* [PATCH 0/6] More Makefile/configure cleanups
@ 2020-10-20 13:42 Jon Turney
2020-10-20 13:42 ` [PATCH 1/6] Remove lsaauth Jon Turney
` (5 more replies)
0 siblings, 6 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-20 13:42 UTC (permalink / raw)
To: cygwin-patches; +Cc: Jon Turney
For ease of reviewing, this patch series doesn't contain changes to
generated files which would be made by an autoreconf.
Jon Turney (6):
Remove lsaauth
Drop cygwin version.o from cygserver
gendef generates sigfe.s and cygwin.def
Remove nostdlib Makefile variable
Drop do-nothing install_host target
Drop do-nothing install_target target
winsup/Makefile.common | 2 -
winsup/Makefile.in | 2 -
winsup/cygserver/Makefile.in | 4 +-
winsup/cygserver/configure.ac | 3 -
winsup/cygwin/Makefile.in | 19 +-
winsup/cygwin/configure.ac | 3 -
winsup/lsaauth/Makefile.in | 94 -
winsup/lsaauth/configure | 4130 ---------------------------------
winsup/lsaauth/configure.ac | 38 -
winsup/lsaauth/cyglsa-config | 121 -
winsup/lsaauth/cyglsa.c | 598 -----
winsup/lsaauth/cyglsa.din | 9 -
winsup/lsaauth/cyglsa64.def | 9 -
winsup/testsuite/Makefile.in | 4 +-
14 files changed, 7 insertions(+), 5029 deletions(-)
delete mode 100644 winsup/lsaauth/Makefile.in
delete mode 100755 winsup/lsaauth/configure
delete mode 100644 winsup/lsaauth/configure.ac
delete mode 100755 winsup/lsaauth/cyglsa-config
delete mode 100644 winsup/lsaauth/cyglsa.c
delete mode 100644 winsup/lsaauth/cyglsa.din
delete mode 100644 winsup/lsaauth/cyglsa64.def
--
2.28.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/6] Remove lsaauth
2020-10-20 13:42 [PATCH 0/6] More Makefile/configure cleanups Jon Turney
@ 2020-10-20 13:42 ` Jon Turney
2020-10-20 13:43 ` [PATCH 2/6] Drop cygwin version.o from cygserver Jon Turney
` (4 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-20 13:42 UTC (permalink / raw)
To: cygwin-patches; +Cc: Jon Turney
Remove lsaauth, not built since 2741dd05.
---
winsup/Makefile.in | 2 -
winsup/lsaauth/Makefile.in | 94 -
winsup/lsaauth/configure | 4130 ----------------------------------
winsup/lsaauth/configure.ac | 38 -
winsup/lsaauth/cyglsa-config | 121 -
winsup/lsaauth/cyglsa.c | 598 -----
winsup/lsaauth/cyglsa.din | 9 -
winsup/lsaauth/cyglsa64.def | 9 -
8 files changed, 5001 deletions(-)
delete mode 100644 winsup/lsaauth/Makefile.in
delete mode 100755 winsup/lsaauth/configure
delete mode 100644 winsup/lsaauth/configure.ac
delete mode 100755 winsup/lsaauth/cyglsa-config
delete mode 100644 winsup/lsaauth/cyglsa.c
delete mode 100644 winsup/lsaauth/cyglsa.din
delete mode 100644 winsup/lsaauth/cyglsa64.def
diff --git a/winsup/Makefile.in b/winsup/Makefile.in
index dc1c04444..f1c1ce771 100644
--- a/winsup/Makefile.in
+++ b/winsup/Makefile.in
@@ -122,5 +122,3 @@ install_utils: cygwin
install_cygwin:
install_cygserver: cygwin
-
-lsaauth:
diff --git a/winsup/lsaauth/Makefile.in b/winsup/lsaauth/Makefile.in
deleted file mode 100644
index 997eaf9b4..000000000
--- a/winsup/lsaauth/Makefile.in
+++ /dev/null
@@ -1,94 +0,0 @@
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# A copy of the GNU General Public License can be found at
-# http://www.gnu.org/
-#
-# Written by Corinna Vinschen <vinschen@redhat.de>
-#
-# Makefile for Cygwin subauthentication DLL.
-
-SHELL := @SHELL@
-
-srcdir := @srcdir@
-VPATH := @srcdir@
-prefix := @prefix@
-exec_prefix := @exec_prefix@
-
-bindir := @bindir@
-etcdir := $(exec_prefix)/etc
-
-INSTALL := @INSTALL@
-INSTALL_PROGRAM := @INSTALL_PROGRAM@
-INSTALL_DATA := @INSTALL_DATA@
-
-CC := @CC@
-CC_FOR_TARGET := $(CC)
-
-MINGW32_CC := @MINGW32_CC@
-MINGW64_CC := @MINGW64_CC@
-
-CFLAGS := @CFLAGS@
-
-include $(srcdir)/../Makefile.common
-
-target_cpu:=@target_cpu@
-
-WIN32_INCLUDES := -I. -I$(srcdir)
-WIN32_CFLAGS := $(CFLAGS) $(WIN32_INCLUDES)
-WIN32_LDFLAGS := $(CFLAGS) -nostdlib -Wl,-shared
-
-# Never again try to remove advapi32. It does not matter if the DLL calls
-# advapi32 functions or the equivalent ntdll functions.
-# But if the LSA authentication DLL is not linked against advapi32, it's
-# not recognized by LSA.
-LIBS := -ladvapi32 -lkernel32 -lntdll
-
-ifneq ($(target_cpu),x86_64)
-DLL32 := cyglsa.dll
-DEF32 := cyglsa.def
-OBJ32 := cyglsa.o
-endif
-
-DLL64 := cyglsa64.dll
-DEF64 := cyglsa64.def
-OBJ64 := cyglsa64.o
-
-.SUFFIXES:
-.NOEXPORT:
-
-all: Makefile $(DLL32) $(DLL64)
-
-$(DEF32): cyglsa.din config.status
- $(SHELL) config.status
-
-$(DLL32): $(OBJ32) $(DEF32)
- $(MINGW32_CC) -s $(WIN32_LDFLAGS) -e _DllMain@12 -o $@ $^ $(LIBS)
-
-$(OBJ32): cyglsa.c
- $(MINGW32_CC) $(WIN32_CFLAGS) -c -o $@ $<
-
-$(DLL64): $(OBJ64) $(DEF64)
- $(MINGW64_CC) -s $(WIN32_LDFLAGS) -e DllMain -o $@ $^ $(LIBS)
-
-$(OBJ64): cyglsa.c
- $(MINGW64_CC) $(WIN32_CFLAGS) -c -o $@ $<
-
-.PHONY: all install clean realclean
-
-realclean: clean
- rm -f Makefile config.cache
-
-clean:
- rm -f *.o *.dll cyglsa.def
-
-install: all
- /bin/mkdir -p $(DESTDIR)$(bindir)
-ifneq ($(target_cpu),x86_64)
- $(INSTALL_PROGRAM) $(DLL32) $(DESTDIR)$(bindir)/$(DLL32)
-endif
- $(INSTALL_PROGRAM) $(DLL64) $(DESTDIR)$(bindir)/$(DLL64)
- $(INSTALL_PROGRAM) $(srcdir)/cyglsa-config $(DESTDIR)$(bindir)/cyglsa-config
diff --git a/winsup/lsaauth/configure b/winsup/lsaauth/configure
deleted file mode 100755
index 173d3a887..000000000
--- a/winsup/lsaauth/configure
+++ /dev/null
@@ -1,4130 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for Cygwin Lsaauth 0.
-#
-# Report bugs to <cygwin@cygwin.com>.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
- # into an infinite loop, continuously re-executing ourselves.
- if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
- _as_can_reexec=no; export _as_can_reexec;
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
- fi
- # We don't want this to propagate to other subprocesses.
- { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- export CONFIG_SHELL
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org and cygwin@cygwin.com
-$0: about your system, including any error possibly output
-$0: before this message. Then install a modern shell, or
-$0: manually run the script under such a shell if you do
-$0: have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
- # already done that, so ensure we don't try to do so again and fall
- # in an infinite loop. This has already happened in practice.
- _as_can_reexec=no; export _as_can_reexec
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='Cygwin Lsaauth'
-PACKAGE_TARNAME='cygwin'
-PACKAGE_VERSION='0'
-PACKAGE_STRING='Cygwin Lsaauth 0'
-PACKAGE_BUGREPORT='cygwin@cygwin.com'
-PACKAGE_URL='https://cygwin.com'
-
-ac_unique_file="Makefile.in"
-ac_no_link=no
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-MINGW64_CC
-MINGW32_CC
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-target_os
-target_vendor
-target_cpu
-target
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures Cygwin Lsaauth 0 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/cygwin]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
- --target=TARGET configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of Cygwin Lsaauth 0:";;
- esac
- cat <<\_ACEOF
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <cygwin@cygwin.com>.
