* cpan broken ??? [not found] <CGME20180205135913eucas1p11d0a725dfc95efd35c6264c4a06af748@eucas1p1.samsung.com> @ 2018-02-05 13:59 ` Pavel Fedin 2018-02-05 14:44 ` Jostein Berntsen 2018-02-05 19:47 ` Achim Gratz 0 siblings, 2 replies; 8+ messages in thread From: Pavel Fedin @ 2018-02-05 13:59 UTC (permalink / raw) To: cygwin Hello everyone! I am trying to install a Perl module via CPAN and it fails: --- cut --- $ cpan install Parallel::ForkManager CPAN: Storable loaded ok (v2.62) Reading '/home/p.fedin/.cpan/Metadata' Database was generated on Mon, 05 Feb 2018 12:17:02 GMT Running install for module 'Parallel::ForkManager' CPAN: Digest::SHA loaded ok (v6.01) CPAN: Compress::Zlib loaded ok (v2.074) Checksum for /home/p.fedin/.cpan/sources/authors/id/Y/YA/YANICK/Parallel-ForkManager-1.19.tar.gz ok 'YAML' not installed, will not store persistent state CPAN: CPAN::Meta::Requirements loaded ok (v2.140) CPAN: Parse::CPAN::Meta loaded ok (v2.150010) CPAN: CPAN::Meta loaded ok (v2.150010) The content of '/home/p.fedin/.cpan/build/Parallel-ForkManager-1.19-6/META.json' is not a HASH reference. Cannot use it. Configuring Y/YA/YANICK/Parallel-ForkManager-1.19.tar.gz with Makefile.PL Checking if your kit is complete... Looks good Warning: prerequisite Test::Warn 0 not found. Could not load PERL_YAML_BACKEND 'YAML' at /usr/share/perl5/5.26/CPAN/Meta.pm line 622. Warning: No success on command[/usr/bin/perl Makefile.PL] YANICK/Parallel-ForkManager-1.19.tar.gz /usr/bin/perl Makefile.PL -- NOT OK --- cut --- I've just updated; the system is x86-64. How to fix this? Kind regards, Pavel Fedin Senior Engineer Samsung Electronics Research center Russia -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: cpan broken ??? 2018-02-05 13:59 ` cpan broken ??? Pavel Fedin @ 2018-02-05 14:44 ` Jostein Berntsen 2018-02-05 15:00 ` Csaba Raduly 2018-02-05 19:47 ` Achim Gratz 1 sibling, 1 reply; 8+ messages in thread From: Jostein Berntsen @ 2018-02-05 14:44 UTC (permalink / raw) To: cygwin On 05.02.18,16:59, Pavel Fedin wrote: > I am trying to install a Perl module via CPAN and it fails: > --- cut --- > $ cpan install Parallel::ForkManager > CPAN: Storable loaded ok (v2.62) > Reading '/home/p.fedin/.cpan/Metadata' > Database was generated on Mon, 05 Feb 2018 12:17:02 GMT > Running install for module 'Parallel::ForkManager' > CPAN: Digest::SHA loaded ok (v6.01) > CPAN: Compress::Zlib loaded ok (v2.074) > Checksum for /home/p.fedin/.cpan/sources/authors/id/Y/YA/YANICK/Parallel-ForkManager-1.19.tar.gz ok > 'YAML' not installed, will not store persistent state > CPAN: CPAN::Meta::Requirements loaded ok (v2.140) > CPAN: Parse::CPAN::Meta loaded ok (v2.150010) > CPAN: CPAN::Meta loaded ok (v2.150010) > The content of '/home/p.fedin/.cpan/build/Parallel-ForkManager-1.19-6/META.json' is not a HASH reference. Cannot use it. > Configuring Y/YA/YANICK/Parallel-ForkManager-1.19.tar.gz with Makefile.PL > Checking if your kit is complete... > Looks good > Warning: prerequisite Test::Warn 0 not found. > Could not load PERL_YAML_BACKEND 'YAML' > at /usr/share/perl5/5.26/CPAN/Meta.pm line 622. > Warning: No success on command[/usr/bin/perl Makefile.PL] > YANICK/Parallel-ForkManager-1.19.tar.gz > /usr/bin/perl Makefile.PL -- NOT OK > > --- cut --- > I've just updated; the system is x86-64. How to fix this? > You can try "sudo cpan install YAML" first on the command line. Also check that you have 'make' installed. Jostein -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: cpan broken ??? 