to be
> the case with what you've quoted.)
>
> In any event, a practical manifestation of the issue I've said
> I'm concerned of is this: If a 2nd party anywhere in the tree did
> the same you do, and if the two $(MAKE) invocations then raced
> with one another, then it's plain undefined what would happen to
Fixed.
> the recursed-into Makefile when that needs re-generating for
> whatever reason. Hence $(MAKE) recursion should only occur
> strictly top-down, with (suitably controlled) recursion _within_
> a directory possibly being okay (would need proving for every
> individual instance).
>
> Jan
H.J.
---
As Jan Beulich <jbeulich@suse.com> noticed, since i386-init.h and
i386-tbl.h are only used by tc-i386.c, we can remove libopcodes
dependency by including opcodes/i386-tbl.h directly.
gas/
* Makefile.am ($(srcdir)/../opcodes/i386-init.h
$(srcdir)/../opcodes/i386-tbl.h): New rule.
* configure.ac (need_opcodes): Don't set for i386.
* config/tc-i386.c: Include "opcodes/i386-tbl.h".
* Makefile.in: Regenerated.
* configure: Likewise.
opcodes/
* Makefile.am (TARGET32_LIBOPCODES_CFILES): Remove i386-opc.c.
(i386-opc.lo): Removed.
($(srcdir)/i386-tbl.h): New rule.
($(srcdir)/i386-init.h): Likewise.
(gen-i386-tbl): Likewise.
* configure.ac: Remove i386-opc.lo.
* i386-opc.c: Removed.
* i386-opc.h (insn_template): Change name to const char *.
(i386_regtab): Removed.
(i386_regtab_size): Likewise.
* Makefile.in: Regenerated.
* configure: Likewise.
* po/POTFILES.in: Likewise.
---
gas/Makefile.am | 12 ++++++++++++
gas/Makefile.in | 12 ++++++++++++
gas/config/tc-i386.c | 1 +
gas/configure | 2 +-
gas/configure.ac | 2 +-
opcodes/Makefile.am | 6 +-----
opcodes/Makefile.in | 7 +------
opcodes/configure | 2 +-
opcodes/configure.ac | 2 +-
opcodes/i386-opc.c | 24 ------------------------
opcodes/i386-opc.h | 5 +----
opcodes/po/POTFILES.in | 1 -
12 files changed, 32 insertions(+), 44 deletions(-)
delete mode 100644 opcodes/i386-opc.c
diff --git a/gas/Makefile.am b/gas/Makefile.am
index dc5931252e4..bf9c7a4eb7e 100644
--- a/gas/Makefile.am
+++ b/gas/Makefile.am
@@ -448,6 +448,18 @@ development.exp: $(BFDDIR)/development.sh
$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
+config/tc-i386.@OBJEXT@: $(srcdir)/../opcodes/i386-init.h \
+ $(srcdir)/../opcodes/i386-tbl.h
+
+# i386-gen will generate both headers in one go. Use a pattern rule to
+# properly express this, with the inner dash ('-') arbitrarily chosen to
+# be the stem.
+$(srcdir)/../opcodes/i386%init.h $(srcdir)/../opcodes/i386%tbl.h: @MAINT@ $(srcdir)/../opcodes/i386-opc.tbl \
+ $(srcdir)/../opcodes/i386-reg.tbl \
+ $(srcdir)/../opcodes/i386-opc.h \
+ $(srcdir)/../opcodes/i386-gen.c
+ $(MAKE) -C ../opcodes gen-i386-tbl
+
EXTRA_as_new_SOURCES += config/m68k-parse.y
config/m68k-parse.c: $(srcdir)/config/m68k-parse.y
$(SHELL) $(YLWRAP) $(srcdir)/config/m68k-parse.y y.tab.c $@ -- $(YACCCOMPILE)
diff --git a/gas/Makefile.in b/gas/Makefile.in
index 8324cbe999d..349e7614039 100644
--- a/gas/Makefile.in
+++ b/gas/Makefile.in
@@ -2064,6 +2064,18 @@ check-DEJAGNU: site.exp
development.exp: $(BFDDIR)/development.sh
$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
+
+config/tc-i386.@OBJEXT@: $(srcdir)/../opcodes/i386-init.h \
+ $(srcdir)/../opcodes/i386-tbl.h
+
+# i386-gen will generate both headers in one go. Use a pattern rule to
+# properly express this, with the inner dash ('-') arbitrarily chosen to
+# be the stem.
