* seteuid 1019: Operation not permitted
@ 2013-09-17 19:36 Evan Rowley
2013-09-20 13:35 ` Larry Hall (Cygwin)
2014-02-16 2:12 ` Evan Rowley
0 siblings, 2 replies; 4+ messages in thread
From: Evan Rowley @ 2013-09-17 19:36 UTC (permalink / raw)
To: Andrey Repin
Hi Guys
I have the debug logs of an sshd that terminated connections when it
recieves the following error:
seteuid 1019: Operation not permitted
This server is setup with most of the defualts needed to run sshd.
There is a cyg_server user as set up by the ssh-host-config script and
cyglsa-config has been run too. I've set up cyglsa and ssh-host-config
with the appropriate passwords for the users. Still, I'm having errors
related to seteuid.
I have another sever where sshd is working just fine. In fact, that
server was a year-old clone of the server where sshd is not working.
One difference I noticed in the overall configuration of both servers
is that on the server where sshd works, a root group was created
during the cygwin install with gid 0. Not by me, but auto-magically.
If I reinstall and reconfigure everything on these two servers, the
outcome is always the same. The respective cygcheck for each server
can be found at the bottom of this email. This is a continuation of a
topic "Way to test cyglsa?" where Larry Hall was helping me.
Note that early in the sshd logs is a mention of permissions and
/var/empty. Even with cyg_server owning the file and 700 permissions
the same seteuid problem occurs.
debug2: load_server_config: filename /etc/sshd_config
debug2: load_server_config: done config len = 350
debug2: parse_server_config: config /etc/sshd_config len 350
debug3: /etc/sshd_config:13 setting Port 22
debug3: /etc/sshd_config:41 setting StrictModes no
debug3: /etc/sshd_config:45 setting RSAAuthentication yes
debug3: /etc/sshd_config:46 setting PubkeyAuthentication yes
debug3: /etc/sshd_config:50 setting AuthorizedKeysFile .ssh/authorized_keys
debug3: /etc/sshd_config:68 setting PasswordAuthentication no
debug3: /etc/sshd_config:69 setting PermitEmptyPasswords yes
debug3: /etc/sshd_config:105 setting UsePrivilegeSeparation sandbox
debug3: /etc/sshd_config:121 setting Subsystem sftp /usr/sbin/sftp-server
debug1: sshd version OpenSSH_6.2, OpenSSL 1.0.1e 11 Feb 2013
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type RSA
debug1: private host key: #0 type 1 RSA
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type DSA
debug1: private host key: #1 type 2 DSA
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type ECDSA
debug1: private host key: #2 type 3 ECDSA
debug1: rexec_argv[0]='/usr/sbin/sshd'
debug1: rexec_argv[1]='-D'
debug1: rexec_argv[2]='-ddd'
debug2: fd 3 setting O_NONBLOCK
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
debug1: fd 4 clearing O_NONBLOCK
debug1: Server will not fork when running in debugging mode.
debug3: send_rexec_state: entering fd = 7 config len 350
debug3: ssh_msg_send: type 0
debug3: send_rexec_state: done
debug1: rexec start in 4 out 4 newsock 4 pipe -1 sock 7
debug1: inetd sockets after dupping: 3, 3
Connection from 127.0.0.1 port 3429
debug1: Client protocol version 2.0; client software version OpenSSH_6.2
debug1: match: OpenSSH_6.2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
debug2: fd 3 setting O_NONBLOCK
debug3: ssh_sandbox_init: preparing rlimit sandbox
debug2: Network child is on pid 1552
debug3: preauth child monitor started
debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug2: kex_parse_kexinit:
ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
[preauth]
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm-at-openssh-dot-com,aes256-gcm-at-openssh-dot-com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc-at-lysator.liu.se
[preauth]
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm-at-openssh-dot-com,aes256-gcm-at-openssh-dot-com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc-at-lysator.liu.se
[preauth]
debug2: kex_parse_kexinit:
hmac-md5-etm-at-openssh-dot-com,hmac-sha1-etm-at-openssh-dot-com,umac-64-etm-at-openssh-dot-com,umac-128-etm-at-openssh-dot-com,hmac-sha2-256-etm-at-openssh-dot-com,hmac-sha2-512-etm-at-openssh-dot-com,hmac-ripemd160-etm-at-openssh-dot-com,hmac-sha1-96-etm-at-openssh-dot-com,hmac-md5-96-etm-at-openssh-dot-com,hmac-md5,hmac-sha1,umac-64-at-openssh-dot-com,umac-128-at-openssh-dot-com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160-at-openssh-dot-com,hmac-sha1-96,hmac-md5-96
[preauth]
debug2: kex_parse_kexinit:
hmac-md5-etm-at-openssh-dot-com,hmac-sha1-etm-at-openssh-dot-com,umac-64-etm-at-openssh-dot-com,umac-128-etm-at-openssh-dot-com,hmac-sha2-256-etm-at-openssh-dot-com,hmac-sha2-512-etm-at-openssh-dot-com,hmac-ripemd160-etm-at-openssh-dot-com,hmac-sha1-96-etm-at-openssh-dot-com,hmac-md5-96-etm-at-openssh-dot-com,hmac-md5,hmac-sha1,umac-64-at-openssh-dot-com,umac-128-at-openssh-dot-com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160-at-openssh-dot-com,hmac-sha1-96,hmac-md5-96
[preauth]
debug2: kex_parse_kexinit: none,zlib-at-openssh-dot-com [preauth]
debug2: kex_parse_kexinit: none,zlib-at-openssh-dot-com [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
debug2: kex_parse_kexinit: reserved 0 [preauth]
debug2: kex_parse_kexinit:
ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
[preauth]
debug2: kex_parse_kexinit:
ecdsa-sha2-nistp256-cert-v01-at-openssh-dot-com,ecdsa-sha2-nistp384-cert-v01-at-openssh-dot-com,ecdsa-sha2-nistp521-cert-v01-at-openssh-dot-com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-rsa-cert-v01-at-openssh-dot-com,ssh-dss-cert-v01-at-openssh-dot-com,ssh-rsa-cert-v00-at-openssh-dot-com,ssh-dss-cert-v00-at-openssh-dot-com,ssh-rsa,ssh-dss
[preauth]
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm-at-openssh-dot-com,aes256-gcm-at-openssh-dot-com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc-at-lysator.liu.se
[preauth]
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm-at-openssh-dot-com,aes256-gcm-at-openssh-dot-com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc-at-lysator.liu.se
[preauth]
debug2: kex_parse_kexinit:
hmac-md5-etm-at-openssh-dot-com,hmac-sha1-etm-at-openssh-dot-com,umac-64-etm-at-openssh-dot-com,umac-128-etm-at-openssh-dot-com,hmac-sha2-256-etm-at-openssh-dot-com,hmac-sha2-512-etm-at-openssh-dot-com,hmac-ripemd160-etm-at-openssh-dot-com,hmac-sha1-96-etm-at-openssh-dot-com,hmac-md5-96-etm-at-openssh-dot-com,hmac-md5,hmac-sha1,umac-64-at-openssh-dot-com,umac-128-at-openssh-dot-com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160-at-openssh-dot-com,hmac-sha1-96,hmac-md5-96
[preauth]
debug2: kex_parse_kexinit:
hmac-md5-etm-at-openssh-dot-com,hmac-sha1-etm-at-openssh-dot-com,umac-64-etm-at-openssh-dot-com,umac-128-etm-at-openssh-dot-com,hmac-sha2-256-etm-at-openssh-dot-com,hmac-sha2-512-etm-at-openssh-dot-com,hmac-ripemd160-etm-at-openssh-dot-com,hmac-sha1-96-etm-at-openssh-dot-com,hmac-md5-96-etm-at-openssh-dot-com,hmac-md5,hmac-sha1,umac-64-at-openssh-dot-com,umac-128-at-openssh-dot-com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160-at-openssh-dot-com,hmac-sha1-96,hmac-md5-96
[preauth]
debug2: kex_parse_kexinit: none,zlib-at-openssh-dot-com,zlib [preauth]
debug2: kex_parse_kexinit: none,zlib-at-openssh-dot-com,zlib [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
debug2: kex_parse_kexinit: reserved 0 [preauth]
debug2: mac_setup: found hmac-md5-etm-at-openssh-dot-com [preauth]
debug1: kex: client->server aes128-ctr hmac-md5-etm-at-openssh-dot-com
none [preauth]
debug2: mac_setup: found hmac-md5-etm-at-openssh-dot-com [preauth]
debug1: kex: server->client aes128-ctr hmac-md5-etm-at-openssh-dot-com
none [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug3: mm_key_sign entering [preauth]
debug3: mm_request_send entering: type 6 [preauth]
debug3: mm_key_sign: waiting for MONITOR_ANS_SIGN [preauth]
debug3: mm_request_receive_expect entering: type 7 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 6
debug3: mm_answer_sign
debug3: mm_answer_sign: signature 0x20060438(101)
debug3: mm_request_send entering: type 7
debug2: monitor_read: 6 used once, disabling now
debug2: kex_derive_keys [preauth]
debug2: set_newkeys: mode 1 [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug2: set_newkeys: mode 0 [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user sftp_user service ssh-connection
method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug3: mm_getpwnamallow entering [preauth]
debug3: mm_request_send entering: type 8 [preauth]
debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM [preauth]
debug3: mm_request_receive_expect entering: type 9 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 8
debug3: mm_answer_pwnamallow
debug3: Trying to reverse map address 127.0.0.1.