2018-02-05 14:44 ` Jostein Berntsen @ 2018-02-05 15:00 ` Csaba Raduly 2018-02-05 15:26 ` Pavel Fedin 0 siblings, 1 reply; 8+ messages in thread From: Csaba Raduly @ 2018-02-05 15:00 UTC (permalink / raw) To: cygwin list On Mon, Feb 5, 2018 at 3:45 PM, Jostein Berntsen wrote: > On 05.02.18,16:59, Pavel Fedin wrote: >> I am trying to install a Perl module via CPAN and it fails: >> --- cut --- ... >> Warning: prerequisite Test::Warn 0 not found. >> Could not load PERL_YAML_BACKEND 'YAML' >> at /usr/share/perl5/5.26/CPAN/Meta.pm line 622. >> Warning: No success on command[/usr/bin/perl Makefile.PL] >> YANICK/Parallel-ForkManager-1.19.tar.gz >> /usr/bin/perl Makefile.PL -- NOT OK >> >> --- cut --- >> I've just updated; the system is x86-64. How to fix this? >> > > You can try "sudo cpan install YAML" first on the command line. Also > check that you have 'make' installed. > It says /usr/bin/perl Makefile.PL -- NOT OK I believe 'make' was not run at all. Maybe something (either the package or CPAN itself) needs YAML. Csaba -- GCS a+ e++ d- C++ ULS$ L+$ !E- W++ P+++$ w++$ tv+ b++ DI D++ 5++ The Tao of math: The numbers you can count are not the real numbers. Life is complex, with real and imaginary parts. "Ok, it boots. Which means it must be bug-free and perfect. " -- Linus Torvalds "People disagree with me. I just ignore them." -- Linus Torvalds -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: cpan broken ??? 2018-02-05 15:00 ` Csaba Raduly @ 2018-02-05 15:26 ` Pavel Fedin 2018-02-05 19:09 ` Jostein Berntsen 2018-02-05 19:49 ` Achim Gratz 0 siblings, 2 replies; 8+ messages in thread From: Pavel Fedin @ 2018-02-05 15:26 UTC (permalink / raw) To: 'Csaba Raduly', 'cygwin list' Hello! > -----Original Message----- > From: cygwin-owner@cygwin.com [mailto:cygwin-owner@cygwin.com] On Behalf Of Csaba Raduly > Sent: Monday, February 05, 2018 6:00 PM > To: cygwin list <cygwin@cygwin.com> > Subject: Re: cpan broken ??? > > On Mon, Feb 5, 2018 at 3:45 PM, Jostein Berntsen wrote: > > On 05.02.18,16:59, Pavel Fedin wrote: > >> I am trying to install a Perl module via CPAN and it fails: > >> --- cut --- > ... > >> Warning: prerequisite Test::Warn 0 not found. > >> Could not load PERL_YAML_BACKEND 'YAML' > >> at /usr/share/perl5/5.26/CPAN/Meta.pm line 622. > >> Warning: No success on command[/usr/bin/perl Makefile.PL] > >> YANICK/Parallel-ForkManager-1.19.tar.gz > >> /usr/bin/perl Makefile.PL -- NOT OK > >> > >> --- cut --- > >> I've just updated; the system is x86-64. How to fix this? > >> > > > > You can try "sudo cpan install YAML" first on the command line. Also > > check that you have 'make' installed. [p.fedin] sudo?? On Cygwin??? > > > > It says > /usr/bin/perl Makefile.PL -- NOT OK > > I believe 'make' was not run at all. Maybe something (either the > package or CPAN itself) needs YAML. [p.fedin] --- cut --- $ cpan install YAML CPAN: Storable loaded ok (v2.62) Reading '/home/p.fedin/.cpan/Metadata' Database was generated on Mon, 05 Feb 2018 12:17:02 GMT Running install for module 'YAML' CPAN: Digest::SHA loaded ok (v6.01) CPAN: Compress::Zlib loaded ok (v2.074) Checksum for /home/p.fedin/.cpan/sources/authors/id/T/TI/TINITA/YAML-1.24.tar.gz ok 'YAML' not installed, will not store persistent state CPAN: CPAN::Meta::Requirements loaded ok (v2.140) CPAN: Parse::CPAN::Meta loaded ok (v2.150010) CPAN: CPAN::Meta loaded ok (v2.150010) The content of '/home/p.fedin/.cpan/build/YAML-1.24-3/META.json' is not a HASH reference. Cannot use it. Configuring T/TI/TINITA/YAML-1.24.tar.gz with Makefile.PL Checking if your kit is complete... Looks good Warning: prerequisite Test::YAML 1.05 not found. Could not load PERL_YAML_BACKEND 'YAML' at /usr/share/perl5/5.26/CPAN/Meta.pm line 622. Warning: No success on command[/usr/bin/perl Makefile.PL] TINITA/YAML-1.24.tar.gz /usr/bin/perl Makefile.PL -- NOT OK --- cut --- Neither anything called "yaml" is listed in setup.exe Kind regards, Pavel Fedin Senior Engineer Samsung Electronics Research center Russia -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: cpan broken ??? 