* [ITA] libssh2
@ 2021-05-15 20:12 Brian Inglis
2021-05-15 20:36 ` Achim Gratz
2021-05-16 4:32 ` Marco Atzeri
0 siblings, 2 replies; 18+ messages in thread
From: Brian Inglis @ 2021-05-15 20:12 UTC (permalink / raw)
To: cygwin-apps
Need to update curl with libssh2 latest 1.9.0 2019 from current 1.7.0 2016
to support new ciphers etc:
curl SFTP transfer from Cygwin on Win10 to Ubuntu 18.04 fails with Unknown host key type
<https://cygwin.com/pipermail/cygwin/2021-May/248508.html>
The package is hosted @ haxx.se like curl and involves some of the same folks.
Package build is available under Google drive:
<https://drive.google.com/drive/folders/1ge5dmGQX5KEiGdWUYpRf56hAjwSa1xOa>
[Also is anyone aware of any FOSS storage sites out there to replace
Dropbox/Amazon/G/I/One/...-drives?]
--
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
This email may be disturbing to some readers as it contains
too much technical detail. Reader discretion is advised.
[Data in binary units and prefixes, physical quantities in SI.]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-15 20:12 [ITA] libssh2 Brian Inglis
@ 2021-05-15 20:36 ` Achim Gratz
2021-05-16 4:53 ` Brian Inglis
2021-05-16 4:32 ` Marco Atzeri
1 sibling, 1 reply; 18+ messages in thread
From: Achim Gratz @ 2021-05-15 20:36 UTC (permalink / raw)
To: cygwin-apps
Brian Inglis writes:
> [Also is anyone aware of any FOSS storage sites out there to replace
> Dropbox/Amazon/G/I/One/...-drives?]
Depending on who provides your email it might include some online
storage actually. Whether the interface sucks less than the ones above
is questionable. Just get the a web / domain service with their lowest
cost offer…
I really don't care much about the packaged files (personally), so if
you'd just push the package changes to the playground branch so we can
look at it (and see if it builds on AppVeyor) that would be OK for me.
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
Factory and User Sound Singles for Waldorf rackAttack:
http://Synth.Stromeko.net/Downloads.html#WaldorfSounds
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-15 20:12 [ITA] libssh2 Brian Inglis
2021-05-15 20:36 ` Achim Gratz
@ 2021-05-16 4:32 ` Marco Atzeri
2021-05-16 4:54 ` Brian Inglis
` (2 more replies)
1 sibling, 3 replies; 18+ messages in thread
From: Marco Atzeri @ 2021-05-16 4:32 UTC (permalink / raw)
To: cygwin-apps
On 15.05.2021 22:12, Brian Inglis wrote:
> Need to update curl with libssh2 latest 1.9.0 2019 from current 1.7.0 2016
> to support new ciphers etc:
>
> curl SFTP transfer from Cygwin on Win10 to Ubuntu 18.04 fails with
> Unknown host key type
> <https://cygwin.com/pipermail/cygwin/2021-May/248508.html>
>
Hi Brian
builds fine
Testsuite summary for libssh2 -
============================================================================
# TOTAL: 3
# PASS: 3
I changed the maintainership to you
Thanks
Marco
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-16 4:32 ` Marco Atzeri
@ 2021-05-16 4:54 ` Brian Inglis
2021-05-16 8:31 ` calm needs to get restarted Achim Gratz
2021-05-17 5:49 ` [ITA] libssh2 Brian Inglis
2 siblings, 0 replies; 18+ messages in thread
From: Brian Inglis @ 2021-05-16 4:54 UTC (permalink / raw)
To: cygwin-apps
On 2021-05-15 22:32, Marco Atzeri via Cygwin-apps wrote:
> On 15.05.2021 22:12, Brian Inglis wrote:
>> Need to update curl with libssh2 latest 1.9.0 2019 from current 1.7.0 2016
>> to support new ciphers etc:
>> curl SFTP transfer from Cygwin on Win10 to Ubuntu 18.04 fails with Unknown host key type
>> <https://cygwin.com/pipermail/cygwin/2021-May/248508.html>
> builds fine
> Testsuite summary for libssh2 -
> ============================================================================
> # TOTAL: 3
> # PASS: 3
> I changed the maintainership to you
Thanks Marco
--
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
This email may be disturbing to some readers as it contains
too much technical detail. Reader discretion is advised.
[Data in binary units and prefixes, physical quantities in SI.]
