* Problems with a mips cross compiler
@ 2012-01-06 13:36 Berto20
0 siblings, 0 replies; 2+ messages in thread
From: Berto20 @ 2012-01-06 13:36 UTC (permalink / raw)
To: crossgcc
[-- Attachment #1: Type: text/plain, Size: 4313 bytes --]
Hello everybody,
I´m doing my master thesis and I´m having problems configuring the cross compile
r. I´ve read lots of articles, faq, tutorial, etc.., but I still think I´m missi
ng something, maybe very stupid and basilar, but without that I can´t have a cle
ar vision of everything and I can´t make it all work…so please feel free to expl
ain me everything. Let´s go to the problem.
I´m using SoClib to design a NoC with many MIPS and many RAMs and I want to load
different applications in every RAM, to make every MIPS read from only one RAM.
I managed to do that using very simple applications (like hello word with inter
rupts…) so now I was trying to realize a JPEG decoder to use in a more intense w
ay the MIPS. The problem is that the cross compiler I´m using can´t find the bas
ic stdio functions and so cannot compile the application for the mips. So basica
lly I didn´t managed to install a working full cross compiler.
1) Let´s start with the cross compiler installed with SoClib:
Here there is the guide I´ve followed to install it: http://www.soclib.fr/trac/d
ev/wiki/CrossCompiler
Now from what I´ve read this is not a full cross compiler. I´ve only installed a
first stage gcc that can generate elf code for the mips but that can´t use any
C function. With that one, I should compile a C library to create a new cross co
mpiler. So it´s normal that it is not working, although that doesn´t answer to t
he question: why “Hello world” was working if it uses a printf and includes stdi
o.h? The answer should be that I´ve seen that SoClib has his header stdio.h with
very few function realized (printf is there) so I can´t use the standard C libr
ary with that compiler.
2) Because of that I´ve decided to install a full cross compiler and I´ve read s
o many guides that I will only post the two I´ve used in practice:
http://www.cse.iitb.ac.in/grc/gcc-workshop-11/downloads/slides/gccw11-config-bui
ld.pdf from page 108 (before explains the problems with cross compiling)
It uses EGLIBC. The only difference is that I´ve used as target “mipsel-elf”. If
I´ve understood correctly, this method requires a 3 stage cross compiler, becau
se eglibc can´t be fully compiled with the first stage cross compiler. Now the p
roblem is that I can´t succeed in installing eglibc with the first stage cross c
ompiler (it fails at page 122). I´have attached the log. I think problems starts
when it says: “mipsel-elf-gcc: error: unrecognized option ´-V´” and “mipsel-elf
-gcc: fatal error: no input files compilation terminated”. Seems that I´ve some
problem with the compiler and all finishes with an unsupported platform…but it s
hould work because I´ve copied the eglibc/ports directory like the guide says…
3) I´ve tried another guide that uses newlib instead of eglibc:
http://www.cygwin.com/ml/crossgcc/2005-08/msg00114/l-cross-ltr.pdf
This guide creates only a 2 stage cross compiler. I think it´s because newlib ca
n be fully compiled with the first stage compiler…am I right? Anyway I get the s
ame problem. I can´t compile newlib and I get similar errors (log attached).
So that´s my problem and here I put some doubt I´ve had trying to resolve it.
4) Can the problem be the target=mipsel-elf? I know from the gnu documentation t
hat the name to configure gnu should be: cpu-manufacturer-os (or cpu-manufacture
r-kernel-os) but I´ve read that mipsel-elf is accepted. The elf should be becaus
e I don´t want to load an OS on my NoC platform and here the second doubt…
5) Can the problem be the OS thing? The guides uses linux kernel headers…maybe w
ith a mipsel-elf target I shouldn´t configure binutils –with-sysroot? But sounds
me strange…what should change?
6) Yet another probably stupid question. The stdio and generally C functions, do
esn´t need an OS right? Because all these problems are making me doubt on the ba
sics…so I should be able to run a JPEG decoding C application with a mipsel-elf
cross compiler right?
Every consideration, advice and help will be appreciated. If you have some docum
ents about these arguments please let me know, I would like to learn and become
more confident in this field.
Thanks
Alberto
[-- Attachment #2: config_newlib.log --]
[-- Type: application/octet-stream, Size: 13049 bytes --]
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.64. Invocation command line was
$ /home/bertone/Scaricati/src/newlib-1.20.0/configure --host=mipsel-elf --prefix=/home/bertone/programmazione/crosscompiler/mips/install
## --------- ##
## Platform. ##
## --------- ##
hostname = KennyNotebook
uname -m = x86_64
uname -r = 2.6.35-31-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Mon Nov 28 19:29:10 UTC 2011
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/soclib/utils/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/binutils/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2237: checking build system type
configure:2251: result: x86_64-unknown-linux-gnu
configure:2298: checking host system type
configure:2311: result: mipsel-unknown-elf
configure:2331: checking target system type
configure:2344: result: mipsel-unknown-elf
configure:2398: checking for a BSD-compatible install
configure:2466: result: /usr/bin/install -c
configure:2477: checking whether ln works
configure:2499: result: yes
configure:2503: checking whether ln -s works
configure:2507: result: yes
configure:2514: checking for a sed that does not truncate output
configure:2578: result: /bin/sed
configure:2587: checking for gawk
configure:2603: found /usr/bin/gawk
configure:2614: result: gawk
configure:3733: checking for mipsel-elf-gcc
configure:3760: result: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
configure:4029: checking for C compiler version
configure:4038: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc --version >&5
mipsel-elf-gcc (GCC) 4.6.2
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4049: $? = 0
configure:4038: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -v >&5
Using built-in specs.
COLLECT_GCC=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
COLLECT_LTO_WRAPPER=/home/bertone/programmazione/crosscompiler/mips/install/libexec/gcc/mipsel-elf/4.6.2/lto-wrapper
Target: mipsel-elf
Configured with: ../../../../../Scaricati/src/gcc-4.6.2/configure --target=mipsel-elf --prefix=/home/bertone/programmazione/crosscompiler/mips/install --without-headers --with-newlib --disable-shared --disable-threads --disable-libssp --disable-libgomp --disable-libmudflap --enable-languages=c --disable-werror
Thread model: single
gcc version 4.6.2 (GCC)
configure:4049: $? = 0
configure:4038: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -V >&5
mipsel-elf-gcc: error: unrecognized option '-V'
mipsel-elf-gcc: fatal error: no input files
compilation terminated.
configure:4049: $? = 1
configure:4038: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -qversion >&5
mipsel-elf-gcc: error: unrecognized option '-qversion'
mipsel-elf-gcc: fatal error: no input files
compilation terminated.
configure:4049: $? = 1
configure:4069: checking for C compiler default output file name
configure:4091: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc conftest.c >&5
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find crti.o: No such file or directory
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find crtbegin.o: No such file or directory
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find -lgcc
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find -lgcc
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find crtend.o: No such file or directory
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find crtn.o: No such file or directory
collect2: ld returned 1 exit status
configure:4095: $? = 1
configure:4132: result:
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:4138: error: in `/home/bertone/programmazione/crosscompiler/mips/build/newlib':
configure:4142: error: C compiler cannot create executables
See `config.log' for more details.
