* windows netsh/route output translated to English in mintty
@ 2022-04-07 8:38 Ilya Basin
2022-04-07 9:35 ` Takashi Yano
2022-04-19 18:20 ` Andrey Repin
0 siblings, 2 replies; 4+ messages in thread
From: Ilya Basin @ 2022-04-07 8:38 UTC (permalink / raw)
To: cygwin
Hi. One of my PCs still has Windows 7 and I noticed that when I run
netsh interface ipv4 show route
or
route print
In Mintty, the output is translated to English and when I run these commands from Cygwin started in a Windows console the output is in the same language as the OS. Does Cygwin do that?
Secondly, it doesn't seem to be affected by TERM= LC_ALL= , redirections or even setsid.
And I also noticed that when the "Interface List" section of "route print" is translated to English the national interface names containing "Microsoft ISATAP" are omitted completely, including the newlines so the output looks like this:
...
1...........................Software Loopback Interface 1
12...00 00 00 00 00 00 00 e0 14...00 00 00 00 00 00 00 e0 16...00 00 00 00 00 00 00 e0 18...00 00 00 00 00 00 00 e0 20...00 00 00 00 00 00 00 e0 26...00 00 00 00 00 00 00 e0 ===========================================================================
IPv4 Route Table
...
Does anybody know the reason?
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: windows netsh/route output translated to English in mintty
2022-04-07 8:38 windows netsh/route output translated to English in mintty Ilya Basin
@ 2022-04-07 9:35 ` Takashi Yano
2022-04-07 16:29 ` Brian Inglis
2022-04-19 18:20 ` Andrey Repin
1 sibling, 1 reply; 4+ messages in thread
From: Takashi Yano @ 2022-04-07 9:35 UTC (permalink / raw)
To: cygwin; +Cc: Ilya Basin
On Thu, 7 Apr 2022 11:38:28 +0300
Ilya Basin wrote:
> Hi. One of my PCs still has Windows 7 and I noticed that when I run
> netsh interface ipv4 show route
> or
> route print
>
> In Mintty, the output is translated to English and when I run these commands from Cygwin started in a Windows console the output is in the same language as the OS. Does Cygwin do that?
>
> Secondly, it doesn't seem to be affected by TERM= LC_ALL= , redirections or even setsid.
>
> And I also noticed that when the "Interface List" section of "route print" is translated to English the national interface names containing "Microsoft ISATAP" are omitted completely, including the newlines so the output looks like this:
>
> ...
> 1...........................Software Loopback Interface 1
> 12...00 00 00 00 00 00 00 e0 14...00 00 00 00 00 00 00 e0 16...00 00 00 00 00 00 00 e0 18...00 00 00 00 00 00 00 e0 20...00 00 00 00 00 00 00 e0 26...00 00 00 00 00 00 00 e0 ===========================================================================
>
> IPv4 Route Table
> ...
>
> Does anybody know the reason?
That's because code page is set to CP_UTF8 (65001) by default
in pty without pseudo console support for a certain reason.
https://cygwin.com/pipermail/cygwin-developers/2020-August/011951.html
You can change the code page by
chcp.com <code page>
Windows program does not reffer to TERM, LC_ALL, etc. but code page.
--
Takashi Yano <takashi.yano@nifty.ne.jp>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: windows netsh/route output translated to English in mintty
2022-04-07 9:35 ` Takashi Yano
@ 2022-04-07 16:29 ` Brian Inglis
0 siblings, 0 replies; 4+ messages in thread
From: Brian Inglis @ 2022-04-07 16:29 UTC (permalink / raw)
To: cygwin
On 2022-04-07 03:35, Takashi Yano wrote:
> On Thu, 7 Apr 2022 11:38:28 +0300
> Ilya Basin wrote:
>> Hi. One of my PCs still has Windows 7 and I noticed that when I run
>> netsh interface ipv4 show route
>> or
>> route print
>>
>> In Mintty, the output is translated to English and when I run these commands from Cygwin started in a Windows console the output is in the same language as the OS. Does Cygwin do that?
>>
>> Secondly, it doesn't seem to be affected by TERM= LC_ALL= , redirections or even setsid.
>>
>> And I also noticed that when the "Interface List" section of "route print" is translated to English the national interface names containing "Microsoft ISATAP" are omitted completely, including the newlines so the output looks like this:
>>
>> ...
>> 1...........................Software Loopback Interface 1
>> 12...00 00 00 00 00 00 00 e0 14...00 00 00 00 00 00 00 e0 16...00 00 00 00 00 00 00 e0 18...00 00 00 00 00 00 00 e0 20...00 00 00 00 00 00 00 e0 26...00 00 00 00 00 00 00 e0 ===========================================================================
>>
>> IPv4 Route Table
>> ...
>>
>> Does anybody know the reason?
>
> That's because code page is set to CP_UTF8 (65001) by default
> in pty without pseudo console support for a certain reason.
> https://cygwin.com/pipermail/cygwin-developers/2020-August/011951.html
>
> You can change the code page by
> chcp.com <code page>
>
> Windows program does not reffer to TERM, LC_ALL, etc. but code page.
In mintty, see Options/Text/Locale|Character set or .minttyrc entries:
# # Locale ll[l]_CC language_country
Locale=en_CA
# # Character set UTF-8|...
Charset=UTF-8
--
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
This email may be disturbing to some readers as it contains
too much technical detail. Reader discretion is advised.
[Data in binary units and prefixes, physical quantities in SI.]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: windows netsh/route output translated to English in mintty
2022-04-07 8:38 windows netsh/route output translated to English in mintty Ilya Basin
2022-04-07 9:35 ` Takashi Yano
@ 2022-04-19 18:20 ` Andrey Repin
1 sibling, 0 replies; 4+ messages in thread
From: Andrey Repin @ 2022-04-19 18:20 UTC (permalink / raw)
To: Ilya Basin, cygwin
Greetings, Ilya Basin!
> Hi. One of my PCs still has Windows 7 and I noticed that when I run
> netsh interface ipv4 show route
> or
> route print
> In Mintty, the output is translated to English and when I run these
> commands from Cygwin started in a Windows console the output is in the same
> language as the OS. Does Cygwin do that?
No, it is netsh does.
It checks the console codepage and outputs in english if it is not an OEM
CP.
> Secondly, it doesn't seem to be affected by TERM= LC_ALL= , redirections or even setsid.
Right.
> And I also noticed that when the "Interface List" section of "route print"
> is translated to English the national interface names containing "Microsoft
> ISATAP" are omitted completely, including the newlines so the output looks like this:
> ...
> 1...........................Software Loopback Interface 1
> 12...00 00 00 00 00 00 00 e0 14...00 00 00 00 00 00 00 e0 16...00 00
> 00 00 00 00 00 e0 18...00 00 00 00 00 00 00 e0 20...00 00 00 00 00 00 00
> e0 26...00 00 00 00 00 00 00 e0
> ===========================================================================
>
> IPv4 Route Table
> ...
> Does anybody know the reason?
Microsoft stupidity.
--
With best regards,
Andrey Repin
Tuesday, April 19, 2022 21:13:47
Sorry for my terrible english...
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-04-19 18:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-07 8:38 windows netsh/route output translated to English in mintty Ilya Basin
2022-04-07 9:35 ` Takashi Yano
2022-04-07 16:29 ` Brian Inglis
2022-04-19 18:20 ` Andrey Repin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).