* Win 7 claims setup-x86_64.exe doesn't work any more - but it does
@ 2013-11-28 9:24 Robert Klemme
2013-11-28 13:09 ` Corinna Vinschen
0 siblings, 1 reply; 6+ messages in thread
From: Robert Klemme @ 2013-11-28 9:24 UTC (permalink / raw)
To: cygwin
Folks,
since the last update of my cygwin 64 installer during the execution I
get a Windows pop up indicating that the program does not work any
more. Funny thing is: it does. I just click "cancel" and the
installation proceeds normally. It even happens if I start the
program and click cancel on the first screen. Is anybody else
experiencing the same? Version is 2.831.
Kind regards
robert
--
remember.guy do |as, often| as.you_can - without end
http://blog.rubybestpractices.com/
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Win 7 claims setup-x86_64.exe doesn't work any more - but it does
2013-11-28 9:24 Win 7 claims setup-x86_64.exe doesn't work any more - but it does Robert Klemme
@ 2013-11-28 13:09 ` Corinna Vinschen
2013-11-28 15:52 ` Robert Klemme
2013-11-29 5:46 ` Niklaas Baudet von Gersdorff
0 siblings, 2 replies; 6+ messages in thread
From: Corinna Vinschen @ 2013-11-28 13:09 UTC (permalink / raw)
To: cygwin
[-- Attachment #1: Type: text/plain, Size: 706 bytes --]
On Nov 28 10:24, Robert Klemme wrote:
> Folks,
>
> since the last update of my cygwin 64 installer during the execution I
> get a Windows pop up indicating that the program does not work any
> more. Funny thing is: it does. I just click "cancel" and the
> installation proceeds normally. It even happens if I start the
> program and click cancel on the first screen. Is anybody else
> experiencing the same? Version is 2.831.
Just tried it on a W7-64 machine and I can't reproduce this. Maybe
a virus scanner is interfering?
Corinna
--
Corinna Vinschen Please, send mails regarding Cygwin to
Cygwin Maintainer cygwin AT cygwin DOT com
Red Hat
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Win 7 claims setup-x86_64.exe doesn't work any more - but it does
2013-11-28 13:09 ` Corinna Vinschen
@ 2013-11-28 15:52 ` Robert Klemme
2013-11-28 16:32 ` Christopher Faylor
2013-11-29 5:46 ` Niklaas Baudet von Gersdorff
1 sibling, 1 reply; 6+ messages in thread
From: Robert Klemme @ 2013-11-28 15:52 UTC (permalink / raw)
To: cygwin
[-- Attachment #1: Type: text/plain, Size: 1334 bytes --]
Hi Corinna,
On Thu, Nov 28, 2013 at 2:09 PM, Corinna Vinschen wrote:
> On Nov 28 10:24, Robert Klemme wrote:
>> since the last update of my cygwin 64 installer during the execution I
>> get a Windows pop up indicating that the program does not work any
>> more. Funny thing is: it does. I just click "cancel" and the
>> installation proceeds normally. It even happens if I start the
>> program and click cancel on the first screen. Is anybody else
>> experiencing the same? Version is 2.831.
>
> Just tried it on a W7-64 machine and I can't reproduce this. Maybe
> a virus scanner is interfering?
I just tested with the AV switched off and there is no difference.
Also, it has worked without issues in the past with AV.
The only change to the system was that I uninstalled Notepad++
yesterday. Before I did that I uninstalled all the plugins and all of
a sudden my "Desktop" directory was gone. I do not have an idea
whether this is in any way related and I don't want to blame Notepad++
unless I have evidence of any issues caused by it. So far I could not
find anything unusual.
I checked Windows Application Log and there seems to be always an
error like the one attached whenever the UI reports issues.