+$(srcdir)/../opcodes/i386%init.h $(srcdir)/../opcodes/i386%tbl.h: @MAINT@ $(srcdir)/../opcodes/i386-opc.tbl \
+ $(srcdir)/../opcodes/i386-reg.tbl \
+ $(srcdir)/../opcodes/i386-opc.h \
+ $(srcdir)/../opcodes/i386-gen.c
+ $(MAKE) -C ../opcodes gen-i386-tbl
config/m68k-parse.c: $(srcdir)/config/m68k-parse.y
$(SHELL) $(YLWRAP) $(srcdir)/config/m68k-parse.y y.tab.c $@ -- $(YACCCOMPILE)
config/m68k-parse.h: config/m68k-parse.c
diff --git a/gas/config/tc-i386.c b/gas/config/tc-i386.c
index 55e2d85d04b..0211d8817fd 100644
--- a/gas/config/tc-i386.c
+++ b/gas/config/tc-i386.c
@@ -34,6 +34,7 @@
#include "sframe.h"
#include "elf/x86-64.h"
#include "opcodes/i386-init.h"
+#include "opcodes/i386-tbl.h"
#include <limits.h>
#ifndef INFER_ADDR_PREFIX
diff --git a/gas/configure b/gas/configure
index 57c1fa3557e..f329b905d37 100755
--- a/gas/configure
+++ b/gas/configure
@@ -12263,7 +12263,7 @@ _ACEOF
# Do we need the opcodes library?
case ${cpu_type} in
- vax | tic30)
+ i386 | vax | tic30)
;;
*)
diff --git a/gas/configure.ac b/gas/configure.ac
index feb43399ce8..7f165c9fe64 100644
--- a/gas/configure.ac
+++ b/gas/configure.ac
@@ -420,7 +420,7 @@ changequote([,])dnl
# Do we need the opcodes library?
case ${cpu_type} in
- vax | tic30)
+ i386 | vax | tic30)
;;
*)
diff --git a/opcodes/Makefile.am b/opcodes/Makefile.am
index cb6ff0ebc5e..517e0eb1cfd 100644
--- a/opcodes/Makefile.am
+++ b/opcodes/Makefile.am
@@ -160,7 +160,6 @@ TARGET32_LIBOPCODES_CFILES = \
h8300-dis.c \
hppa-dis.c \
i386-dis.c \
- i386-opc.c \
ip2k-asm.c \
ip2k-desc.c \
ip2k-dis.c \
@@ -560,10 +559,7 @@ $(srcdir)/i386%tbl.h $(srcdir)/i386%init.h: @MAINT@ i386-gen$(EXEEXT_FOR_BUILD)
< $(srcdir)/i386-opc.tbl \
| ./i386-gen$(EXEEXT_FOR_BUILD) --srcdir $(srcdir)
-i386-opc.lo: $(srcdir)/i386-tbl.h
-# While not really a dependency, specify i386-init.h here as well to make sure
-# it is generated even if i386-tbl.h is present and up-to-date.
-i386-opc.lo: $(srcdir)/i386-init.h
+gen-i386-tbl: $(srcdir)/i386-tbl.h $(srcdir)/i386-init.h
ia64-gen$(EXEEXT_FOR_BUILD): ia64-gen.o $(BUILD_LIB_DEPS)
$(AM_V_CCLD)$(LINK_FOR_BUILD) ia64-gen.o $(BUILD_LIBS)
diff --git a/opcodes/Makefile.in b/opcodes/Makefile.in
index 5524af5ccd2..9be2d279dfc 100644
--- a/opcodes/Makefile.in
+++ b/opcodes/Makefile.in
@@ -552,7 +552,6 @@ TARGET32_LIBOPCODES_CFILES = \
h8300-dis.c \
hppa-dis.c \
i386-dis.c \
- i386-opc.c \
ip2k-asm.c \
ip2k-desc.c \
ip2k-dis.c \
@@ -945,7 +944,6 @@ distclean-compile:
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h8300-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hppa-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386-dis.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386-opc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ia64-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ia64-opc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip2k-asm.Plo@am__quote@
@@ -1535,10 +1533,7 @@ $(srcdir)/i386%tbl.h $(srcdir)/i386%init.h: @MAINT@ i386-gen$(EXEEXT_FOR_BUILD)
< $(srcdir)/i386-opc.tbl \
| ./i386-gen$(EXEEXT_FOR_BUILD) --srcdir $(srcdir)
-i386-opc.lo: $(srcdir)/i386-tbl.h
-# While not really a dependency, specify i386-init.h here as well to make sure
-# it is generated even if i386-tbl.h is present and up-to-date.
-i386-opc.lo: $(srcdir)/i386-init.h
+gen-i386-tbl: $(srcdir)/i386-tbl.h $(srcdir)/i386-init.h
ia64-gen$(EXEEXT_FOR_BUILD): ia64-gen.o $(BUILD_LIB_DEPS)
$(AM_V_CCLD)$(LINK_FOR_BUILD) ia64-gen.o $(BUILD_LIBS)
diff --git a/opcodes/configure b/opcodes/configure
index 08c57a33855..9dc87d6c19c 100755
--- a/opcodes/configure
+++ b/opcodes/configure
@@ -12534,7 +12534,7 @@ if test x${all_targets} = xfalse ; then
bfd_h8300_arch) ta="$ta h8300-dis.lo" ;;
bfd_hppa_arch) ta="$ta hppa-dis.lo" ;;
bfd_i386_arch|bfd_iamcu_arch)
- ta="$ta i386-dis.lo i386-opc.lo" ;;
+ ta="$ta i386-dis.lo" ;;
bfd_ia64_arch) ta="$ta ia64-dis.lo ia64-opc.lo" ;;
bfd_ip2k_arch) ta="$ta ip2k-asm.lo ip2k-desc.lo ip2k-dis.lo ip2k-ibld.lo ip2k-opc.lo" using_cgen=yes ;;
bfd_epiphany_arch) ta="$ta epiphany-asm.lo epiphany-desc.lo epiphany-dis.lo epiphany-ibld.lo epiphany-opc.lo" using_cgen=yes ;;
diff --git a/opcodes/configure.ac b/opcodes/configure.ac
index e998d613436..8c79deb9ffc 100644
--- a/opcodes/configure.ac
+++ b/opcodes/configure.ac
@@ -282,7 +282,7 @@ if test x${all_targets} = xfalse ; then
bfd_h8300_arch) ta="$ta h8300-dis.lo" ;;
bfd_hppa_arch) ta="$ta hppa-dis.lo" ;;
bfd_i386_arch|bfd_iamcu_arch)
- ta="$ta i386-dis.lo i386-opc.lo" ;;
+ ta="$ta i386-dis.lo" ;;
bfd_ia64_arch) ta="$ta ia64-dis.lo ia64-opc.lo" ;;
bfd_ip2k_arch) ta="$ta ip2k-asm.lo ip2k-desc.lo ip2k-dis.lo ip2k-ibld.lo ip2k-opc.lo" using_cgen=yes ;;
bfd_epiphany_arch) ta="$ta epiphany-asm.lo epiphany-desc.lo epiphany-dis.lo epiphany-ibld.lo epiphany-opc.lo" using_cgen=yes ;;
diff --git a/opcodes/i386-opc.c b/opcodes/i386-opc.c
deleted file mode 100644
index 729c22932b1..00000000000
--- a/opcodes/i386-opc.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Intel 80386 opcode table
- Copyright (C) 2007-2022 Free Software Foundation, Inc.
-
- This file is part of the GNU opcodes library.
-
- This library is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- It is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
- License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
- MA 02110-1301, USA. */
-
-#include "sysdep.h"
-#include "libiberty.h"
-#include "i386-opc.h"
-#include "i386-tbl.h"
diff --git a/opcodes/i386-opc.h b/opcodes/i386-opc.h
index 215a72d18e1..8df7645d638 100644
--- a/opcodes/i386-opc.h
+++ b/opcodes/i386-opc.h
@@ -918,7 +918,7 @@ typedef union i386_operand_type
typedef struct insn_template
{
/* instruction name sans width suffix ("mov" for movl insns) */
- char *name;
+ const char *name;
/* Bitfield arrangement is such that individual fields can be easily
extracted (in native builds at least) - either by at most a masking
@@ -1005,6 +1005,3 @@ typedef struct
#define Dw2Inval (-1)
}
reg_entry;
-
-extern const reg_entry i386_regtab[];
-extern const unsigned int i386_regtab_size;
diff --git a/opcodes/po/POTFILES.in b/opcodes/po/POTFILES.in
index 9906bf14848..effd73f8f78 100644
--- a/opcodes/po/POTFILES.in
+++ b/opcodes/po/POTFILES.in
@@ -73,7 +73,6 @@ h8300-dis.c
hppa-dis.c
i386-dis.c
i386-gen.c
-i386-opc.c
i386-opc.h
ia64-asmtab.c
ia64-asmtab.h
--
2.38.1
next prev parent reply other threads:[~2022-12-01 18:26 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-22 18:19 [PATCH] " H.J. Lu
2022-11-23 8:36 ` Jan Beulich
2022-11-28 23:43 ` H.J. Lu
2022-11-29 9:12 ` Jan Beulich
2022-11-24 10:19 ` Jan Beulich
2022-11-28 23:49 ` [PATCH v2] " H.J. Lu
2022-11-29 9:22 ` Jan Beulich
2022-11-29 19:38 ` H.J. Lu
2022-11-30 0:06 ` H.J. Lu
2022-11-30 6:58 ` Jan Beulich
2022-11-30 22:22 ` H.J. Lu
2022-12-01 7:41 ` Jan Beulich
2022-12-01 18:26 ` H.J. Lu [this message]
2022-12-02 7:16 ` [PATCH v3] " Jan Beulich
2022-12-02 17:19 ` H.J. Lu
2022-12-05 11:25 ` Jan Beulich
2022-11-30 7:31 ` [PATCH v2] " Jan Beulich
2022-11-30 22:15 ` H.J. Lu
2022-12-01 7:21 ` Jan Beulich
2022-12-01 18:20 ` H.J. Lu
2022-12-02 7:10 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y4jx62oUPn2PB3tC@gmail.com \
--to=hjl.tools@gmail.com \
--cc=binutils@sourceware.org \
--cc=jbeulich@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).