Address 127.0.0.1 maps to SERVER-SSHD-BROKE, but this does not map
back to the address - POSSIBLE BREAK-IN ATTEMPT!
debug2: parse_server_config: config reprocess config len 350
debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
debug3: mm_request_send entering: type 9
debug2: monitor_read: 8 used once, disabling now
debug2: input_userauth_request: setting up authctxt for sftp_user [preauth]
debug3: mm_inform_authserv entering [preauth]
debug3: mm_request_send entering: type 4 [preauth]
debug2: input_userauth_request: try method none [preauth]
debug3: userauth_finish: failure partial=0 next
methods="publickey,keyboard-interactive" [preauth]
debug1: userauth-request for user sftp_user service ssh-connection
method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug2: input_userauth_request: try method publickey [preauth]
debug1: test whether pkalg/pkblob are acceptable [preauth]
debug3: mm_key_allowed entering [preauth]
debug3: mm_request_send entering: type 22 [preauth]
debug3: mm_key_allowed: waiting for MONITOR_ANS_KEYALLOWED [preauth]
debug3: mm_request_receive_expect entering: type 23 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 4
debug3: mm_answer_authserv: service=ssh-connection, style=
debug2: monitor_read: 4 used once, disabling now
debug3: mm_request_receive entering
debug3: monitor_read: checking request 22
debug3: mm_answer_keyallowed entering
debug3: mm_answer_keyallowed: key_from_blob: 0x2005ebb8
debug1: temporarily_use_uid: 1019/513 (e=1006/513)
seteuid 1019: Operation not permitted
debug1: do_cleanup
debug1: Killing privsep child 1552
---------- Forwarded message ----------
From: Evan Rowley
Date: Mon, Sep 16, 2013 at 4:50 PM
Subject: Re: Fwd: Way to test cyglsa?
To: Andrey Repin
Every day I learn something new. This cygcheck utility produces a lot
of useful information. I've done a diff on the cygcheck for the server
where sshd is working and the server where sshd is not working.
Summary of the diff is as follows:
- A gid 0 root group exists on the server where sshd works. The
gid 0 root group does not exist on the server where sshd does not
work. I went ahead and created this root group on the server where
- The sshd service on the server where sshd doesn't work is
configured in debug mode. The sshd service on the server where sshd
does work is not configured in debug mode, for obvious reasons.
- The cygserver service is configured to run on the server where
sshd isn't working. The cygserver service isn't configured to run on
the server where ssh was working. I remember thinking that cygserver
was necessary for cyglsa to work properly. Also, the server where sshd
is working had sshd working even without cyglsa configured.
-------- SSHD IS NOT WORKING --------
Cygwin Configuration Diagnostics
Current System Time: Mon Sep 16 21:21:11 2013
Windows 2003 Server Ver 5.2 Build 3790 Service Pack 2
Running in Terminal Service session
Path: C:\cygwin\usr\local\bin
C:\cygwin\bin
D:\oracle\11.2.0\dbhome\bin
D:\oracle\11.2.0\dbhome\OPatch
C:\Perl\bin
C:\WINDOWS\system32
C:\WINDOWS
C:\WINDOWS\System32\Wbem
C:\WINDOWS\system32\WindowsPowerShell\v1.0
C:\Program Files\Windows Imaging
Output from C:\cygwin\bin\id.exe
UID: 500(Administrator) GID: 513(None)
513(None) 544(Administrators) 545(Users)
1003(ora_dba)
SysDir: C:\WINDOWS\system32
WinDir: C:\WINDOWS
USER = 'Administrator'
PWD = '/home/Administrator'
HOME = '/home/Administrator'
HOMEPATH = '\Documents and Settings\Administrator'
MANPATH = '/usr/local/man:/usr/share/man:/usr/man:'
APPDATA = 'C:\Documents and Settings\Administrator\Application Data'
HOSTNAME = 'SERVER-SSHD-BROKE'
SHELL = '/bin/bash'
TERM = 'xterm'
PROCESSOR_IDENTIFIER = 'x86 Family 6 Model 44 Stepping 2, GenuineIntel'
WINDIR = 'C:\WINDOWS'
PERL5LIB = 'D:\oracle\ora10g\sysman\admin\scripts;'
OLDPWD = '/cygdrive/c/Documents and Settings/Administrator/Desktop'
USERDOMAIN = 'SERVER-SSHD-BROKE'
UATDATA = 'C:\WINDOWS\system32\CCM\UATData\D9F8C395-CAB8-491d-B8AC-179A1FE1BE77'
OS = 'Windows_NT'
ALLUSERSPROFILE = 'C:\Documents and Settings\All Users'
temp = 'C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\3'
COMMONPROGRAMFILES = 'C:\Program Files\Common Files'
TMP = '/tmp'
USERNAME = 'Administrator'
ClusterLog = 'C:\WINDOWS\Cluster\cluster.log'
PROCESSOR_LEVEL = '6'
FP_NO_HOST_CHECK = 'NO'
SYSTEMDRIVE = 'C:'
LANG = 'en_US.UTF-8'
USERPROFILE = 'C:\Documents and Settings\Administrator'
CLIENTNAME = 'MY-LAPTOP'
TZ = 'America/New_York'
PS1 = '\[\e]0;\w\a\]\n\[\e[32m\]\u@\h \[\e[33m\]\w\[\e[0m\]\n\$ '
LOGONSERVER = '\\SERVER-SSHD-BROKE'
PROCESSOR_ARCHITECTURE = 'x86'
SHLVL = '1'
PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1'
HOMEDRIVE = 'C:'
COMSPEC = 'C:\WINDOWS\system32\cmd.exe'
SYSTEMROOT = 'C:\WINDOWS'
PRINTER = 'Microsoft XPS Document Writer'
PROCESSOR_REVISION = '2c02'
INFOPATH = '/usr/local/info:/usr/share/info:/usr/info:'
PROGRAMFILES = 'C:\Program Files'
NUMBER_OF_PROCESSORS = '1'
ORACLE_HOME = 'D:\oracle\11.2.0\dbhome'
SESSIONNAME = 'RDP-Tcp#5'
COMPUTERNAME = 'SERVER-SSHD-BROKE'
_ = '/usr/bin/cygcheck'
HKEY_CURRENT_USER\Software\Cygwin
HKEY_CURRENT_USER\Software\Cygwin\Program Options
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start
Menu2\Programs\Cygwin
(default) = (unsupported type)
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\ZoneMap\EscDomains\cygwin.com
(default) = 0x00000002
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Installations
(default) = '\??\C:\cygwin'
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Program Options
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\setup
(default) = 'C:\cygwin'
obcaseinsensitive set to 1
Cygwin installations found in the registry:
System: Key: c5e39b7a9d22bafb Path: C:\cygwin
a: fd N/A N/A
c: hd NTFS 76791Mb 21% CP CS UN PA FC
d: hd NTFS 153597Mb 56% CP CS UN PA FC New Volume
g: hd NTFS 102398Mb 62% CP CS UN PA FC New Volume
r: hd NTFS 262138Mb 25% CP CS UN PA FC Recovery
z: cd N/A N/A
C:\cygwin / system binary,auto
C:\cygwin\bin /usr/bin system binary,auto
C:\cygwin\lib /usr/lib system binary,auto
cygdrive prefix /cygdrive user binary,posix=0,auto
Found: C:\cygwin\bin\awk
-> C:\cygwin\bin\gawk.exe
Found: C:\cygwin\bin\bash.exe
Found: C:\cygwin\bin\cat.exe
Found: C:\cygwin\bin\cp.exe
Not Found: cpp (good!)