-Cygwin Lsaauth home page: <https://cygwin.com>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-Cygwin Lsaauth configure 0
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by Cygwin Lsaauth $as_me 0, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-ac_aux_dir=
-for ac_dir in ../.. "$srcdir"/../..; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../.. \"$srcdir\"/../.." "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$target_alias" = x; then
- ac_cv_target=$ac_cv_host
-else
- ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- ac_no_link=no
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-if test -z "$ac_file"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
- { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if { ac_try='./conftest$ac_cv_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-
-else
- rm -f -r a.out a.exe b.out conftest.$ac_ext conftest.o conftest.obj conftest.dSYM
- ac_no_link=yes
- # Setting cross_compile will disable run tests; it will
- # also disable AC_CHECK_FILE but that's generally
- # correct if we can't link.
- cross_compiling=yes
- EXEEXT=
- # Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
- { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if { ac_try='./conftest$ac_cv_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-case "$target_cpu" in
-i?86)
- for ac_prog in i686-w64-mingw32-gcc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_MINGW32_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MINGW32_CC"; then
- ac_cv_prog_MINGW32_CC="$MINGW32_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_MINGW32_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MINGW32_CC=$ac_cv_prog_MINGW32_CC
-if test -n "$MINGW32_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MINGW32_CC" >&5
-$as_echo "$MINGW32_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MINGW32_CC" && break
-done
-
- test -z "$MINGW32_CC" && as_fn_error $? "no acceptable mingw32 cc found in \$PATH" "$LINENO" 5
- ;;
-esac
-
-for ac_prog in x86_64-w64-mingw32-gcc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_MINGW64_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MINGW64_CC"; then
- ac_cv_prog_MINGW64_CC="$MINGW64_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_MINGW64_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MINGW64_CC=$ac_cv_prog_MINGW64_CC
-if test -n "$MINGW64_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MINGW64_CC" >&5
-$as_echo "$MINGW64_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MINGW64_CC" && break
-done
-
-test -z "$MINGW64_CC" && as_fn_error $? "no acceptable mingw64 cc found in \$PATH" "$LINENO" 5
-
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- fi
- done
- done
- ;;
-esac
-
- done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-ac_config_files="$ac_config_files Makefile cyglsa.def:cyglsa.din"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- if test "x$cache_file" != "x/dev/null"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
- else
- case $cache_file in #(
- */* | ?:*)
- mv -f confcache "$cache_file"$$ &&
- mv -f "$cache_file"$$ "$cache_file" ;; #(
- *)
- mv -f confcache "$cache_file" ;;
- esac
- fi
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
- g
- s/^\n//
- s/\n/ /g
- p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by Cygwin Lsaauth $as_me 0, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <cygwin@cygwin.com>.
-Cygwin Lsaauth home page: <https://cygwin.com>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-Cygwin Lsaauth config.status 0
-configured by $0, generated by GNU Autoconf 2.69,
- with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h | --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "cyglsa.def") CONFIG_FILES="$CONFIG_FILES cyglsa.def:cyglsa.din" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = "\a"
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X " :F $CONFIG_FILES "
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-
- esac
-
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/winsup/lsaauth/configure.ac b/winsup/lsaauth/configure.ac
deleted file mode 100644
index f2b2c6329..000000000
--- a/winsup/lsaauth/configure.ac
+++ /dev/null
@@ -1,38 +0,0 @@
-dnl Autoconf configure script for Cygwin utilities.
-dnl
-dnl This file is part of Cygwin.
-dnl
-dnl This software is a copyrighted work licensed under the terms of the
-dnl Cygwin license. Please consult the file "CYGWIN_LICENSE" for
-dnl details.
-dnl
-dnl Written by Christopher Faylor <cgf@redhat.com>
-dnl Changed for lsa subdir by Corinna Vinschen <corinna@vinschen.de>
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.59])
-AC_INIT([Cygwin Lsaauth],[0],[cygwin@cygwin.com],[cygwin],[https://cygwin.com])
-AC_CONFIG_SRCDIR(Makefile.in)
-
-AC_CONFIG_AUX_DIR(../..)
-
-AC_NO_EXECUTABLES
-AC_CANONICAL_TARGET
-
-AC_PROG_CC
-
-case "$target_cpu" in
-i?86)
- AC_CHECK_PROGS(MINGW32_CC, i686-w64-mingw32-gcc)
- test -z "$MINGW32_CC" && AC_MSG_ERROR([no acceptable mingw32 cc found in \$PATH])
- ;;
-esac
-
-AC_CHECK_PROGS(MINGW64_CC, x86_64-w64-mingw32-gcc)
-test -z "$MINGW64_CC" && AC_MSG_ERROR([no acceptable mingw64 cc found in \$PATH])
-
-AC_PROG_INSTALL
-
-AC_CONFIG_FILES([Makefile cyglsa.def:cyglsa.din])
-AC_OUTPUT
diff --git a/winsup/lsaauth/cyglsa-config b/winsup/lsaauth/cyglsa-config
deleted file mode 100755
index 0e911c278..000000000
--- a/winsup/lsaauth/cyglsa-config
+++ /dev/null
@@ -1,121 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# A copy of the GNU General Public License can be found at
-# http://www.gnu.org/
-#
-# This file is part of the Cygwin LSA authentication package.
-
-request()
-{
- if [ "${auto_answer}" = "yes" ]
- then
- echo "$1 (yes/no) yes"
- return 0
- elif [ "${auto_answer}" = "no" ]
- then
- echo "$1 (yes/no) no"
- return 1
- fi
-
- answer=""
- while [ "X${answer}" != "Xyes" -a "X${answer}" != "Xno" ]
- do
- echo -n "$1 (yes/no) "
- read -e answer
- done
- if [ "X${answer}" = "Xyes" ]
- then
- return 0
- else
- return 1
- fi
-}
-
-# Check if running under at least Windows 2000
-_nt_too_old=`uname | awk -F- '{print ( $2 < 5.0 ) ? 1 : 0;}'`
-if [ ${_nt_too_old} -eq 1 ]
-then
- echo "Cygwin LSA authentication not supported on Windows NT4 or older. Exiting."
- exit 1
-fi
-
-# Directory in which cyglsa DLL is installed as DOS path.
-bindir=`cygpath -w /`\\bin
-
-# Check if we're running on 64 bit Windows. If so, we need the 64 bit
-# cyglsa DLL.
-dll=cyglsa.dll
-test -d `cygpath -p ${SYSTEMROOT}`/SysWOW64 && dll=cyglsa64.dll
-
-# Check if the DLL is actually installed. If not, bail out.
-if [ ! -f /bin/${dll} ]
-then
- echo "Required Cygwin authentication DLL /bin/${dll} doesn't exist. Exiting."
- exit 1
-fi
-
-echo
-echo "Warning: Registering the Cygwin LSA authentication package requires"
-echo "administrator privileges! You also have to reboot the machine to"
-echo "activate the change."
-echo
-request "Are you sure you want to continue?" || exit 0
-
-# The registry value which keeps the authentication packages.
-value='/HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa/Authentication Packages'
-
-[ -f /bin/cyglsa -a ! -d /bin/cyglsa ] && rm -rf /bin/cyglsa
-if [ ! -d /bin/cyglsa ]
-then
- if ! mkdir -m 755 /bin/cyglsa
- then
- echo "Creating the /bin/cyglsa directory failed. Exiting."
- exit 1
- fi
-fi
-if ! cp -b "/bin/${dll}" "/bin/cyglsa/${dll}"
-then
- echo "Copying the new LSA authentication package /bin/${dll} to"
- echo "/bin/cyglsa/${dll} failed. Exiting."
- exit 1
-fi
-
-# Get old content, remove every trace of "cyglsa" from it and write the
-# content back to the registry with the new, correct path to the cyglsa DLL.
-old=`regtool get "${value}"`
-new=`for i in ${old}
-do
- echo $i | GREP_OPTIONS="" grep -v cyglsa
-done`
-if ! regtool set "${value}" ${new} "${bindir}\\cyglsa\\${dll}"
-then
- echo "Setting the new registry value failed. Exiting."
- exit 1
-fi
-
-echo
-echo "Cygwin LSA authentication package registered."
-echo
-echo "Activating Cygwin's LSA authentication package requires to reboot."
-if [ -x /bin/shutdown ]
-then
- if request "Do you want to do this immediately?"
