* Cygwin X applications do not launch @ 2018-07-27 16:31 Jones, Michael 2018-07-27 17:49 ` Marco Atzeri 0 siblings, 1 reply; 5+ messages in thread From: Jones, Michael @ 2018-07-27 16:31 UTC (permalink / raw) To: cygwin I have a fresh install of Cygwin, with Cygwin X. The problem I have is that X applications do not seem to run. If I try to run gedit or emacs, for example, the applications seem to just return 0 immediately: ---------------------------- me@mycomputer ~ $ gedit & [1] 10244 me@mycomputer ~ $ emacs & [2] 10976 [1] Done gedit ---------------------------- Similarly, if I try to start either of these applications from the X Applications Menu on the taskbar, they don't launch. The Cygwin log file shows the following, indicating that the application started, and then exited straight away: ---------------------------- (xwin-xdg-menu:13896): GVFS-WARNING **: Error creating proxy: Error calling StartServiceByName for org.gtk.vfs.Daemon: Timeout was reached (g-io-error-quark, 24) executing 'xterm -title '/home/me/.xsession-errors' -e less +F /home/me/.xsession-errors', pid 8080 (pid 8080 stderr) xterm: cannot load font "-Misc-Fixed-bold-R-*-*-13-120-75-75-C-120-ISO10646-1" executing 'gapplication launch org.gnome.gedit', pid 9288 pid 9288 exited with status 0 ---------------------------- Any ideas? It's driving me nuts! I've tried a fresh install of Cygwin, with the same results. Many thanks, Mike ________________________________________ Roke Manor Research Limited, Romsey, Hampshire, SO51 0ZN, United Kingdom.Part of the Chemring Group. Registered in England & Wales. Registered No: 00267550 http://www.roke.co.uk Please update your address book. Roke is currently transitioning to its original brand and will no longer be branded under Chemring Technology Solutions. Email addresses of Roke staff have therefore been changed from firstname.surname@chemringts.com to firstname.surname@roke.co.uk – please use this updated format with immediate effect. ________________________________________ The information contained in this e-mail and any attachments is proprietary to Roke Manor Research Limited and must not be passed to any third party without permission. This communication is for information only and shall not create or change any contractual relationship. ________________________________________ -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Cygwin X applications do not launch 2018-07-27 16:31 Cygwin X applications do not launch Jones, Michael @ 2018-07-27 17:49 ` Marco Atzeri [not found] ` <65A79C1241011241A6BF0DE84A2B83F80284285EAA@UM-EXMBX01.comm.ad.roke.co.uk> 0 siblings, 1 reply; 5+ messages in thread From: Marco Atzeri @ 2018-07-27 17:49 UTC (permalink / raw) To: cygwin Am 27.07.2018 um 15:38 schrieb Jones, Michael: > I have a fresh install of Cygwin, with Cygwin X. > The problem I have is that X applications do not seem to run. does xterm run ? > If I try to run gedit or emacs, for example, the applications seem to just return 0 immediately: > ---------------------------- > me@mycomputer ~ > $ gedit & > [1] 10244 if xterm run, can you try strace -o gedit.strace /usr/bin/gedit and see if a there is any pop up error ? Please follow > Problem reports: http://cygwin.com/problems.html and attach the cygcheck.out Rgards Marco --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <65A79C1241011241A6BF0DE84A2B83F80284285EAA@UM-EXMBX01.comm.ad.roke.co.uk>]
* Re: Cygwin X applications do not launch [not found] ` <65A79C1241011241A6BF0DE84A2B83F80284285EAA@UM-EXMBX01.comm.ad.roke.co.uk> @ 2018-07-30 15:11 ` Marco Atzeri [not found] ` <65A79C1241011241A6BF0DE84A2B83F8028428804E@UM-EXMBX01.comm.ad.roke.co.uk> 0 siblings, 1 reply; 5+ messages in thread From: Marco Atzeri @ 2018-07-30 15:11 UTC (permalink / raw) To: Jones, Michael, cygwin Am 30.07.2018 um 10:23 schrieb Jones, Michael: > Yes, xterm, uxterm and Cygwin terminal all run ok. > > I don't see any output at all from "strace -o gedit.strace /usr/bin/gedit": I assume you run it from xterm and not mintty, correct ? Can you send me the gedit.strace by private mail ? > ---------- > me@mycomputer <mailto:me@mycomputer> ~ > $ strace -o gedit.strace /usr/bin/gedit > > me@mycomputer <mailto:me@mycomputer> ~ > $ > ---------- > > I have attached the output from cygcheck (note that I have edited the > file to remove project and server names, replaced by "xxx"). fine. I have not seen anything strange on it. What AntiVirus are you running ? > > Regards, > Mike > --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <65A79C1241011241A6BF0DE84A2B83F8028428804E@UM-EXMBX01.comm.ad.roke.co.uk>]