Not Found: crontab
Found: C:\cygwin\bin\find.exe
Found: C:\WINDOWS\system32\find.exe
Warning: C:\cygwin\bin\find.exe hides C:\WINDOWS\system32\find.exe
Not Found: gcc
Not Found: gdb
Found: C:\cygwin\bin\grep.exe
Found: C:\cygwin\bin\kill.exe
Not Found: ld
Found: C:\cygwin\bin\ls.exe
Not Found: make
Found: C:\cygwin\bin\mv.exe
Not Found: patch
Found: C:\Perl\bin\perl.exe
Found: C:\Perl\bin\perl
Warning: C:\Perl\bin\perl.exe hides C:\Perl\bin\perl
Found: C:\cygwin\bin\rm.exe
Found: C:\cygwin\bin\sed.exe
Found: C:\cygwin\bin\ssh.exe
Found: C:\cygwin\bin\sh.exe
Found: C:\cygwin\bin\tar.exe
Found: C:\cygwin\bin\test.exe
Found: C:\cygwin\bin\vi.exe
Not Found: vim
449k 2013/01/01 C:\cygwin\bin\cygasn1-8.dll - os=4.0 img=1.0 sys=4.0
"cygasn1-8.dll" v0.0 ts=2013-01-01 06:34
14k 2012/05/04 C:\cygwin\bin\cygattr-1.dll - os=4.0 img=1.0 sys=4.0
"cygattr-1.dll" v0.0 ts=2012-05-04 12:35
62k 2011/05/21 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0
"cygbz2-1.dll" v0.0 ts=2011-05-21 20:16
10k 2013/03/11 C:\cygwin\bin\cygcom_err-2.dll - os=4.0 img=1.0 sys=4.0
"cygcom_err-2.dll" v0.0 ts=2013-03-11 03:04
7k 2012/05/07 C:\cygwin\bin\cygcrypt-0.dll - os=4.0 img=1.0 sys=4.0
"cygcrypt-0.dll" v0.0 ts=2012-05-07 12:18
1518k 2013/02/12 C:\cygwin\bin\cygcrypto-1.0.0.dll - os=4.0 img=1.0 sys=4.0
"cygcrypto-1.0.0.dll" v0.0 ts=2013-02-12 14:44
140k 2012/05/03 C:\cygwin\bin\cygedit-0.dll - os=4.0 img=1.0 sys=4.0
"cygedit-0.dll" v0.0 ts=2012-05-03 18:12
43k 2010/01/02 C:\cygwin\bin\cygform-10.dll - os=4.0 img=1.0 sys=4.0
"cygform-10.dll" v0.0 ts=2010-01-02 14:49
47k 2010/01/02 C:\cygwin\bin\cygformw-10.dll - os=4.0 img=1.0 sys=4.0
"cygformw-10.dll" v0.0 ts=2010-01-02 17:31
103k 2013/06/16 C:\cygwin\bin\cyggcc_s-1.dll - os=4.0 img=1.0 sys=4.0
"cyggcc_s-1.dll" v0.0 ts=2013-06-16 04:33
452k 2013/08/04 C:\cygwin\bin\cyggmp-10.dll - os=4.0 img=1.0 sys=4.0
"cyggmp-10.dll" v0.0 ts=2013-08-04 22:28
317k 2011/07/31 C:\cygwin\bin\cyggmp-3.dll - os=4.0 img=1.0 sys=4.0
"cyggmp-3.dll" v0.0 ts=2011-07-31 06:14
180k 2013/01/01 C:\cygwin\bin\cyggssapi-3.dll - os=4.0 img=1.0 sys=4.0
"cyggssapi-3.dll" v0.0 ts=2013-01-01 06:58
11k 2013/01/01 C:\cygwin\bin\cygheimbase-1.dll - os=4.0 img=1.0 sys=4.0
"cygheimbase-1.dll" v0.0 ts=2013-01-01 06:31
20k 2013/01/01 C:\cygwin\bin\cygheimntlm-0.dll - os=4.0 img=1.0 sys=4.0
"cygheimntlm-0.dll" v0.0 ts=2013-01-01 06:49
25k 2012/05/04 C:\cygwin\bin\cyghistory7.dll - os=4.0 img=1.0 sys=4.0
"cyghistory7.dll" v0.0 ts=2012-05-04 22:07
211k 2013/01/01 C:\cygwin\bin\cyghx509-5.dll - os=4.0 img=1.0 sys=4.0
"cyghx509-5.dll" v0.0 ts=2013-01-01 06:37
985k 2011/10/16 C:\cygwin\bin\cygiconv-2.dll - os=4.0 img=1.0 sys=4.0
"cygiconv-2.dll" v0.0 ts=2011-10-16 18:01
35k 2011/10/16 C:\cygwin\bin\cygintl-8.dll - os=4.0 img=1.0 sys=4.0
"cygintl-8.dll" v0.0 ts=2011-10-16 06:38
21k 2013/01/01 C:\cygwin\bin\cygkafs-0.dll - os=4.0 img=1.0 sys=4.0
"cygkafs-0.dll" v0.0 ts=2013-01-01 06:50
373k 2013/01/01 C:\cygwin\bin\cygkrb5-26.dll - os=4.0 img=1.0 sys=4.0
"cygkrb5-26.dll" v0.0 ts=2013-01-01 06:43
5k 2013/08/31 C:\cygwin\bin\cyglsa.dll - os=4.0 img=1.0 sys=4.0
"cyglsa.dll" v0.0 ts=2013-08-31 19:39
6k 2013/08/31 C:\cygwin\bin\cyglsa64.dll (not x86 dll)
123k 2011/05/19 C:\cygwin\bin\cyglzma-5.dll - os=4.0 img=1.0 sys=4.0
"cyglzma-5.dll" v0.0 ts=2011-05-19 03:41
94k 2012/04/22 C:\cygwin\bin\cygmagic-1.dll - os=4.0 img=1.0 sys=4.0
"cygmagic-1.dll" v0.0 ts=2012-04-22 19:09
25k 2010/01/02 C:\cygwin\bin\cygmenu-10.dll - os=4.0 img=1.0 sys=4.0
"cygmenu-10.dll" v0.0 ts=2010-01-02 14:48
25k 2010/01/02 C:\cygwin\bin\cygmenuw-10.dll - os=4.0 img=1.0 sys=4.0
"cygmenuw-10.dll" v0.0 ts=2010-01-02 17:30
213k 2011/07/31 C:\cygwin\bin\cygmp-3.dll - os=4.0 img=1.0 sys=4.0
"cygmp-3.dll" v0.0 ts=2011-07-31 06:12
344k 2013/04/11 C:\cygwin\bin\cygmpfr-4.dll - os=4.0 img=1.0 sys=4.0
"cygmpfr-4.dll" v0.0 ts=2013-04-11 19:07
63k 2010/01/02 C:\cygwin\bin\cygncurses++-10.dll - os=4.0 img=1.0 sys=4.0
"cygncurses++-10.dll" v0.0 ts=2010-01-02 15:00
63k 2010/01/02 C:\cygwin\bin\cygncurses++w-10.dll - os=4.0 img=1.0 sys=4.0
"cygncurses++w-10.dll" v0.0 ts=2010-01-02 17:41
195k 2010/01/02 C:\cygwin\bin\cygncurses-10.dll - os=4.0 img=1.0 sys=4.0
"cygncurses-10.dll" v0.0 ts=2010-01-02 14:45
244k 2010/01/02 C:\cygwin\bin\cygncursesw-10.dll - os=4.0 img=1.0 sys=4.0
"cygncursesw-10.dll" v0.0 ts=2010-01-02 17:28
13k 2010/01/02 C:\cygwin\bin\cygpanel-10.dll - os=4.0 img=1.0 sys=4.0
"cygpanel-10.dll" v0.0 ts=2010-01-02 14:47
13k 2010/01/02 C:\cygwin\bin\cygpanelw-10.dll - os=4.0 img=1.0 sys=4.0
"cygpanelw-10.dll" v0.0 ts=2010-01-02 16:30
255k 2012/02/10 C:\cygwin\bin\cygpcre-0.dll - os=4.0 img=1.0 sys=4.0
"cygpcre-0.dll" v0.0 ts=2012-02-10 10:24
22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0
"cygpopt-0.dll" v0.0 ts=2002-06-09 06:45
162k 2012/05/04 C:\cygwin\bin\cygreadline7.dll - os=4.0 img=1.0 sys=4.0
"cygreadline7.dll" v0.0 ts=2012-05-04 22:07
51k 2013/01/01 C:\cygwin\bin\cygroken-18.dll - os=4.0 img=1.0 sys=4.0
"cygroken-18.dll" v0.0 ts=2013-01-01 06:32
588k 2013/06/10 C:\cygwin\bin\cygsqlite3-0.dll - os=4.0 img=1.0 sys=4.0
"cygsqlite3-0.dll" v0.0 ts=2013-06-10 20:46
366k 2013/02/12 C:\cygwin\bin\cygssl-1.0.0.dll - os=4.0 img=1.0 sys=4.0
"cygssl-1.0.0.dll" v0.0 ts=2013-02-12 14:44
10k 2013/06/16 C:\cygwin\bin\cygssp-0.dll - os=4.0 img=1.0 sys=4.0
"cygssp-0.dll" v0.0 ts=2013-06-16 04:42
878k 2013/06/16 C:\cygwin\bin\cygstdc++-6.dll - os=4.0 img=1.0 sys=4.0
"cygstdc++-6.dll" v0.0 ts=2013-06-15 14:07
48k 2010/01/02 C:\cygwin\bin\cygtic-10.dll - os=4.0 img=1.0 sys=4.0
"cygtic-10.dll" v0.0 ts=2010-01-02 14:45
48k 2010/01/02 C:\cygwin\bin\cygticw-10.dll - os=4.0 img=1.0 sys=4.0
"cygticw-10.dll" v0.0 ts=2010-01-02 17:28
157k 2013/01/01 C:\cygwin\bin\cygwind-0.dll - os=4.0 img=1.0 sys=4.0
"cygwind-0.dll" v0.0 ts=2013-01-01 06:33
28k 2010/03/28 C:\cygwin\bin\cygwrap-0.dll - os=4.0 img=1.0 sys=4.0
"cygwrap-0.dll" v0.0 ts=2010-03-28 10:02
73k 2013/05/09 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0
