* tee: 'standard output': Permission denied
@ 2020-12-27 2:04 Andry
2020-12-29 21:50 ` Andry
0 siblings, 1 reply; 19+ messages in thread
From: Andry @ 2020-12-27 2:04 UTC (permalink / raw)
To: cygwin
Hello Cygwin,
I am trying to change directory before run a bash shell with login:
"%CYGWIN_ROOT%\bin\bash.exe" -c "{ cd ""%PWD:\=/%""; CHERE_INVOKING=. ""%CYGWIN_ROOT:\=/%/bin/bash.exe"" -l -i; } 2>&1 | ""%CYGWIN_ROOT:\=/%/bin/tee.exe"" -a ""%PROJECT_LOG_FILE:\=/%"""
, where:
CYGWIN_ROOT - path to cygwin root directory
PWD - arbitrary working directory to run bash from
PROJECT_LOG_FILE - path to log file to log stdout+stderr
Currently this throws the error: `tee: 'standard output': Permission
denied` if try to type not valid command or expression, and input is
stalls.
The same behaviour in the msys.
Do anyone have a solution?
^ permalink raw reply [flat|nested] 19+ messages in thread
* tee: 'standard output': Permission denied
2020-12-27 2:04 tee: 'standard output': Permission denied Andry
@ 2020-12-29 21:50 ` Andry
2020-12-30 1:29 ` Kevin Schnitzius
` (2 more replies)
0 siblings, 3 replies; 19+ messages in thread
From: Andry @ 2020-12-29 21:50 UTC (permalink / raw)
To: cygwin
Hello Cygwin,
>I am trying to change directory before run a bash shell with login:
I've minimized to a minimal example to repro the issue:
*run_cygwin_bash.bat*:
```
@echo off
set CYGWIN_ROOT=...
set PWD=...
set PROJECT_LOG_FILE=...
chcp.com 65001 >nul
"%CYGWIN_ROOT%\bin\bash.exe" -c "{ cd ""%PWD:\=/%""; CHERE_INVOKING=. ""%CYGWIN_ROOT:\=/%/bin/bash.exe"" -l -i; } 2>&1 | ""%CYGWIN_ROOT:\=/%/bin/tee.exe"" -a ""%PROJECT_LOG_FILE:\=/%"""
```
To execute:
```
c:\> start "" cmd.exe /C run_cygwin_bash.bat
```
To stall:
```
$ 123
c:/cygwin/bin/tee: 'standard output': Permission denied
```
It repro only if:
`chcp.com 65001` used together with `start "" cmd.exe ...`
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-29 21:50 ` Andry
@ 2020-12-30 1:29 ` Kevin Schnitzius
2020-12-30 2:22 ` Andry
2020-12-30 1:31 ` Doug Henderson
2020-12-30 1:45 ` Takashi Yano
2 siblings, 1 reply; 19+ messages in thread
From: Kevin Schnitzius @ 2020-12-30 1:29 UTC (permalink / raw)
To: cygwin, Andry
On Tuesday, December 29, 2020, 04:47:56 PM EST, Andry via Cygwin <cygwin@cygwin.com> wrote:
> "%CYGWIN_ROOT%\bin\bash.exe" -c "{ cd ""%PWD:\=/%""; CHERE_INVOKING=. ""%CYGWIN_ROOT:\=/%/bin/bash.exe"" -l -i; } 2>&1 | ""%CYGWIN_ROOT:\=/%/bin/tee.exe"" -a ""%PROJECT_LOG_FILE:\=/%"""
```
Cannot repro... Logfile is created correctly and commands and their output are logged there. The file encoding for the logfile is utf-8.
A couple of things though: 1. changing \ to / does not guarantee a valid Cygwin path. 2. the cd does nothing because bash -l starts the shell in the home directory. 3. Once you've started bash, you don't have to supply the full path so "/bin/bash.exe" and "/bin/tee.exe" are fine (assuming your path and mounts are set correctly)
Are any files on a remote share?Are any of the paths relative?Do any of the paths have spaces in them?
