* Urgent: Issue with s300 recevier in command prompt
@ 2020-02-12 21:50 kwaldrop
2020-02-12 21:51 ` cygwinautoreply
0 siblings, 1 reply; 2+ messages in thread
From: kwaldrop @ 2020-02-12 21:50 UTC (permalink / raw)
To: cygwin
Hi,
.This is Kevin with Pathway Communications I have made changes to ther
receiver as instructed and am not able to gain any channels now.
Please when able call to help assist. 8179176872
Below is the error received when applying to command Prompt:
Microsoft Windows [Version 10.0.18362.592]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\Users\kwald>ping 192.168.0.11
Pinging 192.168.0.11 with 32 bytes of data:
Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.11:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\kwald>cd \cmcs
C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -save oldconfig
1 [main] cmcs300 3148 find_fast_cwd: WARNING: Couldn't compute
FAST_CWD pointer. Please report this problem to
the public mailing list cygwin@cygwin.com
Configuration saved to oldconfig.
C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -sym 9.844 -rfreq
1021.85 -modcod "4/5 QPSK"
2 [main] cmcs300 6252 find_fast_cwd: WARNING: Couldn't compute
FAST_CWD pointer. Please report this problem to
the public mailing list cygwin@cygwin.com
Symbol rate set.
Receive frequency set.
MODCOD changed successfully.
C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -shsat
2 [main] cmcs300 9392 find_fast_cwd: WARNING: Couldn't compute
FAST_CWD pointer. Please report this problem to
the public mailing list cygwin@cygwin.com
Satellite Interface Settings:
Receiver MAC Address: 00-06-76-05-27-cf
Receiver Mode: DVBS2
Frequency: 1021.8 MHz
Symbol Rate: 9.844 Msps
ModCod: 4/5 QPSK
Gold code: 0
Input Stream Filter: Off
Input Stream ID: 0
Signal Lock: On
Data Lock: On
Uncorrectable Rate: 0/Second
Packet Error Rate: 0.0000e+00
Carrier to Noise C/N: 14.7dB
Signal Strength: -41 dBm
C:\cmcs>
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Urgent: Issue with s300 recevier in command prompt
2020-02-12 21:50 Urgent: Issue with s300 recevier in command prompt kwaldrop
@ 2020-02-12 21:51 ` cygwinautoreply
0 siblings, 0 replies; 2+ messages in thread
From: cygwinautoreply @ 2020-02-12 21:51 UTC (permalink / raw)
To: kwaldrop; +Cc: cygwin
>Hi,
>.This is Kevin with Pathway Communications I have made changes to ther
>receiver as instructed and am not able to gain any channels now.
>Please when able call to help assist. 8179176872
>Below is the error received when applying to command Prompt:
>Microsoft Windows [Version 10.0.18362.592]
>(c) 2019 Microsoft Corporation. All rights reserved.
>C:\Users\kwald>ping 192.168.0.11
>Pinging 192.168.0.11 with 32 bytes of data:
>Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
>Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
>Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
>Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
>Ping statistics for 192.168.0.11:
> Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
>Approximate round trip times in milli-seconds:
> Minimum = 0ms, Maximum = 0ms, Average = 0ms
>C:\Users\kwald>cd \cmcs
>C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -save oldconfig
> 1 [main] cmcs300 3148 find_fast_cwd: WARNING: Couldn't compute
>FAST_CWD pointer. Please report this problem to
>the public mailing list cygwin@cygwin.com
>Configuration saved to oldconfig.
>C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -sym 9.844 -rfreq
>1021.85 -modcod "4/5 QPSK"
> 2 [main] cmcs300 6252 find_fast_cwd: WARNING: Couldn't compute
>FAST_CWD pointer. Please report this problem to
>the public mailing list cygwin@cygwin.com
>Symbol rate set.
>Receive frequency set.
>MODCOD changed successfully.
>C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -shsat
> 2 [main] cmcs300 9392 find_fast_cwd: WARNING: Couldn't compute
>FAST_CWD pointer. Please report this problem to
>the public mailing list cygwin@cygwin.com
> Satellite Interface Settings:
> Receiver MAC Address: 00-06-76-05-27-cf
> Receiver Mode: DVBS2
> Frequency: 1021.8 MHz
> Symbol Rate: 9.844 Msps
> ModCod: 4/5 QPSK
> Gold code: 0
> Input Stream Filter: Off
> Input Stream ID: 0
> Signal Lock: On
> Data Lock: On
> Uncorrectable Rate: 0/Second
> Packet Error Rate: 0.0000e+00
> Carrier to Noise C/N: 14.7dB
> Signal Strength: -41 dBm
>C:\cmcs>
https://cygwin.com/faq.html#faq.using.fixing-find_fast_cwd-warnings
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-12 21:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-12 21:50 Urgent: Issue with s300 recevier in command prompt kwaldrop
2020-02-12 21:51 ` cygwinautoreply
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).