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_AR_FOR_TARGET_set=
ac_cv_env_AR_FOR_TARGET_value=
ac_cv_env_AR_set=
ac_cv_env_AR_value=
ac_cv_env_AS_FOR_TARGET_set=
ac_cv_env_AS_FOR_TARGET_value=
ac_cv_env_AS_set=
ac_cv_env_AS_value=
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_FOR_TARGET_set=
ac_cv_env_CC_FOR_TARGET_value=
ac_cv_env_CC_set=set
ac_cv_env_CC_value=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_FOR_TARGET_set=
ac_cv_env_CXX_FOR_TARGET_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_DLLTOOL_FOR_TARGET_set=
ac_cv_env_DLLTOOL_FOR_TARGET_value=
ac_cv_env_DLLTOOL_set=
ac_cv_env_DLLTOOL_value=
ac_cv_env_GCC_FOR_TARGET_set=
ac_cv_env_GCC_FOR_TARGET_value=
ac_cv_env_GCJ_FOR_TARGET_set=
ac_cv_env_GCJ_FOR_TARGET_value=
ac_cv_env_GFORTRAN_FOR_TARGET_set=
ac_cv_env_GFORTRAN_FOR_TARGET_value=
ac_cv_env_GOC_FOR_TARGET_set=
ac_cv_env_GOC_FOR_TARGET_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LD_FOR_TARGET_set=
ac_cv_env_LD_FOR_TARGET_value=
ac_cv_env_LD_set=
ac_cv_env_LD_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LIPO_FOR_TARGET_set=
ac_cv_env_LIPO_FOR_TARGET_value=
ac_cv_env_LIPO_set=
ac_cv_env_LIPO_value=
ac_cv_env_NM_FOR_TARGET_set=
ac_cv_env_NM_FOR_TARGET_value=
ac_cv_env_NM_set=
ac_cv_env_NM_value=
ac_cv_env_OBJCOPY_set=
ac_cv_env_OBJCOPY_value=
ac_cv_env_OBJDUMP_FOR_TARGET_set=
ac_cv_env_OBJDUMP_FOR_TARGET_value=
ac_cv_env_OBJDUMP_set=
ac_cv_env_OBJDUMP_value=
ac_cv_env_RANLIB_FOR_TARGET_set=
ac_cv_env_RANLIB_FOR_TARGET_value=
ac_cv_env_RANLIB_set=
ac_cv_env_RANLIB_value=
ac_cv_env_READELF_FOR_TARGET_set=
ac_cv_env_READELF_FOR_TARGET_value=
ac_cv_env_READELF_set=
ac_cv_env_READELF_value=
ac_cv_env_STRIP_FOR_TARGET_set=
ac_cv_env_STRIP_FOR_TARGET_value=
ac_cv_env_STRIP_set=
ac_cv_env_STRIP_value=
ac_cv_env_WINDMC_FOR_TARGET_set=
ac_cv_env_WINDMC_FOR_TARGET_value=
ac_cv_env_WINDMC_set=
ac_cv_env_WINDMC_value=
ac_cv_env_WINDRES_FOR_TARGET_set=
ac_cv_env_WINDRES_FOR_TARGET_value=
ac_cv_env_WINDRES_set=
ac_cv_env_WINDRES_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_build_configargs_set=
ac_cv_env_build_configargs_value=
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=mipsel-elf
ac_cv_env_host_configargs_set=
ac_cv_env_host_configargs_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_env_target_configargs_set=
ac_cv_env_target_configargs_value=
ac_cv_host=mipsel-unknown-elf
ac_cv_path_SED=/bin/sed
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=gawk
ac_cv_prog_CC=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
ac_cv_target=mipsel-unknown-elf
acx_cv_prog_LN=ln
## ----------------- ##
## Output variables. ##
## ----------------- ##
AR=''
AR_FOR_BUILD='ar'
AR_FOR_TARGET=''
AS=''
AS_FOR_BUILD='as'
AS_FOR_TARGET=''
AWK='gawk'
BISON=''
BUILD_CONFIG=''
CC='/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc'
CC_FOR_BUILD='gcc'
CC_FOR_TARGET=''
CFLAGS=''
CFLAGS_FOR_BUILD=''
CFLAGS_FOR_TARGET=''
COMPILER_AS_FOR_TARGET=''
COMPILER_LD_FOR_TARGET=''
COMPILER_NM_FOR_TARGET=''
CONFIGURE_GDB_TK=''
CPPFLAGS=''
CXX=''
CXXFLAGS=''
CXXFLAGS_FOR_BUILD=''
CXXFLAGS_FOR_TARGET=''
CXX_FOR_BUILD='g++'
CXX_FOR_TARGET=''
DEBUG_PREFIX_CFLAGS_FOR_TARGET=''
DEFS=''
DLLTOOL=''
DLLTOOL_FOR_BUILD='dlltool'
DLLTOOL_FOR_TARGET=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EXEEXT=''
EXPECT=''
EXTRA_CONFIGARGS_LIBJAVA='--disable-static'
FLAGS_FOR_TARGET=''
FLEX=''
GCC_FOR_TARGET=''
GCC_SHLIB_SUBDIR=''
GCJ_FOR_BUILD='gcj'
GCJ_FOR_TARGET=''
GDB_TK=''
GFORTRAN_FOR_BUILD='gfortran'
GFORTRAN_FOR_TARGET=''
GNATBIND=''
GNATMAKE=''
GOC_FOR_BUILD='gccgo'
GOC_FOR_TARGET=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_GDB_TK=''
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
LD=''
LDFLAGS=''
LDFLAGS_FOR_BUILD=''
LDFLAGS_FOR_TARGET=''
LD_FOR_BUILD='ld'
LD_FOR_TARGET=''
LEX=''
LIBOBJS=''
LIBS=''
LIPO=''
LIPO_FOR_TARGET=''
LN='ln'
LN_S='ln -s'
LTLIBOBJS=''
M4=''
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO=''
NM=''
NM_FOR_BUILD='nm'
NM_FOR_TARGET=''
OBJCOPY=''
OBJDUMP=''
OBJDUMP_FOR_TARGET=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_URL=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
POSTSTAGE1_CONFIGURE_FLAGS=''
RANLIB=''
RANLIB_FOR_BUILD='ranlib'
RANLIB_FOR_TARGET=''
RAW_CXX_FOR_TARGET=''
READELF=''
READELF_FOR_TARGET=''
RPATH_ENVVAR=''
RUNTEST=''
SED='/bin/sed'
SHELL='/bin/bash'
STRIP=''
STRIP_FOR_TARGET=''
SYSROOT_CFLAGS_FOR_TARGET=''
TOPLEVEL_CONFIGURE_ARGUMENTS='/home/bertone/Scaricati/src/newlib-1.20.0/configure --host=mipsel-elf --prefix=/home/bertone/programmazione/crosscompiler/mips/install'
WINDMC=''
WINDMC_FOR_BUILD='windmc'
WINDMC_FOR_TARGET=''
WINDRES=''
WINDRES_FOR_BUILD='windres'
WINDRES_FOR_TARGET=''
YACC=''
ac_ct_CC=''
ac_ct_CXX=''
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_configargs=''
build_configdirs='build-libiberty build-texinfo build-flex build-bison build-m4 build-fixincludes'
build_cpu='x86_64'
build_libsubdir='build-x86_64-unknown-linux-gnu'
build_noncanonical='x86_64-unknown-linux-gnu'
build_os='linux-gnu'
build_subdir='build-x86_64-unknown-linux-gnu'
build_tooldir=''
build_vendor='unknown'
clooginc=''
clooglibs=''
compare_exclusions=''
configdirs='intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
do_compare=''
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
extra_host_libiberty_configure_flags=''
extra_mpc_gmp_configure_flags=''
extra_mpc_mpfr_configure_flags=''
extra_mpfr_configure_flags=''
gmpinc=''
gmplibs=''
host='mipsel-unknown-elf'
host_alias='mipsel-elf'
host_configargs=''
host_cpu='mipsel'
host_noncanonical='mipsel-elf'
host_os='elf'
host_subdir='.'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
poststage1_ldflags=''
poststage1_libs=''
pplinc=''
ppllibs=''
prefix='/home/bertone/programmazione/crosscompiler/mips/install'
program_transform_name='s,y,y,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
stage1_cflags=''
stage1_checking=''
stage1_languages=''
stage1_ldflags=''
stage1_libs=''
stage2_werror_flag=''
sysconfdir='${prefix}/etc'
target='mipsel-unknown-elf'
target_alias=''
target_configargs=''
target_configdirs='target-libgcc target-libgloss target-newlib target-libgomp target-libitm target-libstdc++-v3 target-libmudflap target-libssp target-libquadmath target-libgfortran target-boehm-gc target-libffi target-zlib target-libjava target-libobjc target-libada target-libgo target-rda'
target_cpu='mipsel'
target_noncanonical='mipsel-elf'
target_os='elf'
target_subdir='mipsel-elf'
target_vendor='unknown'
tooldir=''
## ------------------- ##
## File substitutions. ##
## ------------------- ##
alphaieee_frag=''
host_makefile_frag='/dev/null'
