* xhost: unable to open display ""
@ 2018-01-23 20:59 Waltz, James
2018-01-24 0:57 ` Mark Geisert
0 siblings, 1 reply; 4+ messages in thread
From: Waltz, James @ 2018-01-23 20:59 UTC (permalink / raw)
To: cygwin
Hi-
I think that I have installed all the necessary packages, but I still get the above error, when I type “xhost +” on my local machine.
I am also still getting a “cannot open display: localhost:10.0” error.
This is DESPITE the fact that:
- I set DISPLAY to “localhost:10.0”
- X11Forwarding is set to “yes” in the sshd_config file
- I changed the “hosts” file, under /etc to have actual IP addresses.
Any idea why this might be happening?
Thanks.
jw
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: xhost: unable to open display ""
2018-01-23 20:59 xhost: unable to open display "" Waltz, James
@ 2018-01-24 0:57 ` Mark Geisert
2018-01-24 3:48 ` Jack
0 siblings, 1 reply; 4+ messages in thread
From: Mark Geisert @ 2018-01-24 0:57 UTC (permalink / raw)
To: cygwin
Waltz, James wrote:
> Hi-
>
> I think that I have installed all the necessary packages, but I still get the above error, when I type âxhost +â on my local machine.
>
> I am also still getting a âcannot open display: localhost:10.0â error.
>
> This is DESPITE the fact that:
> - I set DISPLAY to âlocalhost:10.0â
> - X11Forwarding is set to âyesâ in the sshd_config file
> - I changed the âhostsâ file, under /etc to have actual IP addresses.
>
> Any idea why this might be happening?
Yes. Change that "10" to "0". So it's "localhost:0.0" or even ":0.0".
Should work much better.... :)
..mark
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: xhost: unable to open display ""
2018-01-24 0:57 ` Mark Geisert
@ 2018-01-24 3:48 ` Jack
2018-01-24 14:37 ` Waltz, James
0 siblings, 1 reply; 4+ messages in thread
From: Jack @ 2018-01-24 3:48 UTC (permalink / raw)
To: cygwin
On 2018.01.23 19:57, Mark Geisert wrote:
> Waltz, James wrote:
>> Hi-
>>
>> I think that I have installed all the necessary packages, but I
>> still get the above error, when I type “xhost +” on my local machine.
>>
>> I am also still getting a “cannot open display: localhost:10.0”
>> error.
>>
>> This is DESPITE the fact that:
>> - I set DISPLAY to “localhost:10.0”
>> - X11Forwarding is set to “yes” in the sshd_config file
>> - I changed the “hosts” file, under /etc to have actual IP addresses.
>>
>> Any idea why this might be happening?
>
> Yes. Change that "10" to "0". So it's "localhost:0.0" or even
> ":0.0".
> Should work much better.... :)
Unless ssh is involved, which was not stated, but I suspect might be
part of the issue.
Jack
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: xhost: unable to open display ""
2018-01-24 3:48 ` Jack
@ 2018-01-24 14:37 ` Waltz, James
0 siblings, 0 replies; 4+ messages in thread
From: Waltz, James @ 2018-01-24 14:37 UTC (permalink / raw)
To: Jack; +Cc: cygwin
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1583 bytes --]
Hi-
The solution was stupider than I thought:
1. I thought my DISPLAY was set, but it actually wasnât. It worked with â:0.0â.
2. âssh -Yâ worked, whereas âssh -Xâ did not.
Voila! (so far)
Thanks for your help, guys.
Jim Waltz
Sent from my iPhone
On Jan 23, 2018, at 22:48, Jack <ostroffjh@users.sourceforge.net<mailto:ostroffjh@users.sourceforge.net>> wrote:
On 2018.01.23 19:57, Mark Geisert wrote:
Waltz, James wrote:
Hi-
I think that I have installed all the necessary packages, but I still get the above error, when I type âxhost +â on my local machine.
I am also still getting a âcannot open display: localhost:10.0â error.
This is DESPITE the fact that:
- I set DISPLAY to âlocalhost:10.0â
- X11Forwarding is set to âyesâ in the sshd_config file
- I changed the âhostsâ file, under /etc to have actual IP addresses.
Any idea why this might be happening?
Yes. Change that "10" to "0". So it's "localhost:0.0" or even ":0.0".
Should work much better.... :)
Unless ssh is involved, which was not stated, but I suspect might be part of the issue.
Jack
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
\x03BKCB\x1cØ\x19[H\x1c\^[Ü\x1cÎ\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÜ\x1cØ\x19[\Ë\x1d^[[\x03BTN\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÙ\KÃB^[ØÝ[Y[\x18]\x1a[Û\b\b\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÙ^[ØÜË\x1d^[[\x03B[ÝXØÜXH\x1a[Î\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÛ[\vÈÝ[ÝXØÜXK\Ú[\^[\x19CBB
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-01-24 14:37 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-23 20:59 xhost: unable to open display "" Waltz, James
2018-01-24 0:57 ` Mark Geisert
2018-01-24 3:48 ` Jack
2018-01-24 14:37 ` Waltz, James
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).