* cross-gdb with expat support
@ 2015-04-03 6:49 Thomas T
2015-04-09 11:52 ` Fwd: " Thomas T
0 siblings, 1 reply; 3+ messages in thread
From: Thomas T @ 2015-04-03 6:49 UTC (permalink / raw)
To: crossgcc
Hi,
as a lot of others before I have a problem to compile a toolchain with
a cross-gdb. I try to build a toolchain for
[EXTRA] build = x86_64-unknown-linux-gnu
[EXTRA] host = x86_64-w64-mingw32
[EXTRA] target = arm-none-linux-gnueabihf
The first problem I solved by myself. I removed the multiple
definitions of caddr_t.
But now I fail to build the static cross-gdb, with the well known
error "expat is missing or unusable". Crosstool-NG is the newest one
1.20, I also tried git/master. I already looked for a patch/ideas at
the mailing list, patchwork, google, tried several changes in
300-gdb.sh but didn't found a solution...
The build PC runs on Ubuntu 14.04. And, even I do not know if it is
required as the host is a WindowsPC I installed libexpat1-dev.
Is there currently a well known problem? Which additional infos shall
I provide, any ideas?
Best Regards
Thomas
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 3+ messages in thread
* Fwd: cross-gdb with expat support
2015-04-03 6:49 cross-gdb with expat support Thomas T
@ 2015-04-09 11:52 ` Thomas T
2015-04-09 11:54 ` Ray Donnelly
0 siblings, 1 reply; 3+ messages in thread
From: Thomas T @ 2015-04-09 11:52 UTC (permalink / raw)
To: crossgcc
FYI, with the following two patches I build a working Microsoft
Windows cross compile toolchain including GDB.
diff -uNr x-tools_org/bin/lib/ct-ng.1.20.0/scripts/build/debug/300-gdb.sh
x-tools/bin/lib/ct-ng.1.20.0/scripts/build/debug/300-gdb.sh
--- x-tools_org/bin/lib/ct-ng.1.20.0/scripts/build/debug/300-gdb.sh
2015-04-09 13:16:16.000000000 +0200
+++ x-tools/bin/lib/ct-ng.1.20.0/scripts/build/debug/300-gdb.sh
2015-04-09 13:02:51.535477908 +0200
@@ -16,6 +16,9 @@
if [ "${CT_GDB_CROSS}" = y ]; then
need_gdb_src=y
+ if [ "${CT_TOOLCHAIN_TYPE}" = "canadian" ]; then
+ need_expat_src=y
+ fi
fi
if [ "${CT_GDB_GDBSERVER}" = "y" ]; then
@@ -130,6 +133,26 @@
cd "${CT_BUILD_DIR}/build-gdb-cross"
cross_extra_config=("${extra_config[@]}")
+
+
+ if [ "${CT_TOOLCHAIN_TYPE}" = "canadian" ]; then
+ # Build libexpat
+ CT_DoLog EXTRA "Building static cross expat"
+ CT_mkdir_pushd "${CT_WORK_DIR}/${CT_REAL_HOST}/build-expat-cross"
+
+ CT_DoExecLog CFG \
+ "${CT_SRC_DIR}/expat-2.1.0/configure"\
+ --host=${CT_HOST} \
+ --prefix="${CT_WORK_DIR}/${CT_REAL_HOST}/libexpat-cross"
+
+ CT_DoLog EXTRA "Building cross-expat"
+ CT_DoExecLog ALL make
+ CT_DoLog EXTRA "Install cross-expat"
+ CT_DoExecLog ALL make install
+ CT_Popd
+ cross_extra_config+=("--with-libexpat-prefix=${CT_WORK_DIR}/${CT_REAL_HOST}/libexpat-cross")
+ fi
+
cross_extra_config+=("--enable-expat")
cross_extra_config+=("--with-expat=yes")
case "${CT_THREADS}" in
diff -r -u ../4.9.2/gcc/configure ./gcc/configure
--- 4.9.2/gcc/configure 2013-01-08 11:41:18.212779007 -0800
+++ 4.9.2/gcc/configure 2013-01-08 11:41:49.396779627 -0800
@@ -9252,7 +9252,7 @@
else
cat >>confdefs.h <<_ACEOF
-#define caddr_t char *
+//#define caddr_t char *
_ACEOF
fi
---------- Forwarded message ----------
From: Thomas T <thomasmailinglists9@gmail.com>
Date: 2015-04-03 8:49 GMT+02:00
Subject: cross-gdb with expat support
To: crossgcc@sourceware.org
Hi,
as a lot of others before I have a problem to compile a toolchain with
a cross-gdb. I try to build a toolchain for
[EXTRA] build = x86_64-unknown-linux-gnu
[EXTRA] host = x86_64-w64-mingw32
[EXTRA] target = arm-none-linux-gnueabihf
The first problem I solved by myself. I removed the multiple
definitions of caddr_t.
But now I fail to build the static cross-gdb, with the well known
error "expat is missing or unusable". Crosstool-NG is the newest one
1.20, I also tried git/master. I already looked for a patch/ideas at
the mailing list, patchwork, google, tried several changes in
300-gdb.sh but didn't found a solution...
