* [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1 @ 2019-03-02 19:22 Achim Gratz 2019-03-03 6:01 ` Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) Tatsuro MATSUOKA 0 siblings, 1 reply; 12+ messages in thread From: Achim Gratz @ 2019-03-02 19:22 UTC (permalink / raw) To: cygwin Gnuplot version 5.2.6 is available as a release version on Cygwin now. Notes: ------ The configuration has changed to not include "backwards compatibility) any longer, which removes partial support for deprecated features. This build makes use of the new libcerf library package, so gnuplot should be able to use all functionality that depends on it. -- *** CYGWIN-ANNOUNCE UNSUBSCRIBE INFO *** If you want to unsubscribe from the cygwin-announce mailing list, look at the "List-Unsubscribe: " tag in the email header of this message. Send email to the address specified there. It will be in the format: cygwin-announce-unsubscribe-you=yourdomain.com@cygwin.com If you need more information on unsubscribing, start reading here: http://sourceware.org/lists.html#unsubscribe-simple Please read *all* of the information on unsubscribing that is available starting at this URL. -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-02 19:22 [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1 Achim Gratz @ 2019-03-03 6:01 ` Tatsuro MATSUOKA 2019-03-03 18:15 ` Achim Gratz 0 siblings, 1 reply; 12+ messages in thread From: Tatsuro MATSUOKA @ 2019-03-03 6:01 UTC (permalink / raw) To: cygwin > From: Achim Gratz > To: cygwin@cygwin.com > Cc: > Date: 2019/3/3, Sun 02:10 > Subject: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1 > > > Gnuplot version 5.2.6 is available as a release version on Cygwin now. > > > Notes: > ------ > > The configuration has changed to not include "backwards compatibility) > any longer, which removes partial support for deprecated features. > > This build makes use of the new libcerf library package, so gnuplot > should be able to use all functionality that depends on it. > > > -- > *** CYGWIN-ANNOUNCE UNSUBSCRIBE INFO *** > > If you want to unsubscribe from the cygwin-announce mailing list, look > at the "List-Unsubscribe: " tag in the email header of this message. > Send email to the address specified there. It will be in the format: > > cygwin-announce-unsubscribe-you=yourdomain.com@cygwin.com > > If you need more information on unsubscribing, start reading here: > > http://sourceware.org/lists.html#unsubscribe-simple > > Please read *all* of the information on unsubscribing that is available > starting at this URL. Hello Achim I am glad to hear that gnuplot-5.2.6 for Cygwin is released. As an interactive terminal, gnuplot for Cygwin only x11 terminal but it is old terminal and it was considered to be outdated from gnuplot developers. For qt terminal, QT5 should be patched but wxt terminal can be implemented using dev tools implemented in Cygwin. I ask you to implement wxt terminal gnuplot for Cygwin Patch indicated below is attached to gnuplot source to avoid ABI mismatch waring between gnuplot and wxWidgets. --- a/src/wxterminal/wxt_gui.cpp 2018-03-17 07:26:21.926092000 +0900 +++ b/src/wxterminal/wxt_gui.cpp 2018-03-17 07:28:56.748497600 +0900 @@ -88,7 +88,7 @@ * or multi-threaded operation. */ - +#define __GXX_ABI_VERSION 1009 /* define DEBUG here to have debugging messages in stderr */ #include "wxt_gui.h" Tatsuro -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-03 6:01 ` Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) Tatsuro MATSUOKA @ 2019-03-03 18:15 ` Achim Gratz 2019-03-03 22:36 ` Tatsuro MATSUOKA 2019-03-04 7:53 ` Thomas Wolff 0 siblings, 2 replies; 12+ messages in thread From: Achim Gratz @ 2019-03-03 18:15 UTC (permalink / raw) To: cygwin [don't quote email addresses, signatures] Tatsuro MATSUOKA writes: > I am glad to hear that gnuplot-5.2.6 for Cygwin is released. As an > interactive terminal, gnuplot for Cygwin only x11 terminal but it is > old terminal and it was considered to be outdated from gnuplot > developers. I mostly use gnuplot in batch mode myself, so I don't really know about interactive terminals (I don't use the interactive features of the X11 terminal much either). > For qt terminal, QT5 should be patched but wxt terminal can be > implemented using dev tools implemented in Cygwin. Again, if you want that to get fixed, you'll either need to get upstream QT, the Qt maintainer of Cygwin or (if you happen to have a fix for Cygwin) the Cygwin maintainers. I'll happily build with the Qt terminal if it actually works. > I ask you to implement wxt terminal gnuplot for Cygwin > > Patch indicated below is attached to gnuplot source to avoid ABI > mismatch waring between gnuplot and wxWidgets. That's a wxWidget upstream bug, really. I'm not keen on patching around that in gnuplot, so my preference is if it was fixed by wxWidgets one way or the other (and by fixed I don't mean that the fatal error gets demoted to a warning like some build option for wxWidgets apparently allows you to do). Now, I'd be much more excited about that wxWidgets terminal if it allowed gnuplot to optionally run without X11, do you know if that's possible? Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf rackAttack: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-03 18:15 ` Achim Gratz @ 2019-03-03 22:36 ` Tatsuro MATSUOKA 2019-03-04 7:53 ` Thomas Wolff 1 sibling, 0 replies; 12+ messages in thread From: Tatsuro MATSUOKA @ 2019-03-03 22:36 UTC (permalink / raw) To: cygwin Achim Thanks for the reply. > Again, if you want that to get fixed, you'll either need to get upstream > QT, the Qt maintainer of Cygwin or (if you happen to have a fix for > Cygwin) the Cygwin maintainers. I'll happily build with the Qt terminal > if it actually works. The qt terminal for Cygwin works fine on Cygwin, if a patch is attached to QT5. An exapmle snapshot of qt terminal is shown : <http://cygwin.1069669.n5.nabble.com/file/t3087/transparent_solids_2_qt.png> I will ask Yaakov Selkowitz (qt for cygwin maintainer to apply the patch) As a reference, the patch is shown below --- a/qtbase-opensource-src-5.9.4/src/network/socket/qlocalsocket_unix.cpp +++ b/qtbase-opensource-src-5.9.4/src/network/socket/qlocalsocket_unix.cpp @@ -239,7 +239,7 @@ void QLocalSocket::connectToServer(OpenM } // create the socket - if (-1 == (d->connectingSocket = qt_safe_socket(PF_UNIX, SOCK_STREAM, 0, O_NONBLOCK))) { + if (-1 == (d->connectingSocket = qt_safe_socket(PF_UNIX, SOCK_STREAM, 0))) { d->errorOccurred(UnsupportedSocketOperationError, QLatin1String("QLocalSocket::connectToServer")); return; >> I ask you to implement wxt terminal gnuplot for Cygwin >> >> Patch indicated below is attached to gnuplot source to avoid ABI >> mismatch waring between gnuplot and wxWidgets. > > That's a wxWidget upstream bug, really. I'm not keen on patching around > that in gnuplot, so my preference is if it was fixed by wxWidgets one > way or the other (and by fixed I don't mean that the fatal error gets > demoted to a warning like some build option for wxWidgets apparently > allows you to do). Yes. It's a bug wxWidget. I could not find wxWidget maintainer in Cygwin ML. How I do know the maintainer? Anyway I will paste wxt terminal and x11 terminal snapshots. <http://cygwin.1069669.n5.nabble.com/file/t3087/transparent_solids_2_wxt.png> <http://cygwin.1069669.n5.nabble.com/file/t3087/transparent_solids_2_x11.png> > Now, I'd be much more excited about that wxWidgets terminal if it > allowed gnuplot to optionally run without X11, do you know if that's > possible? Do you mean build Cygwin's WxWidget without x11 libraries? On macOS, WxWidget is built without X and uses macOS original graphics. In principle one can build Wxwidget for Cygwin using windows native api like emacs-win32on Cygwin. I do not know that this is possible on wxwidget on Cygwin. I will investigate. Tatsuro -- Sent from: http://cygwin.1069669.n5.nabble.com/Cygwin-list-f3.html -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-03 18:15 ` Achim Gratz 2019-03-03 22:36 ` Tatsuro MATSUOKA @ 2019-03-04 7:53 ` Thomas Wolff 2019-03-04 18:06 ` Achim Gratz 2019-03-05 19:36 ` Gary Johnson 1 sibling, 2 replies; 12+ messages in thread From: Thomas Wolff @ 2019-03-04 7:53 UTC (permalink / raw) To: cygwin Am 03.03.2019 um 19:15 schrieb Achim Gratz: > ... > > Tatsuro MATSUOKA writes: >> ... >> > ... > > Now, I'd be much more excited about that wxWidgets terminal if it > allowed gnuplot to optionally run without X11, do you know if that's possible? It is quite straight-forward to run gnuplot without X11 as mintty will display its output inline: export GNUTERM=sixel gnuplot -e "splot [x=-3:3] [y=-3:3] sin(x) * cos(y)" Thomas -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-04 7:53 ` Thomas Wolff @ 2019-03-04 18:06 ` Achim Gratz 2019-03-04 18:56 ` Thomas Wolff 2019-03-05 19:36 ` Gary Johnson 1 sibling, 1 reply; 12+ messages in thread From: Achim Gratz @ 2019-03-04 18:06 UTC (permalink / raw) To: cygwin Thomas Wolff writes: > It is quite straight-forward to run gnuplot without X11 as mintty will > display its output inline: > > export GNUTERM=sixel > > gnuplot -e "splot [x=-3:3] [y=-3:3] sin(x) * cos(y)" I know and that's rad, now if it also worked inside a tmux or screen session… Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf rackAttack: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-04 18:06 ` Achim Gratz @ 2019-03-04 18:56 ` Thomas Wolff 2019-03-04 19:55 ` Achim Gratz 0 siblings, 1 reply; 12+ messages in thread From: Thomas Wolff @ 2019-03-04 18:56 UTC (permalink / raw) To: cygwin Am 04.03.2019 um 19:06 schrieb Achim Gratz: > Thomas Wolff writes: >> It is quite straight-forward to run gnuplot without X11 as mintty will >> display its output inline: >> >> export GNUTERM=sixel >> >> gnuplot -e "splot [x=-3:3] [y=-3:3] sin(x) * cos(y)" > I know and that's rad, now if it also worked inside a tmux