Kind regards
robert
--
remember.guy do |as, often| as.you_can - without end
http://blog.rubybestpractices.com/
[-- Attachment #2: setup-error.txt --]
[-- Type: text/plain, Size: 1703 bytes --]
Protokollname: Application
Quelle: Application Error
Datum: 28.11.2013 14:50:45
Ereignis-ID: 1000
Aufgabenkategorie:(100)
Ebene: Fehler
Schlüsselwörter:Klassisch
Benutzer: Nicht zutreffend
Computer: arnie
Beschreibung:
Name der fehlerhaften Anwendung: setup-x86_64.exe, Version: 0.0.0.0, Zeitstempel: 0x5288542b
Name des fehlerhaften Moduls: nvinitx.dll_unloaded, Version: 0.0.0.0, Zeitstempel: 0x50ef1ca0
Ausnahmecode: 0xc0000005
Fehleroffset: 0x000007fefd9b01e8
ID des fehlerhaften Prozesses: 0xf34
Startzeit der fehlerhaften Anwendung: 0x01ceec40d162a465
Pfad der fehlerhaften Anwendung: C:\Users\*******\Downloads\setup-x86_64.exe
Pfad des fehlerhaften Moduls: nvinitx.dll
Berichtskennung: 13c4eb73-5834-11e3-bd57-d2585892fffd
Ereignis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T13:50:45.000000000Z" />
<EventRecordID>48834</EventRecordID>
<Channel>Application</Channel>
<Computer>arnie</Computer>
<Security />
</System>
<EventData>
<Data>setup-x86_64.exe</Data>
<Data>0.0.0.0</Data>
<Data>5288542b</Data>
<Data>nvinitx.dll_unloaded</Data>
<Data>0.0.0.0</Data>
<Data>50ef1ca0</Data>
<Data>c0000005</Data>
<Data>000007fefd9b01e8</Data>
<Data>f34</Data>
<Data>01ceec40d162a465</Data>
<Data>C:\Users\*******\Downloads\setup-x86_64.exe</Data>
<Data>nvinitx.dll</Data>
<Data>13c4eb73-5834-11e3-bd57-d2585892fffd</Data>
</EventData>
</Event>
[-- Attachment #3: Type: text/plain, Size: 218 bytes --]
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Win 7 claims setup-x86_64.exe doesn't work any more - but it does
2013-11-28 15:52 ` Robert Klemme
@ 2013-11-28 16:32 ` Christopher Faylor
0 siblings, 0 replies; 6+ messages in thread
From: Christopher Faylor @ 2013-11-28 16:32 UTC (permalink / raw)
To: cygwin
On Thu, Nov 28, 2013 at 04:51:57PM +0100, Robert Klemme wrote:
>Hi Corinna,
>
>On Thu, Nov 28, 2013 at 2:09 PM, Corinna Vinschen wrote:
>> On Nov 28 10:24, Robert Klemme wrote:
>
>>> since the last update of my cygwin 64 installer during the execution I
>>> get a Windows pop up indicating that the program does not work any
>>> more. Funny thing is: it does. I just click "cancel" and the
>>> installation proceeds normally. It even happens if I start the
>>> program and click cancel on the first screen. Is anybody else
>>> experiencing the same? Version is 2.831.
>>
>> Just tried it on a W7-64 machine and I can't reproduce this. Maybe
>> a virus scanner is interfering?
>
>I just tested with the AV switched off and there is no difference.
>Also, it has worked without issues in the past with AV.
>
>The only change to the system was that I uninstalled Notepad++
>yesterday. Before I did that I uninstalled all the plugins and all of
>a sudden my "Desktop" directory was gone. I do not have an idea
>whether this is in any way related and I don't want to blame Notepad++
>unless I have evidence of any issues caused by it. So far I could not
>find anything unusual.
>
>I checked Windows Application Log and there seems to be always an
>error like the one attached whenever the UI reports issues.
>
>Kind regards
>
>robert
>
>
>--
>remember.guy do |as, often| as.you_can - without end
>http://blog.rubybestpractices.com/
>Protokollname: Application
>Quelle: Application Error
>Datum: 28.11.2013 14:50:45
>Ereignis-ID: 1000
>Aufgabenkategorie:(100)
>Ebene: Fehler
>Schl??sselw??rter:Klassisch
>Benutzer: Nicht zutreffend
>Computer: arnie
>Beschreibung:
>Name der fehlerhaften Anwendung: setup-x86_64.exe, Version: 0.0.0.0, Zeitstempel: 0x5288542b
>Name des fehlerhaften Moduls: nvinitx.dll_unloaded, Version: 0.0.0.0, Zeitstempel: 0x50ef1ca0
^^^^^^^^^^^^^^^^^^^^
Looks like it might be an NVIDIA DLL which is causing the problem.
cgf
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Win 7 claims setup-x86_64.exe doesn't work any more - but it does
2013-11-28 13:09 ` Corinna Vinschen
2013-11-28 15:52 ` Robert Klemme
@ 2013-11-29 5:46 ` Niklaas Baudet von Gersdorff
2013-11-29 14:34 ` Christopher Faylor
1 sibling, 1 reply; 6+ messages in thread
From: Niklaas Baudet von Gersdorff @ 2013-11-29 5:46 UTC (permalink / raw)
To: cygwin
Hi,
Corinna Vinschen [2013-11-28 14:09 +0100] :
>On Nov 28 10:24, Robert Klemme wrote:
>
>> since the last update of my cygwin 64 installer during the execution
>> I get a Windows pop up indicating that the program does not work
>> any more. Funny thing is: it does. I just click "cancel" and the
>> installation proceeds normally. It even happens if I start the
>> program and click cancel on the first screen. Is anybody else
>> experiencing the same? Version is 2.831.
>
>Just tried it on a W7-64 machine and I can't reproduce this. Maybe a
>virus scanner is interfering?
I just want to mention that I can reproduce this behaviour using the x86
setup.exe . Starting the setup.exe blaims the program does not work any
more. But I can close this dialog and continue installing cygwin
packages without any problems.
I didn't change my system at all, just installed the new version of
cygwin's setup.exe . If you tell me how, I'd debug this.
Cheers
Niklaas
--
Niklaas Baudet von Gersdorff
niklaas@kulturflatrate.net
http://www.kulturflatrate.net/niklaas
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Win 7 claims setup-x86_64.exe doesn't work any more - but it does
2013-11-29 5:46 ` Niklaas Baudet von Gersdorff
@ 2013-11-29 14:34 ` Christopher Faylor
0 siblings, 0 replies; 6+ messages in thread
From: Christopher Faylor @ 2013-11-29 14:34 UTC (permalink / raw)
To: cygwin
On Fri, Nov 29, 2013 at 06:48:07AM +0100, Niklaas Baudet von Gersdorff wrote:
>Corinna Vinschen [2013-11-28 14:09 +0100] :
>
>>On Nov 28 10:24, Robert Klemme wrote:
>>
>>> since the last update of my cygwin 64 installer during the execution
>>> I get a Windows pop up indicating that the program does not work
>>> any more. Funny thing is: it does. I just click "cancel" and the
>>> installation proceeds normally. It even happens if I start the
>>> program and click cancel on the first screen. Is anybody else
>>> experiencing the same? Version is 2.831.
>>
>>Just tried it on a W7-64 machine and I can't reproduce this. Maybe a
>>virus scanner is interfering?
>
>I just want to mention that I can reproduce this behaviour using the x86
>setup.exe . Starting the setup.exe blaims the program does not work any
>more. But I can close this dialog and continue installing cygwin
>packages without any problems.
>
>I didn't change my system at all, just installed the new version of
>cygwin's setup.exe . If you tell me how, I'd debug this.
http://cygwin.com/ml/cygwin/2013-11/msg00457.html
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-11-29 14:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-28 9:24 Win 7 claims setup-x86_64.exe doesn't work any more - but it does Robert Klemme
2013-11-28 13:09 ` Corinna Vinschen
2013-11-28 15:52 ` Robert Klemme
2013-11-28 16:32 ` Christopher Faylor
2013-11-29 5:46 ` Niklaas Baudet von Gersdorff
2013-11-29 14:34 ` Christopher Faylor
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).