^ permalink raw reply [flat|nested] 18+ messages in thread
* calm needs to get restarted
2021-05-16 4:32 ` Marco Atzeri
2021-05-16 4:54 ` Brian Inglis
@ 2021-05-16 8:31 ` Achim Gratz
2021-05-16 9:36 ` Marco Atzeri
2021-05-17 5:49 ` [ITA] libssh2 Brian Inglis
2 siblings, 1 reply; 18+ messages in thread
From: Achim Gratz @ 2021-05-16 8:31 UTC (permalink / raw)
To: cygwin-apps
Marco,
please restart calm when you've fixed whatever went wrong with your
latest package upload, thanks.
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
SD adaptations for Waldorf Q V3.00R3 and Q+ V3.54R2:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: calm needs to get restarted
2021-05-16 8:31 ` calm needs to get restarted Achim Gratz
@ 2021-05-16 9:36 ` Marco Atzeri
2021-05-16 10:45 ` Achim Gratz
0 siblings, 1 reply; 18+ messages in thread
From: Marco Atzeri @ 2021-05-16 9:36 UTC (permalink / raw)
To: cygwin-apps
On 16.05.2021 10:31, Achim Gratz wrote:
>
> Marco,
>
> please restart calm when you've fixed whatever went wrong with your
> latest package upload, thanks.
>
>
> Regards,
> Achim.
>
Sorry I can't
I have not such privilege for what I know
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: calm needs to get restarted
2021-05-16 9:36 ` Marco Atzeri
@ 2021-05-16 10:45 ` Achim Gratz
2021-05-16 11:22 ` Marco Atzeri
0 siblings, 1 reply; 18+ messages in thread
From: Achim Gratz @ 2021-05-16 10:45 UTC (permalink / raw)
To: cygwin-apps
Marco Atzeri via Cygwin-apps writes:
> On 16.05.2021 10:31, Achim Gratz wrote:
>> Marco,
>> please restart calm when you've fixed whatever went wrong with your
>> latest package upload, thanks.
>>
> I have not such privilege for what I know
It got restarted at noon, via cron most likely…
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
Factory and User Sound Singles for Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#WaldorfSounds
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: calm needs to get restarted
2021-05-16 10:45 ` Achim Gratz
@ 2021-05-16 11:22 ` Marco Atzeri
2021-05-17 15:28 ` Jon Turney
0 siblings, 1 reply; 18+ messages in thread
From: Marco Atzeri @ 2021-05-16 11:22 UTC (permalink / raw)
To: cygwin-apps
On 16.05.2021 12:45, Achim Gratz wrote:
> Marco Atzeri via Cygwin-apps writes:
>> On 16.05.2021 10:31, Achim Gratz wrote:
>>> Marco,
>>> please restart calm when you've fixed whatever went wrong with your
>>> latest package upload, thanks.
>>>
>> I have not such privilege for what I know
>
> It got restarted at noon, via cron most likely…
>
>
> Regards,
> Achim.
>
crossing finger does not crash again
note for myself:
do not try complex cancel and upload at the same time.
Split in multiple steps
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: calm needs to get restarted
2021-05-16 11:22 ` Marco Atzeri
@ 2021-05-17 15:28 ` Jon Turney
0 siblings, 0 replies; 18+ messages in thread
From: Jon Turney @ 2021-05-17 15:28 UTC (permalink / raw)
To: cygwin-apps
On 16/05/2021 12:22, Marco Atzeri via Cygwin-apps wrote:
> On 16.05.2021 12:45, Achim Gratz wrote:
>> Marco Atzeri via Cygwin-apps writes:
>>> On 16.05.2021 10:31, Achim Gratz wrote:
>>>> Marco,
>>>> please restart calm when you've fixed whatever went wrong with your
>>>> latest package upload, thanks.
>>>>
>>> I have not such privilege for what I know
cygwin-admin shell access is required to restart it.
>> It got restarted at noon, via cron most likely…
Nope :)
> crossing finger does not crash again
>
> note for myself:
> do not try complex cancel and upload at the same time.
> Split in multiple steps
Yeah, whilst in theory it can handle complex transactions, unfortunately
they are not well tested.