You should check out the cygpath utility...
Kevin
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-29 21:50 ` Andry
2020-12-30 1:29 ` Kevin Schnitzius
@ 2020-12-30 1:31 ` Doug Henderson
2020-12-30 1:45 ` Takashi Yano
2 siblings, 0 replies; 19+ messages in thread
From: Doug Henderson @ 2020-12-30 1:31 UTC (permalink / raw)
To: cygwin
On Tue, 29 Dec 2020 at 14:48, Andry via Cygwin <cygwin@cygwin.com> wrote:
>
> "%CYGWIN_ROOT%\bin\bash.exe" -c "{ cd ""%PWD:\=/%""; CHERE_INVOKING=.
> ""%CYGWIN_ROOT:\=/%/bin/bash.exe"" -l -i; } 2>&1 |
> ""%CYGWIN_ROOT:\=/%/bin/tee.exe"" -a ""%PROJECT_LOG_FILE:\=/%"""
> ```
>
In most situations like this, I create a bash script containing everything
I want to do within bash. Trying to get all the quoting right is a pain in
the brain.
The key lines in my .bat files (with CRLF endings) are:
set D=folder *the directory containing script
set SCRIPT=script.sh *the name if the bash script file (with LF endings)
set BASH=C:\cygwin64\bin\bash.exe
%BASH% --noprofile -o errexit -o nounset -c %D%/%SCRIPT%
Note the forward slash between script directory and script file, very
important!
Also note there is no quoting required - a big win.
First command in the bash script is usually an "export PATH=..." command.
Of course, if there is an actual permissions error, this will not fix it,
but it will allow you to more easily diagnose the problem.
HTH
Doug
--
Doug Henderson, Calgary, Alberta, Canada - from gmail.com
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-29 21:50 ` Andry
2020-12-30 1:29 ` Kevin Schnitzius
2020-12-30 1:31 ` Doug Henderson
@ 2020-12-30 1:45 ` Takashi Yano
2020-12-30 2:24 ` Andry
2 siblings, 1 reply; 19+ messages in thread
From: Takashi Yano @ 2020-12-30 1:45 UTC (permalink / raw)
To: cygwin; +Cc: Andry
On Wed, 30 Dec 2020 00:50:56 +0300
Andry via Cygwin <cygwin@cygwin.com> wrote:
> Hello Cygwin,
>
> >I am trying to change directory before run a bash shell with login:
>
> I've minimized to a minimal example to repro the issue:
>
> *run_cygwin_bash.bat*:
>
> ```
> @echo off
>
> set CYGWIN_ROOT=...
> set PWD=...
> set PROJECT_LOG_FILE=...
>
> chcp.com 65001 >nul
>
>
> "%CYGWIN_ROOT%\bin\bash.exe" -c "{ cd ""%PWD:\=/%""; CHERE_INVOKING=. ""%CYGWIN_ROOT:\=/%/bin/bash.exe"" -l -i; } 2>&1 | ""%CYGWIN_ROOT:\=/%/bin/tee.exe"" -a ""%PROJECT_LOG_FILE:\=/%"""
> ```
>
> To execute:
>
> ```
> c:\> start "" cmd.exe /C run_cygwin_bash.bat
>
> ```
>
> To stall:
>
> ```
> $ 123
> c:/cygwin/bin/tee: 'standard output': Permission denied
> ```
>
> It repro only if:
>
> `chcp.com 65001` used together with `start "" cmd.exe ...`
I cannot reproducue your problem even with chcp.com 65001 and
start "" cmd.exe ...
By the way, using tee for logging the output is not good
idea because stdout is not a tty. Due to this, less command
does not work properly.
Instead, I recommend:
@echo off
set CYGWIN_ROOT=...
set PROJECT_LOG_FILE=...