"cygz.dll" v0.0 ts=2013-05-09 22:21
3042k 2013/08/31 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2013-08-31 19:40
Cygwin DLL version info:
DLL version: 1.7.25
DLL epoch: 19
DLL old termios: 5
DLL malloc env: 28
Cygwin conv: 181
API major: 0
API minor: 270
Shared data: 5
DLL identifier: cygwin1
Mount registry: 3
Cygwin registry name: Cygwin
Program options name: Program Options
Installations name: Installations
Cygdrive default prefix:
Build date:
Shared id: cygwin1S5
Service : cygserver
Display name : CYGWIN cygserver
Current State : Running
Controls Accepted : Stop
Command : /usr/sbin/cygserver
stdin path : /dev/null
stdout path : /var/log/cygserver.log
stderr path : /var/log/cygserver.log
Process Type : Own Process
Startup : Automatic
Account : LocalSystem
Service : sshd
Display name : CYGWIN sshd
Current State : Stopped
Command : /usr/sbin/sshd -D -d
stdin path : /dev/null
stdout path : /var/log/sshd.log
stderr path : /var/log/sshd.log
Process Type : Own Process
Startup : Automatic
Dependencies : tcpip
Account : .\cyg_server
Cygwin Package Information
Last downloaded files to: C:\cygwinsetup
Last downloaded files from: http://cygwin.cybermirror.org/
Package Version Status
alternatives 1.3.30c-10 OK
base-cygwin 3.3-1 OK
base-files 4.1-1 OK
bash 4.1.10-4 OK
bzip2 1.0.6-2 OK
coreutils 8.15-1 OK
crypt 1.2-1 OK
csih 0.9.7-1 OK
cygrunsrv 1.40-2 OK
cygutils 1.4.14-1 OK
cygwin 1.7.25-1 OK
dash 0.5.7-1 OK
diffutils 3.2-1 OK
dos2unix 6.0.3-1 OK
editrights 1.01-2 OK
file 5.11-1 OK
findutils 4.5.11-1 OK
gawk 4.1.0-1 OK
gettext 0.18.1.1-2 OK
grep 2.6.3-1 OK
groff 1.21-2 OK
gzip 1.4-1 OK
ipc-utils 1.0-1 OK
less 444-1 OK
libasn1_8 1.5.2-4 OK
libattr1 2.4.46-1 OK
libbz2_1 1.0.6-2 OK
libcom_err2 1.42.7-1 OK
libedit0 20120311-1 OK
libgcc1 4.7.3-1 OK
libgmp10 5.1.2-1 OK
libgmp3 4.3.2-1 OK
libgssapi3 1.5.2-4 OK
libheimbase1 1.5.2-4 OK
libheimntlm0 1.5.2-4 OK
libhx509_5 1.5.2-4 OK
libiconv2 1.14-2 OK
libintl8 0.18.1.1-2 OK
libkafs0 1.5.2-4 OK
libkrb5_26 1.5.2-4 OK
liblzma5 5.0.2_20110517-1 OK
libmpfr4 3.1.2-1 OK
libncurses10 5.7-18 OK
libncursesw10 5.7-18 OK
libopenssl100 1.0.1e-2 OK
libpcre0 8.21-2 OK
libpopt0 1.6.4-4 OK
libreadline7 6.1.2-3 OK
libroken18 1.5.2-4 OK
libsqlite3_0 3.7.17-3 OK
libssp0 4.7.3-1 OK
libstdc++6 4.7.3-1 OK
libwind0 1.5.2-4 OK
libwrap0 7.6-21 OK
login 1.10-10 OK
man 1.6g-2 OK
mintty 1.1.3-1 OK
openssh 6.2p2-1 OK
rebase 4.4.0-1 OK
run 1.3.0-1 OK
sed 4.2.2-3 OK
tar 1.26-1 OK
terminfo 5.7_20091114-14 OK
tzcode 2013c-1 OK
vim-minimal 7.3.1152-1 OK
which 2.20-2 OK
xz 5.0.2_20110517-1 OK
zlib0 1.2.8-1 OK
Use -h to see help about each section
-------- SSHD IS WORKING :) --------
Cygwin Configuration Diagnostics
Current System Time: Mon Sep 16 21:26:12 2013
Windows 2003 Server Ver 5.2 Build 3790 Service Pack 2
Running in Terminal Service session
Path: C:\cygwin\usr\local\bin
C:\cygwin\bin
D:\oracle\11.2.0\dbhome\bin
D:\oracle\11.2.0\dbhome\Opatch
C:\WINDOWS\system32
C:\WINDOWS
C:\WINDOWS\System32\Wbem
C:\WINDOWS\system32\WindowsPowerShell\v1.0
C:\Program Files\Windows Imaging
Output from C:\cygwin\bin\id.exe
UID: 500(Administrator) GID: 513(None)
513(None) 0(root) 544(Administrators)
545(Users)
SysDir: C:\WINDOWS\system32
WinDir: C:\WINDOWS
USER = 'Administrator'
PWD = '/home/Administrator'
HOME = '/home/Administrator'
HOMEPATH = '\Documents and Settings\Administrator'
MANPATH = '/usr/local/man:/usr/share/man:/usr/man:'
APPDATA = 'C:\Documents and Settings\Administrator\Application Data'
HOSTNAME = 'SERVER-SSHD-WORKS'
SHELL = '/bin/bash'
TERM = 'xterm'
PROCESSOR_IDENTIFIER = 'x86 Family 6 Model 44 Stepping 2, GenuineIntel'
WINDIR = 'C:\WINDOWS'
OLDPWD = '/cygdrive/c/Documents and Settings/Administrator/Desktop'
USERDOMAIN = 'SERVER-SSHD-WORKS'
UATDATA = 'C:\WINDOWS\system32\CCM\UATData\D9F8C395-CAB8-491d-B8AC-179A1FE1BE77'
OS = 'Windows_NT'
ALLUSERSPROFILE = 'C:\Documents and Settings\All Users'
temp = 'C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\2'
COMMONPROGRAMFILES = 'C:\Program Files\Common Files'
TMP = '/tmp'
USERNAME = 'Administrator'
ClusterLog = 'C:\WINDOWS\Cluster\cluster.log'
PROCESSOR_LEVEL = '6'
FP_NO_HOST_CHECK = 'NO'
SYSTEMDRIVE = 'C:'
LANG = 'en_US.UTF-8'
USERPROFILE = 'C:\Documents and Settings\Administrator'
CLIENTNAME = 'MY-LAPTOP'
TZ = 'America/New_York'
PS1 = '\[\e]0;\w\a\]\n\[\e[32m\]\u@\h \[\e[33m\]\w\[\e[0m\]\n\$ '
LOGONSERVER = '\\SERVER-SSHD-WORKS'
PROCESSOR_ARCHITECTURE = 'x86'
SHLVL = '1'
PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1'
HOMEDRIVE = 'C:'
COMSPEC = 'C:\WINDOWS\system32\cmd.exe'
SYSTEMROOT = 'C:\WINDOWS'
PRINTER = 'Microsoft XPS Document Writer'
PROCESSOR_REVISION = '2c02'
INFOPATH = '/usr/local/info:/usr/share/info:/usr/info:'
PROGRAMFILES = 'C:\Program Files'
NUMBER_OF_PROCESSORS = '4'
ORACLE_HOME = 'D:\oracle\11.2.0\dbhome'
SESSIONNAME = 'RDP-Tcp#5'
COMPUTERNAME = 'SERVER-SSHD-WORKS'
_ = '/usr/bin/cygcheck'
HKEY_CURRENT_USER\Software\Cygwin
HKEY_CURRENT_USER\Software\Cygwin\Program Options
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start
Menu\Programs\Cygwin
(default) = (unsupported type)
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Installations
(default) = '\??\C:\cygwin'
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Program Options
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\setup
(default) = 'C:\cygwin'
obcaseinsensitive set to 1
Cygwin installations found in the registry:
System: Key: c5e39b7a9d22bafb Path: C:\cygwin
a: fd N/A N/A
c: hd NTFS 35828Mb 59% CP CS UN PA FC
d: hd NTFS 153597Mb 26% CP CS UN PA FC Data
f: cd N/A N/A
g: hd NTFS 102398Mb 51% CP CS UN PA FC
r: hd NTFS 204797Mb 18% CP CS UN PA FC Recovery
C:\cygwin / system binary,auto
C:\cygwin\bin /usr/bin system binary,auto
C:\cygwin\lib /usr/lib system binary,auto
cygdrive prefix /cygdrive user binary,posix=0,auto
Found: C:\cygwin\bin\awk
-> C:\cygwin\bin\gawk.exe
Found: C:\cygwin\bin\bash.exe
Found: C:\cygwin\bin\cat.exe
Found: C:\cygwin\bin\cp.exe
Not Found: cpp (good!)
Not Found: crontab
Found: C:\cygwin\bin\find.exe
Found: C:\WINDOWS\system32\find.exe
Warning: C:\cygwin\bin\find.exe hides C:\WINDOWS\system32\find.exe
Not Found: gcc
Not Found: gdb
Found: C:\cygwin\bin\grep.exe
Found: C:\cygwin\bin\kill.exe
Not Found: ld
Found: C:\cygwin\bin\ls.exe
Not Found: make
Found: C:\cygwin\bin\mv.exe
Not Found: patch
Not Found: perl
Found: C:\cygwin\bin\rm.exe
Found: C:\cygwin\bin\sed.exe
Found: C:\cygwin\bin\ssh.exe
Found: C:\cygwin\bin\sh.exe
Found: C:\cygwin\bin\tar.exe
Found: C:\cygwin\bin\test.exe
Found: C:\cygwin\bin\vi.exe
Not Found: vim
449k 2013/01/01 C:\cygwin\bin\cygasn1-8.dll - os=4.0 img=1.0 sys=4.0
"cygasn1-8.dll" v0.0 ts=2013-01-01 06:34
14k 2012/05/04 C:\cygwin\bin\cygattr-1.dll - os=4.0 img=1.0 sys=4.0
"cygattr-1.dll" v0.0 ts=2012-05-04 12:35
62k 2011/05/21 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0
"cygbz2-1.dll" v0.0 ts=2011-05-21 20:16
10k 2013/03/11 C:\cygwin\bin\cygcom_err-2.dll - os=4.0 img=1.0 sys=4.0
"cygcom_err-2.dll" v0.0 ts=2013-03-11 03:04
7k 2012/05/07 C:\cygwin\bin\cygcrypt-0.dll - os=4.0 img=1.0 sys=4.0
"cygcrypt-0.dll" v0.0 ts=2012-05-07 12:18
1518k 2013/02/12 C:\cygwin\bin\cygcrypto-1.0.0.dll - os=4.0 img=1.0 sys=4.0
"cygcrypto-1.0.0.dll" v0.0 ts=2013-02-12 14:44
140k 2012/05/03 C:\cygwin\bin\cygedit-0.dll - os=4.0 img=1.0 sys=4.0
"cygedit-0.dll" v0.0 ts=2012-05-03 18:12
43k 2010/01/02 C:\cygwin\bin\cygform-10.dll - os=4.0 img=1.0 sys=4.0
"cygform-10.dll" v0.0 ts=2010-01-02 14:49
47k 2010/01/02 C:\cygwin\bin\cygformw-10.dll - os=4.0 img=1.0 sys=4.0
"cygformw-10.dll" v0.0 ts=2010-01-02 17:31
103k 2013/06/16 C:\cygwin\bin\cyggcc_s-1.dll - os=4.0 img=1.0 sys=4.0
"cyggcc_s-1.dll" v0.0 ts=2013-06-16 04:33
452k 2013/08/04 C:\cygwin\bin\cyggmp-10.dll - os=4.0 img=1.0 sys=4.0
"cyggmp-10.dll" v0.0 ts=2013-08-04 22:28
317k 2011/07/31 C:\cygwin\bin\cyggmp-3.dll - os=4.0 img=1.0 sys=4.0
"cyggmp-3.dll" v0.0 ts=2011-07-31 06:14
180k 2013/01/01 C:\cygwin\bin\cyggssapi-3.dll - os=4.0 img=1.0 sys=4.0
"cyggssapi-3.dll" v0.0 ts=2013-01-01 06:58
11k 2013/01/01 C:\cygwin\bin\cygheimbase-1.dll - os=4.0 img=1.0 sys=4.0
"cygheimbase-1.dll" v0.0 ts=2013-01-01 06:31
20k 2013/01/01 C:\cygwin\bin\cygheimntlm-0.dll - os=4.0 img=1.0 sys=4.0
"cygheimntlm-0.dll" v0.0 ts=2013-01-01 06:49
25k 2012/05/04 C:\cygwin\bin\cyghistory7.dll - os=4.0 img=1.0 sys=4.0
"cyghistory7.dll" v0.0 ts=2012-05-04 22:07
211k 2013/01/01 C:\cygwin\bin\cyghx509-5.dll - os=4.0 img=1.0 sys=4.0
"cyghx509-5.dll" v0.0 ts=2013-01-01 06:37
985k 2011/10/16 C:\cygwin\bin\cygiconv-2.dll - os=4.0 img=1.0 sys=4.0
"cygiconv-2.dll" v0.0 ts=2011-10-16 18:01
35k 2011/10/16 C:\cygwin\bin\cygintl-8.dll - os=4.0 img=1.0 sys=4.0
"cygintl-8.dll" v0.0 ts=2011-10-16 06:38
21k 2013/01/01 C:\cygwin\bin\cygkafs-0.dll - os=4.0 img=1.0 sys=4.0
"cygkafs-0.dll" v0.0 ts=2013-01-01 06:50
373k 2013/01/01 C:\cygwin\bin\cygkrb5-26.dll - os=4.0 img=1.0 sys=4.0
"cygkrb5-26.dll" v0.0 ts=2013-01-01 06:43
5k 2013/08/31 C:\cygwin\bin\cyglsa.dll - os=4.0 img=1.0 sys=4.0
"cyglsa.dll" v0.0 ts=2013-08-31 19:39
6k 2013/08/31 C:\cygwin\bin\cyglsa64.dll (not x86 dll)
123k 2011/05/19 C:\cygwin\bin\cyglzma-5.dll - os=4.0 img=1.0 sys=4.0
"cyglzma-5.dll" v0.0 ts=2011-05-19 03:41
94k 2012/04/22 C:\cygwin\bin\cygmagic-1.dll - os=4.0 img=1.0 sys=4.0
"cygmagic-1.dll" v0.0 ts=2012-04-22 19:09
25k 2010/01/02 C:\cygwin\bin\cygmenu-10.dll - os=4.0 img=1.0 sys=4.0
"cygmenu-10.dll" v0.0 ts=2010-01-02 14:48
25k 2010/01/02 C:\cygwin\bin\cygmenuw-10.dll - os=4.0 img=1.0 sys=4.0
"cygmenuw-10.dll" v0.0 ts=2010-01-02 17:30
213k 2011/07/31 C:\cygwin\bin\cygmp-3.dll - os=4.0 img=1.0 sys=4.0
"cygmp-3.dll" v0.0 ts=2011-07-31 06:12
344k 2013/04/11 C:\cygwin\bin\cygmpfr-4.dll - os=4.0 img=1.0 sys=4.0
"cygmpfr-4.dll" v0.0 ts=2013-04-11 19:07
63k 2010/01/02 C:\cygwin\bin\cygncurses++-10.dll - os=4.0 img=1.0 sys=4.0
"cygncurses++-10.dll" v0.0 ts=2010-01-02 15:00
63k 2010/01/02 C:\cygwin\bin\cygncurses++w-10.dll - os=4.0 img=1.0 sys=4.0
"cygncurses++w-10.dll" v0.0 ts=2010-01-02 17:41
195k 2010/01/02 C:\cygwin\bin\cygncurses-10.dll - os=4.0 img=1.0 sys=4.0
"cygncurses-10.dll" v0.0 ts=2010-01-02 14:45
244k 2010/01/02 C:\cygwin\bin\cygncursesw-10.dll - os=4.0 img=1.0 sys=4.0
"cygncursesw-10.dll" v0.0 ts=2010-01-02 17:28
13k 2010/01/02 C:\cygwin\bin\cygpanel-10.dll - os=4.0 img=1.0 sys=4.0
"cygpanel-10.dll" v0.0 ts=2010-01-02 14:47
13k 2010/01/02 C:\cygwin\bin\cygpanelw-10.dll - os=4.0 img=1.0 sys=4.0
"cygpanelw-10.dll" v0.0 ts=2010-01-02 16:30