- then
- echo
- echo "Other users might still be working on this machine."
- echo
- if request "Are you sure?"
- then
- echo
- echo "Ok, will reboot in 30 seconds."
- echo
- echo "If you change your mind, call 'shutdown -a' within 30 seconds"
- shutdown -r 30
- fi
- fi
-fi
diff --git a/winsup/lsaauth/cyglsa.c b/winsup/lsaauth/cyglsa.c
deleted file mode 100644
index 9d9c9ff03..000000000
--- a/winsup/lsaauth/cyglsa.c
+++ /dev/null
@@ -1,598 +0,0 @@
-/* cyglsa.c: LSA authentication module for Cygwin
-
- Written by Corinna Vinschen <corinna@vinschen.de>
-
-This file is part of Cygwin.
-
-This software is a copyrighted work licensed under the terms of the
-Cygwin license. Please consult the file "CYGWIN_LICENSE" for details. */
-
-#define WINVER 0x0600
-#include <ntstatus.h>
-#include <windows.h>
-#include <wininet.h>
-#include <lmcons.h>
-#include <iptypes.h>
-#include <ntsecapi.h>
-#include "../cygwin/cyglsa.h"
-#include "../cygwin/include/cygwin/version.h"
-
-static PLSA_SECPKG_FUNCS funcs;
-
-BOOL APIENTRY
-DllMain (HINSTANCE inst, DWORD reason, LPVOID res)
-{
- switch (reason)
- {
- case DLL_PROCESS_ATTACH:
- case DLL_THREAD_ATTACH:
- case DLL_THREAD_DETACH:
- case DLL_PROCESS_DETACH:
- break;
- }
- return TRUE;
-}
-
-/* Declare NTDLL functions here to avoid problems with different
- header file layout in different compiler environments. */
-#ifndef NT_SUCCESS
-#define NT_SUCCESS(s) ((s) >= 0)
-#endif
-/* These standard POSIX functions are implemented in NTDLL and exported.
- There's just no header to define them and using wchar.h from mingw
- or Cygwin seems wrong somehow. */
-wchar_t *__cdecl wcscpy (wchar_t *, const wchar_t *);
-size_t __cdecl wcslen (const wchar_t *);
-
-#ifndef RtlInitEmptyUnicodeString
-__inline VOID NTAPI
-RtlInitEmptyUnicodeString(PUNICODE_STRING dest, PCWSTR buf, USHORT len)
-{
- dest->Length = 0;
- dest->MaximumLength = len;
- dest->Buffer = (PWSTR) buf;
-}
-#endif
-
-static PUNICODE_STRING
-uni_alloc (PWCHAR src, USHORT len)
-{
- PUNICODE_STRING tgt;
-
- if (!(tgt = funcs->AllocateLsaHeap (sizeof (UNICODE_STRING))))
- return NULL;
- tgt->Length = len * sizeof (WCHAR);
- tgt->MaximumLength = tgt->Length + sizeof (WCHAR);
- if (!(tgt->Buffer = funcs->AllocateLsaHeap (tgt->MaximumLength)))
- {
- funcs->FreeLsaHeap (tgt);
- return NULL;
- }
- wcscpy (tgt->Buffer, src);
- return tgt;
-}
-
-/* No, I don't want to include stdio.h so I take what ntdll offers. */
-extern int _vsnprintf (char *, size_t, const char *, va_list);
-
-static HANDLE fh = INVALID_HANDLE_VALUE;
-
-static int
-cyglsa_printf (const char *format, ...)
-{
- char buf[256];
- DWORD wr;
- int ret;
- va_list ap;
-
- if (fh == INVALID_HANDLE_VALUE)
- return 0;
-
- va_start (ap, format);
- ret = _vsnprintf (buf, 256, format, ap);
- va_end (ap);
- if (ret <= 0)
- return ret;
- if (ret > 256)
- ret = 255;
- buf[255] = '\0';
- WriteFile (fh, buf, ret, &wr, NULL);
- return wr;
-}
-
-static void
-print_sid (const char *prefix, int idx, PISID sid)
-{
- DWORD i;
-
- cyglsa_printf ("%s", prefix);
- if (idx >= 0)
- cyglsa_printf ("[%d] ", idx);
- cyglsa_printf ("(0x%08x) ", (INT_PTR) sid);
- if (!sid)
- cyglsa_printf ("NULL\n");
- else if (IsBadReadPtr (sid, 8))
- cyglsa_printf ("INVALID POINTER\n");
- else if (!IsValidSid ((PSID) sid))
- cyglsa_printf ("INVALID SID\n");
- else if (IsBadReadPtr (sid, 8 + sizeof (DWORD) * sid->SubAuthorityCount))
- cyglsa_printf ("INVALID POINTER SPACE\n");
- else
- {
- cyglsa_printf ("S-%d-%d", sid->Revision, sid->IdentifierAuthority.Value[5]);
- for (i = 0; i < sid->SubAuthorityCount; ++i)
- cyglsa_printf ("-%lu", sid->SubAuthority[i]);
- cyglsa_printf ("\n");
- }
-}
-
-static void
-print_groups (PTOKEN_GROUPS grps)
-{
- DWORD i;
-
- cyglsa_printf ("Groups: (0x%08x) ", (INT_PTR) grps);
- if (!grps)
- cyglsa_printf ("NULL\n");
- else if (IsBadReadPtr (grps, sizeof (DWORD)))
- cyglsa_printf ("INVALID POINTER\n");
- else if (IsBadReadPtr (grps, sizeof (DWORD) + sizeof (SID_AND_ATTRIBUTES)
- * grps->GroupCount))
- cyglsa_printf ("INVALID POINTER SPACE\n");
- else
- {
- cyglsa_printf ("Count: %lu\n", grps->GroupCount);
- for (i = 0; i < grps->GroupCount; ++i)
- {
- cyglsa_printf ("(attr: 0x%lx)", grps->Groups[i].Attributes);
- print_sid (" ", i, (PISID) grps->Groups[i].Sid);
- }
- }
-}
-
-static void
-print_privs (PTOKEN_PRIVILEGES privs)
-{
- DWORD i;
-
- cyglsa_printf ("Privileges: (0x%08x) ", (INT_PTR) privs);
- if (!privs)
- cyglsa_printf ("NULL\n");
- else if (IsBadReadPtr (privs, sizeof (DWORD)))
- cyglsa_printf ("INVALID POINTER\n");
- else if (IsBadReadPtr (privs, sizeof (DWORD) + sizeof (LUID_AND_ATTRIBUTES)
- * privs->PrivilegeCount))
- cyglsa_printf ("INVALID POINTER SPACE\n");
- else
- {
- cyglsa_printf ("Count: %lu\n", privs->PrivilegeCount);
- for (i = 0; i < privs->PrivilegeCount; ++i)
- cyglsa_printf ("Luid: {%ld, %lu} Attributes: 0x%lx\n",
- privs->Privileges[i].Luid.HighPart,
- privs->Privileges[i].Luid.LowPart,
- privs->Privileges[i].Attributes);
- }
-}
-
-static void
-print_dacl (PACL dacl)
-{
- DWORD i;
-
- cyglsa_printf ("DefaultDacl: (0x%08x) ", (INT_PTR) dacl);
- if (!dacl)
- cyglsa_printf ("NULL\n");
- else if (IsBadReadPtr (dacl, sizeof (ACL)))
- cyglsa_printf ("INVALID POINTER\n");
- else if (IsBadReadPtr (dacl, dacl->AclSize))
- cyglsa_printf ("INVALID POINTER SPACE\n");
- else
- {
- cyglsa_printf ("Rev: %d, Count: %d\n", dacl->AclRevision, dacl->AceCount);
- for (i = 0; i < dacl->AceCount; ++i)
- {
- PVOID vace;
- PACCESS_ALLOWED_ACE ace;
-
- if (!GetAce (dacl, i, &vace))
- cyglsa_printf ("[%lu] GetAce error %lu\n", i, GetLastError ());
- else
- {
- ace = (PACCESS_ALLOWED_ACE) vace;
- cyglsa_printf ("Type: %x, Flags: %x, Access: %lx,",