"%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; /bin/bash --login"
--
Takashi Yano <takashi.yano@nifty.ne.jp>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Re: tee: 'standard output': Permission denied
2020-12-30 1:29 ` Kevin Schnitzius
@ 2020-12-30 2:22 ` Andry
2020-12-30 19:21 ` Brian Inglis
0 siblings, 1 reply; 19+ messages in thread
From: Andry @ 2020-12-30 2:22 UTC (permalink / raw)
To: cygwin
Hello Kometes,
>Cannot repro... Logfile is created correctly and commands and their output are logged there. The file encoding for the logfile is utf-8.
The issue found in the Windows 7 x64.
>A couple of things though: 1. changing \ to / does not guarantee a valid Cygwin path.
Not sure what you talking about. Always worked.
>2. the cd does nothing because bash -l starts the shell in the home directory.
I've tested it and it does.
>3. Once you've started bash, you don't have to supply the full path so "/bin/bash.exe" and "/bin/tee.exe" are fine (assuming your path and mounts are set correctly)
You have to, because not logged shell does not have PATH registration to the `/bin`.
>Are any files on a remote share?
You cannot run cmd.exe on a remote share.
>Are any of the paths relative?Do any of the paths have spaces in them?
Does it matter?
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Re: tee: 'standard output': Permission denied
2020-12-30 1:45 ` Takashi Yano
@ 2020-12-30 2:24 ` Andry
2020-12-30 4:02 ` Takashi Yano
2020-12-30 10:13 ` Takashi Yano
0 siblings, 2 replies; 19+ messages in thread
From: Andry @ 2020-12-30 2:24 UTC (permalink / raw)
To: cygwin
Hello takashi,
>I cannot reproducue your problem even with chcp.com 65001 and
>start "" cmd.exe ...
Seems this is a bug specifically for the Windows 7 x64.
>By the way, using tee for logging the output is not good
>idea because stdout is not a tty. Due to this, less command
>does not work properly.
That is way to not break the cygwin colorization and I don't want
to start a script, all I want is to start an interactive console in
an arbitrary working directory.
>Instead, I recommend:
>
>@echo off
>set CYGWIN_ROOT=...
>set PROJECT_LOG_FILE=...
>
>"%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; /bin/bash --login"
That is not an equivalent, there is no directory to switch to BEFORE the login.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-30 2:24 ` Andry
@ 2020-12-30 4:02 ` Takashi Yano
2020-12-30 4:40 ` Takashi Yano
2020-12-30 4:49 ` Andry
2020-12-30 10:13 ` Takashi Yano
1 sibling, 2 replies; 19+ messages in thread
From: Takashi Yano @ 2020-12-30 4:02 UTC (permalink / raw)
To: cygwin; +Cc: Andry
On Wed, 30 Dec 2020 05:24:02 +0300
Andry wrote:
> Hello takashi,
>
> >I cannot reproducue your problem even with chcp.com 65001 and
> >start "" cmd.exe ...
> Seems this is a bug specifically for the Windows 7 x64.
>
> >By the way, using tee for logging the output is not good
> >idea because stdout is not a tty. Due to this, less command
> >does not work properly.
> That is way to not break the cygwin colorization and I don't want
> to start a script, all I want is to start an interactive console in
> an arbitrary working directory.
>
> >Instead, I recommend:
> >
> >@echo off
> >set CYGWIN_ROOT=...
> >set PROJECT_LOG_FILE=...
> >
> >"%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; /bin/bash --login"
> That is not an equivalent, there is no directory to switch to BEFORE the login.
I am not sure why you don't wat to use script,
how about this then?
@echo off
set CYGWIN_ROOT=...
set PWD=...
set PROJECT_LOG_FILE=...
"%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; cd \"%PWD%\"; CHERE_INVOKING=1 /bin/bash --login"
--
Takashi Yano <takashi.yano@nifty.ne.jp>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-30 4:02 ` Takashi Yano
@ 2020-12-30 4:40 ` Takashi Yano
2020-12-30 4:54 ` Andry
2020-12-30 5:11 ` Andry
2020-12-30 4:49 ` Andry
1 sibling, 2 replies; 19+ messages in thread
From: Takashi Yano @ 2020-12-30 4:40 UTC (permalink / raw)
To: cygwin
On Wed, 30 Dec 2020 13:02:58 +0900
Takashi Yano via Cygwin <cygwin@cygwin.com> wrote:
> I am not sure why you don't wat to use script,
> how about this then?