ospace_frag=''
serialization_dependencies=''
target_makefile_frag=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
configure: exit 77
[-- Attachment #3: config_eglibc.log --]
[-- Type: application/octet-stream, Size: 28078 bytes --]
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by GNU C Library configure (see version.h), which was
generated by GNU Autoconf 2.63. Invocation command line was
$ /home/bertone/Scaricati/src/eglibc/eglibc/libc/configure --prefix=/usr --with-headers=/home/bertone/programmazione/crosscompiler/mips/sysroot/usr/include --build=i686-pc-linux-gnu --host=mipsel-elf --disable-profile --without-gd --without-cvs --enable-add-ons
## --------- ##
## Platform. ##
## --------- ##
hostname = KennyNotebook
uname -m = x86_64
uname -r = 2.6.35-31-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Mon Nov 28 19:29:10 UTC 2011
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/soclib/utils/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/binutils/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2029: checking build system type
configure:2047: result: i686-pc-linux-gnu
configure:2069: checking host system type
configure:2084: result: mipsel-unknown-elf
configure:2115: checking for mipsel-elf-gcc
configure:2142: result: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
configure:2414: checking for C compiler version
configure:2422: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc --version >&5
mipsel-elf-gcc (GCC) 4.6.2
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2426: $? = 0
configure:2433: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -v >&5
Using built-in specs.
COLLECT_GCC=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
COLLECT_LTO_WRAPPER=/home/bertone/programmazione/crosscompiler/mips/install/libexec/gcc/mipsel-elf/4.6.2/lto-wrapper
Target: mipsel-elf
Configured with: ../../../../../Scaricati/src/gcc-4.6.2/configure --target=mipsel-elf --prefix=/home/bertone/programmazione/crosscompiler/mips/install --without-headers --with-newlib --disable-shared --disable-threads --disable-libssp --disable-libgomp --disable-libmudflap --enable-languages=c --disable-werror
Thread model: single
gcc version 4.6.2 (GCC)
configure:2437: $? = 0
configure:2444: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -V >&5
mipsel-elf-gcc: error: unrecognized option '-V'
mipsel-elf-gcc: fatal error: no input files
compilation terminated.
configure:2448: $? = 1
configure:2452: checking for suffix of object files
configure:2478: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -c conftest.c >&5
configure:2482: $? = 0
configure:2507: result: o
configure:2511: checking whether we are using the GNU C compiler
configure:2540: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -c conftest.c >&5
configure:2547: $? = 0
configure:2564: result: yes
configure:2573: checking whether /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc accepts -g
configure:2603: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -c -g conftest.c >&5
configure:2610: $? = 0
configure:2711: result: yes
configure:2728: checking for /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc option to accept ISO C89
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -c -g -O2 conftest.c >&5
conftest.c:9:19: fatal error: stdio.h: No such file or directory
compilation terminated.
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -qlanglvl=extc89 -c -g -O2 conftest.c >&5
mipsel-elf-gcc: error: unrecognized option '-qlanglvl=extc89'
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -qlanglvl=ansi -c -g -O2 conftest.c >&5
mipsel-elf-gcc: error: unrecognized option '-qlanglvl=ansi'
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -std -c -g -O2 conftest.c >&5
cc1: error: unrecognized command line option '-std'
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -Ae -c -g -O2 conftest.c >&5
<command-line>:0:1: error: missing '(' after predicate
conftest.c:9:19: fatal error: stdio.h: No such file or directory
compilation terminated.
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -Aa -D_HPUX_SOURCE -c -g -O2 conftest.c >&5
<command-line>:0:1: error: missing '(' after predicate
conftest.c:9:19: fatal error: stdio.h: No such file or directory
compilation terminated.
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -Xc -D__EXTENSIONS__ -c -g -O2 conftest.c >&5
mipsel-elf-gcc: error: unrecognized option '-Xc'
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2835: result: unsupported
configure:2855: checking for gcc
configure:2882: result: gcc
configure:2900: checking how to run the C preprocessor
configure:2940: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E conftest.c
configure:2947: $? = 0
configure:2978: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E conftest.c
conftest.c:8:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:2985: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3018: result: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E
configure:3047: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E conftest.c
configure:3054: $? = 0
configure:3085: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E conftest.c
conftest.c:8:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:3092: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3146: checking for mipsel-elf-g++
configure:3176: result: no
configure:3146: checking for mipsel-elf-c++
configure:3176: result: no
configure:3146: checking for mipsel-elf-gpp
configure:3176: result: no
configure:3146: checking for mipsel-elf-aCC
configure:3176: result: no
configure:3146: checking for mipsel-elf-CC
configure:3176: result: no
configure:3146: checking for mipsel-elf-cxx
configure:3176: result: no
configure:3146: checking for mipsel-elf-cc++
configure:3176: result: no
configure:3146: checking for mipsel-elf-cl.exe
configure:3176: result: no
configure:3146: checking for mipsel-elf-FCC
configure:3176: result: no
configure:3146: checking for mipsel-elf-KCC
configure:3176: result: no
configure:3146: checking for mipsel-elf-RCC
configure:3176: result: no
configure:3146: checking for mipsel-elf-xlC_r
configure:3176: result: no
configure:3146: checking for mipsel-elf-xlC
configure:3176: result: no
configure:3190: checking for g++
configure:3206: found /usr/bin/g++
configure:3217: result: g++
configure:3233: WARNING: using cross tools not prefixed with host triplet
configure:3244: checking for C++ compiler version
configure:3252: g++ --version >&5
g++ (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3256: $? = 0
configure:3263: g++ -v >&5
Using built-in specs.