2018-02-05 15:26 ` Pavel Fedin @ 2018-02-05 19:09 ` Jostein Berntsen 2018-02-05 19:49 ` Achim Gratz 1 sibling, 0 replies; 8+ messages in thread From: Jostein Berntsen @ 2018-02-05 19:09 UTC (permalink / raw) To: cygwin On 05.02.18,18:26, Pavel Fedin wrote: > > -----Original Message----- > > From: cygwin-owner@cygwin.com [mailto:cygwin-owner@cygwin.com] On Behalf Of Csaba Raduly > > Sent: Monday, February 05, 2018 6:00 PM > > To: cygwin list <cygwin@cygwin.com> > > Subject: Re: cpan broken ??? > > > > On Mon, Feb 5, 2018 at 3:45 PM, Jostein Berntsen wrote: > > > On 05.02.18,16:59, Pavel Fedin wrote: > > >> I am trying to install a Perl module via CPAN and it fails: > > >> --- cut --- > > ... > > >> Warning: prerequisite Test::Warn 0 not found. > > >> Could not load PERL_YAML_BACKEND 'YAML' > > >> at /usr/share/perl5/5.26/CPAN/Meta.pm line 622. > > >> Warning: No success on command[/usr/bin/perl Makefile.PL] > > >> YANICK/Parallel-ForkManager-1.19.tar.gz > > >> /usr/bin/perl Makefile.PL -- NOT OK > > >> > > >> --- cut --- > > >> I've just updated; the system is x86-64. How to fix this? > > >> > > > > > > You can try "sudo cpan install YAML" first on the command line. Also > > > check that you have 'make' installed. > [p.fedin] > > sudo?? On Cygwin??? > Sorry, that should be: "cpan install YAML" in cygwin. Jostein -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: cpan broken ??? 2018-02-05 15:26 ` Pavel Fedin 2018-02-05 19:09 ` Jostein Berntsen @ 2018-02-05 19:49 ` Achim Gratz 2018-02-06 12:59 ` Pavel Fedin 1 sibling, 1 reply; 8+ messages in thread From: Achim Gratz @ 2018-02-05 19:49 UTC (permalink / raw) To: cygwin Pavel Fedin writes: > Neither anything called "yaml" is listed in setup.exe Well, I have perl-CPAN-Meta-YAML perl-Test-YAML perl-YAML perl-YAML-LibYAML perl-YAML-Tiny in setup. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf microQ V2.22R2: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: cpan broken ??? 2018-02-05 19:49 ` Achim Gratz @ 2018-02-06 12:59 ` Pavel Fedin 0 siblings, 0 replies; 8+ messages in thread From: Pavel Fedin @ 2018-02-06 12:59 UTC (permalink / raw) To: 'Achim Gratz', cygwin Hello! Thank you for help; i just haven't got used to the new setup where you have to choose "Not installed" first. A small note: Looks like dependency list for these packages is missing. Nothing tells me that cpan wants PERL::YAML and JSON::XS; and JSON::XS wants JSON. Kind regards, Pavel Fedin Senior Engineer Samsung Electronics Research center Russia > -----Original Message----- > From: cygwin-owner@cygwin.com [mailto:cygwin-owner@cygwin.com] On Behalf Of Achim Gratz > Sent: Monday, February 05, 2018 10:50 PM > To: cygwin@cygwin.com > Subject: Re: cpan broken ??? > > Pavel Fedin writes: > > Neither anything called "yaml" is listed in setup.exe > > Well, I have > > perl-CPAN-Meta-YAML > perl-Test-YAML > perl-YAML > perl-YAML-LibYAML > perl-YAML-Tiny > > in setup. > > > Regards, > Achim. > -- > +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ > > SD adaptation for Waldorf microQ V2.22R2: > http://Synth.Stromeko.net/Downloads.html#WaldorfSDada > > -- > Problem reports: http://cygwin.com/problems.html > FAQ: http://cygwin.com/faq/ > Documentation: http://cygwin.com/docs.html > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: cpan broken ??? 2018-02-05 13:59 ` cpan broken ??? Pavel Fedin 2018-02-05 14:44 ` Jostein Berntsen @ 2018-02-05 19:47 ` Achim Gratz 1 sibling, 0 replies; 8+ messages in thread From: Achim Gratz @ 2018-02-05 19:47 UTC (permalink / raw) To: cygwin Pavel Fedin writes: > I am trying to install a Perl module via CPAN and it fails: You apparently didn't ask cpan to install prerequisites. Note that you should not install via CPAN if any of those modules are available in Cygwin unless you really know what you are doing. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Samples for the Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#BlofeldSamplesExtra -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-02-06 12:59 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20180205135913eucas1p11d0a725dfc95efd35c6264c4a06af748@eucas1p1.samsung.com>
2018-02-05 13:59 ` cpan broken ??? Pavel Fedin
2018-02-05 14:44 ` Jostein Berntsen
2018-02-05 15:00 ` Csaba Raduly
2018-02-05 15:26 ` Pavel Fedin
2018-02-05 19:09 ` Jostein Berntsen
2018-02-05 19:49 ` Achim Gratz
2018-02-06 12:59 ` Pavel Fedin
2018-02-05 19:47 ` Achim Gratz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).