>
> @echo off
> set CYGWIN_ROOT=...
> set PWD=...
> set PROJECT_LOG_FILE=...
>
> "%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; cd \"%PWD%\"; CHERE_INVOKING=1 /bin/bash --login"
or:
@echo off
set CYGWIN_ROOT=...
set PWD=...
set PROJECT_LOG_FILE=...
cd "%PWD%"
"%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; CHERE_INVOKING=1 /bin/bash --login"
--
Takashi Yano <takashi.yano@nifty.ne.jp>
^ permalink raw reply [flat|nested] 19+ messages in thread
* tee: 'standard output': Permission denied
2020-12-30 4:02 ` Takashi Yano
2020-12-30 4:40 ` Takashi Yano
@ 2020-12-30 4:49 ` Andry
2020-12-30 5:03 ` Takashi Yano
1 sibling, 1 reply; 19+ messages in thread
From: Andry @ 2020-12-30 4:49 UTC (permalink / raw)
To: cygwin
Hello Cygwin,
>I am not sure why you don't wat to use script,
>how about this then?
>
>@echo off
>set CYGWIN_ROOT=...
>set PWD=...
>set PROJECT_LOG_FILE=...
>
>"%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; cd \"%PWD%\"; CHERE_INVOKING=1 /bin/bash --login"
1. chcp.com has no effect here
2. log is written after the `script` exit
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Re: tee: 'standard output': Permission denied
2020-12-30 4:40 ` Takashi Yano
@ 2020-12-30 4:54 ` Andry
2020-12-30 5:11 ` Andry
1 sibling, 0 replies; 19+ messages in thread
From: Andry @ 2020-12-30 4:54 UTC (permalink / raw)
To: cygwin
Hello takashi,
>or:
>...
>
>cd "%PWD%"
This does not work with long 260+ paths.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-30 4:49 ` Andry
@ 2020-12-30 5:03 ` Takashi Yano
2020-12-30 5:18 ` Andry
2020-12-30 6:40 ` Takashi Yano
0 siblings, 2 replies; 19+ messages in thread
From: Takashi Yano @ 2020-12-30 5:03 UTC (permalink / raw)
To: cygwin; +Cc: Andry
On Wed, 30 Dec 2020 07:49:07 +0300
Andry wrote:
> Hello Cygwin,
>
> >I am not sure why you don't wat to use script,
> >how about this then?
> >
> >@echo off
> >set CYGWIN_ROOT=...
> >set PWD=...
> >set PROJECT_LOG_FILE=...
> >
> >"%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; cd \"%PWD%\"; CHERE_INVOKING=1 /bin/bash --login"
>
> 1. chcp.com has no effect here
Weird. In my environment, chcp surely changes the code page.
Are you using cygwin 3.2.0 snapshot by any chance? If so, add
set CYGWIN=disable_pcon
before starting script.
> 2. log is written after the `script` exit
Add -f option to script command.
--
Takashi Yano <takashi.yano@nifty.ne.jp>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Re: tee: 'standard output': Permission denied
2020-12-30 4:40 ` Takashi Yano
2020-12-30 4:54 ` Andry
@ 2020-12-30 5:11 ` Andry
1 sibling, 0 replies; 19+ messages in thread
From: Andry @ 2020-12-30 5:11 UTC (permalink / raw)
To: cygwin
Hello Cygwin,
One more issue with the script is that the line returns forces at
some points as CR. When run bash from cmd.exe - CR+LF
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Re: tee: 'standard output': Permission denied
2020-12-30 5:03 ` Takashi Yano
@ 2020-12-30 5:18 ` Andry
2020-12-30 6:40 ` Takashi Yano
1 sibling, 0 replies; 19+ messages in thread
From: Andry @ 2020-12-30 5:18 UTC (permalink / raw)
To: cygwin
Hello Cygwin,
>Weird. In my environment, chcp surely changes the code page. Are you using cygwin 3.2.0 snapshot by any chance?
