crosstool-NG Build ERROR

crosstool-NG Build ERROR

[Shaahul Hameed]

I am a newbie to embedded linux and am trying to build crosstool-ng
toolchain with arm-unknown-linux-uclibc-gnueabi sample.

I have 2 questions.

(1) When I try to load arm-unknown-linux-uclibcgnueabi sample with the
following command, which Linux Kernel version should be chosen out of
the 15 choices?

--------------------------------------------------
~/felabs/sysdev/toolchain/crosstool-ng-1.5.3$ ./ct-ng
arm-unknown-linux-uclibcgnueabi
CONF config/config.in
*
* Restart config...
*
*
* Operating System
*
Target OS
1. bare-metal (KERNEL_bare_metal)
> 2. linux (KERNEL_linux)
choice[1-2]: 2
Get kernel headers from:
> 1. kernel's 'headers_install' (KERNEL_LINUX_INSTALL)
2. Use custom headers (KERNEL_LINUX_USE_CUSTOM_HEADERS)
choice[1-2]: 1
Check installed headers (KERNEL_LINUX_INSTALL_CHECK) [Y/n/?] y
Linux kernel version
> 1. 2.6.31.1 (KERNEL_V_2_6_31_1)
2. 2.6.31 (KERNEL_V_2_6_31)
3. 2.6.30.8 (KERNEL_V_2_6_30_8) (NEW)
4. 2.6.30.7 (KERNEL_V_2_6_30_7) (NEW)
5. 2.6.30.6 (KERNEL_V_2_6_30_6)
6. 2.6.30.5 (KERNEL_V_2_6_30_5)
7. 2.6.30.4 (KERNEL_V_2_6_30_4)
8. 2.6.30.3 (KERNEL_V_2_6_30_3)
9. 2.6.30.2 (KERNEL_V_2_6_30_2)
10. 2.6.30.1 (KERNEL_V_2_6_30_1)
11. 2.6.30 (KERNEL_V_2_6_30)
12. 2.6.29.6 (KERNEL_V_2_6_29_6)
13. 2.6.28.10 (KERNEL_V_2_6_28_10)
14. 2.6.27.35 (long-term stable) (KERNEL_V_2_6_27_35)
15. Other version (EXPERIMENTAL) (KERNEL_V_select)
choice[1-15]:
----------------------------------------------------------


(2) Hitting "Enter" in the previous command selects the default kernel 2.6.31.1.
After configuring with menuconfig, I ran ./ctng build, but got the
following ERROR. Could you please let me know where I could be going
wrong?

[ALL ] linux-2.6.31.1/arch/m68k/kernel/ints.c
[ALL ] linux-2.6.31.1/arch/m68k/kernel/m68k_ksyms.c
[ALL ] linux-2.6.31.1/arch/m68k/kernel/module.c
[ALL ] linux-2.6.31.1/arch/m68k/kernel/module.lds
[ALL ] linux-2.6.31.1/arch/m68k/kernel/process.c
[ALL ] linux-2.6.31.1/arch/m68k/kernel/ptrace.c
[ALL ] linux-2.6.31.1/arch/m68k/kernel/setup.c
[ALL ] linux-2.6.31.1/arch/m68k/kernel/signal.c
[ALL ]
[ALL ] bzip2: Compressed file ends unexpectedly;
[ALL ] perhaps it is corrupted? *Possible* reason follows.
[ALL ] bzip2: Inappropriate ioctl for device
[ALL ] Input file = (stdin), output file = (stdout)
[ALL ]
[ALL ] It is possible that the compressed file(s) have become corrupted.
[ALL ] You can use the -tvv option to test integrity of such files.
[ALL ]
[ALL ] You can use the `bzip2recover' program to attempt to recover
[ALL ] data from undamaged sections of corrupted files.
[ALL ]
[ALL ] tar: Unexpected EOF in archive
[ALL ] tar: Unexpected EOF in archive
[ALL ] tar: Error is not recoverable: exiting now
[ERROR] Build failed in step 'Extracting and patching toolchain components'
[ERROR] Error happened in
'/home/shaahul/felabs/sysdev/toolchain/crosstool-ng-1.5.3/scripts/functions'
in function 'CT_DoExecLog' (line unknown, sorry)
[ERROR] called from
'/home/shaahul/felabs/sysdev/toolchain/crosstool-ng-1.5.3/scripts/functions'
at line # 565 in function 'CT_Extract'
[ERROR] called from
'/home/shaahul/felabs/sysdev/toolchain/crosstool-ng-1.5.3/scripts/build/kernel/linux.sh'
at line # 25 in function 'do_kernel_extract'
[ERROR] called from
'/home/shaahul/felabs/sysdev/toolchain/crosstool-ng-1.5.3/scripts/crosstool-NG.sh'
at line # 510 in function 'main'
[ERROR] Look at
'/usr/local/xtools/arm-unknown-linux-uclibcgnueabi/build.log' for more
info on this error.
[ERROR] (elapsed: 71:27.80)