255k 2012/02/10 C:\cygwin\bin\cygpcre-0.dll - os=4.0 img=1.0 sys=4.0
"cygpcre-0.dll" v0.0 ts=2012-02-10 10:24
22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0
"cygpopt-0.dll" v0.0 ts=2002-06-09 06:45
162k 2012/05/04 C:\cygwin\bin\cygreadline7.dll - os=4.0 img=1.0 sys=4.0
"cygreadline7.dll" v0.0 ts=2012-05-04 22:07
51k 2013/01/01 C:\cygwin\bin\cygroken-18.dll - os=4.0 img=1.0 sys=4.0
"cygroken-18.dll" v0.0 ts=2013-01-01 06:32
588k 2013/06/10 C:\cygwin\bin\cygsqlite3-0.dll - os=4.0 img=1.0 sys=4.0
"cygsqlite3-0.dll" v0.0 ts=2013-06-10 20:46
366k 2013/02/12 C:\cygwin\bin\cygssl-1.0.0.dll - os=4.0 img=1.0 sys=4.0
"cygssl-1.0.0.dll" v0.0 ts=2013-02-12 14:44
10k 2013/06/16 C:\cygwin\bin\cygssp-0.dll - os=4.0 img=1.0 sys=4.0
"cygssp-0.dll" v0.0 ts=2013-06-16 04:42
878k 2013/06/16 C:\cygwin\bin\cygstdc++-6.dll - os=4.0 img=1.0 sys=4.0
"cygstdc++-6.dll" v0.0 ts=2013-06-15 14:07
48k 2010/01/02 C:\cygwin\bin\cygtic-10.dll - os=4.0 img=1.0 sys=4.0
"cygtic-10.dll" v0.0 ts=2010-01-02 14:45
48k 2010/01/02 C:\cygwin\bin\cygticw-10.dll - os=4.0 img=1.0 sys=4.0
"cygticw-10.dll" v0.0 ts=2010-01-02 17:28
157k 2013/01/01 C:\cygwin\bin\cygwind-0.dll - os=4.0 img=1.0 sys=4.0
"cygwind-0.dll" v0.0 ts=2013-01-01 06:33
28k 2010/03/28 C:\cygwin\bin\cygwrap-0.dll - os=4.0 img=1.0 sys=4.0
"cygwrap-0.dll" v0.0 ts=2010-03-28 10:02
73k 2013/05/09 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0
"cygz.dll" v0.0 ts=2013-05-09 22:21
3042k 2013/08/31 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2013-08-31 19:40
Cygwin DLL version info:
DLL version: 1.7.25
DLL epoch: 19
DLL old termios: 5
DLL malloc env: 28
Cygwin conv: 181
API major: 0
API minor: 270
Shared data: 5
DLL identifier: cygwin1
Mount registry: 3
Cygwin registry name: Cygwin
Program options name: Program Options
Installations name: Installations
Cygdrive default prefix:
Build date:
Shared id: cygwin1S5
Service : sshd
Display name : CYGWIN sshd
Current State : Running
Controls Accepted : Stop
Command : /usr/sbin/sshd -D
stdin path : /dev/null
stdout path : /var/log/sshd.log
stderr path : /var/log/sshd.log
Environment : CYGWIN="ntsec"
Process Type : Own Process
Startup : Automatic
Dependencies : tcpip
Account : .\cyg_server
Cygwin Package Information
Last downloaded files to: C:\cygwinsetup
Last downloaded files from: ftp://mirrors.kernel.org/sourceware/cygwin/
Package Version Status
_autorebase 000398-1 OK
_update-info-dir 01184-1 OK
alternatives 1.3.30c-10 OK
base-cygwin 3.3-1 OK
base-files 4.1-1 OK
bash 4.1.10-4 OK
bzip2 1.0.6-2 OK
coreutils 8.15-1 OK
crypt 1.2-1 OK
csih 0.9.7-1 OK
cygrunsrv 1.40-2 OK
cygutils 1.4.14-1 OK
cygwin 1.7.25-1 OK
dash 0.5.7-1 OK
diffutils 3.2-1 OK
dos2unix 6.0.3-1 OK
editrights 1.01-2 OK
file 5.11-1 OK
findutils 4.5.11-1 OK
gawk 4.1.0-1 OK
gettext 0.18.1.1-2 OK
grep 2.6.3-1 OK
groff 1.21-2 OK
gzip 1.4-1 OK
ipc-utils 1.0-1 OK
less 444-1 OK
libasn1_8 1.5.2-4 OK
libattr1 2.4.46-1 OK
libbz2_1 1.0.6-2 OK
libcom_err2 1.42.7-1 OK
libedit0 20120311-1 OK
libgcc1 4.7.3-1 OK
libgmp10 5.1.2-1 OK
libgmp3 4.3.2-1 OK
libgssapi3 1.5.2-4 OK
libheimbase1 1.5.2-4 OK
libheimntlm0 1.5.2-4 OK
libhx509_5 1.5.2-4 OK
libiconv2 1.14-2 OK
libintl8 0.18.1.1-2 OK
libkafs0 1.5.2-4 OK
libkrb5_26 1.5.2-4 OK
liblzma5 5.0.2_20110517-1 OK
libmpfr4 3.1.2-1 OK
libncurses10 5.7-18 OK
libncursesw10 5.7-18 OK
libopenssl100 1.0.1e-2 OK
libpcre0 8.21-2 OK
libpopt0 1.6.4-4 OK
libreadline7 6.1.2-3 OK
libroken18 1.5.2-4 OK
libsqlite3_0 3.7.17-3 OK
libssp0 4.7.3-1 OK
libstdc++6 4.7.3-1 OK
libwind0 1.5.2-4 OK
libwrap0 7.6-21 OK
login 1.10-10 OK
man 1.6g-2 OK
mintty 1.1.3-1 OK
openssh 6.2p2-1 OK
rebase 4.4.0-1 OK
run 1.3.0-1 OK
sed 4.2.2-3 OK
tar 1.26-1 OK
terminfo 5.7_20091114-14 OK
texinfo 4.13-4 OK
tzcode 2013c-1 OK
vim-minimal 7.3.1152-1 OK
which 2.20-2 OK
xz 5.0.2_20110517-1 OK
zlib0 1.2.8-1 OK
Use -h to see help about each section
--
- EJR
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: seteuid 1019: Operation not permitted
2013-09-17 19:36 seteuid 1019: Operation not permitted Evan Rowley
@ 2013-09-20 13:35 ` Larry Hall (Cygwin)
2014-02-16 2:12 ` Evan Rowley
1 sibling, 0 replies; 4+ messages in thread
From: Larry Hall (Cygwin) @ 2013-09-20 13:35 UTC (permalink / raw)
To: cygwin
On 9/17/2013 3:02 PM, Evan Rowley wrote:
> Hi Guys
>
> I have the debug logs of an sshd that terminated connections when it
> recieves the following error:
>
> seteuid 1019: Operation not permitted
<snip>
Perhaps this thread helps?