However, in this case, this was all my fault and I broke something with
a recent update.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-16 4:32 ` Marco Atzeri
2021-05-16 4:54 ` Brian Inglis
2021-05-16 8:31 ` calm needs to get restarted Achim Gratz
@ 2021-05-17 5:49 ` Brian Inglis
2021-05-17 6:31 ` Marco Atzeri
2 siblings, 1 reply; 18+ messages in thread
From: Brian Inglis @ 2021-05-17 5:49 UTC (permalink / raw)
To: cygwin-apps
On 2021-05-15 22:32, Marco Atzeri via Cygwin-apps wrote:
> On 15.05.2021 22:12, Brian Inglis wrote:
>> Need to update curl with libssh2 latest 1.9.0 2019 from current 1.7.0 2016
>> to support new ciphers etc:
>>
>> curl SFTP transfer from Cygwin on Win10 to Ubuntu 18.04 fails with Unknown host key type
>> <https://cygwin.com/pipermail/cygwin/2021-May/248508.html>
> builds fine
>
> Testsuite summary for libssh2 -
> ============================================================================
> # TOTAL: 3
> # PASS: 3
>
> I changed the maintainership to you
Thanks Marco
Could someone please also change maintainership of mingw packages:
mingw64-i686-libssh2 ORPHANED (Yaakov Selkowitz)
mingw64-x86_64-libssh2 ORPHANED (Yaakov Selkowitz)
as I also have updates for these, needed to deploy updated libcurl mingw
packages.
--
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
This email may be disturbing to some readers as it contains
too much technical detail. Reader discretion is advised.
[Data in binary units and prefixes, physical quantities in SI.]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-17 5:49 ` [ITA] libssh2 Brian Inglis
@ 2021-05-17 6:31 ` Marco Atzeri
2021-05-17 15:29 ` Jon Turney
0 siblings, 1 reply; 18+ messages in thread
From: Marco Atzeri @ 2021-05-17 6:31 UTC (permalink / raw)
To: cygwin-apps
On 17.05.2021 07:49, Brian Inglis wrote:
> On 2021-05-15 22:32, Marco Atzeri via Cygwin-apps wrote:
>> On 15.05.2021 22:12, Brian Inglis wrote:
>>> Need to update curl with libssh2 latest 1.9.0 2019 from current 1.7.0
>>> 2016
>>
>> I changed the maintainership to you
>
> Thanks Marco
>
> Could someone please also change maintainership of mingw packages:
>
> mingw64-i686-libssh2 ORPHANED (Yaakov Selkowitz)
> mingw64-x86_64-libssh2 ORPHANED (Yaakov Selkowitz)
>
> as I also have updates for these, needed to deploy updated libcurl mingw
> packages.
>
done
Regards
Marco
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-17 6:31 ` Marco Atzeri
@ 2021-05-17 15:29 ` Jon Turney
2021-05-17 16:45 ` Marco Atzeri
0 siblings, 1 reply; 18+ messages in thread
From: Jon Turney @ 2021-05-17 15:29 UTC (permalink / raw)
To: cygwin-apps
On 17/05/2021 07:31, Marco Atzeri via Cygwin-apps wrote:
> On 17.05.2021 07:49, Brian Inglis wrote:
>> On 2021-05-15 22:32, Marco Atzeri via Cygwin-apps wrote:
>>> On 15.05.2021 22:12, Brian Inglis wrote:
>>>> Need to update curl with libssh2 latest 1.9.0 2019 from current
>>>> 1.7.0 2016
>>>
>>> I changed the maintainership to you
>>
>> Thanks Marco
>>
>> Could someone please also change maintainership of mingw packages:
>>
>> mingw64-i686-libssh2 ORPHANED (Yaakov Selkowitz)
>> mingw64-x86_64-libssh2 ORPHANED (Yaakov Selkowitz)
>>
>> as I also have updates for these, needed to deploy updated libcurl mingw
>> packages.
>>
>
> done
>
Hmmm...
https://cygwin.com/git/?p=cygwin-htdocs.git;a=commitdiff;h=151c47f1889486a010954dad556a4f32add67015
... is that what you intended to do?
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-17 15:29 ` Jon Turney
@ 2021-05-17 16:45 ` Marco Atzeri
2021-05-17 17:09 ` Achim Gratz
2021-05-17 17:11 ` Jon Turney
0 siblings, 2 replies; 18+ messages in thread
From: Marco Atzeri @ 2021-05-17 16:45 UTC (permalink / raw)
To: cygwin-apps
On 17.05.2021 17:29, Jon Turney wrote:
> On 17/05/2021 07:31, Marco Atzeri via Cygwin-apps wrote:
>> On 17.05.2021 07:49, Brian Inglis wrote:
>>> On 2021-05-15 22:32, Marco Atzeri via Cygwin-apps wrote:
>>>> On 15.05.2021 22:12, Brian Inglis wrote:
>>>>> Need to update curl with libssh2 latest 1.9.0 2019 from current
>>>>> 1.7.0 2016
>>>>
>>>> I changed the maintainership to you
>>>
>>> Thanks Marco
>>>
>>> Could someone please also change maintainership of mingw packages:
>>>
>>> mingw64-i686-libssh2 ORPHANED (Yaakov Selkowitz)
>>> mingw64-x86_64-libssh2 ORPHANED (Yaakov Selkowitz)
>>>
>>> as I also have updates for these, needed to deploy updated libcurl mingw
>>> packages.