--
For unsubscribe information see http://sourceware.org/lists.html#faq

Re: crosstool-NG Build ERROR

[Shaahul Hameed]

[-- Attachment #1: Type: text/plain, Size: 5539 bytes --]

Looks like the problem was with the linux tarball which had not been
downloaded completely. I just removed the old linux tarball and
started BUILD again which went thru with the following libtool.m4
ERROR.

--------------------------------------------------------------
..
..
[INFO ]  Installing C library: done in 141.66s (at 64:42)
[INFO ]  =================================================================
[INFO ]  Installing final compiler
[EXTRA]    Configuring final compiler
[EXTRA]    Building final compiler
[ERROR]    libtool.m4: error: problem compiling FC test program
[EXTRA]    Installing final compiler
[INFO ]  Installing final compiler: done in 906.63s (at 79:48)
[INFO ]  =================================================================
[INFO ]  Installing GMP for the target
..
..
-----------------------------------------------------------------------

However, after this error the build seem to have gone fine as can be seen below.

-----------------------------------------------------------------------
..
..
[INFO ]  =================================================================
[INFO ]  Cleaning-up the toolchain's directory
[EXTRA]    Installing the populate helper
[EXTRA]    Creating toolchain aliases
[EXTRA]    Installing toolchain wrappers
[EXTRA]    Removing access to the build system tools
[EXTRA]    Removing installed documentation
[INFO ]  Cleaning-up the toolchain's directory: done in 1.93s (at 95:34)
[INFO ]  Build completed at 20100131.230227
[INFO ]  (elapsed: 95:34.56)
[INFO ]  Finishing installation (may take a few seconds)...
[95:34] / ~/felabs/sysdev/toolchain/crosstool-ng-1.5.3$
-----------------------------------------------------------------------

PLEASE LET ME KNOW IF I CAN *IGNORE* the libtool.m4 error? BUILD LOG Attached.


Thanks for your help!