<http://cygwin.com/ml/cygwin/2012-08/msg00028.html>
Ignore the stuff about getting a snapshot. That's old data. The changes
you need in the DLL are already in the version you have.
--
Larry
_____________________________________________________________________
A: Yes.
> Q: Are you sure?
>> A: Because it reverses the logical flow of conversation.
>>> Q: Why is top posting annoying in email?
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: seteuid 1019: Operation not permitted
2013-09-17 19:36 seteuid 1019: Operation not permitted Evan Rowley
2013-09-20 13:35 ` Larry Hall (Cygwin)
@ 2014-02-16 2:12 ` Evan Rowley
2014-02-16 6:05 ` Larry Hall (Cygwin)
1 sibling, 1 reply; 4+ messages in thread
From: Evan Rowley @ 2014-02-16 2:12 UTC (permalink / raw)
To: Andrey Repin
Everyone!
I finally figured out what the problem was here.
A group policy was in effect on the Windows machine. The group policy
is supposed to enforce the baseline security configuration as defined
by the Center for Internet Security (CIS) Benchmark for Windows
Servers. One particular Local User Security Policy setting was
disabled. It was "act as part of the operating system" - apparently
this is needed in order for SSHD in Cygwin to work.
I was willing to work with the AD admins to pick of the different
configuration settings in a granular fashion, but to keep things
simple they just took the entire group policy off of the machine.
After doing this sshd logins started working.
Thanks a bunch to all who initially worked with me on this.
On Tue, Sep 17, 2013 at 3:02 PM, Evan Rowley <rowley.evan@gmail.com> wrote:
> Hi Guys
>
> I have the debug logs of an sshd that terminated connections when it
> recieves the following error:
>
> seteuid 1019: Operation not permitted
>
> This server is setup with most of the defualts needed to run sshd.
> There is a cyg_server user as set up by the ssh-host-config script and
> cyglsa-config has been run too. I've set up cyglsa and ssh-host-config
> with the appropriate passwords for the users. Still, I'm having errors
> related to seteuid.
>
> I have another sever where sshd is working just fine. In fact, that
> server was a year-old clone of the server where sshd is not working.
> One difference I noticed in the overall configuration of both servers
> is that on the server where sshd works, a root group was created
> during the cygwin install with gid 0. Not by me, but auto-magically.
>
> If I reinstall and reconfigure everything on these two servers, the
> outcome is always the same. The respective cygcheck for each server
> can be found at the bottom of this email. This is a continuation of a
> topic "Way to test cyglsa?" where Larry Hall was helping me.
>
> Note that early in the sshd logs is a mention of permissions and
> /var/empty. Even with cyg_server owning the file and 700 permissions
> the same seteuid problem occurs.
>
> debug2: load_server_config: filename /etc/sshd_config
> debug2: load_server_config: done config len = 350
> debug2: parse_server_config: config /etc/sshd_config len 350
> debug3: /etc/sshd_config:13 setting Port 22
> debug3: /etc/sshd_config:41 setting StrictModes no
> debug3: /etc/sshd_config:45 setting RSAAuthentication yes
> debug3: /etc/sshd_config:46 setting PubkeyAuthentication yes
> debug3: /etc/sshd_config:50 setting AuthorizedKeysFile .ssh/authorized_keys
> debug3: /etc/sshd_config:68 setting PasswordAuthentication no
> debug3: /etc/sshd_config:69 setting PermitEmptyPasswords yes
> debug3: /etc/sshd_config:105 setting UsePrivilegeSeparation sandbox
> debug3: /etc/sshd_config:121 setting Subsystem sftp /usr/sbin/sftp-server
> debug1: sshd version OpenSSH_6.2, OpenSSL 1.0.1e 11 Feb 2013
> debug3: Incorrect RSA1 identifier
> debug1: read PEM private key done: type RSA
> debug1: private host key: #0 type 1 RSA
> debug3: Incorrect RSA1 identifier
> debug1: read PEM private key done: type DSA
> debug1: private host key: #1 type 2 DSA
> debug3: Incorrect RSA1 identifier
> debug1: read PEM private key done: type ECDSA
> debug1: private host key: #2 type 3 ECDSA
> debug1: rexec_argv[0]='/usr/sbin/sshd'
> debug1: rexec_argv[1]='-D'
> debug1: rexec_argv[2]='-ddd'
> debug2: fd 3 setting O_NONBLOCK
> debug1: Bind to port 22 on 0.0.0.0.
> Server listening on 0.0.0.0 port 22.
> debug1: fd 4 clearing O_NONBLOCK
> debug1: Server will not fork when running in debugging mode.
> debug3: send_rexec_state: entering fd = 7 config len 350
> debug3: ssh_msg_send: type 0
> debug3: send_rexec_state: done
> debug1: rexec start in 4 out 4 newsock 4 pipe -1 sock 7
> debug1: inetd sockets after dupping: 3, 3
> Connection from 127.0.0.1 port 3429
> debug1: Client protocol version 2.0; client software version OpenSSH_6.2
> debug1: match: OpenSSH_6.2 pat OpenSSH*
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_6.2
> debug2: fd 3 setting O_NONBLOCK
> debug3: ssh_sandbox_init: preparing rlimit sandbox
> debug2: Network child is on pid 1552
> debug3: preauth child monitor started
> debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
> debug1: SSH2_MSG_KEXINIT sent [preauth]
> debug1: SSH2_MSG_KEXINIT received [preauth]
> debug2: kex_parse_kexinit:
> ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
> [preauth]
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
> debug2: kex_parse_kexinit:
> aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm-at-openssh-dot-com,aes256-gcm-at-openssh-dot-com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc-at-lysator.liu.se
> [preauth]
> debug2: kex_parse_kexinit:
> aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm-at-openssh-dot-com,aes256-gcm-at-openssh-dot-com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc-at-lysator.liu.se
> [preauth]
> debug2: kex_parse_kexinit:
> hmac-md5-etm-at-openssh-dot-com,hmac-sha1-etm-at-openssh-dot-com,umac-64-etm-at-openssh-dot-com,umac-128-etm-at-openssh-dot-com,hmac-sha2-256-etm-at-openssh-dot-com,hmac-sha2-512-etm-at-openssh-dot-com,hmac-ripemd160-etm-at-openssh-dot-com,hmac-sha1-96-etm-at-openssh-dot-com,hmac-md5-96-etm-at-openssh-dot-com,hmac-md5,hmac-sha1,umac-64-at-openssh-dot-com,umac-128-at-openssh-dot-com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160-at-openssh-dot-com,hmac-sha1-96,hmac-md5-96
> [preauth]
> debug2: kex_parse_kexinit:
> hmac-md5-etm-at-openssh-dot-com,hmac-sha1-etm-at-openssh-dot-com,umac-64-etm-at-openssh-dot-com,umac-128-etm-at-openssh-dot-com,hmac-sha2-256-etm-at-openssh-dot-com,hmac-sha2-512-etm-at-openssh-dot-com,hmac-ripemd160-etm-at-openssh-dot-com,hmac-sha1-96-etm-at-openssh-dot-com,hmac-md5-96-etm-at-openssh-dot-com,hmac-md5,hmac-sha1,umac-64-at-openssh-dot-com,umac-128-at-openssh-dot-com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160-at-openssh-dot-com,hmac-sha1-96,hmac-md5-96
> [preauth]
> debug2: kex_parse_kexinit: none,zlib-at-openssh-dot-com [preauth]
> debug2: kex_parse_kexinit: none,zlib-at-openssh-dot-com [preauth]
> debug2: kex_parse_kexinit: [preauth]
> debug2: kex_parse_kexinit: [preauth]
> debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
> debug2: kex_parse_kexinit: reserved 0 [preauth]
> debug2: kex_parse_kexinit:
> ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
> [preauth]
> debug2: kex_parse_kexinit:
> ecdsa-sha2-nistp256-cert-v01-at-openssh-dot-com,ecdsa-sha2-nistp384-cert-v01-at-openssh-dot-com,ecdsa-sha2-nistp521-cert-v01-at-openssh-dot-com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-rsa-cert-v01-at-openssh-dot-com,ssh-dss-cert-v01-at-openssh-dot-com,ssh-rsa-cert-v00-at-openssh-dot-com,ssh-dss-cert-v00-at-openssh-dot-com,ssh-rsa,ssh-dss