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.4.4-14ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.4 --enable-shared --enable-multiarch --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.4 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5)
configure:3267: $? = 0
configure:3274: g++ -V >&5
g++: '-V' option must have argument
configure:3278: $? = 1
configure:3281: checking whether we are using the GNU C++ compiler
configure:3310: g++ -c conftest.cpp >&5
configure:3317: $? = 0
configure:3334: result: yes
configure:3343: checking whether g++ accepts -g
configure:3373: g++ -c -g conftest.cpp >&5
configure:3380: $? = 0
configure:3481: result: yes
configure:4134: running configure fragment for add-on libidn
configure:4134: running configure fragment for add-on nptl
configure:4190: checking add-on ports for preconfigure fragments
configure:4197: result:
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=set
ac_cv_env_CC_value=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=i686-pc-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=mipsel-elf
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=mipsel-unknown-elf
ac_cv_objext=o
ac_cv_prog_BUILD_CC=gcc
ac_cv_prog_CC=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
ac_cv_prog_CPP='/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E'
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_cc_c89=no
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
libc_cv_nss_crypt=no
## ----------------- ##
## Output variables. ##
## ----------------- ##
AR='mipsel-elf-ar'
AS=''
ASFLAGS_config=''
AUTOCONF=''
AWK=''
BASH_SHELL=''
BISON=''
BUILD_CC='gcc'
CC='/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc'
CFLAGS='-g -O2'
CPP='/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E'
CPPFLAGS=''
CXX='g++'
CXXFLAGS='-g -O2'
CXX_SYSINCLUDES=''
DEFINES=''
DEFS=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
GREP=''
INSTALL_DATA=''
INSTALL_INFO=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
KSH=''
LD=''
LDFLAGS=''
LIBGD=''
LIBOBJS=''
LIBS=''
LN_S=''
LTLIBOBJS=''
MAKE=''
MAKEINFO=''
MIG=''
MSGFMT=''
NM=''
OBJCOPY=''
OBJDUMP=''
OBJEXT='o'
PACKAGE_BUGREPORT='http://sourceware.org/bugzilla/'
PACKAGE_NAME='GNU C Library'
PACKAGE_STRING='GNU C Library (see version.h)'
PACKAGE_TARNAME='glibc'
PACKAGE_VERSION='(see version.h)'
PATH_SEPARATOR=':'
PERL=''
PKGVERSION='(EGLIBC) '
PKGVERSION_TEXI='(EGLIBC) '
PWD_P=''
READELF=''
RELEASE=''
REPORT_BUGS_TEXI='@uref{http://www.eglibc.org/issues/}'
REPORT_BUGS_TO='<http://www.eglibc.org/issues/>'
SED=''
SHELL='/bin/bash'
SYSINCLUDES=''
VERSION=''
VERSIONING=''
ac_ct_CC=''
ac_ct_CXX='g++'
add_on_subdirs=' libidn'
add_ons='libidn ports'
all_warnings=''
base_machine='mips'
bindir='${exec_prefix}/bin'
bindnow='no'
bounded='no'
build='i686-pc-linux-gnu'
build_alias='i686-pc-linux-gnu'
build_cpu='i686'
build_os='linux-gnu'
build_vendor='pc'
cross_compiling='yes'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
elf='no'
enable_check_abi='no'
exceptions=''
exec_prefix='NONE'
fno_unit_at_a_time=''
force_install='yes'
gnu89_inline=''
have_libaudit=''
have_libcap=''
have_selinux=''
host='mipsel-unknown-elf'
host_alias='mipsel-elf'
host_cpu='mipsel'
host_os='elf'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
ldd_rewrite_script=''
libc_cv_Bgroup=''
libc_cv_as_i686=''
libc_cv_as_needed=''
libc_cv_cc_avx=''
libc_cv_cc_fma4=''
libc_cv_cc_novzeroupper=''
libc_cv_cc_sse4=''
libc_cv_cc_submachine=''
libc_cv_cc_with_libunwind=''
libc_cv_cpp_asm_debuginfo=''
libc_cv_forced_unwind=''
libc_cv_fpie=''
libc_cv_gcc_static_libgcc=''
libc_cv_gcc_unwind_find_fde=''
libc_cv_hashstyle=''
libc_cv_have_bash2=''
libc_cv_have_initfini=''
libc_cv_have_ksh=''
libc_cv_libgcc_s_suffix=''
libc_cv_localedir=''
libc_cv_nss_crypt='no'
libc_cv_output_format=''
libc_cv_pic_default=''
libc_cv_rootsbindir=''
libc_cv_slibdir=''
libc_cv_ssp=''
libc_cv_sysconfdir=''
libc_cv_z_combreloc=''
libc_cv_z_execstack=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mach_interface_list=''
mandir='${datarootdir}/man'
multi_arch='default'
nopic_initfini=''
old_glibc_headers=''
oldest_abi='default'
oldincludedir='/usr/include'
omitfp='no'
pdfdir='${docdir}'
prefix='/usr'
profile='no'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
shared='default'
sharedstatedir='${prefix}/com'
sizeof_long_double=''
static='yes'
static_nss='no'
subdirs=' '
submachine=''
sysconfdir='${prefix}/etc'
sysdeps_add_ons=''
sysnames=''
target_alias=''
use_default_link='default'
use_ldconfig=''
with_fp='yes'
xcoff='no'
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "GNU C Library"
#define PACKAGE_TARNAME "glibc"
#define PACKAGE_VERSION "(see version.h)"
#define PACKAGE_STRING "GNU C Library (see version.h)"
#define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
#define PKGVERSION "(EGLIBC) "
#define REPORT_BUGS_TO "<http://www.eglibc.org/issues/>"
#define HAVE_LIBIDN 1
configure: exit 1
[-- Attachment #4: Type: text/plain, Size: 71 bytes --]
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 2+ messages in thread
* Problems with a mips cross compiler
@ 2012-01-06 13:40 Berto20
0 siblings, 0 replies; 2+ messages in thread
From: Berto20 @ 2012-01-06 13:40 UTC (permalink / raw)
To: crossgcc
[-- Attachment #1: Type: text/plain, Size: 4313 bytes --]
Hello everybody,
I´m doing my master thesis and I´m having problems configuring the cross compile
r. I´ve read lots of articles, faq, tutorial, etc.., but I still think I´m missi
ng something, maybe very stupid and basilar, but without that I can´t have a cle
ar vision of everything and I can´t make it all work…so please feel free to expl
ain me everything. Let´s go to the problem.
