setup 2.891release candidate - please test

setup 2.891release candidate - please test

[Jon Turney]

A new setup release candidate is available at:

   https://cygwin.com/setup/setup-2.891.x86_64.exe (64 bit version)
   https://cygwin.com/setup/setup-2.891.x86.exe    (32 bit version)

Please test and report any problems here.

This is not the place for setup feature requests.

Changes compared to 2.889:

- 'Use HTTP/FTP Proxy' connection type now uses the WinINet API

As a consequence, the '--user-agent' option now affects this connection 
type as well

- Remove the 'Direct(legacy)' connection type and associated cruft

There have been no reported problems with it's replacement, the 'Direct' 
connection type, since it's introduction in 2.878
(See https://cygwin.com/ml/cygwin-announce/2017-05/msg00053.html)

If this is the currently configured connection type, it will be silently 
migrated to 'Direct'

- Improve file:// URL handling

All well-formed file URLs should now work.  Malformed file URLs we 
previously accepted should also still work.

Thanks to SZAVAI Gyula for these changes.

- Various fixes for regressions in 'Install from Local Directory' mode
   Addresses: https://cygwin.com/ml/cygwin/2018-03/msg00027.html

Thanks to Ken Brown for these changes.

- Add support for setup-minimum-version: in setup.ini

- Preliminary support for 'provides:' and 'conflicts': in setup.ini

- Add a --version option

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

RE: setup 2.891release candidate - please test

[Robert Cohen]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1381 bytes --]



-----Original Message-----
From: cygwin-owner@cygwin.com [mailto:cygwin-owner@cygwin.com] On Behalf Of Jon Turney
Sent: Thursday, March 15, 2018 19:32
To: The Cygwin Mailing List <cygwin@cygwin.com>
Subject: setup 2.891release candidate - please test


A new setup release candidate is available at:

   https://cygwin.com/setup/setup-2.891.x86_64.exe (64 bit version)
   https://cygwin.com/setup/setup-2.891.x86.exe    (32 bit version)

Please test and report any problems here.
...
-----------------

Hi Jon,

 I tested setup-2.891.x86_64 with an install from local directory, and I got the same
result as setup-2.889-12-g1cf567.x86_64.exe, where it installed the additional packages
that I selected, but at the end it gave this message:

Package: _/libfontconfig-common
	fontconfig_dtd.sh exit code 2

 Do you think this may be because I'm installing from an already-downloaded directory and
It may work ok if I repeat the download and install process using the new setup executable, or
would another solution be needed for this, as alluded to in your earlier reply to this same error
message?

Regards,
 Robert

\0ТÒÐÐ¥\a&ö&ÆVÒ\a&W\x06÷'G3¢\x02\x02\x02\x02\x02\x02\x06‡GG\x03¢òö7–wv–âæ6öÒ÷\a&ö&ÆV×2æ‡FÖÀФd\x15\x13¢\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x06‡GG\x03¢òö7–wv–âæ6öÒöf\x17\x12ðФFö7VÖVçF\x17F–öã¢\x02\x02\x02\x02\x02\x02\x02\x02\x06‡GG\x03¢òö7–wv–âæ6öÒöFö72æ‡FÖÀÐ¥Vç7V'67&–&R\x06–æfó¢\x02\x02\x02\x02\x02\x06‡GG\x03¢òö7–wv–âæ6öÒöÖÂò7Vç7V'67&–&R×6–×\x06ÆPРÐ

Re: setup 2.891release candidate - please test

[Steven Penny]

On Thu, 15 Mar 2018 23:32:15, Jon Turney wrote:
>
> A new setup release candidate is available at:
>
>    https://cygwin.com/setup/setup-2.891.x86_64.exe (64 bit version)
>    https://cygwin.com/setup/setup-2.891.x86.exe    (32 bit version)
>
> Please test and report any problems here.

The packages listed on the "Review and confirm changes" page are still not
alphabetized.

This is a regression because they were before the new dependency library was
added.


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: setup 2.891release candidate - please test

[Houder]

On Thu, 15 Mar 2018 23:32:15, Jon Turney wrote:
> 
> A new setup release candidate is available at:
> 
>    https://cygwin.com/setup/setup-2.891.x86_64.exe (64 bit version)
>    https://cygwin.com/setup/setup-2.891.x86.exe    (32 bit version)
> 
> Please test and report any problems here.