Yes, in 3.1.x (cygwin64) it works.
But the issue with the mixed CR / CR+LF in the log is still persist.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-30 5:03 ` Takashi Yano
2020-12-30 5:18 ` Andry
@ 2020-12-30 6:40 ` Takashi Yano
1 sibling, 0 replies; 19+ messages in thread
From: Takashi Yano @ 2020-12-30 6:40 UTC (permalink / raw)
To: cygwin
On Wed, 30 Dec 2020 14:03:58 +0900
Takashi Yano via Cygwin <cygwin@cygwin.com> wrote:
> On Wed, 30 Dec 2020 07:49:07 +0300
> Andry wrote:
> > Hello Cygwin,
> >
> > >I am not sure why you don't wat to use script,
> > >how about this then?
> > >
> > >@echo off
> > >set CYGWIN_ROOT=...
> > >set PWD=...
> > >set PROJECT_LOG_FILE=...
> > >
> > >"%CYGWIN_ROOT%\bin\script" -q -a "%PROJECT_LOG_FILE%" -c "chcp.com 65001 > /dev/null 2>&1; cd \"%PWD%\"; CHERE_INVOKING=1 /bin/bash --login"
> >
> > 1. chcp.com has no effect here
>
> Weird. In my environment, chcp surely changes the code page.
> Are you using cygwin 3.2.0 snapshot by any chance? If so, add
> set CYGWIN=disable_pcon
> before starting script.
Sorry, I was wrong.
As for Win7, chcp should work without disable_pcon even in
cygwin 3.2.0, because pseudo console is not activated under Win7.
--
Takashi Yano <takashi.yano@nifty.ne.jp>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-30 2:24 ` Andry
2020-12-30 4:02 ` Takashi Yano
@ 2020-12-30 10:13 ` Takashi Yano
2020-12-30 15:07 ` Andry
1 sibling, 1 reply; 19+ messages in thread
From: Takashi Yano @ 2020-12-30 10:13 UTC (permalink / raw)
To: cygwin
On Wed, 30 Dec 2020 05:24:02 +0300
Andry wrote:
> Hello takashi,
>
> >I cannot reproducue your problem even with chcp.com 65001 and
> >start "" cmd.exe ...
> Seems this is a bug specifically for the Windows 7 x64.
I guess the problem is essentially the same with followings.
In Win7,
1) Start command prompt.
2) Run chcp 65001
3) Change the font of command prompt to raster font.
4) Run c:\cygwin\bin\printf "\xce\b1\n"
This causes the error:
/usr/bin/printf: write error
What weird is that if the font is other than raster font,
this error does not occur.
I looked into this problem and found that the following
simple c code does not work in command prompt with chcp
65001 and raster font in Win7.
/* Compile this code using MinGW compiler
and run in cmd.exe */
#include <windows.h>
#include <stdio.h>
int main()
{
wchar_t wstr[] = L"α\r\n";
HANDLE h = GetStdHandle(STD_OUTPUT_HANDLE);
DWORD n;
int ret = WriteConsoleW(h, wstr, wcslen(wstr), &n, NULL);
printf("n=%d, ret=%d, Err=0x%08x\n", n, ret, GetLastError());
return 0;
}
This is also reproducible in legacy console mode of windows10.
The error code is 0x0000001f (ERROR_GEN_FAILURE: A device attached to
the system is not functioning).
Is this possibly a bug of windows?
--
Takashi Yano <takashi.yano@nifty.ne.jp>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Re: tee: 'standard output': Permission denied
2020-12-30 10:13 ` Takashi Yano
@ 2020-12-30 15:07 ` Andry
0 siblings, 0 replies; 19+ messages in thread
From: Andry @ 2020-12-30 15:07 UTC (permalink / raw)
To: cygwin
Hello Cygwin,
>What weird is that if the font is other than raster font, this error does not occur.