I´m using SoClib to design a NoC with many MIPS and many RAMs and I want to load
different applications in every RAM, to make every MIPS read from only one RAM.
I managed to do that using very simple applications (like hello word with inter
rupts…) so now I was trying to realize a JPEG decoder to use in a more intense w
ay the MIPS. The problem is that the cross compiler I´m using can´t find the bas
ic stdio functions and so cannot compile the application for the mips. So basica
lly I didn´t managed to install a working full cross compiler.
1) Let´s start with the cross compiler installed with SoClib:
Here there is the guide I´ve followed to install it: http://www.soclib.fr/trac/d
ev/wiki/CrossCompiler
Now from what I´ve read this is not a full cross compiler. I´ve only installed a
first stage gcc that can generate elf code for the mips but that can´t use any
C function. With that one, I should compile a C library to create a new cross co
mpiler. So it´s normal that it is not working, although that doesn´t answer to t
he question: why “Hello world” was working if it uses a printf and includes stdi
o.h? The answer should be that I´ve seen that SoClib has his header stdio.h with
very few function realized (printf is there) so I can´t use the standard C libr
ary with that compiler.
2) Because of that I´ve decided to install a full cross compiler and I´ve read s
o many guides that I will only post the two I´ve used in practice:
http://www.cse.iitb.ac.in/grc/gcc-workshop-11/downloads/slides/gccw11-config-bui
ld.pdf from page 108 (before explains the problems with cross compiling)
It uses EGLIBC. The only difference is that I´ve used as target “mipsel-elf”. If
I´ve understood correctly, this method requires a 3 stage cross compiler, becau
se eglibc can´t be fully compiled with the first stage cross compiler. Now the p
roblem is that I can´t succeed in installing eglibc with the first stage cross c
ompiler (it fails at page 122). I´have attached the log. I think problems starts
when it says: “mipsel-elf-gcc: error: unrecognized option ´-V´” and “mipsel-elf
-gcc: fatal error: no input files compilation terminated”. Seems that I´ve some
problem with the compiler and all finishes with an unsupported platform…but it s
hould work because I´ve copied the eglibc/ports directory like the guide says…
3) I´ve tried another guide that uses newlib instead of eglibc:
http://www.cygwin.com/ml/crossgcc/2005-08/msg00114/l-cross-ltr.pdf
This guide creates only a 2 stage cross compiler. I think it´s because newlib ca
n be fully compiled with the first stage compiler…am I right? Anyway I get the s
ame problem. I can´t compile newlib and I get similar errors (log attached).
So that´s my problem and here I put some doubt I´ve had trying to resolve it.
4) Can the problem be the target=mipsel-elf? I know from the gnu documentation t
hat the name to configure gnu should be: cpu-manufacturer-os (or cpu-manufacture
r-kernel-os) but I´ve read that mipsel-elf is accepted. The elf should be becaus
e I don´t want to load an OS on my NoC platform and here the second doubt…
5) Can the problem be the OS thing? The guides uses linux kernel headers…maybe w
ith a mipsel-elf target I shouldn´t configure binutils –with-sysroot? But sounds
me strange…what should change?
6) Yet another probably stupid question. The stdio and generally C functions, do
esn´t need an OS right? Because all these problems are making me doubt on the ba
sics…so I should be able to run a JPEG decoding C application with a mipsel-elf
cross compiler right?
Every consideration, advice and help will be appreciated. If you have some docum
ents about these arguments please let me know, I would like to learn and become
more confident in this field.
Thanks
Alberto
[-- Attachment #2: config_newlib.log --]
[-- Type: application/octet-stream, Size: 13049 bytes --]
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.64. Invocation command line was
$ /home/bertone/Scaricati/src/newlib-1.20.0/configure --host=mipsel-elf --prefix=/home/bertone/programmazione/crosscompiler/mips/install
## --------- ##
## Platform. ##
## --------- ##
hostname = KennyNotebook
uname -m = x86_64
uname -r = 2.6.35-31-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Mon Nov 28 19:29:10 UTC 2011
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/soclib/utils/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/binutils/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2237: checking build system type
configure:2251: result: x86_64-unknown-linux-gnu
configure:2298: checking host system type
configure:2311: result: mipsel-unknown-elf
configure:2331: checking target system type
configure:2344: result: mipsel-unknown-elf
configure:2398: checking for a BSD-compatible install
configure:2466: result: /usr/bin/install -c
configure:2477: checking whether ln works
configure:2499: result: yes
configure:2503: checking whether ln -s works
configure:2507: result: yes
configure:2514: checking for a sed that does not truncate output
configure:2578: result: /bin/sed
configure:2587: checking for gawk
configure:2603: found /usr/bin/gawk
configure:2614: result: gawk
configure:3733: checking for mipsel-elf-gcc
configure:3760: result: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
configure:4029: checking for C compiler version
configure:4038: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc --version >&5
mipsel-elf-gcc (GCC) 4.6.2
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4049: $? = 0
configure:4038: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -v >&5
Using built-in specs.
COLLECT_GCC=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
COLLECT_LTO_WRAPPER=/home/bertone/programmazione/crosscompiler/mips/install/libexec/gcc/mipsel-elf/4.6.2/lto-wrapper
Target: mipsel-elf
Configured with: ../../../../../Scaricati/src/gcc-4.6.2/configure --target=mipsel-elf --prefix=/home/bertone/programmazione/crosscompiler/mips/install --without-headers --with-newlib --disable-shared --disable-threads --disable-libssp --disable-libgomp --disable-libmudflap --enable-languages=c --disable-werror
Thread model: single
gcc version 4.6.2 (GCC)
configure:4049: $? = 0
configure:4038: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -V >&5
mipsel-elf-gcc: error: unrecognized option '-V'
mipsel-elf-gcc: fatal error: no input files
compilation terminated.
configure:4049: $? = 1
configure:4038: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -qversion >&5
mipsel-elf-gcc: error: unrecognized option '-qversion'
mipsel-elf-gcc: fatal error: no input files
compilation terminated.
configure:4049: $? = 1
configure:4069: checking for C compiler default output file name
configure:4091: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc conftest.c >&5
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find crti.o: No such file or directory
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find crtbegin.o: No such file or directory
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find -lgcc
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find -lgcc
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find crtend.o: No such file or directory
/home/bertone/programmazione/crosscompiler/mips/install/lib/gcc/mipsel-elf/4.6.2/../../../../mipsel-elf/bin/ld: cannot find crtn.o: No such file or directory
collect2: ld returned 1 exit status
configure:4095: $? = 1
configure:4132: result:
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:4138: error: in `/home/bertone/programmazione/crosscompiler/mips/build/newlib':
configure:4142: error: C compiler cannot create executables
See `config.log' for more details.
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_AR_FOR_TARGET_set=
ac_cv_env_AR_FOR_TARGET_value=
ac_cv_env_AR_set=
ac_cv_env_AR_value=
ac_cv_env_AS_FOR_TARGET_set=
ac_cv_env_AS_FOR_TARGET_value=
ac_cv_env_AS_set=
ac_cv_env_AS_value=
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_FOR_TARGET_set=
ac_cv_env_CC_FOR_TARGET_value=
ac_cv_env_CC_set=set
ac_cv_env_CC_value=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_FOR_TARGET_set=
ac_cv_env_CXX_FOR_TARGET_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_DLLTOOL_FOR_TARGET_set=
ac_cv_env_DLLTOOL_FOR_TARGET_value=
ac_cv_env_DLLTOOL_set=
ac_cv_env_DLLTOOL_value=
ac_cv_env_GCC_FOR_TARGET_set=
ac_cv_env_GCC_FOR_TARGET_value=
ac_cv_env_GCJ_FOR_TARGET_set=
ac_cv_env_GCJ_FOR_TARGET_value=
ac_cv_env_GFORTRAN_FOR_TARGET_set=
ac_cv_env_GFORTRAN_FOR_TARGET_value=
ac_cv_env_GOC_FOR_TARGET_set=
ac_cv_env_GOC_FOR_TARGET_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LD_FOR_TARGET_set=
ac_cv_env_LD_FOR_TARGET_value=
ac_cv_env_LD_set=
ac_cv_env_LD_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LIPO_FOR_TARGET_set=
ac_cv_env_LIPO_FOR_TARGET_value=
ac_cv_env_LIPO_set=
ac_cv_env_LIPO_value=
ac_cv_env_NM_FOR_TARGET_set=
ac_cv_env_NM_FOR_TARGET_value=
ac_cv_env_NM_set=
ac_cv_env_NM_value=
ac_cv_env_OBJCOPY_set=
ac_cv_env_OBJCOPY_value=
ac_cv_env_OBJDUMP_FOR_TARGET_set=
ac_cv_env_OBJDUMP_FOR_TARGET_value=
ac_cv_env_OBJDUMP_set=
ac_cv_env_OBJDUMP_value=
ac_cv_env_RANLIB_FOR_TARGET_set=
ac_cv_env_RANLIB_FOR_TARGET_value=
ac_cv_env_RANLIB_set=
ac_cv_env_RANLIB_value=
ac_cv_env_READELF_FOR_TARGET_set=
ac_cv_env_READELF_FOR_TARGET_value=
ac_cv_env_READELF_set=
ac_cv_env_READELF_value=
ac_cv_env_STRIP_FOR_TARGET_set=
ac_cv_env_STRIP_FOR_TARGET_value=
ac_cv_env_STRIP_set=
ac_cv_env_STRIP_value=
ac_cv_env_WINDMC_FOR_TARGET_set=
ac_cv_env_WINDMC_FOR_TARGET_value=
ac_cv_env_WINDMC_set=
ac_cv_env_WINDMC_value=
ac_cv_env_WINDRES_FOR_TARGET_set=
ac_cv_env_WINDRES_FOR_TARGET_value=
ac_cv_env_WINDRES_set=
ac_cv_env_WINDRES_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_build_configargs_set=
ac_cv_env_build_configargs_value=
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=mipsel-elf
ac_cv_env_host_configargs_set=
ac_cv_env_host_configargs_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_env_target_configargs_set=
ac_cv_env_target_configargs_value=
ac_cv_host=mipsel-unknown-elf
ac_cv_path_SED=/bin/sed
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=gawk
ac_cv_prog_CC=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
ac_cv_target=mipsel-unknown-elf
acx_cv_prog_LN=ln
## ----------------- ##
## Output variables. ##
## ----------------- ##
AR=''
AR_FOR_BUILD='ar'
AR_FOR_TARGET=''
AS=''
AS_FOR_BUILD='as'
AS_FOR_TARGET=''
AWK='gawk'
BISON=''
BUILD_CONFIG=''
CC='/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc'
CC_FOR_BUILD='gcc'
CC_FOR_TARGET=''
CFLAGS=''
CFLAGS_FOR_BUILD=''
CFLAGS_FOR_TARGET=''
COMPILER_AS_FOR_TARGET=''
COMPILER_LD_FOR_TARGET=''
COMPILER_NM_FOR_TARGET=''
CONFIGURE_GDB_TK=''
CPPFLAGS=''
CXX=''
CXXFLAGS=''
CXXFLAGS_FOR_BUILD=''
CXXFLAGS_FOR_TARGET=''
CXX_FOR_BUILD='g++'
CXX_FOR_TARGET=''
DEBUG_PREFIX_CFLAGS_FOR_TARGET=''
DEFS=''
DLLTOOL=''
DLLTOOL_FOR_BUILD='dlltool'
DLLTOOL_FOR_TARGET=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EXEEXT=''
EXPECT=''
EXTRA_CONFIGARGS_LIBJAVA='--disable-static'
FLAGS_FOR_TARGET=''
FLEX=''
GCC_FOR_TARGET=''
GCC_SHLIB_SUBDIR=''
GCJ_FOR_BUILD='gcj'
GCJ_FOR_TARGET=''
GDB_TK=''
GFORTRAN_FOR_BUILD='gfortran'
GFORTRAN_FOR_TARGET=''
GNATBIND=''
GNATMAKE=''
GOC_FOR_BUILD='gccgo'
GOC_FOR_TARGET=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_GDB_TK=''
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
LD=''
LDFLAGS=''
LDFLAGS_FOR_BUILD=''
LDFLAGS_FOR_TARGET=''
LD_FOR_BUILD='ld'
LD_FOR_TARGET=''
LEX=''
LIBOBJS=''
LIBS=''
LIPO=''
LIPO_FOR_TARGET=''
LN='ln'
LN_S='ln -s'
LTLIBOBJS=''
M4=''
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO=''
NM=''
NM_FOR_BUILD='nm'
NM_FOR_TARGET=''
OBJCOPY=''
OBJDUMP=''
OBJDUMP_FOR_TARGET=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_URL=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
POSTSTAGE1_CONFIGURE_FLAGS=''
RANLIB=''
RANLIB_FOR_BUILD='ranlib'
RANLIB_FOR_TARGET=''
RAW_CXX_FOR_TARGET=''
READELF=''
READELF_FOR_TARGET=''
RPATH_ENVVAR=''
RUNTEST=''
SED='/bin/sed'
SHELL='/bin/bash'
STRIP=''
STRIP_FOR_TARGET=''
SYSROOT_CFLAGS_FOR_TARGET=''
TOPLEVEL_CONFIGURE_ARGUMENTS='/home/bertone/Scaricati/src/newlib-1.20.0/configure --host=mipsel-elf --prefix=/home/bertone/programmazione/crosscompiler/mips/install'
WINDMC=''
WINDMC_FOR_BUILD='windmc'
WINDMC_FOR_TARGET=''
WINDRES=''
WINDRES_FOR_BUILD='windres'
WINDRES_FOR_TARGET=''
YACC=''
ac_ct_CC=''
ac_ct_CXX=''
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_configargs=''
build_configdirs='build-libiberty build-texinfo build-flex build-bison build-m4 build-fixincludes'
build_cpu='x86_64'
build_libsubdir='build-x86_64-unknown-linux-gnu'
build_noncanonical='x86_64-unknown-linux-gnu'
build_os='linux-gnu'
build_subdir='build-x86_64-unknown-linux-gnu'
build_tooldir=''
build_vendor='unknown'
clooginc=''
clooglibs=''
compare_exclusions=''
configdirs='intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
do_compare=''
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
extra_host_libiberty_configure_flags=''
extra_mpc_gmp_configure_flags=''
extra_mpc_mpfr_configure_flags=''
extra_mpfr_configure_flags=''
gmpinc=''
gmplibs=''
host='mipsel-unknown-elf'
host_alias='mipsel-elf'
host_configargs=''
host_cpu='mipsel'
host_noncanonical='mipsel-elf'
host_os='elf'
host_subdir='.'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
poststage1_ldflags=''
poststage1_libs=''
pplinc=''
ppllibs=''
prefix='/home/bertone/programmazione/crosscompiler/mips/install'
program_transform_name='s,y,y,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
stage1_cflags=''
stage1_checking=''
stage1_languages=''
stage1_ldflags=''
stage1_libs=''
stage2_werror_flag=''
sysconfdir='${prefix}/etc'
target='mipsel-unknown-elf'
target_alias=''
target_configargs=''
target_configdirs='target-libgcc target-libgloss target-newlib target-libgomp target-libitm target-libstdc++-v3 target-libmudflap target-libssp target-libquadmath target-libgfortran target-boehm-gc target-libffi target-zlib target-libjava target-libobjc target-libada target-libgo target-rda'
target_cpu='mipsel'
target_noncanonical='mipsel-elf'
target_os='elf'
target_subdir='mipsel-elf'
target_vendor='unknown'
tooldir=''
## ------------------- ##
## File substitutions. ##
## ------------------- ##
alphaieee_frag=''
host_makefile_frag='/dev/null'
ospace_frag=''
serialization_dependencies=''
target_makefile_frag=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
configure: exit 77
[-- Attachment #3: config_eglibc.log --]
[-- Type: application/octet-stream, Size: 28078 bytes --]
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by GNU C Library configure (see version.h), which was
generated by GNU Autoconf 2.63. Invocation command line was
$ /home/bertone/Scaricati/src/eglibc/eglibc/libc/configure --prefix=/usr --with-headers=/home/bertone/programmazione/crosscompiler/mips/sysroot/usr/include --build=i686-pc-linux-gnu --host=mipsel-elf --disable-profile --without-gd --without-cvs --enable-add-ons
## --------- ##
## Platform. ##
## --------- ##
hostname = KennyNotebook
uname -m = x86_64
uname -r = 2.6.35-31-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Mon Nov 28 19:29:10 UTC 2011
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/soclib/utils/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/binutils/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2029: checking build system type
configure:2047: result: i686-pc-linux-gnu
configure:2069: checking host system type
configure:2084: result: mipsel-unknown-elf
configure:2115: checking for mipsel-elf-gcc
configure:2142: result: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
configure:2414: checking for C compiler version
configure:2422: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc --version >&5
mipsel-elf-gcc (GCC) 4.6.2
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2426: $? = 0
configure:2433: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -v >&5
Using built-in specs.
COLLECT_GCC=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
COLLECT_LTO_WRAPPER=/home/bertone/programmazione/crosscompiler/mips/install/libexec/gcc/mipsel-elf/4.6.2/lto-wrapper
Target: mipsel-elf
Configured with: ../../../../../Scaricati/src/gcc-4.6.2/configure --target=mipsel-elf --prefix=/home/bertone/programmazione/crosscompiler/mips/install --without-headers --with-newlib --disable-shared --disable-threads --disable-libssp --disable-libgomp --disable-libmudflap --enable-languages=c --disable-werror
Thread model: single
gcc version 4.6.2 (GCC)
configure:2437: $? = 0
configure:2444: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -V >&5
mipsel-elf-gcc: error: unrecognized option '-V'
mipsel-elf-gcc: fatal error: no input files
compilation terminated.
configure:2448: $? = 1
configure:2452: checking for suffix of object files
configure:2478: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -c conftest.c >&5
configure:2482: $? = 0
configure:2507: result: o
configure:2511: checking whether we are using the GNU C compiler
configure:2540: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -c conftest.c >&5
configure:2547: $? = 0
configure:2564: result: yes
configure:2573: checking whether /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc accepts -g
configure:2603: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -c -g conftest.c >&5
configure:2610: $? = 0
configure:2711: result: yes
configure:2728: checking for /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc option to accept ISO C89
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -c -g -O2 conftest.c >&5
conftest.c:9:19: fatal error: stdio.h: No such file or directory
compilation terminated.
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -qlanglvl=extc89 -c -g -O2 conftest.c >&5
mipsel-elf-gcc: error: unrecognized option '-qlanglvl=extc89'
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -qlanglvl=ansi -c -g -O2 conftest.c >&5
mipsel-elf-gcc: error: unrecognized option '-qlanglvl=ansi'
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -std -c -g -O2 conftest.c >&5
cc1: error: unrecognized command line option '-std'
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -Ae -c -g -O2 conftest.c >&5
<command-line>:0:1: error: missing '(' after predicate
conftest.c:9:19: fatal error: stdio.h: No such file or directory
compilation terminated.
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -Aa -D_HPUX_SOURCE -c -g -O2 conftest.c >&5
<command-line>:0:1: error: missing '(' after predicate
conftest.c:9:19: fatal error: stdio.h: No such file or directory
compilation terminated.
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2802: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -Xc -D__EXTENSIONS__ -c -g -O2 conftest.c >&5
mipsel-elf-gcc: error: unrecognized option '-Xc'
configure:2809: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p[i];
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
|
| /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
| function prototypes and stuff, but not '\xHH' hex character constants.
| These don't provoke an error unfortunately, instead are silently treated
| as 'x'. The following induces an error, until -std is added to get
| proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
| array size at least. It's necessary to write '\x00'==0 to get something
| that's true only with -std. */
| int osf4_cc_array ['\x00' == 0 ? 1 : -1];
|
| /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
| inside strings and character constants. */
| #define FOO(x) 'x'
| int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
|
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2835: result: unsupported
configure:2855: checking for gcc
configure:2882: result: gcc
configure:2900: checking how to run the C preprocessor
configure:2940: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E conftest.c
configure:2947: $? = 0
configure:2978: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E conftest.c
conftest.c:8:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:2985: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3018: result: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E
configure:3047: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E conftest.c
configure:3054: $? = 0
configure:3085: /home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E conftest.c
conftest.c:8:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:3092: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "GNU C Library"
| #define PACKAGE_TARNAME "glibc"
| #define PACKAGE_VERSION "(see version.h)"
| #define PACKAGE_STRING "GNU C Library (see version.h)"
| #define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3146: checking for mipsel-elf-g++
configure:3176: result: no
configure:3146: checking for mipsel-elf-c++
configure:3176: result: no
configure:3146: checking for mipsel-elf-gpp
configure:3176: result: no
configure:3146: checking for mipsel-elf-aCC
configure:3176: result: no
configure:3146: checking for mipsel-elf-CC
configure:3176: result: no
configure:3146: checking for mipsel-elf-cxx
configure:3176: result: no
configure:3146: checking for mipsel-elf-cc++
configure:3176: result: no
configure:3146: checking for mipsel-elf-cl.exe
configure:3176: result: no
configure:3146: checking for mipsel-elf-FCC
configure:3176: result: no
configure:3146: checking for mipsel-elf-KCC
configure:3176: result: no
configure:3146: checking for mipsel-elf-RCC
configure:3176: result: no
configure:3146: checking for mipsel-elf-xlC_r
configure:3176: result: no
configure:3146: checking for mipsel-elf-xlC
configure:3176: result: no
configure:3190: checking for g++
configure:3206: found /usr/bin/g++
configure:3217: result: g++
configure:3233: WARNING: using cross tools not prefixed with host triplet
configure:3244: checking for C++ compiler version
configure:3252: g++ --version >&5
g++ (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3256: $? = 0
configure:3263: g++ -v >&5
Using built-in specs.