>>>
>>
>> done
>>
>
> Hmmm...
>
> https://cygwin.com/git/?p=cygwin-htdocs.git;a=commitdiff;h=151c47f1889486a010954dad556a4f32add67015
>
>
> ... is that what you intended to do?
oh F**K, not at all
I forgot to filter when using sed.
I did right the first time...
Can you revert it or should I ?
Marco
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-17 16:45 ` Marco Atzeri
@ 2021-05-17 17:09 ` Achim Gratz
2021-05-17 23:09 ` Brian Inglis
2021-05-17 17:11 ` Jon Turney
1 sibling, 1 reply; 18+ messages in thread
From: Achim Gratz @ 2021-05-17 17:09 UTC (permalink / raw)
To: cygwin-apps
Marco Atzeri via Cygwin-apps writes:
>> Hmmm...
>> https://cygwin.com/git/?p=cygwin-htdocs.git;a=commitdiff;h=151c47f1889486a010954dad556a4f32add67015
>>
>> ... is that what you intended to do?
>
>
> oh F**K, not at all
Well, we finally have a maintainer for all that stuff.
;-)
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
Wavetables for the Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#BlofeldUserWavetables
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-17 17:09 ` Achim Gratz
@ 2021-05-17 23:09 ` Brian Inglis
0 siblings, 0 replies; 18+ messages in thread
From: Brian Inglis @ 2021-05-17 23:09 UTC (permalink / raw)
To: cygwin-apps
On 2021-05-17 11:09, Achim Gratz wrote:
> Marco Atzeri via Cygwin-apps writes:
>>> https://cygwin.com/git/?p=cygwin-htdocs.git;a=commitdiff;h=151c47f1889486a010954dad556a4f32add67015
>>> ... is that what you intended to do?
Thanks Jon, good catch!
>> oh F**K, not at all
> Well, we finally have a maintainer for all that stuff. ;-)
I appreciate your vote of confidence or mad desperation, but on my system,
I doubt I could even rebuild those packages in what remains of the year!
Repology already picked those up:
https://repology.org/maintainer/brian.inglis%40cygwin/feed-for-repo/cygwin
so somebody needs to put those back down! ;^>
--
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
This email may be disturbing to some readers as it contains
too much technical detail. Reader discretion is advised.
[Data in binary units and prefixes, physical quantities in SI.]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [ITA] libssh2
2021-05-17 16:45 ` Marco Atzeri
2021-05-17 17:09 ` Achim Gratz
@ 2021-05-17 17:11 ` Jon Turney
2021-05-18 4:42 ` Marco Atzeri
1 sibling, 1 reply; 18+ messages in thread
From: Jon Turney @ 2021-05-17 17:11 UTC (permalink / raw)
To: cygwin-apps
On 17/05/2021 17:45, Marco Atzeri via Cygwin-apps wrote:
> On 17.05.2021 17:29, Jon Turney wrote:
>>
>> Hmmm...
>>
>> https://cygwin.com/git/?p=cygwin-htdocs.git;a=commitdiff;h=151c47f1889486a010954dad556a4f32add67015
>>
>>
>> ... is that what you intended to do?
>
> oh F**K, not at all
>
> I forgot to filter when using sed.
> I did right the first time...
>
> Can you revert it or should I ?
Please go ahead.
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2021-05-18 4:42 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-15 20:12 [ITA] libssh2 Brian Inglis
2021-05-15 20:36 ` Achim Gratz
2021-05-16 4:53 ` Brian Inglis
2021-05-16 4:32 ` Marco Atzeri
2021-05-16 4:54 ` Brian Inglis
2021-05-16 8:31 ` calm needs to get restarted Achim Gratz
2021-05-16 9:36 ` Marco Atzeri
2021-05-16 10:45 ` Achim Gratz
2021-05-16 11:22 ` Marco Atzeri
2021-05-17 15:28 ` Jon Turney
2021-05-17 5:49 ` [ITA] libssh2 Brian Inglis
2021-05-17 6:31 ` Marco Atzeri
2021-05-17 15:29 ` Jon Turney
2021-05-17 16:45 ` Marco Atzeri
2021-05-17 17:09 ` Achim Gratz
2021-05-17 23:09 ` Brian Inglis
2021-05-17 17:11 ` Jon Turney
2021-05-18 4:42 ` Marco Atzeri
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).