- ace->Header.AceType, ace->Header.AceFlags, (DWORD) ace->Mask);
- print_sid (" ", i, (PISID) &ace->SidStart);
- }
- }
- }
-}
-
-static void
-print_tokinf (PLSA_TOKEN_INFORMATION_V2 ptok, size_t size,
- PVOID got_start, PVOID gotinf_start, PVOID gotinf_end)
-{
- if (fh == INVALID_HANDLE_VALUE)
- return;
-
- cyglsa_printf ("INCOMING: start: 0x%08x infstart: 0x%08x infend: 0x%08x\n",
- (INT_PTR) got_start, (INT_PTR) gotinf_start,
- (INT_PTR) gotinf_end);
-
- cyglsa_printf ("LSA_TOKEN_INFORMATION_V2: 0x%08x - 0x%08x\n",
- (INT_PTR) ptok, (INT_PTR) ptok + size);
-
- /* User SID */
- cyglsa_printf ("User: (attr: 0x%lx)", ptok->User.User.Attributes);
- print_sid (" ", -1, (PISID) ptok->User.User.Sid);
-
- /* Groups */
- print_groups (ptok->Groups);
-
- /* Primary Group SID */
- print_sid ("Primary Group: ", -1, (PISID)ptok->PrimaryGroup.PrimaryGroup);
-
- /* Privileges */
- print_privs (ptok->Privileges);
-
- /* Owner */
- print_sid ("Owner: ", -1, (PISID) ptok->Owner.Owner);
-
- /* Default DACL */
- print_dacl (ptok->DefaultDacl.DefaultDacl);
-
- // CloseHandle (fh);
-}
-
-NTSTATUS NTAPI
-LsaApInitializePackage (ULONG authp_id, PLSA_SECPKG_FUNCS dpt,
- PLSA_STRING dummy1, PLSA_STRING dummy2,
- PLSA_STRING *authp_name)
-{
- PLSA_STRING name = NULL;
-
- /* Set global pointer to lsa helper function table. */
- funcs = dpt;
-
- /* Allocate and set the name of the authentication package. This is the
- name which has to be used in LsaLookupAuthenticationPackage. */
- if (!(name = funcs->AllocateLsaHeap (sizeof *name)))
- return STATUS_NO_MEMORY;
- if (!(name->Buffer = funcs->AllocateLsaHeap (sizeof (CYG_LSA_PKGNAME))))
- {
- funcs->FreeLsaHeap (name);
- return STATUS_NO_MEMORY;
- }
- name->Length = sizeof (CYG_LSA_PKGNAME) - 1;
- name->MaximumLength = sizeof (CYG_LSA_PKGNAME);
- strcpy (name->Buffer, CYG_LSA_PKGNAME);
- (*authp_name) = name;
-
-#ifdef DEBUGGING
- fh = CreateFile ("C:\\cyglsa.dbgout", GENERIC_WRITE,
- FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE,
- NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL);
- cyglsa_printf ("Initialized\n");
-#endif /* DEBUGGING */
-
- return STATUS_SUCCESS;
-}
-
-NTSTATUS NTAPI
-LsaApLogonUserEx (PLSA_CLIENT_REQUEST request, SECURITY_LOGON_TYPE logon_type,
- PVOID auth, PVOID client_auth_base, ULONG auth_len,
- PVOID *pbuf, PULONG pbuf_len, PLUID logon_id,
- PNTSTATUS sub_stat, PLSA_TOKEN_INFORMATION_TYPE tok_type,
- PVOID *tok, PUNICODE_STRING *account,
- PUNICODE_STRING *authority, PUNICODE_STRING *machine)
-{
- DWORD checksum, i;
- PDWORD csp, csp_end;
- NTSTATUS stat;
- SECPKG_CLIENT_INFO clinf;
- PLSA_TOKEN_INFORMATION_V2 tokinf;
-
- cyglsa_t *authinf = (cyglsa_t *) auth;
-
- /* Check if the caller has the SeTcbPrivilege, otherwise refuse service. */
- stat = funcs->GetClientInfo (&clinf);
- if (stat != STATUS_SUCCESS)
- {
- cyglsa_printf ("GetClientInfo failed: 0x%08lx\n", stat);
- return stat;
- }
- if (!clinf.HasTcbPrivilege)
- {
- cyglsa_printf ("Client has no TCB privilege. Access denied.\n");
- return STATUS_ACCESS_DENIED;
- }
-
- /* Make a couple of validity checks. */
- if (auth_len < sizeof *authinf
- || authinf->magic != CYG_LSA_MAGIC
- || !authinf->username[0]
- || !authinf->domain[0])
- {
- cyglsa_printf ("Invalid authentication parameter.\n");
- return STATUS_INVALID_PARAMETER;
- }
- checksum = CYG_LSA_MAGIC;
- csp = (PDWORD) &authinf->username;
- csp_end = (PDWORD) ((PBYTE) authinf + auth_len);
- while (csp < csp_end)
- checksum += *csp++;
- if (authinf->checksum != checksum)
- {
- cyglsa_printf ("Invalid checksum.\n");
- return STATUS_INVALID_PARAMETER_3;
- }
-
- /* Set account to username and authority to domain resp. machine name.
- The name of the logon account name as returned by LookupAccountSid
- is created from here as "authority\account". */
- authinf->username[UNLEN] = '\0';
- authinf->domain[MAX_DOMAIN_NAME_LEN] = '\0';
- if (account && !(*account = uni_alloc (authinf->username,
- wcslen (authinf->username))))
- {
- cyglsa_printf ("No memory trying to create account.\n");
- return STATUS_NO_MEMORY;
- }
- if (authority && !(*authority = uni_alloc (authinf->domain,
- wcslen (authinf->domain))))
- {
- cyglsa_printf ("No memory trying to create authority.\n");
- return STATUS_NO_MEMORY;
- }
- if (machine)
- {
- WCHAR mach[MAX_COMPUTERNAME_LENGTH + 1];
- DWORD msize = MAX_COMPUTERNAME_LENGTH + 1;
- if (!GetComputerNameW (mach, &msize))
- wcscpy (mach, L"UNKNOWN");
- if (!(*machine = uni_alloc (mach, wcslen (mach))))
- {
- cyglsa_printf ("No memory trying to create machine.\n");
- return STATUS_NO_MEMORY;
- }
- }
- /* Create a fake buffer in pbuf which is free'd again in the client.
- Windows 2000 tends to crash when setting this pointer to NULL. */
- if (pbuf)
- {
-#ifdef JUST_ANOTHER_NONWORKING_SOLUTION
- cygprf_t prf;
- WCHAR sam_username[MAX_DOMAIN_NAME_LEN + UNLEN + 2];
- SECURITY_STRING sam_user, prefix;
- PUCHAR user_auth;
- ULONG user_auth_size;
- WCHAR flatname[UNLEN + 1];
- UNICODE_STRING flatnm;
- TOKEN_SOURCE ts;
- HANDLE token;
-#endif /* JUST_ANOTHER_NONWORKING_SOLUTION */
-
- stat = funcs->AllocateClientBuffer (request, 64UL, pbuf);
- if (!LSA_SUCCESS (stat))
- {
- cyglsa_printf ("AllocateClientBuffer failed: 0x%08lx\n", stat);
- return stat;
- }
-#ifdef JUST_ANOTHER_NONWORKING_SOLUTION
- prf.magic_pre = MAGIC_PRE;
- prf.token = NULL;
- prf.magic_post = MAGIC_POST;
-
-#if 0
- /* That's how it was supposed to work according to MSDN... */
- wcscpy (sam_username, authinf->domain);
- wcscat (sam_username, L"\\");
- wcscat (sam_username, authinf->username);
-#else
- /* That's the only solution which worked, and then it only worked
- for machine local accounts. No domain authentication possible.
- STATUS_NO_SUCH_USER galore! */
- wcscpy (sam_username, authinf->username);
-#endif
- RtlInitUnicodeString (&sam_user, sam_username);
- RtlInitUnicodeString (&prefix, L"");
- RtlInitEmptyUnicodeString (&flatnm, flatname,
- (UNLEN + 1) * sizeof (WCHAR));
-
- stat = funcs->GetAuthDataForUser (&sam_user, SecNameSamCompatible,
- NULL, &user_auth,
- &user_auth_size, &flatnm);
- if (!NT_SUCCESS (stat))
- {
- char sam_u[MAX_DOMAIN_NAME_LEN + UNLEN + 2];
- wcstombs (sam_u, sam_user.Buffer, sizeof (sam_u));
- cyglsa_printf ("GetAuthDataForUser (%u,%u,%s) failed: 0x%08lx\n",
- sam_user.Length, sam_user.MaximumLength, sam_u, stat);
- return stat;
- }
-
- memcpy (ts.SourceName, "Cygwin.1", 8);
- ts.SourceIdentifier.HighPart = 0;
- ts.SourceIdentifier.LowPart = 0x0104;
- RtlInitEmptyUnicodeString (&flatnm, flatname,
- (UNLEN + 1) * sizeof (WCHAR));
- stat = funcs->ConvertAuthDataToToken (user_auth, user_auth_size,
- SecurityDelegation, &ts,
- Interactive, *authority,
- &token, logon_id, &flatnm,
- sub_stat);
- if (!NT_SUCCESS (stat))
- {
- cyglsa_printf ("ConvertAuthDataToToken failed: 0x%08lx\n", stat);
- return stat;
- }
-
- stat = funcs->DuplicateHandle (token, &prf.token);
- if (!NT_SUCCESS (stat))
- {
- cyglsa_printf ("DuplicateHandle failed: 0x%08lx\n", stat);
- return stat;
- }
-
- stat = funcs->CopyToClientBuffer (request, sizeof prf, *pbuf, &prf);
- if (!NT_SUCCESS (stat))
- {
- cyglsa_printf ("CopyToClientBuffer failed: 0x%08lx\n", stat);
- return stat;
- }
- funcs->FreeLsaHeap (user_auth);
-#endif /* JUST_ANOTHER_NONWORKING_SOLUTION */
- }
- if (pbuf_len)
- *pbuf_len = 64UL;
-
- /* A PLSA_TOKEN_INFORMATION_V2 is allocated in one piece, so... */
-#if defined (__x86_64__) || defined (_M_AMD64)
- {
- /* ...on 64 bit systems we have to convert the incoming 32 bit offsets
- into 64 bit pointers. That requires to re-evaluate the size of the
- outgoing tokinf structure and a somewhat awkward procedure to copy
- the information over. */
- LONG_PTR base;
- PBYTE tptr;
- DWORD size, newsize;
- PSID src_sid;
- PCYG_TOKEN_GROUPS src_grps;
- PTOKEN_GROUPS grps;
- PTOKEN_PRIVILEGES src_privs;
- PACL src_acl;
-
- base = (LONG_PTR) &authinf->inf;
-
- newsize = authinf->inf_size;
- newsize += sizeof (TOKEN_USER) - sizeof (CYG_TOKEN_USER); /* User SID */
- newsize += sizeof (PTOKEN_GROUPS) - sizeof (OFFSET); /* Groups */
- src_grps = (PCYG_TOKEN_GROUPS) (base + authinf->inf.Groups);
- newsize += src_grps->GroupCount /* Group SIDs */
- * (sizeof (SID_AND_ATTRIBUTES)
- - sizeof (CYG_SID_AND_ATTRIBUTES));
- newsize += sizeof (PSID) - sizeof (OFFSET); /* Primary Group SID */
- newsize += sizeof (PTOKEN_PRIVILEGES) - sizeof (OFFSET); /* Privileges */
- newsize += 0; /* Owner SID */
- newsize += sizeof (PACL) - sizeof (OFFSET); /* Default DACL */
-
- if (!(tokinf = funcs->AllocateLsaHeap (newsize)))
- return STATUS_NO_MEMORY;
- tptr = (PBYTE)(tokinf + 1);
-
- tokinf->ExpirationTime = authinf->inf.ExpirationTime;
- /* User SID */
- src_sid = (PSID) (base + authinf->inf.User.User.Sid);
- size = GetLengthSid (src_sid);
- CopySid (size, (PSID) tptr, src_sid);
- tokinf->User.User.Sid = (PSID) tptr;
- tptr += size;
- tokinf->User.User.Attributes = authinf->inf.User.User.Attributes;
- /* Groups */
- grps = (PTOKEN_GROUPS) tptr;
- tokinf->Groups = grps;
- grps->GroupCount = src_grps->GroupCount;
- tptr += sizeof grps->GroupCount
- + grps->GroupCount * sizeof (SID_AND_ATTRIBUTES);
- /* Group SIDs */
- for (i = 0; i < src_grps->GroupCount; ++i)
- {
- src_sid = (PSID) (base + src_grps->Groups[i].Sid);
- size = GetLengthSid (src_sid);
- CopySid (size, (PSID) tptr, src_sid);
- tokinf->Groups->Groups[i].Sid = (PSID) tptr;
- tptr += size;
- tokinf->Groups->Groups[i].Attributes = src_grps->Groups[i].Attributes;
- }
- /* Primary Group SID */
- src_sid = (PSID) (base + authinf->inf.PrimaryGroup.PrimaryGroup);
- size = GetLengthSid (src_sid);
- CopySid (size, (PSID) tptr, src_sid);
- tokinf->PrimaryGroup.PrimaryGroup = (PSID) tptr;
- tptr += size;
- /* Privileges */
- src_privs = (PTOKEN_PRIVILEGES) (base + authinf->inf.Privileges);
- size = sizeof src_privs->PrivilegeCount
- + src_privs->PrivilegeCount * sizeof (LUID_AND_ATTRIBUTES);
- memcpy (tptr, src_privs, size);
- tokinf->Privileges = (PTOKEN_PRIVILEGES) tptr;
- tptr += size;
- /* Owner */
- tokinf->Owner.Owner = NULL;
- /* Default DACL */
- src_acl = (PACL) (base + authinf->inf.DefaultDacl.DefaultDacl);
- size = src_acl->AclSize;
- memcpy (tptr, src_acl, size);
- tokinf->DefaultDacl.DefaultDacl = (PACL) tptr;
- }
-#else
- {
- /* ...on 32 bit systems we just allocate tokinf with the same size as
- we get, copy the whole structure and convert offsets into pointers. */
- if (!(tokinf = funcs->AllocateLsaHeap (authinf->inf_size)))
- return STATUS_NO_MEMORY;
- memcpy (tokinf, &authinf->inf, authinf->inf_size);
-
- /* User SID */
- tokinf->User.User.Sid = (PSID)
- ((PBYTE) tokinf + (LONG_PTR) tokinf->User.User.Sid);
- /* Groups */
- tokinf->Groups = (PTOKEN_GROUPS)
- ((PBYTE) tokinf + (LONG_PTR) tokinf->Groups);
- /* Group SIDs */
- for (i = 0; i < tokinf->Groups->GroupCount; ++i)
- tokinf->Groups->Groups[i].Sid = (PSID)
- ((PBYTE) tokinf + (LONG_PTR) tokinf->Groups->Groups[i].Sid);
- /* Primary Group SID */
- tokinf->PrimaryGroup.PrimaryGroup = (PSID)
- ((PBYTE) tokinf + (LONG_PTR) tokinf->PrimaryGroup.PrimaryGroup);
- /* Privileges */
- tokinf->Privileges = (PTOKEN_PRIVILEGES)
- ((PBYTE) tokinf + (LONG_PTR) tokinf->Privileges);
- /* Owner SID */
- tokinf->Owner.Owner = NULL;
- /* Default DACL */
- tokinf->DefaultDacl.DefaultDacl = (PACL)
- ((PBYTE) tokinf + (LONG_PTR) tokinf->DefaultDacl.DefaultDacl);
- }
-#endif
-
- *tok = (PVOID) tokinf;
- *tok_type = LsaTokenInformationV2;
-
- print_tokinf (tokinf, authinf->inf_size, authinf, &authinf->inf,
- (PVOID)((LONG_PTR) &authinf->inf + authinf->inf_size));
-
- /* Create logon session. */
- if (!AllocateLocallyUniqueId (logon_id))
- {
- funcs->FreeLsaHeap (*tok);
- *tok = NULL;
- cyglsa_printf ("AllocateLocallyUniqueId failed: Win32 error %lu\n",
- GetLastError ());
- return STATUS_INSUFFICIENT_RESOURCES;
- }
- stat = funcs->CreateLogonSession (logon_id);
- if (stat != STATUS_SUCCESS)
- {
- funcs->FreeLsaHeap (*tok);
- *tok = NULL;
- cyglsa_printf ("CreateLogonSession failed: 0x%08lx\n", stat);
- return stat;
- }
-
- cyglsa_printf ("BINGO!!!\n", stat);
- return STATUS_SUCCESS;
-}
-
-VOID NTAPI
-LsaApLogonTerminated(PLUID LogonId)
-{
-}
-
-NTSTATUS NTAPI
-LsaApCallPackage (PLSA_CLIENT_REQUEST request, PVOID authinf,
- PVOID client_auth_base, ULONG auth_len, PVOID *ret_buf,
- PULONG ret_buf_len, PNTSTATUS ret_stat)
-{
- return STATUS_NOT_IMPLEMENTED;
-}
diff --git a/winsup/lsaauth/cyglsa.din b/winsup/lsaauth/cyglsa.din
deleted file mode 100644
index 69eece0cb..000000000
--- a/winsup/lsaauth/cyglsa.din
+++ /dev/null
@@ -1,9 +0,0 @@
-LIBRARY "cyglsa"
-
-EXPORTS
-LsaApInitializePackage = LsaApInitializePackage@20
-LsaApLogonUserEx = LsaApLogonUserEx@56
-LsaApLogonTerminated = LsaApLogonTerminated@4
-LsaApCallPackage = LsaApCallPackage@28
-LsaApCallPackagePassthrough = LsaApCallPackage@28
-LsaApCallPackageUntrusted = LsaApCallPackage@28
diff --git a/winsup/lsaauth/cyglsa64.def b/winsup/lsaauth/cyglsa64.def
deleted file mode 100644
index 7b2d5921e..000000000
--- a/winsup/lsaauth/cyglsa64.def
+++ /dev/null
@@ -1,9 +0,0 @@
-LIBRARY "cyglsa64"
-
-EXPORTS
-LsaApInitializePackage
-LsaApLogonUserEx
-LsaApLogonTerminated
-LsaApCallPackage
-LsaApCallPackagePassthrough = LsaApCallPackage
-LsaApCallPackageUntrusted = LsaApCallPackage
--
2.28.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/6] Drop cygwin version.o from cygserver
2020-10-20 13:42 [PATCH 0/6] More Makefile/configure cleanups Jon Turney
2020-10-20 13:42 ` [PATCH 1/6] Remove lsaauth Jon Turney
@ 2020-10-20 13:43 ` Jon Turney
2020-10-20 13:43 ` [PATCH 3/6] gendef generates sigfe.s and cygwin.def Jon Turney
` (3 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-20 13:43 UTC (permalink / raw)
To: cygwin-patches; +Cc: Jon Turney
The data it contains isn't referenced since 9e9bc3a4.
---
winsup/cygserver/Makefile.in | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/winsup/cygserver/Makefile.in b/winsup/cygserver/Makefile.in
index e360d8fd0..7b250dd68 100644
--- a/winsup/cygserver/Makefile.in
+++ b/winsup/cygserver/Makefile.in
@@ -41,8 +41,6 @@ OBJS:= cygserver.o client.o process.o msg.o sem.o shm.o threaded_queue.o \
sysv_msg.o sysv_sem.o sysv_shm.o setpwd.o pwdgrp.o
LIBOBJS:=${patsubst %.o,lib%.o,$(OBJS)}
-CYGWIN_OBJS:=$(cygwin_build)/version.o
-
CYGWIN_LIB:=$(cygwin_build)/libcygwin.a
all: cygserver.exe
@@ -62,7 +60,7 @@ libclean:
fullclean: clean libclean
-cygserver.exe: $(CYGWIN_LIB) $(OBJS) $(CYGWIN_OBJS)
+cygserver.exe: $(CYGWIN_LIB) $(OBJS)
$(CXX) -o $@ ${wordlist 2,999,$^} -static -static-libgcc -B$(cygwin_build) -lntdll
$(cygwin_build)/%.o:
--
2.28.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 3/6] gendef generates sigfe.s and cygwin.def
2020-10-20 13:42 [PATCH 0/6] More Makefile/configure cleanups Jon Turney
2020-10-20 13:42 ` [PATCH 1/6] Remove lsaauth Jon Turney
2020-10-20 13:43 ` [PATCH 2/6] Drop cygwin version.o from cygserver Jon Turney
@ 2020-10-20 13:43 ` Jon Turney
2020-10-21 14:31 ` Jon Turney
2020-10-20 13:43 ` [PATCH 4/6] Remove nostdlib Makefile variable Jon Turney
` (2 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Jon Turney @ 2020-10-20 13:43 UTC (permalink / raw)
To: cygwin-patches; +Cc: Jon Turney
Express that gendef generates sigfe.s and cygwin.def in a slightly less
nutty way.
---
winsup/cygwin/Makefile.in | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
index a56a311b8..9d05b17b3 100644
--- a/winsup/cygwin/Makefile.in
+++ b/winsup/cygwin/Makefile.in
@@ -785,16 +785,13 @@ $(VERSION_OFILES): version.cc
Makefile: ${srcdir}/Makefile.in
/bin/sh ./config.status
-$(DEF_FILE): gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
+$(DEF_FILE) sigfe.s: gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
$(word 1,$^) --cpu=${target_cpu} --output-def=$@ --tlsoffsets=$(word 2,$^) $(wordlist 3,99,$^)
$(srcdir)/$(TLSOFFSETS_H): gentls_offsets cygtls.h
$^ $@ $(target_cpu) $(COMPILE.cc) -c || rm $@
sigfe.s: $(DEF_FILE)
- @[ -s $@ ] || \
- { rm -f $(DEF_FILE); $(MAKE) -s -j1 $(DEF_FILE); }; \
- [ -s $@ ] && touch $@
sigfe.o: sigfe.s $(srcdir)/$(TLSOFFSETS_H)
$(CC) ${CFLAGS} -c -o $@ $<
--
2.28.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 4/6] Remove nostdlib Makefile variable
2020-10-20 13:42 [PATCH 0/6] More Makefile/configure cleanups Jon Turney
` (2 preceding siblings ...)
2020-10-20 13:43 ` [PATCH 3/6] gendef generates sigfe.s and cygwin.def Jon Turney
@ 2020-10-20 13:43 ` Jon Turney
2020-10-20 13:43 ` [PATCH 5/6] Drop do-nothing install_host target Jon Turney
2020-10-20 13:43 ` [PATCH 6/6] Drop do-nothing install_target target Jon Turney
5 siblings, 0 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-20 13:43 UTC (permalink / raw)
To: cygwin-patches; +Cc: Jon Turney
It's used in one place, and it's value is unconditional.
---
winsup/Makefile.common | 2 --
winsup/cygwin/Makefile.in | 2 +-
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/winsup/Makefile.common b/winsup/Makefile.common
index 69cac9b43..3141bd111 100644
--- a/winsup/Makefile.common
+++ b/winsup/Makefile.common
@@ -30,8 +30,6 @@ top_builddir:=$(call justdir,${target_builddir})
cygwin_build:=${target_builddir}/winsup/cygwin
newlib_build:=${target_builddir}/newlib
-nostdlib:=-nostdlib
-
VPATH:=${srcdir}
.SUFFIXES:
diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
index 9d05b17b3..0dca13fab 100644
--- a/winsup/cygwin/Makefile.in
+++ b/winsup/cygwin/Makefile.in
@@ -679,7 +679,7 @@ $(LDSCRIPT): $(LDSCRIPT).in
$(TEST_DLL_NAME): $(LDSCRIPT) dllfixdbg $(DLL_OFILES) $(LIBSERVER) $(LIBC) $(LIBM) $(API_VER) Makefile $(VERSION_OFILES)
$(CXX) $(CXXFLAGS) \
-mno-use-libstdc-wrappers \
- -Wl,--gc-sections $(nostdlib) -Wl,-T$(firstword $^) -static \
+ -Wl,--gc-sections -nostdlib -Wl,-T$(firstword $^) -static \
-Wl,--heap=0 -Wl,--out-implib,cygdll.a -shared -o $@ \
-e $(DLL_ENTRY) $(DEF_FILE) $(DLL_OFILES) $(VERSION_OFILES) \
$(MALLOC_OBJ) $(LIBSERVER) $(LIBM) $(LIBC) \
--
2.28.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 5/6] Drop do-nothing install_host target
2020-10-20 13:42 [PATCH 0/6] More Makefile/configure cleanups Jon Turney
` (3 preceding siblings ...)
2020-10-20 13:43 ` [PATCH 4/6] Remove nostdlib Makefile variable Jon Turney
@ 2020-10-20 13:43 ` Jon Turney
2020-10-20 13:43 ` [PATCH 6/6] Drop do-nothing install_target target Jon Turney
5 siblings, 0 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-20 13:43 UTC (permalink / raw)
To: cygwin-patches; +Cc: Jon Turney
Drop do-nothing install_host target, which is only used when not
cross-compiling.