On Sun, Jan 31, 2010 at 8:34 PM, Shaahul Hameed <shaahulhameed@gmail.com> wrote:
> I am a newbie to embedded linux and am trying to build crosstool-ng
> toolchain with arm-unknown-linux-uclibc-gnueabi sample.
>
> I have 2 questions.
>
> (1) When I try to load arm-unknown-linux-uclibcgnueabi sample with the
> following command, which Linux Kernel version should be chosen out of
> the 15 choices?
>
> --------------------------------------------------
> ~/felabs/sysdev/toolchain/crosstool-ng-1.5.3$ ./ct-ng
> arm-unknown-linux-uclibcgnueabi
> CONF config/config.in
> *
> * Restart config...
> *
> *
> * Operating System
> *
> Target OS
> 1. bare-metal (KERNEL_bare_metal)
>> 2. linux (KERNEL_linux)
> choice[1-2]: 2
> Get kernel headers from:
>> 1. kernel's 'headers_install' (KERNEL_LINUX_INSTALL)
> 2. Use custom headers (KERNEL_LINUX_USE_CUSTOM_HEADERS)
> choice[1-2]: 1
> Check installed headers (KERNEL_LINUX_INSTALL_CHECK) [Y/n/?] y
> Linux kernel version
>> 1. 2.6.31.1 (KERNEL_V_2_6_31_1)
> 2. 2.6.31 (KERNEL_V_2_6_31)
> 3. 2.6.30.8 (KERNEL_V_2_6_30_8) (NEW)
> 4. 2.6.30.7 (KERNEL_V_2_6_30_7) (NEW)
> 5. 2.6.30.6 (KERNEL_V_2_6_30_6)
> 6. 2.6.30.5 (KERNEL_V_2_6_30_5)
> 7. 2.6.30.4 (KERNEL_V_2_6_30_4)
> 8. 2.6.30.3 (KERNEL_V_2_6_30_3)
> 9. 2.6.30.2 (KERNEL_V_2_6_30_2)
> 10. 2.6.30.1 (KERNEL_V_2_6_30_1)
> 11. 2.6.30 (KERNEL_V_2_6_30)
> 12. 2.6.29.6 (KERNEL_V_2_6_29_6)
> 13. 2.6.28.10 (KERNEL_V_2_6_28_10)
> 14. 2.6.27.35 (long-term stable) (KERNEL_V_2_6_27_35)
> 15. Other version (EXPERIMENTAL) (KERNEL_V_select)
> choice[1-15]:
> ----------------------------------------------------------
>
>
> (2) Hitting "Enter" in the previous command selects the default kernel 2.6.31.1.
> After configuring with menuconfig, I ran ./ctng build, but got the
> following ERROR. Could you please let me know where I could be going
> wrong?
>
> [ALL ] linux-2.6.31.1/arch/m68k/kernel/ints.c
> [ALL ] linux-2.6.31.1/arch/m68k/kernel/m68k_ksyms.c
> [ALL ] linux-2.6.31.1/arch/m68k/kernel/module.c
> [ALL ] linux-2.6.31.1/arch/m68k/kernel/module.lds
> [ALL ] linux-2.6.31.1/arch/m68k/kernel/process.c
> [ALL ] linux-2.6.31.1/arch/m68k/kernel/ptrace.c
> [ALL ] linux-2.6.31.1/arch/m68k/kernel/setup.c
> [ALL ] linux-2.6.31.1/arch/m68k/kernel/signal.c
> [ALL ]
> [ALL ] bzip2: Compressed file ends unexpectedly;
> [ALL ] perhaps it is corrupted? *Possible* reason follows.
> [ALL ] bzip2: Inappropriate ioctl for device
> [ALL ] Input file = (stdin), output file = (stdout)
> [ALL ]
> [ALL ] It is possible that the compressed file(s) have become corrupted.
> [ALL ] You can use the -tvv option to test integrity of such files.
> [ALL ]
> [ALL ] You can use the `bzip2recover' program to attempt to recover
> [ALL ] data from undamaged sections of corrupted files.
> [ALL ]
> [ALL ] tar: Unexpected EOF in archive
> [ALL ] tar: Unexpected EOF in archive
> [ALL ] tar: Error is not recoverable: exiting now
> [ERROR] Build failed in step 'Extracting and patching toolchain components'
> [ERROR] Error happened in
> '/home/shaahul/felabs/sysdev/toolchain/crosstool-ng-1.5.3/scripts/functions'
> in function 'CT_DoExecLog' (line unknown, sorry)
> [ERROR] called from
> '/home/shaahul/felabs/sysdev/toolchain/crosstool-ng-1.5.3/scripts/functions'
> at line # 565 in function 'CT_Extract'
> [ERROR] called from
> '/home/shaahul/felabs/sysdev/toolchain/crosstool-ng-1.5.3/scripts/build/kernel/linux.sh'
> at line # 25 in function 'do_kernel_extract'
> [ERROR] called from
> '/home/shaahul/felabs/sysdev/toolchain/crosstool-ng-1.5.3/scripts/crosstool-NG.sh'
> at line # 510 in function 'main'
> [ERROR] Look at
> '/usr/local/xtools/arm-unknown-linux-uclibcgnueabi/build.log' for more
> info on this error.
> [ERROR] (elapsed: 71:27.80)
>

[-- Attachment #2: build.log.bz2 --]
[-- Type: application/x-bzip2, Size: 712361 bytes --]

[-- Attachment #3: Type: text/plain, Size: 71 bytes --]

--
For unsubscribe information see http://sourceware.org/lists.html#faq

Re: crosstool-NG Build ERROR

[Yann E. MORIN]

Shaahul, All,

On Sunday 31 January 2010 18:42:45 Shaahul Hameed wrote:
> Looks like the problem was with the linux tarball which had not been
> downloaded completely. I just removed the old linux tarball and

Glad to see you managed that one our your own! :-)

> started BUILD again which went thru with the following libtool.m4
> ERROR.
[--SNIP--]
> [INFO ]  Installing final compiler
> [EXTRA]    Configuring final compiler
> [EXTRA]    Building final compiler
> [ERROR]    libtool.m4: error: problem compiling FC test program

Ignore this error. gcc is (somewhat) checking for a Fortran compiler,
even if not needed (uless you want to build the Fortran frontend).

> PLEASE LET ME KNOW IF I CAN *IGNORE* the libtool.m4 error? BUILD LOG Attached.

Please, don't SHOUT! This is community-based, we all have lives in the real
world, and some time can pass from a question to the answer. Most notably
on WE.

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
`------------------------------^-------^------------------^--------------------'



--
For unsubscribe information see http://sourceware.org/lists.html#faq

Re: crosstool-NG Build ERROR

[Shaahul Hameed]

Thanks a lot for your response Yann.

Sorry about the CAPS used in my last post. I didn't mean to shout,
just wanted to highlight my question. Will keep that in mind in my
future posts.

Thanks again.

Shaahul


On Sun, Jan 31, 2010 at 11:21 PM, Yann E. MORIN
<yann.morin.1998@anciens.enib.fr> wrote:
> Shaahul, All,
>
> On Sunday 31 January 2010 18:42:45 Shaahul Hameed wrote:
>> Looks like the problem was with the linux tarball which had not been
>> downloaded completely. I just removed the old linux tarball and
>
> Glad to see you managed that one our your own! :-)
>
>> started BUILD again which went thru with the following libtool.m4
>> ERROR.
> [--SNIP--]
>> [INFO ]  Installing final compiler
>> [EXTRA]    Configuring final compiler
>> [EXTRA]    Building final compiler
>> [ERROR]    libtool.m4: error: problem compiling FC test program
>
> Ignore this error. gcc is (somewhat) checking for a Fortran compiler,
> even if not needed (uless you want to build the Fortran frontend).
>
>> PLEASE LET ME KNOW IF I CAN *IGNORE* the libtool.m4 error? BUILD LOG Attached.
>
> Please, don't SHOUT! This is community-based, we all have lives in the real
> world, and some time can pass from a question to the answer. Most notably
> on WE.
>
> Regards,
> Yann E. MORIN.
>
> --
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> `------------------------------^-------^------------------^--------------------'
>
>
>

--
For unsubscribe information see http://sourceware.org/lists.html#faq

crosstool-ng build error

[swikar]

[-- Attachment #1.1: Type: text/plain, Size: 1872 bytes --]

hi,

I am getting below mentioned error

swikarsoni@swikar-soni:/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng$
bin/ct-ng build
[INFO ]  Performing some trivial sanity checks
[WARN ]  Number of open files 1024 may not be sufficient to build the
toolchain; increasing to 2048
[ERROR]  Your file system in
'/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng/.build'
is *not* case-sensitive!
[ERROR]
[ERROR]  >>
[ERROR]  >>  Build failed in step '(top-level)'
[ERROR]  >>
[ERROR]  >>  Error happened in: CT_Abort[scripts/functions@487]
[ERROR]  >>        called from: CT_TestAndAbort[scripts/functions@507]
[ERROR]  >>        called from: main[scripts/crosstool-NG.sh@123]
[ERROR]  >>
[ERROR]  >>  For more info on this error, look at the file: 'build.log'
[ERROR]  >>  There is a list of known issues, some with workarounds, in:
[ERROR]  >>      https://crosstool-ng.github.io/docs/known-issues/
[ERROR]  >>
[ERROR]  >>  If you feel this is a bug in crosstool-NG, report it at:
[ERROR]  >>      https://github.com/crosstool-ng/crosstool-ng/issues/
[ERROR]  >>
[ERROR]  >>  Make sure your report includes all the information pertinent
to this issue.
[ERROR]  >>  Read the bug reporting guidelines here:
[ERROR]  >>      http://crosstool-ng.github.io/support/
[ERROR]
[ERROR]  (elapsed: 27841302:31.44)
[00:00] / gmake: *** [bin/ct-ng:261: build] Error 1



*ct-ng --version*
swikarsoni@swikar-soni:/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng$
bin/ct-ng --version
GNU Make 4.3
Built for x86_64-pc-linux-gnu
Copyright (C) 1988-2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html
>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

kindly help to resolve this error.

Regards,
Swikar Soni

[-- Attachment #2: .build.log.txt --]
[-- Type: text/plain, Size: 2061 bytes --]

[DEBUG]  Testing '! ( -n  )'
[INFO ]  Performing some trivial sanity checks
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Testing '! ( -n  )'
[DEBUG]  Sanitized 'CT_INSTALL_DIR': '/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng/' -> '/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng/'
[WARN ]  Number of open files 1024 may not be sufficient to build the toolchain; increasing to 2048
[DEBUG]  ==> Executing:  'mkdir' '-p' '/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng/.build'
[DEBUG]  ==> Return status 0
[DEBUG]  ==> Executing:  'rm' '-f' '/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng/.build/backtrace'
[DEBUG]  ==> Return status 0
[DEBUG]  ==> Executing:  'touch' '/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng/.build/foo'
[DEBUG]  ==> Return status 0
[DEBUG]  Testing '! ( -f /mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng/.build/FOO )'
[ERROR]  Your file system in '/mnt/d/embedded_linux_course/toolchain_understanding/crosstool-ng/.build' is *not* case-sensitive!
[ERROR]
[ERROR]  >>
[ERROR]  >>  Build failed in step '(top-level)'
[ERROR]  >>
[ERROR]  >>  Error happened in: CT_Abort[scripts/functions@487]
[ERROR]  >>        called from: CT_TestAndAbort[scripts/functions@507]
[ERROR]  >>        called from: main[scripts/crosstool-NG.sh@123]
[ERROR]  >>
[ERROR]  >>  For more info on this error, look at the file: 'build.log'
[ERROR]  >>  There is a list of known issues, some with workarounds, in:
[ERROR]  >>      https://crosstool-ng.github.io/docs/known-issues/
[ERROR]  >>
[ERROR]  >>  If you feel this is a bug in crosstool-NG, report it at:
[ERROR]  >>      https://github.com/crosstool-ng/crosstool-ng/issues/

[-- Attachment #3: .config --]
[-- Type: application/xml, Size: 14939 bytes --]

Re: crosstool-ng build error

[Tommy Murphy]

[-- Attachment #1: Type: text/plain, Size: 404 bytes --]

> [ERROR]  Your file system in '/mnt/d/embedded_linux_course/toolchain_understandin/crosstool-ng/.build' is *not* case-sensitive!

Isn't this your problem?
Your filesystem isn't case sensitive and building certain stuff (e.g. Linux and maybe also a Linux toolchain) requires a case sensitive filesystem because some Linux headers have the same name distinguished only by case (e.g. Foo.h and foo.h).

Re: crosstool-ng build error

[swikar]

[-- Attachment #1: Type: text/plain, Size: 597 bytes --]

Hi..
Thanks for your reply.
Could you please guide me how to proceed further?
Regards,
Swikar Soni

On Thu, 8 Dec, 2022, 2:31 pm Tommy Murphy, <tommy_murphy@hotmail.com> wrote:

> > [ERROR]  Your file system in
> '/mnt/d/embedded_linux_course/toolchain_understandin/crosstool-ng/.build' is
> *not* case-sensitive!
>
> Isn't this your problem?
> Your filesystem isn't case sensitive and building certain stuff (e.g.
> Linux and maybe also a Linux toolchain) requires a case sensitive
> filesystem because some Linux headers have the same name distinguished only
> by case (e.g. Foo.h and foo.h).
>

Re: crosstool-ng build error

[Bryan Hundven]

[-- Attachment #1: Type: text/plain, Size: 910 bytes --]

You're not on a case sensitive filesystem. Guessing MacOS.

Search for making a case sensitive volume.

-Bryan

On Thu, Dec 8, 2022, 1:11 AM swikar via crossgcc <crossgcc@sourceware.org>
wrote:

> Hi..
> Thanks for your reply.
> Could you please guide me how to proceed further?
> Regards,
> Swikar Soni
>
> On Thu, 8 Dec, 2022, 2:31 pm Tommy Murphy, <tommy_murphy@hotmail.com>
> wrote:
>
> > > [ERROR]  Your file system in
> >
> '/mnt/d/embedded_linux_course/toolchain_understandin/crosstool-ng/.build' is
> > *not* case-sensitive!
> >
> > Isn't this your problem?
> > Your filesystem isn't case sensitive and building certain stuff (e.g.
> > Linux and maybe also a Linux toolchain) requires a case sensitive
> > filesystem because some Linux headers have the same name distinguished
> only
> > by case (e.g. Foo.h and foo.h).
> >
> --
> For unsubscribe information see http://sourceware.org/lists.html#faq
>