or screen session⦠Sixel graphics are embedded in DSC ... ST controls which are unfortunately the same that screen/tmux use for their transparent pass-through function of unknown escape sequences, so they will filter them out. Maybe it's possible to achieve the desired output with some tricky screen/tmux configuration. Thomas -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-04 18:56 ` Thomas Wolff @ 2019-03-04 19:55 ` Achim Gratz 0 siblings, 0 replies; 12+ messages in thread From: Achim Gratz @ 2019-03-04 19:55 UTC (permalink / raw) To: cygwin Thomas Wolff writes: > Sixel graphics are embedded in DSC ... ST controls which are > unfortunately the same that screen/tmux use for their transparent > pass-through function of unknown escape sequences, so they will filter > them out. I think I've seen a tmux script that brackets the escape with another one, but it's disappointing that this isn't supported out-of-the box. But then again, not many terminal emulators support sixel graphics, unfortunately. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf Q+, Q and microQ: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-04 7:53 ` Thomas Wolff 2019-03-04 18:06 ` Achim Gratz @ 2019-03-05 19:36 ` Gary Johnson 2019-03-05 20:08 ` Achim Gratz 1 sibling, 1 reply; 12+ messages in thread From: Gary Johnson @ 2019-03-05 19:36 UTC (permalink / raw) To: cygwin On 2019-03-04, Thomas Wolff wrote: > It is quite straight-forward to run gnuplot without X11 as mintty > will display its output inline: > > export GNUTERM=sixel > > gnuplot -e "splot [x=-3:3] [y=-3:3] sin(x) * cos(y)" That's really nice! I didn't know terminals could do that. I notice that when I execute those commands on Linux in an xterm (version 344) built with support for sixel graphics, the plot is displayed in color on a white background. When I execute those same commands in mintty 2.9.6, however, the plot is displayed on the default black background and only the surface (in purple) is visible. To see the rest of the plot, still on a black background, I executed gnuplot -e "set term sixel monochrome" -e "splot [x=-3:3] [y=-3:3] sin(x) * cos(y)" Is this a bug in mintty that it doesn't use a white background for the plot? Regards, Gary -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-05 19:36 ` Gary Johnson @ 2019-03-05 20:08 ` Achim Gratz 2019-03-05 20:09 ` Achim Gratz 2019-03-05 20:15 ` Gary Johnson 0 siblings, 2 replies; 12+ messages in thread From: Achim Gratz @ 2019-03-05 20:08 UTC (permalink / raw) To: cygwin Gary Johnson writes: > Is this a bug in mintty that it doesn't use a white background for > the plot? No. By default the background in gnuplot is transparent in terminals that support it. You can set a solid fill color like that: set term sixelgd background #ffffff (that's the white color you wanted). Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-05 20:08 ` Achim Gratz @ 2019-03-05 20:09 ` Achim Gratz 2019-03-05 20:15 ` Gary Johnson 1 sibling, 0 replies; 12+ messages in thread From: Achim Gratz @ 2019-03-05 20:09 UTC (permalink / raw) To: cygwin Achim Gratz writes: > Gary Johnson writes: >> Is this a bug in mintty that it doesn't use a white background for >> the plot? > > No. By default the background in gnuplot is transparent in terminals > that support it. You can set a solid fill color like that: > > set term sixelgd background #ffffff The color string needs quoting of course: set term sixelgd background "#ffffff" Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Wavetables for the Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#BlofeldUserWavetables -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) 2019-03-05 20:08 ` Achim Gratz 2019-03-05 20:09 ` Achim Gratz @ 2019-03-05 20:15 ` Gary Johnson 1 sibling, 0 replies; 12+ messages in thread From: Gary Johnson @ 2019-03-05 20:15 UTC (permalink / raw) To: cygwin On 2019-03-05, Achim Gratz wrote: > Gary Johnson writes: > > Is this a bug in mintty that it doesn't use a white background for > > the plot? > > No. By default the background in gnuplot is transparent in terminals > that support it. You can set a solid fill color like that: > > set term sixelgd background #ffffff > > (that's the white color you wanted). Great! Thank you. Regards, Gary -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2019-03-05 20:15 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-03-02 19:22 [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1 Achim Gratz 2019-03-03 6:01 ` Request to support wxt terminal ( Re: [ANNOUNCEMENT] Updated: gnuplot-5.2.6-1) Tatsuro MATSUOKA 2019-03-03 18:15 ` Achim Gratz 2019-03-03 22:36 ` Tatsuro MATSUOKA 2019-03-04 7:53 ` Thomas Wolff 2019-03-04 18:06 ` Achim Gratz 2019-03-04 18:56 ` Thomas Wolff 2019-03-04 19:55 ` Achim Gratz 2019-03-05 19:36 ` Gary Johnson 2019-03-05 20:08 ` Achim Gratz 2019-03-05 20:09 ` Achim Gratz 2019-03-05 20:15 ` Gary Johnson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).