---
winsup/cygserver/configure.ac | 3 ---
winsup/cygwin/Makefile.in | 7 ++-----
winsup/cygwin/configure.ac | 3 ---
winsup/testsuite/Makefile.in | 4 +---
4 files changed, 3 insertions(+), 14 deletions(-)
diff --git a/winsup/cygserver/configure.ac b/winsup/cygserver/configure.ac
index 9a6baceb7..4ff784e47 100644
--- a/winsup/cygserver/configure.ac
+++ b/winsup/cygserver/configure.ac
@@ -30,16 +30,13 @@ AC_CYGWIN_INCLUDES
case "$with_cross_host" in
""|*cygwin*)
all_host="all_host"
- install_host="install_host"
;;
*)
all_host=
- install_host=
;;
esac
AC_SUBST(all_host)
-AC_SUBST(install_host)
AC_CHECK_TOOL(AR, ar, ar)
AC_CHECK_TOOL(AS, as, as)
diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
index 0dca13fab..33ee17d1e 100644
--- a/winsup/cygwin/Makefile.in
+++ b/winsup/cygwin/Makefile.in
@@ -570,11 +570,10 @@ fhandler_proc_CFLAGS+=-DUSERNAME="\"$(USER)\"" -DHOSTNAME="\"$(HOSTNAME)\""
fhandler_proc_CFLAGS+=-DGCC_VERSION="\"`$(CC) -v 2>&1 | tail -n 1`\""
.PHONY: all force dll_ofiles install all_target install_target all_host \
- install_host install install-libs install-headers \
+ install install-libs install-headers \
clean distclean realclean maintainer-clean
all_host=@all_host@
-install_host=@install_host@
all: all_target $(all_host)
@@ -585,7 +584,7 @@ all_host: $(TEST_LIB_NAME)
force:
install: install-libs install-headers install-man install-ldif install_target \
- $(install_host) $(install_target)
+ $(install_target)
uninstall: uninstall-libs uninstall-headers uninstall-man
@@ -628,8 +627,6 @@ install-ldif:
install_target:
-install_host:
-
uninstall-libs: $(TARGET_LIBS)
rm -f $(bindir)/$(DLL_NAME); \
for i in $^; do \
diff --git a/winsup/cygwin/configure.ac b/winsup/cygwin/configure.ac
index 0e9df29bb..aafc4d925 100644
--- a/winsup/cygwin/configure.ac
+++ b/winsup/cygwin/configure.ac
@@ -32,16 +32,13 @@ AC_CYGWIN_INCLUDES
case "$with_cross_host" in
""|*cygwin*)
all_host="all_host"
- install_host="install_host"
;;
*)
all_host=
- install_host=
;;
esac
AC_SUBST(all_host)
-AC_SUBST(install_host)
AC_CHECK_TOOL(AR, ar, ar)
AC_CHECK_TOOL(AS, as, as)
diff --git a/winsup/testsuite/Makefile.in b/winsup/testsuite/Makefile.in
index a86a35b88..050d5b164 100644
--- a/winsup/testsuite/Makefile.in
+++ b/winsup/testsuite/Makefile.in
@@ -82,7 +82,7 @@ override COMPILE_CC:=${filter-out -O%,$(COMPILE_CC)}
override CFLAGS:=${filter-out -O%,$(CFLAGS)}
export CFLAGS
-.PHONY: all force dll_ofiles install all_target install_target install_host
+.PHONY: all force dll_ofiles install all_target install_target
.SUFFIXES:
.SUFFIXES: .c .cc .def .a .o .d
@@ -93,8 +93,6 @@ force:
install:
-install_host:
-
clean:
-rm -f *.o *.dll *.a *.exp junk *.bak *.base *.exe testsuite/* *.d *.dat
--
2.28.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 6/6] Drop do-nothing install_target target
2020-10-20 13:42 [PATCH 0/6] More Makefile/configure cleanups Jon Turney
` (4 preceding siblings ...)
2020-10-20 13:43 ` [PATCH 5/6] Drop do-nothing install_host target Jon Turney
@ 2020-10-20 13:43 ` Jon Turney
5 siblings, 0 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-20 13:43 UTC (permalink / raw)
To: cygwin-patches; +Cc: Jon Turney
---
winsup/cygwin/Makefile.in | 7 ++-----
winsup/testsuite/Makefile.in | 2 +-
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
index 33ee17d1e..19dea4661 100644
--- a/winsup/cygwin/Makefile.in
+++ b/winsup/cygwin/Makefile.in
@@ -569,7 +569,7 @@ exec_CFLAGS:=-fno-builtin-execve
fhandler_proc_CFLAGS+=-DUSERNAME="\"$(USER)\"" -DHOSTNAME="\"$(HOSTNAME)\""
fhandler_proc_CFLAGS+=-DGCC_VERSION="\"`$(CC) -v 2>&1 | tail -n 1`\""
-.PHONY: all force dll_ofiles install all_target install_target all_host \
+.PHONY: all force dll_ofiles install all_target all_host \
install install-libs install-headers \
clean distclean realclean maintainer-clean
@@ -583,8 +583,7 @@ all_host: $(TEST_LIB_NAME)
force:
-install: install-libs install-headers install-man install-ldif install_target \
- $(install_target)
+install: install-libs install-headers install-man install-ldif
uninstall: uninstall-libs uninstall-headers uninstall-man
@@ -625,8 +624,6 @@ install-ldif:
@$(MKDIRP) $(DESTDIR)$(datarootdir)/cygwin
$(INSTALL_DATA) $(srcdir)/cygwin.ldif $(DESTDIR)$(datarootdir)/cygwin
-install_target:
-
uninstall-libs: $(TARGET_LIBS)
rm -f $(bindir)/$(DLL_NAME); \
for i in $^; do \
diff --git a/winsup/testsuite/Makefile.in b/winsup/testsuite/Makefile.in
index 050d5b164..1b0d0de59 100644
--- a/winsup/testsuite/Makefile.in
+++ b/winsup/testsuite/Makefile.in
@@ -82,7 +82,7 @@ override COMPILE_CC:=${filter-out -O%,$(COMPILE_CC)}
override CFLAGS:=${filter-out -O%,$(CFLAGS)}
export CFLAGS
-.PHONY: all force dll_ofiles install all_target install_target
+.PHONY: all force dll_ofiles install all_target
.SUFFIXES:
.SUFFIXES: .c .cc .def .a .o .d
--
2.28.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/6] gendef generates sigfe.s and cygwin.def
2020-10-20 13:43 ` [PATCH 3/6] gendef generates sigfe.s and cygwin.def Jon Turney
@ 2020-10-21 14:31 ` Jon Turney
2020-10-21 15:07 ` Corinna Vinschen
2020-10-27 16:09 ` Jon Turney
0 siblings, 2 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-21 14:31 UTC (permalink / raw)
To: Cygwin Patches
[-- Attachment #1: Type: text/plain, Size: 1390 bytes --]
On 20/10/2020 14:43, Jon Turney wrote:
> Express that gendef generates sigfe.s and cygwin.def in a slightly less
> nutty way.
> ---
> winsup/cygwin/Makefile.in | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
> index a56a311b8..9d05b17b3 100644
> --- a/winsup/cygwin/Makefile.in
> +++ b/winsup/cygwin/Makefile.in
> @@ -785,16 +785,13 @@ $(VERSION_OFILES): version.cc
> Makefile: ${srcdir}/Makefile.in
> /bin/sh ./config.status
>
> -$(DEF_FILE): gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
> +$(DEF_FILE) sigfe.s: gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
> $(word 1,$^) --cpu=${target_cpu} --output-def=$@ --tlsoffsets=$(word 2,$^) $(wordlist 3,99,$^)
Using $@ is wrong if make decides to build sigfe.s first, and $^ will
contain an unwanted $(DEF_FILE) from the dependency below.
So please try the attached instead.
But maybe I need to do a bit more staring at [1].
[1]
https://www.gnu.org/software/automake/manual/html_node/Multiple-Outputs.html
>
> $(srcdir)/$(TLSOFFSETS_H): gentls_offsets cygtls.h
> $^ $@ $(target_cpu) $(COMPILE.cc) -c || rm $@
>
> sigfe.s: $(DEF_FILE)
> - @[ -s $@ ] || \
> - { rm -f $(DEF_FILE); $(MAKE) -s -j1 $(DEF_FILE); }; \
> - [ -s $@ ] && touch $@
>
> sigfe.o: sigfe.s $(srcdir)/$(TLSOFFSETS_H)
> $(CC) ${CFLAGS} -c -o $@ $<
>
[-- Attachment #2: 0003-gendef-generates-sigfe.s-and-cygwin.def.patch --]
[-- Type: text/plain, Size: 1313 bytes --]
From 15f8cc0f7cd273f1d10a7483399403487b2c2eb2 Mon Sep 17 00:00:00 2001
From: Jon Turney <jon.turney@dronecode.org.uk>
Date: Mon, 12 Oct 2020 16:59:02 +0100
Subject: [PATCH 3/6] gendef generates sigfe.s and cygwin.def
Express that gendef generates sigfe.s and cygwin.def in a slightly less
nutty way.
---
winsup/cygwin/Makefile.in | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
index a56a311b8..70e38ead6 100644
--- a/winsup/cygwin/Makefile.in
+++ b/winsup/cygwin/Makefile.in
@@ -785,16 +785,13 @@ $(VERSION_OFILES): version.cc
Makefile: ${srcdir}/Makefile.in
/bin/sh ./config.status
-$(DEF_FILE): gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
- $(word 1,$^) --cpu=${target_cpu} --output-def=$@ --tlsoffsets=$(word 2,$^) $(wordlist 3,99,$^)
+$(DEF_FILE) sigfe.s: gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
+ $(word 1,$^) --cpu=${target_cpu} --output-def=$(DEF_FILE) --tlsoffsets=$(word 2,$^) $(wordlist 3,4,$^)
$(srcdir)/$(TLSOFFSETS_H): gentls_offsets cygtls.h
$^ $@ $(target_cpu) $(COMPILE.cc) -c || rm $@
sigfe.s: $(DEF_FILE)
- @[ -s $@ ] || \
- { rm -f $(DEF_FILE); $(MAKE) -s -j1 $(DEF_FILE); }; \
- [ -s $@ ] && touch $@
sigfe.o: sigfe.s $(srcdir)/$(TLSOFFSETS_H)
$(CC) ${CFLAGS} -c -o $@ $<
--
2.28.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/6] gendef generates sigfe.s and cygwin.def
2020-10-21 14:31 ` Jon Turney
@ 2020-10-21 15:07 ` Corinna Vinschen
2020-10-23 8:16 ` marco atzeri
2020-10-27 16:09 ` Jon Turney
1 sibling, 1 reply; 12+ messages in thread
From: Corinna Vinschen @ 2020-10-21 15:07 UTC (permalink / raw)
To: cygwin-patches
On Oct 21 15:31, Jon Turney wrote:
> On 20/10/2020 14:43, Jon Turney wrote:
> > Express that gendef generates sigfe.s and cygwin.def in a slightly less
> > nutty way.
> > ---
> > winsup/cygwin/Makefile.in | 5 +----
> > 1 file changed, 1 insertion(+), 4 deletions(-)
> >
> > diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
> > index a56a311b8..9d05b17b3 100644
> > --- a/winsup/cygwin/Makefile.in
> > +++ b/winsup/cygwin/Makefile.in
> > @@ -785,16 +785,13 @@ $(VERSION_OFILES): version.cc
> > Makefile: ${srcdir}/Makefile.in
> > /bin/sh ./config.status
> > -$(DEF_FILE): gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
> > +$(DEF_FILE) sigfe.s: gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
> > $(word 1,$^) --cpu=${target_cpu} --output-def=$@ --tlsoffsets=$(word 2,$^) $(wordlist 3,99,$^)
>
> Using $@ is wrong if make decides to build sigfe.s first, and $^ will
> contain an unwanted $(DEF_FILE) from the dependency below.
>
> So please try the attached instead.
With this patch, both architectures build and *drumrole* still
seem to run fine.
I'd say, ship it!
Thanks,
Corinna
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/6] gendef generates sigfe.s and cygwin.def
2020-10-21 15:07 ` Corinna Vinschen
@ 2020-10-23 8:16 ` marco atzeri
2020-10-23 19:53 ` Jon Turney
0 siblings, 1 reply; 12+ messages in thread
From: marco atzeri @ 2020-10-23 8:16 UTC (permalink / raw)
To: cygwin-patches
On Wed, Oct 21, 2020 at 5:07 PM Corinna Vinschen
<corinna-cygwin@cygwin.com> wrote:
>
> On Oct 21 15:31, Jon Turney wrote:
> > On 20/10/2020 14:43, Jon Turney wrote:
> > > Express that gendef generates sigfe.s and cygwin.def in a slightly less
> > > nutty way.
> > > ---
> > > winsup/cygwin/Makefile.in | 5 +----
> > > 1 file changed, 1 insertion(+), 4 deletions(-)
> > >
> > > diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
> > > index a56a311b8..9d05b17b3 100644
> > > --- a/winsup/cygwin/Makefile.in
> > > +++ b/winsup/cygwin/Makefile.in
> > > @@ -785,16 +785,13 @@ $(VERSION_OFILES): version.cc
> > > Makefile: ${srcdir}/Makefile.in
> > > /bin/sh ./config.status
> > > -$(DEF_FILE): gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
> > > +$(DEF_FILE) sigfe.s: gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
> > > $(word 1,$^) --cpu=${target_cpu} --output-def=$@ --tlsoffsets=$(word 2,$^) $(wordlist 3,99,$^)
> >
> > Using $@ is wrong if make decides to build sigfe.s first, and $^ will
> > contain an unwanted $(DEF_FILE) from the dependency below.
> >
> > So please try the attached instead.
>
> With this patch, both architectures build and *drumrole* still
> seem to run fine.
>
> I'd say, ship it!
>
>
> Thanks,
> Corinna
Jon,
in the past sigfe.s was missing from the debuginfo
https://stackoverflow.com/questions/44770147/gdb-in-cygwin-is-missing-sigfe-s
and I assume it is still missing, can you double check ?
Thanks
Marco
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/6] gendef generates sigfe.s and cygwin.def
2020-10-23 8:16 ` marco atzeri
@ 2020-10-23 19:53 ` Jon Turney
0 siblings, 0 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-23 19:53 UTC (permalink / raw)
To: Cygwin Patches
On 23/10/2020 09:16, marco atzeri via Cygwin-patches wrote:
>
> in the past sigfe.s was missing from the debuginfo
> https://stackoverflow.com/questions/44770147/gdb-in-cygwin-is-missing-sigfe-s
>
> and I assume it is still missing, can you double check ?
Yes, I vaguely remember this being discussed in the past.
There's some sort of interaction with how cygport identifies source
files to include in the debuginfo package which ends up not working
correctly for this file.
(I'm not sure if it's due to failure to propagate the -fdebug-prefix-map
which cygport adds to the compiler flags, or if this file is missing
some expected .debug section, or something else entirely)
Anyhow, an investigation should start with looking why cygport omits
this file.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/6] gendef generates sigfe.s and cygwin.def
2020-10-21 14:31 ` Jon Turney
2020-10-21 15:07 ` Corinna Vinschen
@ 2020-10-27 16:09 ` Jon Turney
1 sibling, 0 replies; 12+ messages in thread
From: Jon Turney @ 2020-10-27 16:09 UTC (permalink / raw)
To: Cygwin Patches
On 21/10/2020 15:31, Jon Turney wrote:
> On 20/10/2020 14:43, Jon Turney wrote:
>> Express that gendef generates sigfe.s and cygwin.def in a slightly less
>> nutty way.
>> ---
>> winsup/cygwin/Makefile.in | 5 +----
>> 1 file changed, 1 insertion(+), 4 deletions(-)
>>
>> diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
>> index a56a311b8..9d05b17b3 100644
>> --- a/winsup/cygwin/Makefile.in
>> +++ b/winsup/cygwin/Makefile.in
>> @@ -785,16 +785,13 @@ $(VERSION_OFILES): version.cc
>> Makefile: ${srcdir}/Makefile.in
>> /bin/sh ./config.status
>> -$(DEF_FILE): gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
>> +$(DEF_FILE) sigfe.s: gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
>> $(word 1,$^) --cpu=${target_cpu} --output-def=$@
>> --tlsoffsets=$(word 2,$^) $(wordlist 3,99,$^)
>
> Using $@ is wrong if make decides to build sigfe.s first, and $^ will
> contain an unwanted $(DEF_FILE) from the dependency below.
>
> So please try the attached instead.
>
> But maybe I need to do a bit more staring at [1].
>
> [1]
> https://www.gnu.org/software/automake/manual/html_node/Multiple-Outputs.html
>
Notwithstanding that, this formulation doesn't actually seem to avoid
invoking the rule twice in a parallel build, so I think I need to revert
this.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-10-27 16:09 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-20 13:42 [PATCH 0/6] More Makefile/configure cleanups Jon Turney
2020-10-20 13:42 ` [PATCH 1/6] Remove lsaauth Jon Turney
2020-10-20 13:43 ` [PATCH 2/6] Drop cygwin version.o from cygserver Jon Turney
2020-10-20 13:43 ` [PATCH 3/6] gendef generates sigfe.s and cygwin.def Jon Turney
2020-10-21 14:31 ` Jon Turney
2020-10-21 15:07 ` Corinna Vinschen
2020-10-23 8:16 ` marco atzeri
2020-10-23 19:53 ` Jon Turney
2020-10-27 16:09 ` Jon Turney
2020-10-20 13:43 ` [PATCH 4/6] Remove nostdlib Makefile variable Jon Turney
2020-10-20 13:43 ` [PATCH 5/6] Drop do-nothing install_host target Jon Turney
2020-10-20 13:43 ` [PATCH 6/6] Drop do-nothing install_target target Jon Turney
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).