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.4.4-14ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.4 --enable-shared --enable-multiarch --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.4 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5)
configure:3267: $? = 0
configure:3274: g++ -V >&5
g++: '-V' option must have argument
configure:3278: $? = 1
configure:3281: checking whether we are using the GNU C++ compiler
configure:3310: g++ -c conftest.cpp >&5
configure:3317: $? = 0
configure:3334: result: yes
configure:3343: checking whether g++ accepts -g
configure:3373: g++ -c -g conftest.cpp >&5
configure:3380: $? = 0
configure:3481: result: yes
configure:4134: running configure fragment for add-on libidn
configure:4134: running configure fragment for add-on nptl
configure:4190: checking add-on ports for preconfigure fragments
configure:4197: result:
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=set
ac_cv_env_CC_value=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=i686-pc-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=mipsel-elf
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=mipsel-unknown-elf
ac_cv_objext=o
ac_cv_prog_BUILD_CC=gcc
ac_cv_prog_CC=/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc
ac_cv_prog_CPP='/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E'
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_cc_c89=no
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
libc_cv_nss_crypt=no
## ----------------- ##
## Output variables. ##
## ----------------- ##
AR='mipsel-elf-ar'
AS=''
ASFLAGS_config=''
AUTOCONF=''
AWK=''
BASH_SHELL=''
BISON=''
BUILD_CC='gcc'
CC='/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc'
CFLAGS='-g -O2'
CPP='/home/bertone/programmazione/crosscompiler/mips/install/bin/mipsel-elf-gcc -E'
CPPFLAGS=''
CXX='g++'
CXXFLAGS='-g -O2'
CXX_SYSINCLUDES=''
DEFINES=''
DEFS=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
GREP=''
INSTALL_DATA=''
INSTALL_INFO=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
KSH=''
LD=''
LDFLAGS=''
LIBGD=''
LIBOBJS=''
LIBS=''
LN_S=''
LTLIBOBJS=''
MAKE=''
MAKEINFO=''
MIG=''
MSGFMT=''
NM=''
OBJCOPY=''
OBJDUMP=''
OBJEXT='o'
PACKAGE_BUGREPORT='http://sourceware.org/bugzilla/'
PACKAGE_NAME='GNU C Library'
PACKAGE_STRING='GNU C Library (see version.h)'
PACKAGE_TARNAME='glibc'
PACKAGE_VERSION='(see version.h)'
PATH_SEPARATOR=':'
PERL=''
PKGVERSION='(EGLIBC) '
PKGVERSION_TEXI='(EGLIBC) '
PWD_P=''
READELF=''
RELEASE=''
REPORT_BUGS_TEXI='@uref{http://www.eglibc.org/issues/}'
REPORT_BUGS_TO='<http://www.eglibc.org/issues/>'
SED=''
SHELL='/bin/bash'
SYSINCLUDES=''
VERSION=''
VERSIONING=''
ac_ct_CC=''
ac_ct_CXX='g++'
add_on_subdirs=' libidn'
add_ons='libidn ports'
all_warnings=''
base_machine='mips'
bindir='${exec_prefix}/bin'
bindnow='no'
bounded='no'
build='i686-pc-linux-gnu'
build_alias='i686-pc-linux-gnu'
build_cpu='i686'
build_os='linux-gnu'
build_vendor='pc'
cross_compiling='yes'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
elf='no'
enable_check_abi='no'
exceptions=''
exec_prefix='NONE'
fno_unit_at_a_time=''
force_install='yes'
gnu89_inline=''
have_libaudit=''
have_libcap=''
have_selinux=''
host='mipsel-unknown-elf'
host_alias='mipsel-elf'
host_cpu='mipsel'
host_os='elf'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
ldd_rewrite_script=''
libc_cv_Bgroup=''
libc_cv_as_i686=''
libc_cv_as_needed=''
libc_cv_cc_avx=''
libc_cv_cc_fma4=''
libc_cv_cc_novzeroupper=''
libc_cv_cc_sse4=''
libc_cv_cc_submachine=''
libc_cv_cc_with_libunwind=''
libc_cv_cpp_asm_debuginfo=''
libc_cv_forced_unwind=''
libc_cv_fpie=''
libc_cv_gcc_static_libgcc=''
libc_cv_gcc_unwind_find_fde=''
libc_cv_hashstyle=''
libc_cv_have_bash2=''
libc_cv_have_initfini=''
libc_cv_have_ksh=''
libc_cv_libgcc_s_suffix=''
libc_cv_localedir=''
libc_cv_nss_crypt='no'
libc_cv_output_format=''
libc_cv_pic_default=''
libc_cv_rootsbindir=''
libc_cv_slibdir=''
libc_cv_ssp=''
libc_cv_sysconfdir=''
libc_cv_z_combreloc=''
libc_cv_z_execstack=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mach_interface_list=''
mandir='${datarootdir}/man'
multi_arch='default'
nopic_initfini=''
old_glibc_headers=''
oldest_abi='default'
oldincludedir='/usr/include'
omitfp='no'
pdfdir='${docdir}'
prefix='/usr'
profile='no'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
shared='default'
sharedstatedir='${prefix}/com'
sizeof_long_double=''
static='yes'
static_nss='no'
subdirs=' '
submachine=''
sysconfdir='${prefix}/etc'
sysdeps_add_ons=''
sysnames=''
target_alias=''
use_default_link='default'
use_ldconfig=''
with_fp='yes'
xcoff='no'
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "GNU C Library"
#define PACKAGE_TARNAME "glibc"
#define PACKAGE_VERSION "(see version.h)"
#define PACKAGE_STRING "GNU C Library (see version.h)"
#define PACKAGE_BUGREPORT "http://sourceware.org/bugzilla/"
#define PKGVERSION "(EGLIBC) "
#define REPORT_BUGS_TO "<http://www.eglibc.org/issues/>"
#define HAVE_LIBIDN 1
configure: exit 1
[-- Attachment #4: Type: text/plain, Size: 71 bytes --]
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-01-06 13:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-06 13:36 Problems with a mips cross compiler Berto20
2012-01-06 13:40 Berto20
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).