* Re: Very Slow Setup Parsing / was Re: Segmentation Faults
[not found] <1543162243.598824.1490201348902.ref@mail.yahoo.com>
@ 2017-03-22 18:01 ` Ian Lambert via cygwin
2017-03-22 18:20 ` Nellis, Kenneth (Conduent)
0 siblings, 1 reply; 4+ messages in thread
From: Ian Lambert via cygwin @ 2017-03-22 18:01 UTC (permalink / raw)
To: cygwin, Ken Brown
On Wed, 3/22/17, Ken Brown <kbrown@cornell.edu> wrote:
Subject: Re: Very Slow Setup Parsing / was Re: Segmentation Faults
To: cygwin@cygwin.com
Date: Wednesday, March 22, 2017, 12:10 PM
On 3/22/2017 11:59 AM,
Ian Lambert via cygwin wrote:
> I've
now downloaded a complete cygwin mirror
>
onto a networked storage, done a new install, and
> cygwin works OK again. However, doing
updates or
> package installs is (1)
extremely slow, and (2) giving
> a below
reported permissions problem.
>
> (1) Slowness. After the setup initial
steps and pointing
> to the local install
location, I get to the following display
> for 10s of minutes to hours (see log
excerpt farther down).
> It eventually
goes to the next step. There is a very
>
low, steady network traffic during the delay. This
> storage and network is usually fast for
other things,
> including during actual
package installs.
You might
want to checkout the '-m --mirror-mode' option to
setup.
= = = = =
Ken,
Works great! Hoping my mirror stays "clean."
I missed the discussions of this "new" option,
and documentation is the last thing to be updated.
:)
https://cygwin.com/faq.html#faq.setup.cli
Thanks!
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: Very Slow Setup Parsing / was Re: Segmentation Faults
2017-03-22 18:01 ` Very Slow Setup Parsing / was Re: Segmentation Faults Ian Lambert via cygwin
@ 2017-03-22 18:20 ` Nellis, Kenneth (Conduent)
0 siblings, 0 replies; 4+ messages in thread
From: Nellis, Kenneth (Conduent) @ 2017-03-22 18:20 UTC (permalink / raw)
To: cygwin
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 539 bytes --]
From: Ian Lambert
> ...
> I missed the discussions of this "new" option,
> and documentation is the last thing to be updated.
> :)
> https://cygwin.com/faq.html#faq.setup.cli
It's also incorrect in saying that the listing is written to setup.log.
It seems to write to stdout instead.
--Ken Nellis
\x03BKCB\x1cØ\x19[H\x1c\^[Ü\x1cÎ\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÜ\x1cØ\x19[\Ë\x1d^[[\x03BTN\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÙ\KÃB^[ØÝ[Y[\x18]\x1a[Û\b\b\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÙ^[ØÜË\x1d^[[\x03B[ÝXØÜXH\x1a[Î\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÛ[\vÈÝ[ÝXØÜXK\Ú[\^[\x19CBB
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Very Slow Setup Parsing / was Re: Segmentation Faults
2017-03-22 16:10 ` Ian Lambert via cygwin
@ 2017-03-22 16:53 ` Ken Brown
0 siblings, 0 replies; 4+ messages in thread
From: Ken Brown @ 2017-03-22 16:53 UTC (permalink / raw)
To: cygwin
On 3/22/2017 11:59 AM, Ian Lambert via cygwin wrote:
> I've now downloaded a complete cygwin mirror
> onto a networked storage, done a new install, and
> cygwin works OK again. However, doing updates or
> package installs is (1) extremely slow, and (2) giving
> a below reported permissions problem.
>
> (1) Slowness. After the setup initial steps and pointing
> to the local install location, I get to the following display
> for 10s of minutes to hours (see log excerpt farther down).
> It eventually goes to the next step. There is a very
> low, steady network traffic during the delay. This
> storage and network is usually fast for other things,
> including during actual package installs.
You might want to checkout the '-m --mirror-mode' option to setup.
Ken
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
* Very Slow Setup Parsing / was Re: Segmentation Faults
[not found] <246914579.672255.1490198343462.ref@mail.yahoo.com>
@ 2017-03-22 16:10 ` Ian Lambert via cygwin
2017-03-22 16:53 ` Ken Brown
0 siblings, 1 reply; 4+ messages in thread
From: Ian Lambert via cygwin @ 2017-03-22 16:10 UTC (permalink / raw)
To: cygwin, Marco Atzeri
On Wed, 2/8/17, Marco Atzeri <marco.atzeri@gmail.com> wrote:
Subject: Re: Segmentation Faults
To: cygwin@cygwin.com
Date: Wednesday, February 8, 2017, 1:31 PM
On 08/02/2017 18:13, Ian
Lambert via cygwin wrote:
> FWIW, since
doing the updates late last month, many programs are seg
faulting for me, including XWin, wget, curl, ssh, procps,
top, gawk...
>
> This is 64 bit on
Windos 7 "professional."
>
> Below is excerpt from
the end of a strace of wget http://www.yahoo.com/
>
> Is "windows
error 2" easy to fix? :)
Any bloda running around ?
I will bet on some other program interfering on
cygwin
program execution or dll loading.
...
Check also if all the DLL needed by wget, curl,
ssh, procps, top, gawk
are still there. I
saw case where the Antivirus removed the dll's
without big notice.
= = = = =
There is probably lots of bloda around, but that was
not the problem. I suspect incompatible versions of
some things, because of the way I'd been updating
using apt-cyg following announcements. I started
chasing down DLLs and dependencies, but it was
too slow manually. Now I have a new, different
slowness automatically.
I've now downloaded a complete cygwin mirror
onto a networked storage, done a new install, and
cygwin works OK again. However, doing updates or
package installs is (1) extremely slow, and (2) giving
a below reported permissions problem.
(1) Slowness. After the setup initial steps and pointing
to the local install location, I get to the following display
for 10s of minutes to hours (see log excerpt farther down).
It eventually goes to the next step. There is a very
low, steady network traffic during the delay. This
storage and network is usually fast for other things,
including during actual package installs.
Is it searching through all the files in the mirror?
Can I change something to make this faster?
Setup Display:
Cygwin Setup (Not Responding)
Parsing...
H:\home\...
100% (9704k/9704k)
Package: [static progress bar]
(2) I'm seeing the following error, and reporting as it
suggests. It doesn't seem to
cause any problem, but I can't change the permissions
(non-admin) to make it go away.
Package: _/Unknown package
inetutils-server.sh exit code 1
check /var/log/setup.log.full and report any problems
2017/03/17 13:10:16 Starting cygwin install, version 2.877
2017/03/17 13:10:16 User has NO backup/restore rights
2017/03/17 13:10:16 Current Directory: H:\home\...\ftwin\mirror...\cygwin
2017/03/17 13:10:16 Could not open Service control manager
...
Rebuilding info directory
install-info: warning: no info dir entry in `/usr/share/info/abs_integrate.info'
install-info: warning: no info dir entry in `/usr/share/info/automake-history.info.gz'
install-info: warning: no info dir entry in `/usr/share/info/automake-history1.12.info.gz'
install-info: warning: no info dir entry in `/usr/share/info/automake-history1.13.info.gz'
install-info: warning: no info dir entry in `/usr/share/info/drawutils.info'
install-info: warning: no info dir entry in `/usr/share/info/kovacicODE.info'
install-info: warning: no info dir entry in `/usr/share/info/logic.info'
install-info: warning: no info dir entry in `/usr/share/info/maxima-index.lisp'
2017/03/17 16:32:18 running: E:\cygwin64-3\bin\bash.exe --norc --noprofile "/etc/postinstall/mintty.sh"
2017/03/17 16:32:18 running: E:\cygwin64-3\bin\bash.exe --norc --noprofile "/etc/postinstall/inetutils-server.sh"
*** Warning: The owner and the Administrators need
*** Warning: to have .w. permission to /var/run.
*** Warning: Here are the current permissions and ACLS:
*** Warning: drwxr-xr-x 1 myuser Domain Users 0 Mar 14 17:48 /var/run
*** Warning: # file: /var/run
*** Warning: # owner: myuser
*** Warning: # group: Domain Users
*** Warning: user::rwx
*** Warning: group::r-x
*** Warning: other:r-x
*** Warning:
*** Warning: Please change the user and/or group ownership,
*** Warning: permissions, or ACLs of /var/run.
*** ERROR: Problem with /var/run directory. Exiting.
*** Warning: The owner and the Administrators need
*** Warning: to have .w. permission to /var/run.
*** Warning: Here are the current permissions and ACLS:
*** Warning: drwxr-xr-x 1 myuser Domain Users 0 Mar 14 17:48 /var/run
*** Warning: # file: /var/run
*** Warning: # owner: myuser
*** Warning: # group: Domain Users
*** Warning: user::rwx
*** Warning: group::r-x
*** Warning: other:r-x
*** Warning:
*** Warning: Please change the user and/or group ownership,
*** Warning: permissions, or ACLs of /var/run.
*** ERROR: Problem with /var/run directory. Exiting.
2017/03/17 16:32:26 abnormal exit: exit code=1
<snip>
Error connecting to currency server. <urlopen error [Errno 8] Name or service not known>
<snip>
2017/03/17 16:34:38 Ending cygwin install
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-03-22 18:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1543162243.598824.1490201348902.ref@mail.yahoo.com>
2017-03-22 18:01 ` Very Slow Setup Parsing / was Re: Segmentation Faults Ian Lambert via cygwin
2017-03-22 18:20 ` Nellis, Kenneth (Conduent)
[not found] <246914579.672255.1490198343462.ref@mail.yahoo.com>
2017-03-22 16:10 ` Ian Lambert via cygwin
2017-03-22 16:53 ` Ken Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).