* Re: Cygwin Digest, Vol 12, Issue 25
[not found] <mailman.14.1613217603.3576782.cygwin@cygwin.com>
@ 2021-02-13 14:53 ` Anuja Chanana
2021-02-13 17:17 ` Brian Inglis
2021-02-13 17:28 ` Marco Atzeri
0 siblings, 2 replies; 3+ messages in thread
From: Anuja Chanana @ 2021-02-13 14:53 UTC (permalink / raw)
To: cygwin
Hi Marco,
Thanks for the reply.
I installed font-util-1.3.2-1 and xorg-x11-fonts-misc-7.5-4. Still, the
warning pops up.
Any idea why does that happen?
Anuja
> Dear Cygwin Users,
> Whenever I try to launch the Xserver on Cygwin using the command startx,
> the following error appears
>
> /usr/bin/twm: warning: font for charset ISO8859-5 is lacking.
> /usr/bin/twm: warning: font for charset KOI8-R is lacking.
> /usr/bin/twm: warning: font for charset ISO8859-7 is lacking.
> /usr/bin/twm: warning: font for charset JISX0208.1983-0 is lacking.
> /usr/bin/twm: warning: font for charset KSC5601.1987-0 is lacking.
> /usr/bin/twm: warning: font for charset GB2312.1980-0 is lacking.
> /usr/bin/twm: warning: font for charset JISX0201.1976-0 is lacking.
>
> How to solve it?
>
> Looking forward to hearing from you.
>
> Thanks,
> Anuja
$ cygcheck -p ISO8859-5 |grep font
...
font-util-1.3.2-1 - font-util: X.Org font utilities and font maps
...
xorg-x11-fonts-misc-7.5-4 - xorg-x11-fonts-misc: X11 core fonts
Regards
Marco
On Sat, Feb 13, 2021 at 5:45 PM <cygwin-request@cygwin.com> wrote:
> Send Cygwin mailing list submissions to
> cygwin@cygwin.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://cygwin.com/mailman/listinfo/cygwin
> or, via email, send a message with subject or body 'help' to
> cygwin-request@cygwin.com
>
> You can reach the person managing the list at
> cygwin-owner@cygwin.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Cygwin digest..."
> Today's Topics:
>
> 1. Re: X server (Marco Atzeri)
> 2. Re: setrlimit always fails (Patrick Chkoreff)
> 3. Re: setrlimit always fails (Brian Inglis)
> 4. Re: setrlimit always fails (Brian Inglis)
> 5. Cygwin doesn't handle SIGWINCH properly in Windows Terminal
> (Alvin Seville)
>
>
>
> ---------- Forwarded message ----------
> From: Marco Atzeri <marco.atzeri@gmail.com>
> To: cygwin@cygwin.com
> Cc:
> Bcc:
> Date: Fri, 12 Feb 2021 13:12:05 +0100
> Subject: Re: X server
>
>
> On 12.02.2021 08:22, Anuja Chanana via Cygwin wrote:
> > Dear Cygwin Users,
> > Whenever I try to launch the Xserver on Cygwin using the command startx,
> > the following error appears
> >
> > /usr/bin/twm: warning: font for charset ISO8859-5 is lacking.
> > /usr/bin/twm: warning: font for charset KOI8-R is lacking.
> > /usr/bin/twm: warning: font for charset ISO8859-7 is lacking.
> > /usr/bin/twm: warning: font for charset JISX0208.1983-0 is lacking.
> > /usr/bin/twm: warning: font for charset KSC5601.1987-0 is lacking.
> > /usr/bin/twm: warning: font for charset GB2312.1980-0 is lacking.
> > /usr/bin/twm: warning: font for charset JISX0201.1976-0 is lacking.
> >
> > How to solve it?
> >
> > Looking forward to hearing from you.
> >
> > Thanks,
> > Anuja
>
>
> $ cygcheck -p ISO8859-5 |grep font
> ...
> font-util-1.3.2-1 - font-util: X.Org font utilities and font maps
> ...
> xorg-x11-fonts-misc-7.5-4 - xorg-x11-fonts-misc: X11 core fonts
>
> Regards
> Marco
>
>
>
>
>
>
> ---------- Forwarded message ----------
> From: Patrick Chkoreff <pc@fexl.com>
> To: cygwin@cygwin.com
> Cc:
> Bcc:
> Date: Fri, 12 Feb 2021 10:11:09 -0500
> Subject: Re: setrlimit always fails
> Ken Brown via Cygwin wrote on 2/11/21 9:06 PM:
>
> > Cygwin's setrlimit only supports a few resources, as you can see in the
> > source:
> >
> >
> https://cygwin.com/git/?p=newlib-cygwin.git;a=blob;f=winsup/cygwin/resource.cc;h=97777e9d223466b7635b990d6c9e0bfb9e2e9a46;hb=HEAD#l201
>
> Thank you to all who replied. Shortly after I sent the email, I did
> some more searching and did find some posts to that effect, including
> one that said setrlimit was originally added as a stub to support
> porting OpenSSH.
>
> Also thank you for the pointer to the source code.
>
> The reason I'm asking about setrlimit is that I'm porting the code for
> my functional programming language "Fexl" from Linux to Windows under
> Cygwin. (https://fexl.com)
>
> In that language I have embedded functions limit_time, limit_stack, and
> limit_memory which call setrlimit. Those functions can be used to set
> sensible limits before running potentially dangerous code. It's safe
> enough to allow running a program entered by a stranger in a text area
> on a web site -- even a program which deliberately tries to use an
> unbounded amount of memory.
>
> I don't know if native Windows provides enough to flesh out setrlimit
> with the equivalent behavior on Linux, even for my very limited usage
> (RLIMIT_CPU, RLIMIT_STACK, RLIMIT_AS). Therefore the only way for me to
> do safe limits in Fexl would be to actually count evaluation steps in my
> evaluation loop, and memory usage in my allocation wrapper, and halt the
> program if it exceeds any user-imposed limits.
>
> So I would have to check evaluation steps here:
>
>
> https://github.com/chkoreff/Fexl/blob/956bdf85ff5046ebfa7fe582584fedc6881152db/src/value.c#L137
>
> And check memory usage here:
>
>
> https://github.com/chkoreff/Fexl/blob/956bdf85ff5046ebfa7fe582584fedc6881152db/src/memory.c#L28
>
> It's either that or deprecate my usage of setrlimit altogether, making
> it impossible to protect against runaway execution of potentially
> dangerous unvetted code.
>
> I will say that my first attempt at compiling the Linux code under
> Cygwin went very well. The only compiler error was in some code that
> calls strptime. To fix that, I had to use some macros in a sequence
> like this:
>
> #ifdef __CYGWIN__
> /* Ensure that strptime is accessible. */
> #define _XOPEN_SOURCE
> #endif
>
> #include <stdint.h>
> ...
> #ifndef __CYGWIN__
> /* Ensure that strptime is accessible. */
> #define __USE_XOPEN
> #endif
>
> #include <time.h>
>
>
> That seems to be the simplest I can make that.
>
> Thank you to all the Cygwin developers who made this porting effort
> possible!
>
>
> -- Patrick
>
>
>
>
> ---------- Forwarded message ----------
> From: Brian Inglis <Brian.Inglis@systematicsw.ab.ca>
> To: cygwin@cygwin.com
> Cc:
> Bcc:
> Date: Fri, 12 Feb 2021 11:56:12 -0700
> Subject: Re: setrlimit always fails
> On 2021-02-12 02:12, Corinna Vinschen via Cygwin wrote:
> > On Feb 12 00:26, Brian Inglis wrote:
> >> On 2021-02-11 19:06, Ken Brown via Cygwin wrote:
> >>> On 2/11/2021 10:23 AM, Patrick Chkoreff wrote:
> >>>> I'm trying to use setrlimit to impose limits on various resources such
> >>>> as CPU time and memory. The call to setrlimit always fails. I've
> >>>> distilled this into the following example test.c:
> >>> [...]
> >>>> if (setrlimit(RLIMIT_CPU,&rlim) < 0)
> >>> [...]
> >>>> setrlimit: Invalid argument
> >>>
> >>> Cygwin's setrlimit only supports a few resources, as you can see in
> the source:
> >>>
> >>>
> https://cygwin.com/git/?p=newlib-cygwin.git;a=blob;f=winsup/cygwin/resource.cc;h=97777e9d223466b7635b990d6c9e0bfb9e2e9a46;hb=HEAD#l201
> >>
> >> In that case could I suggest:
> >>
> >>
> /usr/share/doc/cygwin-doc/html/cygwin-api/compatibility.html#std-susv4
> >> https://cygwin.com/cygwin-api/compatibility.html#std-susv4
> >>
> >> in
> https://cygwin.com/git/?p=newlib-cygwin.git;a=blob;f=winsup/doc/posix.xml
> >>
> >> get/setrlimit entries should be annotated with:
> >
> > https://cygwin.com/acronyms/#PGA
>
> I'll see what I can do. Does anyone know if <ulink> is supported within
> <screen>? I seem to remember struggles updating proc(5) in
> specialnames.xml.
>
> It appears that code using other than the common POSIX resources need
> existence
> checks.
> I am unsure if it is worth adding definitions for any others.
> It may be possible to implement RSS, NPROC, LOCKS, NICE, but
> https://cygwin.com/acronyms/#SHDTI
>
> Comparing Cygwin and Linux ([uapi/]asm-generic/}:
>
> #define RLIMIT_CPU 0 /* CPU time in seconds */
> #define RLIMIT_FSIZE 1 /* Maximum filesize */
> #define RLIMIT_DATA 2 /* max data size */
> #define RLIMIT_STACK 3 /* max stack size */
> #define RLIMIT_CORE 4 /* max core file size */
> #ifdef LINUX
> #define RLIMIT_RSS 5 /* max resident set size */
> #define RLIMIT_NPROC 6 /* max number of processes */
> #define RLIMIT_NOFILE 7 /* max number of open files */
> #define RLIMIT_AS 9 /* address space limit */
> #else
> #define RLIMIT_NOFILE 5 /* max number of open files */
> #define RLIMIT_OFILE RLIMIT_NOFILE /* BSD name */
> #define RLIMIT_AS 6 /* address space limit */
> #endif
> #ifdef LINUX
> #define RLIMIT_LOCKS 10 /* maximum file locks held */
> #define RLIMIT_SIGPENDING 11 /* max number of pending signals */
> #define RLIMIT_MSGQUEUE 12 /* maximum bytes in POSIX mqueues
> */
> #define RLIMIT_NICE 13 /* max nice prio allowed to raise
> to */
> #define RLIMIT_RTPRIO 14 /* maximum realtime priority */
> #define RLIMIT_RTTIME 15 /* timeout for RT tasks in us */
> #define RLIM_NLIMITS 16
> #else
> #define RLIMIT_NLIMITS 7 /* upper bound of RLIMIT_* defines
> */
> #endif
>
> Linux man says:
>
> "RLIMIT_MEMLOCK and RLIMIT_NPROC derive from BSD and are not specified in
> POSIX.1; they are present on the BSDs and Linux, but on few other
> implementations.
> RLIMIT_RSS derives from BSD and is not specified in POSIX.1; it is
> nevertheless
> present on most implementations.
> RLIMIT_MSGQUEUE, RLIMIT_NICE, RLIMIT_RTPRIO, RLIMIT_RTTIME, and
> RLIMIT_SIGPENDING are Linux-specific."
>
> --
> Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
>
> This email may be disturbing to some readers as it contains
> too much technical detail. Reader discretion is advised.
> [Data in binary units and prefixes, physical quantities in SI.]
>
>
>
>
> ---------- Forwarded message ----------
> From: Brian Inglis <Brian.Inglis@systematicsw.ab.ca>
> To: cygwin@cygwin.com
> Cc:
> Bcc:
> Date: Fri, 12 Feb 2021 13:38:08 -0700
> Subject: Re: setrlimit always fails
> On 2021-02-12 11:56, Brian Inglis wrote:
> > On 2021-02-12 02:12, Corinna Vinschen via Cygwin wrote:
> >> On Feb 12 00:26, Brian Inglis wrote:
> >>> On 2021-02-11 19:06, Ken Brown via Cygwin wrote:
> >>>> On 2/11/2021 10:23 AM, Patrick Chkoreff wrote:
> >>>>> I'm trying to use setrlimit to impose limits on various resources
> such
> >>>>> as CPU time and memory. The call to setrlimit always fails. I've
> >>>>> distilled this into the following example test.c:
> >>>>> if (setrlimit(RLIMIT_CPU,&rlim) < 0)
> >>>>> setrlimit: Invalid argument
>
> >>>> Cygwin's setrlimit only supports a few resources, as you can see in
> the source:
> >>>>
> https://cygwin.com/git/?p=newlib-cygwin.git;a=blob;f=winsup/cygwin/resource.cc;h=97777e9d223466b7635b990d6c9e0bfb9e2e9a46;hb=HEAD#l201
>
> >>> In that case could I suggest:
> >>>
> /usr/share/doc/cygwin-doc/html/cygwin-api/compatibility.html#std-susv4
> >>> https://cygwin.com/cygwin-api/compatibility.html#std-susv4
> >>> in
> https://cygwin.com/git/?p=newlib-cygwin.git;a=blob;f=winsup/doc/posix.xml
> >>> get/setrlimit entries should be annotated with:
>
> >> https://cygwin.com/acronyms/#PGA
>
> > I'll see what I can do. Does anyone know if <ulink> is supported within
> > <screen>? I seem to remember struggles updating proc(5) in
> specialnames.xml.