* Re: Cygwin X applications do not launch [not found] ` <65A79C1241011241A6BF0DE84A2B83F8028428804E@UM-EXMBX01.comm.ad.roke.co.uk> @ 2018-07-30 15:33 ` Marco Atzeri 2018-07-30 16:07 ` Jones, Michael 0 siblings, 1 reply; 5+ messages in thread From: Marco Atzeri @ 2018-07-30 15:33 UTC (permalink / raw) To: Jones, Michael, cygwin Am 30.07.2018 um 12:26 schrieb Jones, Michael: > Hi Marco, > > Attached is the strace output. This was run from xterm. > > My anti virus is Trend Micro OfficeScan. > > Regards, > Mike > Hi Mike, I think the AV is interfering. A lot of Windows DLL's are loaded at very low addresses: --- Process 10964 created --- Process 10964 loaded C:\Windows\System32\ntdll.dll at 0000000077860000 --- Process 10964 loaded C:\Windows\System32\kernel32.dll at 0000000077740000 --- Process 10964 loaded C:\Windows\System32\KernelBase.dll at 000007fefd7e0000 --- Process 10964 loaded C:\Windows\System32\tmumh\20019\AddOn\6.80.0.1007\TmUmEvt64.dll at 000007fefc290 000 --- Process 10964 loaded C:\Windows\System32\psapi.dll at 0000000077a00000 [cut...] --- Process 10964 loaded C:\Windows\System32\rpcrt4.dll at 000007fefdfc0000 --- Process 10964 loaded C:\Windows\System32\tmumh\20019\TmMon\1.6.0.1195\tmmon64.dll at 0000000075070000 --- Process 10964 loaded C:\cygwin64\bin\cygwin1.dll at 0000000180040000 for ntdll.dll for example: 0000000077860000 your system 00007ffd81700000 my system and the exception at the end of strace is in that area 00000000779332ca 160 398012 [main] gedit 10964 sigprocmask: 0 = sigprocmask (0, 0x0, 0x6000A2AA0) --- Process 10964 thread 8560 created --- Process 10964, exception 80000001 at 00000000779332ca --- Process 10964 thread 12024 exited with status 0x80000001 can you try without with AV or excluding the "C:\cygwin64" directory ? Regards Marco --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: Cygwin X applications do not launch 2018-07-30 15:33 ` Marco Atzeri @ 2018-07-30 16:07 ` Jones, Michael 0 siblings, 0 replies; 5+ messages in thread From: Jones, Michael @ 2018-07-30 16:07 UTC (permalink / raw) To: Marco Atzeri, cygwin Hi Marco, You are correct! With AV disabled, everything seems to work fine. I now need to work with our IT guys to figure out how to configure the AV so that it does not interfere. Many thanks for your help diagnosing the cause of this problem! Regards, Mike -----Original Message----- From: Marco Atzeri [mailto:marco.atzeri@gmail.com] Sent: 30 July 2018 11:54 To: Jones, Michael; cygwin@cygwin.com Subject: Re: Cygwin X applications do not launch Am 30.07.2018 um 12:26 schrieb Jones, Michael: > Hi Marco, > > Attached is the strace output. This was run from xterm. > > My anti virus is Trend Micro OfficeScan. > > Regards, > Mike > Hi Mike, I think the AV is interfering. A lot of Windows DLL's are loaded at very low addresses: --- Process 10964 created --- Process 10964 loaded C:\Windows\System32\ntdll.dll at 0000000077860000 --- Process 10964 loaded C:\Windows\System32\kernel32.dll at 0000000077740000 --- Process 10964 loaded C:\Windows\System32\KernelBase.dll at 000007fefd7e0000 --- Process 10964 loaded C:\Windows\System32\tmumh\20019\AddOn\6.80.0.1007\TmUmEvt64.dll at 000007fefc290 000 --- Process 10964 loaded C:\Windows\System32\psapi.dll at 0000000077a00000 [cut...] --- Process 10964 loaded C:\Windows\System32\rpcrt4.dll at 000007fefdfc0000 --- Process 10964 loaded C:\Windows\System32\tmumh\20019\TmMon\1.6.0.1195\tmmon64.dll at 0000000075070000 --- Process 10964 loaded C:\cygwin64\bin\cygwin1.dll at 0000000180040000 for ntdll.dll for example: 0000000077860000 your system 00007ffd81700000 my system and the exception at the end of strace is in that area 00000000779332ca 160 398012 [main] gedit 10964 sigprocmask: 0 = sigprocmask (0, 0x0, 0x6000A2AA0) --- Process 10964 thread 8560 created --- Process 10964, exception 80000001 at 00000000779332ca --- Process 10964 thread 12024 exited with status 0x80000001 can you try without with AV or excluding the "C:\cygwin64" directory ? Regards Marco --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus ________________________________________ Roke Manor Research Limited, Romsey, Hampshire, SO51 0ZN, United Kingdom.Part of the Chemring Group. Registered in England & Wales. Registered No: 00267550 http://www.roke.co.uk Please update your address book. Roke is currently transitioning to its original brand and will no longer be branded under Chemring Technology Solutions. Email addresses of Roke staff have therefore been changed from firstname.surname@chemringts.com to firstname.surname@roke.co.uk – please use this updated format with immediate effect. ________________________________________ The information contained in this e-mail and any attachments is proprietary to Roke Manor Research Limited and must not be passed to any third party without permission. This communication is for information only and shall not create or change any contractual relationship. ________________________________________ -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-07-30 15:11 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-07-27 16:31 Cygwin X applications do not launch Jones, Michael 2018-07-27 17:49 ` Marco Atzeri [not found] ` <65A79C1241011241A6BF0DE84A2B83F80284285EAA@UM-EXMBX01.comm.ad.roke.co.uk> 2018-07-30 15:11 ` Marco Atzeri [not found] ` <65A79C1241011241A6BF0DE84A2B83F8028428804E@UM-EXMBX01.comm.ad.roke.co.uk> 2018-07-30 15:33 ` Marco Atzeri 2018-07-30 16:07 ` Jones, Michael
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).