Sad, but seems the version of the cygwin is not related to the
issue, it still fails in the cygwin64 3.1.x: `script: write failed: Permission denied`
>Is this possibly a bug of windows?
May be default `Terminal` console font in the Windows 7 does not
have a required character to draw?
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: tee: 'standard output': Permission denied
2020-12-30 2:22 ` Andry
@ 2020-12-30 19:21 ` Brian Inglis
2020-12-31 16:33 ` Andry
0 siblings, 1 reply; 19+ messages in thread
From: Brian Inglis @ 2020-12-30 19:21 UTC (permalink / raw)
To: cygwin
On 2020-12-29 19:22, Andry via Cygwin wrote:
>> Cannot repro... Logfile is created correctly and commands and their
>> output are logged there. The file encoding for the logfile is utf-8.
> The issue found in the Windows 7 x64.
>
>> A couple of things though: 1. changing \ to / does not guarantee a
>> valid Cygwin path.
> Not sure what you talking about. Always worked.
>
>> 2. the cd does nothing because bash -l starts the shell in the home
>> directory.
> I've tested it and it does.
>
>> 3. Once you've started bash, you don't have to supply the full path so
>> "/bin/bash.exe" and "/bin/tee.exe" are fine (assuming your path and mounts
>> are set correctly)
> You have to, because not logged shell does not have PATH registration to the
> `/bin`.
>
>> Are any files on a remote share?
> You cannot run cmd.exe on a remote share.
>
>> Are any of the paths relative?Do any of the paths have spaces in them?
> Does it matter?
Seems to have been reported a few times with Windows Russian and fix suggested
was "chcp 1252" (which might not be too useful for many Russians), as there may
be encoding conversion bugs with UTF-8.
--
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
This email may be disturbing to some readers as it contains
too much technical detail. Reader discretion is advised.
[Data in binary units and prefixes, physical quantities in SI.]
^ permalink raw reply [flat|nested] 19+ messages in thread
* tee: 'standard output': Permission denied
2020-12-30 19:21 ` Brian Inglis
@ 2020-12-31 16:33 ` Andry
0 siblings, 0 replies; 19+ messages in thread
From: Andry @ 2020-12-31 16:33 UTC (permalink / raw)
To: cygwin
Hello Brian,
>Seems to have been reported a few times with Windows Russian and fix suggested
>was "chcp 1252" (which might not be too useful for many Russians), as there may
>be encoding conversion bugs with UTF-8.
Why not just switch a console to TrueType font like Lucida Console
or installed Consolas font from Visual Studio?
You even can install, for example, vectorized raster variant of the
Fixedsys/Terminal font like TerminalVectorized font: http://www.yohng.com/software/terminalvector.html
(Simply click on font, press install button and restart console.
Almost looks like the same Fixedsys, but has a bit different `0`
character)
Or install another not vectorized raster variant, like, Terminus
font: http://terminus-font.sourceforge.net
(not sure how to replace, not found a solution on the internet)
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2020-12-31 16:30 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-27 2:04 tee: 'standard output': Permission denied Andry
2020-12-29 21:50 ` Andry
2020-12-30 1:29 ` Kevin Schnitzius
2020-12-30 2:22 ` Andry
2020-12-30 19:21 ` Brian Inglis
2020-12-31 16:33 ` Andry
2020-12-30 1:31 ` Doug Henderson
2020-12-30 1:45 ` Takashi Yano
2020-12-30 2:24 ` Andry
2020-12-30 4:02 ` Takashi Yano
2020-12-30 4:40 ` Takashi Yano
2020-12-30 4:54 ` Andry
2020-12-30 5:11 ` Andry
2020-12-30 4:49 ` Andry
2020-12-30 5:03 ` Takashi Yano
2020-12-30 5:18 ` Andry
2020-12-30 6:40 ` Takashi Yano
2020-12-30 10:13 ` Takashi Yano
2020-12-30 15:07 ` Andry
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).