The build PC runs on Ubuntu 14.04. And, even I do not know if it is
required as the host is a WindowsPC I installed libexpat1-dev.
Is there currently a well known problem? Which additional infos shall
I provide, any ideas?
Best Regards
Thomas
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: cross-gdb with expat support
2015-04-09 11:52 ` Fwd: " Thomas T
@ 2015-04-09 11:54 ` Ray Donnelly
0 siblings, 0 replies; 3+ messages in thread
From: Ray Donnelly @ 2015-04-09 11:54 UTC (permalink / raw)
To: Thomas T; +Cc: crossgcc
On Thu, Apr 9, 2015 at 12:51 PM, Thomas T <thomasmailinglists9@gmail.com> wrote:
> FYI, with the following two patches I build a working Microsoft
> Windows cross compile toolchain including GDB.
>
>
> diff -uNr x-tools_org/bin/lib/ct-ng.1.20.0/scripts/build/debug/300-gdb.sh
> x-tools/bin/lib/ct-ng.1.20.0/scripts/build/debug/300-gdb.sh
> --- x-tools_org/bin/lib/ct-ng.1.20.0/scripts/build/debug/300-gdb.sh
> 2015-04-09 13:16:16.000000000 +0200
> +++ x-tools/bin/lib/ct-ng.1.20.0/scripts/build/debug/300-gdb.sh
> 2015-04-09 13:02:51.535477908 +0200
> @@ -16,6 +16,9 @@
>
> if [ "${CT_GDB_CROSS}" = y ]; then
> need_gdb_src=y
> + if [ "${CT_TOOLCHAIN_TYPE}" = "canadian" ]; then
> + need_expat_src=y
> + fi
> fi
>
> if [ "${CT_GDB_GDBSERVER}" = "y" ]; then
> @@ -130,6 +133,26 @@
> cd "${CT_BUILD_DIR}/build-gdb-cross"
>
> cross_extra_config=("${extra_config[@]}")
> +
> +
> + if [ "${CT_TOOLCHAIN_TYPE}" = "canadian" ]; then
> + # Build libexpat
> + CT_DoLog EXTRA "Building static cross expat"
> + CT_mkdir_pushd "${CT_WORK_DIR}/${CT_REAL_HOST}/build-expat-cross"
> +
> + CT_DoExecLog CFG \
> + "${CT_SRC_DIR}/expat-2.1.0/configure"\
> + --host=${CT_HOST} \
> + --prefix="${CT_WORK_DIR}/${CT_REAL_HOST}/libexpat-cross"
> +
> + CT_DoLog EXTRA "Building cross-expat"
> + CT_DoExecLog ALL make
> + CT_DoLog EXTRA "Install cross-expat"
> + CT_DoExecLog ALL make install
> + CT_Popd
> + cross_extra_config+=("--with-libexpat-prefix=${CT_WORK_DIR}/${CT_REAL_HOST}/libexpat-cross")
> + fi
> +
> cross_extra_config+=("--enable-expat")
> cross_extra_config+=("--with-expat=yes")
> case "${CT_THREADS}" in
>
>
> diff -r -u ../4.9.2/gcc/configure ./gcc/configure
> --- 4.9.2/gcc/configure 2013-01-08 11:41:18.212779007 -0800
> +++ 4.9.2/gcc/configure 2013-01-08 11:41:49.396779627 -0800
> @@ -9252,7 +9252,7 @@
> else
>
> cat >>confdefs.h <<_ACEOF
> -#define caddr_t char *
> +//#define caddr_t char *
> _ACEOF
>
> fi
>
>
>
I think expat should be added as a companion library. I have patches
to do that if Bryan agrees that's the way to proceed.
>
>
>
> ---------- Forwarded message ----------
> From: Thomas T <thomasmailinglists9@gmail.com>
> Date: 2015-04-03 8:49 GMT+02:00
> Subject: cross-gdb with expat support
> To: crossgcc@sourceware.org
>
>
> Hi,
>
> as a lot of others before I have a problem to compile a toolchain with
> a cross-gdb. I try to build a toolchain for
>
> [EXTRA] build = x86_64-unknown-linux-gnu
> [EXTRA] host = x86_64-w64-mingw32
> [EXTRA] target = arm-none-linux-gnueabihf
>
> The first problem I solved by myself. I removed the multiple
> definitions of caddr_t.
>
> But now I fail to build the static cross-gdb, with the well known
> error "expat is missing or unusable". Crosstool-NG is the newest one
> 1.20, I also tried git/master. I already looked for a patch/ideas at
> the mailing list, patchwork, google, tried several changes in
> 300-gdb.sh but didn't found a solution...
>
> The build PC runs on Ubuntu 14.04. And, even I do not know if it is
> required as the host is a WindowsPC I installed libexpat1-dev.
>
> Is there currently a well known problem? Which additional infos shall
> I provide, any ideas?
>
> Best Regards
> Thomas
>
> --
> For unsubscribe information see http://sourceware.org/lists.html#faq
>
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-04-09 11:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-03 6:49 cross-gdb with expat support Thomas T
2015-04-09 11:52 ` Fwd: " Thomas T
2015-04-09 11:54 ` Ray Donnelly
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).