> > It appears that code using other than the common POSIX resources need
> existence
> > checks.
> > I am unsure if it is worth adding definitions for any others.
> > It may be possible to implement RSS, NPROC, LOCKS, NICE, but
> https://cygwin.com/acronyms/#SHTDI
> >
> > Comparing Cygwin and Linux ([uapi/]asm-generic/}:
> >
> > #define RLIMIT_CPU 0 /* CPU time in seconds */
> > #define RLIMIT_FSIZE 1 /* Maximum filesize */
> > #define RLIMIT_DATA 2 /* max data size */
> > #define RLIMIT_STACK 3 /* max stack size */
> > #define RLIMIT_CORE 4 /* max core file size */
> > #ifdef LINUX
> > #define RLIMIT_RSS 5 /* max resident set size */
> > #define RLIMIT_NPROC 6 /* max number of processes */
> > #define RLIMIT_NOFILE 7 /* max number of open files */
> #define RLIMIT_MEMLOCK 8 /* max locked-in-memory address
> space */
> > #define RLIMIT_AS 9 /* address space limit */
> > #else
> > #define RLIMIT_NOFILE 5 /* max number of open files */
> > #define RLIMIT_OFILE RLIMIT_NOFILE /* BSD name */
> > #define RLIMIT_AS 6 /* address space limit */
> > #endif
> > #ifdef LINUX
> > #define RLIMIT_LOCKS 10 /* maximum file locks held */
> > #define RLIMIT_SIGPENDING 11 /* max number of pending signals */
> > #define RLIMIT_MSGQUEUE 12 /* maximum bytes in POSIX mqueues
> */
> > #define RLIMIT_NICE 13 /* max nice prio allowed to raise
> to */
> > #define RLIMIT_RTPRIO 14 /* maximum realtime priority */
> > #define RLIMIT_RTTIME 15 /* timeout for RT tasks in us */
> > #define RLIM_NLIMITS 16
> > #else
> > #define RLIMIT_NLIMITS 7 /* upper bound of RLIMIT_* defines
> */
> > #endif
> >
> > Linux man says:
> >
> > "RLIMIT_MEMLOCK and RLIMIT_NPROC derive from BSD and are not specified
> in
> > POSIX.1; they are present on the BSDs and Linux, but on few other
> implementations.
> > RLIMIT_RSS derives from BSD and is not specified in POSIX.1; it is
> nevertheless
> > present on most implementations.
> > RLIMIT_MSGQUEUE, RLIMIT_NICE, RLIMIT_RTPRIO, RLIMIT_RTTIME, and
> > RLIMIT_SIGPENDING are Linux-specific."
>
> --
> Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
>
> This email may be disturbing to some readers as it contains
> too much technical detail. Reader discretion is advised.
> [Data in binary units and prefixes, physical quantities in SI.]
>
>
>
>
> ---------- Forwarded message ----------
> From: Alvin Seville <alvinseville7cf@gmail.com>
> To: cygwin@cygwin.com
> Cc:
> Bcc:
> Date: Sat, 13 Feb 2021 20:39:39 +1000
> Subject: Cygwin doesn't handle SIGWINCH properly in Windows Terminal
> Windows build number: Win32NT 10.0.19042.0 Microsoft Windows NT
> 10.0.19042.0
> Windows Terminal version (if applicable): 1.5.10271.0
>
> Script to reproduce this issue:
>
> #!/usr/bin/env bashfunction outputText()
> {
> local text=$1
> local -i textLength=${#text}
>
> local -i line="$(tput lines) / 2"
> local -i col="$(tput cols) / 2 - $textLength / 2"
>
> clear
> echo -en "\e[$line;${col}H$text"
> }
> trap "outputText 'Hello world!'" SIGWINCH
>
> outputText 'Hello world!'while truedo
> :done
>
> As you see Windows Terminal doesn't handle SIGWINCH
> <https://man7.org/linux/man-pages/man7/signal.7.html> properly. However
> everything works fine when I execute my script directly from Cygwin
> Terminal without Windows Terminal which users told
> <https://github.com/microsoft/terminal/issues/9113#issuecomment-777703560>
> me that it seems to be a Cygwin bug.
> --
> alvinseville7cf@Alvins-MacBook-Pro ~ $* echo *"Best regards, Alvin
> Seville."*
> && exit*
>
> --
> Problem reports: https://cygwin.com/problems.html
> FAQ: https://cygwin.com/faq/
> Documentation: https://cygwin.com/docs.html
> Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
>
^ permalink raw reply [flat|nested] 3+ messages in thread