As requested, I carried out some testing ...

>> uname -a
CYGWIN_NT-6.1 Seven 2.10.0(0.325/5/3) 2018-02-02 15:16 x86_64 Cygwin
>> file --version
file-5.30
magic file from /usr/share/misc/magic

>> cd /var/log
>> file setup.log *log-*
setup.log:        ASCII text, with CRLF, CR line terminators <====
setup.log-1.full: ASCII text, with very long lines, with CRLF line terminators
setup.log-2.full: ASCII text, with very long lines, with CRLF line terminators
setup.log-3.full: ASCII text, with very long lines, with CRLF line terminators
setup.log-4.full: ASCII text, with very long lines, with CRLF line terminators
setup.log-5.full: ASCII text, with very long lines, with CRLF line terminators
setup.log-6.full: ASCII text, with very long lines, with CRLF line terminators
setup.log-7.full: ASCII text, with very long lines, with CRLF, CR line terminators <====
setup.log-8.full: ASCII text, with very long lines, with CRLF, CR line terminators <====

>> grep '^M^M' setup.log-8.full
2018/03/18 14:06:50 Problem 1/1
nothing provides liblz4_1 needed by libarchive13-3.3.2-1
Solution 1/1 (default)
  - do not ask to install bsdtar-3.3.2-1
>> # apparently, problem reporting by libsolv causes an additional CR ... why?

Q:

Would it be possible to prevent the additional CR from showing up in the log
file? It is visible when the log file is examined by means of vi(m).

Henri



--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: setup 2.891release candidate - please test

[Jon Turney]

On 16/03/2018 21:52, Robert Cohen wrote:
> -----------------
> 
> Hi Jon,
> 
>   I tested setup-2.891.x86_64 with an install from local directory, and I got the same
> result as setup-2.889-12-g1cf567.x86_64.exe, where it installed the additional packages
> that I selected, but at the end it gave this message:
> 
> Package: _/libfontconfig-common
> 	fontconfig_dtd.sh exit code 2
> 
>   Do you think this may be because I'm installing from an already-downloaded directory and
> It may work ok if I repeat the download and install process using the new setup executable, or
> would another solution be needed for this, as alluded to in your earlier reply to this same error
> message?

Thanks for testing.

Yes, as I wrote in [1], this isn't more a missing feature and/or missing 
dependency information, than a bug in setup.

[1] https://cygwin.com/ml/cygwin/2018-03/msg00108.html

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: setup 2.891release candidate - please test

[Jon Turney]

On 18/03/2018 18:23, Houder wrote:
> 
>>> cd /var/log
>>> file setup.log *log-*
[...]
> 
>>> grep '^M^M' setup.log-8.full
> 2018/03/18 14:06:50 Problem 1/1
> nothing provides liblz4_1 needed by libarchive13-3.3.2-1
> Solution 1/1 (default)
>    - do not ask to install bsdtar-3.3.2-1
>>> # apparently, problem reporting by libsolv causes an additional CR ... why?
> 
> Q:
> 
> Would it be possible to prevent the additional CR from showing up in the log
> file? It is visible when the log file is examined by means of vi(m).

It looks like this is just a bug (we are logging the string after it's 
had the line terminators turned into CRLF for putting into a Windows 
text box, but the logging mechanism expects LF line terminators)

Thanks for testing, and thanks for pointing this out.


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: setup 2.891release candidate - please test

[Robert Cohen]

-----------------------
From: Jon Turney <jon.turney@dronecode.org.uk>
...

Thanks for testing.

Yes, as I wrote in [1], this isn't more a missing feature and/or missing 
dependency information, than a bug in setup.

[1] https://cygwin.com/ml/cygwin/2018-03/msg00108.html
-----------------------

Hi Jon,

 Thanks for clarifying that.  For now, would it make sense for me to manually run /etc/postinstall/fontconfig_dtd.sh, or /etc/postinstall/libxml2.sh, or both after setup is complete, or should I just ignore the error?

    
--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple