* EPCS replaced by EPCQ Error (with Cyclone III FPGA)
@ 2021-08-27 4:49 Ekta Unity
2021-08-27 5:01 ` cygwinautoreply
0 siblings, 1 reply; 2+ messages in thread
From: Ekta Unity @ 2021-08-27 4:49 UTC (permalink / raw)
To: cygwin
Dear Sir,
In one of our old project cards, we were using *Cyclone III FPGA* along
with *EPCS64SI16N *memory. Recently same card was manufactured but
as EPCS64SI16N is obsolete now, we used equivalent recommended MPN
*EPCQ64ASI16N*.
*Quartus 11* was used to compile the FPGA project; as it doesn't support
EPCQ, we generated new project in *Quartus 13*. SOPC file for NIOS also got
upgraded to QSYS version.
In Eclipse, one error is thrown as shown in image -* "Couldn't compute
FAST_CWD pointer. Please report this problem to public mailing
list cygwin@cygwin.com <cygwin@cygwin.com>."*
Also, while writing SOF file to EPCQ it throws error as shown in attached
image- *"No EPCS layout data - looking for section(EPCS-EF4017); Unable to
use EPCS device; Error code 8."*
Also, .pof and .rbf files were generated by selecting EPCQ64 memory,
however, it resulted into the same error.
*Kindly help us to resolve these errors as we have to urgently program
firmware in these cards.*
Best Regards,
Ekta Rawat
Deputy Manager
BEL Ghaziabad
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: EPCS replaced by EPCQ Error (with Cyclone III FPGA)
2021-08-27 4:49 EPCS replaced by EPCQ Error (with Cyclone III FPGA) Ekta Unity
@ 2021-08-27 5:01 ` cygwinautoreply
0 siblings, 0 replies; 2+ messages in thread
From: cygwinautoreply @ 2021-08-27 5:01 UTC (permalink / raw)
To: ekta25rawat; +Cc: cygwin
>Dear Sir,
>In one of our old project cards, we were using *Cyclone III FPGA* along
>with *EPCS64SI16N *memory. Recently same card was manufactured but
>as EPCS64SI16N is obsolete now, we used equivalent recommended MPN
>*EPCQ64ASI16N*.
>*Quartus 11* was used to compile the FPGA project; as it doesn't support
>EPCQ, we generated new project in *Quartus 13*. SOPC file for NIOS also got
>upgraded to QSYS version.
>In Eclipse, one error is thrown as shown in image -* "Couldn't compute
>FAST_CWD pointer. Please report this problem to public mailing
>list cygwin@cygwin.com <cygwin@cygwin.com>."*
>Also, while writing SOF file to EPCQ it throws error as shown in attached
>image- *"No EPCS layout data - looking for section(EPCS-EF4017); Unable to
>use EPCS device; Error code 8."*
>Also, .pof and .rbf files were generated by selecting EPCQ64 memory,
>however, it resulted into the same error.
>*Kindly help us to resolve these errors as we have to urgently program
>firmware in these cards.*
>Best Regards,
>Ekta Rawat
>Deputy Manager
>BEL Ghaziabad
https://cygwin.com/faq.html#faq.using.fixing-find_fast_cwd-warnings
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-08-27 5:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-27 4:49 EPCS replaced by EPCQ Error (with Cyclone III FPGA) Ekta Unity
2021-08-27 5:01 ` cygwinautoreply
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).