* Re: Re: Re: RE: Installing cygwin gcc using sources
@ 2001-07-03 6:34 Deepak Shekhar
2001-07-04 10:56 ` Tim Prince
0 siblings, 1 reply; 2+ messages in thread
From: Deepak Shekhar @ 2001-07-03 6:34 UTC (permalink / raw)
To: tprince; +Cc: cygwin
thanks for the information on "make bootstrap".
But i tried "make bootstrap" after the configure but still it gives an error at the same point.
Can u tell me the sequence odf commands i need to give??
Is the following sequence correct??
1)$../binutils-20010425-2/configure --enable-languages='c' --prefix=/home/deepak/exe -v
2)$make all (make bootstrap)
3)$make install
4)$../gcc-2.95.3-4/configure --enable-languages='c' --prefix=/home/deepak/exe -v
5)$make all (make bootstrap)
6)$make install
The cygwin on my machine is 6 months old. Do i need to install the latest version and give a try???
------------- Original Message --------------
"Tim Prince" <tprince@computer.org> wrote:
To:"Deepak Shekhar" <dipaktc@rediffmail.com>
From:"Tim Prince" <tprince@computer.org>
Date:Mon, 2 Jul 2001 05:57:38 -0700
Subject: Re: Re: RE: Installing cygwin gcc using sources
No, there isn't any separate documentation for cygwin. The standard gcc
documents apply, although they don't cover the configure flags for
cygwin. Yes, it may be possble to build the same or nearly the same
version without bootstrap, but it's obviously risky. With bootstrap,
you rely only on the old gcc working without optimization, and you allow
gcc to self-configure, subject to the flags you set yourself on
configure. You also get the advantage of the testing to see whether
your new compiler produces the same results when built with and without
optimization.
I assume that your keyword 'all' is ignored and doesn't cause any
problems.
----- Original Message -----
From: "Deepak Shekhar" <dipaktc@rediffmail.com>
To: <tprince@computer.org>
Sent: Monday, July 02, 2001 2:43 AM
Subject: Re: Re: RE: Installing cygwin gcc using sources
>
> can u tell more about what "make bootstrap" does.
> I am not installing the entire cygwin from sources, but only "GCC".
> Can u refer to me any document,if available, on installing "GCC" using
sources on cygwin.
>
> I tried to install "GCC" from sources on linux platform and it works
fine without "make bootstrap".
> The packages I used on linux are binutils-2.10 and gcc-2.95.2.
>
> ------------- Original Message --------------
> "Tim Prince" <tprince@computer.org> wrote:
> To:<bmj2001@bellsouth.net>, "deepak shekhar" <dipaktc@rediffmail.com>
> From:"Tim Prince" <tprince@computer.org>
> Date:Sat, 30 Jun 2001 08:40:18 -0700
> CC:<cygwin@cygwin.com>
> Subject: Re: RE: Installing cygwin gcc using sources
>
> Why are you skipping "make bootstrap" ? I don't know whether the
> configure flags used to build cygwin are documented, but I usually
>
use --with-included-gettext --enable-sjlj-exceptions --enable-languages=
> 'c++,f77'. David Billinghurst has been able to build objc and gcov as
> well.
> ----- Original Message -----
> From: "deepak shekhar" <dipaktc@rediffmail.com>
> To: <bmj2001@bellsouth.net>
> Cc: <cygwin@cygwin.com>
> Sent: Saturday, June 30, 2001 4:23 AM
> Subject: Re: RE: Installing cygwin gcc using sources
>
>
> >
> > Hi!
> > yes i did try configure.
> > First i run "configure" for binutils and did "make all" and "make
> install".The uitlities in the binutils get installed .Then i tried
> "configure" of gcc in the same path. The configure is fine. But when i
> do a "make all" it throws an error message.
> >
> > Is it necessary that i have install new version of cygwin.I
installed
> cygwin some 6 months back.
> >
> > thanks for responding.
> > deepak
> >
> > ------------- Original Message --------------
> > "Robert McNulty Junior" <bmj2001@bellsouth.net> wrote:
> > To:"deepak shekhar" <dipaktc@rediffmail.com>,
> > <cygwin@cygwin.com>
> > From:"Robert McNulty Junior" <bmj2001@bellsouth.net>
> > Date:Sat, 30 Jun 2001 05:16:52 -0500
> > Subject: RE: Installing cygwin gcc using sources
> >
> > Did you try configure?
> >
> > -----Original Message-----
> > From: cygwin-owner@sources.redhat.com
> > [ mailto:cygwin-owner@sources.redhat.com]On Behalf Of deepak shekhar
> > Sent: Saturday, June 30, 2001 2:49 AM
> > To: cygwin@cygwin.com
> > Subject: Installing cygwin gcc using sources
> >
> > Hi! there
> >
> > I have installed the cygwin on my i586-pc having windows using the
> binaries
> > and the "setup.exe" program.
> > Now i am trying to install binutils and gcc using the sources.
> > My directory structure is like this
> > /home/deepak/sources - this is the directory containing the sources
> for
> > binuitls and gcc.
> > /home/deepak/build - object directory where i'll run configure and
> make.
> > /home/deepak/exe - install directory.
> >
> > The versions of binutils is binutils-20010425-2-src.tar-gz and of
gcc
> is
> > gcc-2.95.3-4-src.tar.gz.
> >
> > I have untared these packages in the sources directory.
> >
> > In the build directory i run the configure for binutils by giving
the
> > following command.
> > $cd build
> >
$../sources/binutils-20010425-2/configure --prefix=/home/deepak/exe -v
> > Then i do a make.
> > $make all && make install
> > The utilities in the binutils get installed.(including the as.exe
and
> > ld.exe).
> > Now i run configure for the gcc by the following command.
> >
> > $../sources/gcc-2.95.3-4/configure --prefix=/home/deepak/exe -v
> >
> > The configure is fine.
> > Now if do a make by givin
>
> ____________________________________________________
> Buy Feng Shui Package for Rs. 151/- only, at
http://shopping.rediff.com/shopping/fengshui_mailer.htm
>
>
>
____________________________________________________
Buy Feng Shui Package for Rs. 151/- only, at http://shopping.rediff.com/shopping/fengshui_mailer.htm
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Re: Re: RE: Installing cygwin gcc using sources
2001-07-03 6:34 Re: Re: RE: Installing cygwin gcc using sources Deepak Shekhar
@ 2001-07-04 10:56 ` Tim Prince
0 siblings, 0 replies; 2+ messages in thread
From: Tim Prince @ 2001-07-04 10:56 UTC (permalink / raw)
To: Deepak Shekhar; +Cc: cygwin
You certainly need bring your cygwin installation current, both with the binaries and the source you are building.
----- Original Message -----
From: "Deepak Shekhar" <dipaktc@rediffmail.com>
To: <tprince@computer.org>
Cc: <cygwin@cygwin.com>
Sent: Tuesday, July 03, 2001 6:38 AM
Subject: Re: Re: Re: RE: Installing cygwin gcc using sources
> thanks for the information on "make bootstrap".
> But i tried "make bootstrap" after the configure but still it gives an error at the same point.
> Can u tell me the sequence odf commands i need to give??
> Is the following sequence correct??
>
> 1)$../binutils-20010425-2/configure --enable-languages='c' --prefix=/home/deepak/exe -v
> 2)$make all (make bootstrap)
> 3)$make install
> 4)$../gcc-2.95.3-4/configure --enable-languages='c' --prefix=/home/deepak/exe -v
> 5)$make all (make bootstrap)
> 6)$make install
>
> The cygwin on my machine is 6 months old. Do i need to install the latest version and give a try???
>
>
> ------------- Original Message --------------
> "Tim Prince" <tprince@computer.org> wrote:
> To:"Deepak Shekhar" <dipaktc@rediffmail.com>
> From:"Tim Prince" <tprince@computer.org>
> Date:Mon, 2 Jul 2001 05:57:38 -0700
> Subject: Re: Re: RE: Installing cygwin gcc using sources
>
> No, there isn't any separate documentation for cygwin. The standard gcc
> documents apply, although they don't cover the configure flags for
> cygwin. Yes, it may be possble to build the same or nearly the same
> version without bootstrap, but it's obviously risky. With bootstrap,
> you rely only on the old gcc working without optimization, and you allow
> gcc to self-configure, subject to the flags you set yourself on
> configure. You also get the advantage of the testing to see whether
> your new compiler produces the same results when built with and without
> optimization.
>
> I assume that your keyword 'all' is ignored and doesn't cause any
> problems.
> ----- Original Message -----
> From: "Deepak Shekhar" <dipaktc@rediffmail.com>
> To: <tprince@computer.org>
> Sent: Monday, July 02, 2001 2:43 AM
> Subject: Re: Re: RE: Installing cygwin gcc using sources
>
>
> >
> > can u tell more about what "make bootstrap" does.
> > I am not installing the entire cygwin from sources, but only "GCC".
> > Can u refer to me any document,if available, on installing "GCC" using
> sources on cygwin.
> >
> > I tried to install "GCC" from sources on linux platform and it works
> fine without "make bootstrap".
> > The packages I used on linux are binutils-2.10 and gcc-2.95.2.
> >
> > ------------- Original Message --------------
> > "Tim Prince" <tprince@computer.org> wrote:
> > To:<bmj2001@bellsouth.net>, "deepak shekhar" <dipaktc@rediffmail.com>
> > From:"Tim Prince" <tprince@computer.org>
> > Date:Sat, 30 Jun 2001 08:40:18 -0700
> > CC:<cygwin@cygwin.com>
> > Subject: Re: RE: Installing cygwin gcc using sources
> >
> > Why are you skipping "make bootstrap" ? I don't know whether the
> > configure flags used to build cygwin are documented, but I usually
> >
> use --with-included-gettext --enable-sjlj-exceptions --enable-languages=
> > 'c++,f77'. David Billinghurst has been able to build objc and gcov as
> > well.
> > ----- Original Message -----
> > From: "deepak shekhar" <dipaktc@rediffmail.com>
> > To: <bmj2001@bellsouth.net>
> > Cc: <cygwin@cygwin.com>
> > Sent: Saturday, June 30, 2001 4:23 AM
> > Subject: Re: RE: Installing cygwin gcc using sources
> >
> >
> > >
> > > Hi!
> > > yes i did try configure.
> > > First i run "configure" for binutils and did "make all" and "make
> > install".The uitlities in the binutils get installed .Then i tried
> > "configure" of gcc in the same path. The configure is fine. But when i
> > do a "make all" it throws an error message.
> > >
> > > Is it necessary that i have install new version of cygwin.I
> installed
> > cygwin some 6 months back.
> > >
> > > thanks for responding.
> > > deepak
> > >
> > > ------------- Original Message --------------
> > > "Robert McNulty Junior" <bmj2001@bellsouth.net> wrote:
> > > To:"deepak shekhar" <dipaktc@rediffmail.com>,
> > > <cygwin@cygwin.com>
> > > From:"Robert McNulty Junior" <bmj2001@bellsouth.net>
> > > Date:Sat, 30 Jun 2001 05:16:52 -0500
> > > Subject: RE: Installing cygwin gcc using sources
> > >
> > > Did you try configure?
> > >
> > > -----Original Message-----
> > > From: cygwin-owner@sources.redhat.com
> > > [ mailto:cygwin-owner@sources.redhat.com]On Behalf Of deepak shekhar
> > > Sent: Saturday, June 30, 2001 2:49 AM
> > > To: cygwin@cygwin.com
> > > Subject: Installing cygwin gcc using sources
> > >
> > > Hi! there
> > >
> > > I have installed the cygwin on my i586-pc having windows using the
> > binaries
> > > and the "setup.exe" program.
> > > Now i am trying to install binutils and gcc using the sources.
> > > My directory structure is like this
> > > /home/deepak/sources - this is the directory containing the sources
> > for
> > > binuitls and gcc.
> > > /home/deepak/build - object directory where i'll run configure and
> > make.
> > > /home/deepak/exe - install directory.
> > >
> > > The versions of binutils is binutils-20010425-2-src.tar-gz and of
> gcc
> > is
> > > gcc-2.95.3-4-src.tar.gz.
> > >
> > > I have untared these packages in the sources directory.
> > >
> > > In the build directory i run the configure for binutils by giving
> the
> > > following command.
> > > $cd build
> > >
> $../sources/binutils-20010425-2/configure --prefix=/home/deepak/exe -v
> > > Then i do a make.
> > > $make all && make install
> > > The utilities in the binutils get installed.(including the as.exe
> and
> > > ld.exe).
> > > Now i run configure for the gcc by the following command.
> > >
> > > $../sources/gcc-2.95.3-4/configure --prefix=/home/deepak/exe -v
> > >
> > > The configure is fine.
> > > Now if do a make by givin
> >
> > ____________________________________________________
> > Buy Feng Shui Package for Rs. 151/- only, at
> http://shopping.rediff.com/shopping/fengshui_mailer.htm
> >
> >
> >
>
>
> ____________________________________________________
> Buy Feng Shui Package for Rs. 151/- only, at http://shopping.rediff.com/shopping/fengshui_mailer.htm
>
>
>
>
> --
> Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
> Bug reporting: http://cygwin.com/bugs.html
> Documentation: http://cygwin.com/docs.html
> FAQ: http://cygwin.com/faq/
>
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-07-04 10:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-07-03 6:34 Re: Re: RE: Installing cygwin gcc using sources Deepak Shekhar
2001-07-04 10:56 ` Tim Prince
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).