> [preauth]
> debug2: kex_parse_kexinit:
> aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm-at-openssh-dot-com,aes256-gcm-at-openssh-dot-com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc-at-lysator.liu.se
> [preauth]
> debug2: kex_parse_kexinit:
> aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm-at-openssh-dot-com,aes256-gcm-at-openssh-dot-com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc-at-lysator.liu.se
> [preauth]
> debug2: kex_parse_kexinit:
> hmac-md5-etm-at-openssh-dot-com,hmac-sha1-etm-at-openssh-dot-com,umac-64-etm-at-openssh-dot-com,umac-128-etm-at-openssh-dot-com,hmac-sha2-256-etm-at-openssh-dot-com,hmac-sha2-512-etm-at-openssh-dot-com,hmac-ripemd160-etm-at-openssh-dot-com,hmac-sha1-96-etm-at-openssh-dot-com,hmac-md5-96-etm-at-openssh-dot-com,hmac-md5,hmac-sha1,umac-64-at-openssh-dot-com,umac-128-at-openssh-dot-com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160-at-openssh-dot-com,hmac-sha1-96,hmac-md5-96
> [preauth]
> debug2: kex_parse_kexinit:
> hmac-md5-etm-at-openssh-dot-com,hmac-sha1-etm-at-openssh-dot-com,umac-64-etm-at-openssh-dot-com,umac-128-etm-at-openssh-dot-com,hmac-sha2-256-etm-at-openssh-dot-com,hmac-sha2-512-etm-at-openssh-dot-com,hmac-ripemd160-etm-at-openssh-dot-com,hmac-sha1-96-etm-at-openssh-dot-com,hmac-md5-96-etm-at-openssh-dot-com,hmac-md5,hmac-sha1,umac-64-at-openssh-dot-com,umac-128-at-openssh-dot-com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160-at-openssh-dot-com,hmac-sha1-96,hmac-md5-96
> [preauth]
> debug2: kex_parse_kexinit: none,zlib-at-openssh-dot-com,zlib [preauth]
> debug2: kex_parse_kexinit: none,zlib-at-openssh-dot-com,zlib [preauth]
> debug2: kex_parse_kexinit: [preauth]
> debug2: kex_parse_kexinit: [preauth]
> debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
> debug2: kex_parse_kexinit: reserved 0 [preauth]
> debug2: mac_setup: found hmac-md5-etm-at-openssh-dot-com [preauth]
> debug1: kex: client->server aes128-ctr hmac-md5-etm-at-openssh-dot-com
> none [preauth]
> debug2: mac_setup: found hmac-md5-etm-at-openssh-dot-com [preauth]
> debug1: kex: server->client aes128-ctr hmac-md5-etm-at-openssh-dot-com
> none [preauth]
> debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
> debug3: mm_key_sign entering [preauth]
> debug3: mm_request_send entering: type 6 [preauth]
> debug3: mm_key_sign: waiting for MONITOR_ANS_SIGN [preauth]
> debug3: mm_request_receive_expect entering: type 7 [preauth]
> debug3: mm_request_receive entering [preauth]
> debug3: mm_request_receive entering
> debug3: monitor_read: checking request 6
> debug3: mm_answer_sign
> debug3: mm_answer_sign: signature 0x20060438(101)
> debug3: mm_request_send entering: type 7
> debug2: monitor_read: 6 used once, disabling now
> debug2: kex_derive_keys [preauth]
> debug2: set_newkeys: mode 1 [preauth]
> debug1: SSH2_MSG_NEWKEYS sent [preauth]
> debug1: expecting SSH2_MSG_NEWKEYS [preauth]
> debug2: set_newkeys: mode 0 [preauth]
> debug1: SSH2_MSG_NEWKEYS received [preauth]
> debug1: KEX done [preauth]
> debug1: userauth-request for user sftp_user service ssh-connection
> method none [preauth]
> debug1: attempt 0 failures 0 [preauth]
> debug3: mm_getpwnamallow entering [preauth]
> debug3: mm_request_send entering: type 8 [preauth]
> debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM [preauth]
> debug3: mm_request_receive_expect entering: type 9 [preauth]
> debug3: mm_request_receive entering [preauth]
> debug3: mm_request_receive entering
> debug3: monitor_read: checking request 8
> debug3: mm_answer_pwnamallow
> debug3: Trying to reverse map address 127.0.0.1.
> Address 127.0.0.1 maps to SERVER-SSHD-BROKE, but this does not map
> back to the address - POSSIBLE BREAK-IN ATTEMPT!
> debug2: parse_server_config: config reprocess config len 350
> debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
> debug3: mm_request_send entering: type 9
> debug2: monitor_read: 8 used once, disabling now
> debug2: input_userauth_request: setting up authctxt for sftp_user [preauth]
> debug3: mm_inform_authserv entering [preauth]
> debug3: mm_request_send entering: type 4 [preauth]
> debug2: input_userauth_request: try method none [preauth]
> debug3: userauth_finish: failure partial=0 next
> methods="publickey,keyboard-interactive" [preauth]
> debug1: userauth-request for user sftp_user service ssh-connection
> method publickey [preauth]
> debug1: attempt 1 failures 0 [preauth]
> debug2: input_userauth_request: try method publickey [preauth]
> debug1: test whether pkalg/pkblob are acceptable [preauth]
> debug3: mm_key_allowed entering [preauth]
> debug3: mm_request_send entering: type 22 [preauth]
> debug3: mm_key_allowed: waiting for MONITOR_ANS_KEYALLOWED [preauth]
> debug3: mm_request_receive_expect entering: type 23 [preauth]
> debug3: mm_request_receive entering [preauth]
> debug3: mm_request_receive entering
> debug3: monitor_read: checking request 4
> debug3: mm_answer_authserv: service=ssh-connection, style=
> debug2: monitor_read: 4 used once, disabling now
> debug3: mm_request_receive entering
> debug3: monitor_read: checking request 22
> debug3: mm_answer_keyallowed entering
> debug3: mm_answer_keyallowed: key_from_blob: 0x2005ebb8
> debug1: temporarily_use_uid: 1019/513 (e=1006/513)
> seteuid 1019: Operation not permitted
> debug1: do_cleanup
> debug1: Killing privsep child 1552
>
>
>
> ---------- Forwarded message ----------
> From: Evan Rowley
> Date: Mon, Sep 16, 2013 at 4:50 PM
> Subject: Re: Fwd: Way to test cyglsa?
> To: Andrey Repin
>
>
> Every day I learn something new. This cygcheck utility produces a lot
> of useful information. I've done a diff on the cygcheck for the server
> where sshd is working and the server where sshd is not working.
>
> Summary of the diff is as follows:
>
> - A gid 0 root group exists on the server where sshd works. The
> gid 0 root group does not exist on the server where sshd does not
> work. I went ahead and created this root group on the server where
> - The sshd service on the server where sshd doesn't work is
> configured in debug mode. The sshd service on the server where sshd
> does work is not configured in debug mode, for obvious reasons.
> - The cygserver service is configured to run on the server where
> sshd isn't working. The cygserver service isn't configured to run on
> the server where ssh was working. I remember thinking that cygserver
> was necessary for cyglsa to work properly. Also, the server where sshd
> is working had sshd working even without cyglsa configured.
>
> -------- SSHD IS NOT WORKING --------
>
>
> Cygwin Configuration Diagnostics
> Current System Time: Mon Sep 16 21:21:11 2013
>
> Windows 2003 Server Ver 5.2 Build 3790 Service Pack 2
>
> Running in Terminal Service session
>
> Path: C:\cygwin\usr\local\bin
> C:\cygwin\bin
> D:\oracle\11.2.0\dbhome\bin
> D:\oracle\11.2.0\dbhome\OPatch
> C:\Perl\bin
> C:\WINDOWS\system32
> C:\WINDOWS
> C:\WINDOWS\System32\Wbem
> C:\WINDOWS\system32\WindowsPowerShell\v1.0
> C:\Program Files\Windows Imaging
>
> Output from C:\cygwin\bin\id.exe
> UID: 500(Administrator) GID: 513(None)
> 513(None) 544(Administrators) 545(Users)
> 1003(ora_dba)
>
> SysDir: C:\WINDOWS\system32
> WinDir: C:\WINDOWS
>
> USER = 'Administrator'
> PWD = '/home/Administrator'
> HOME = '/home/Administrator'
>
> HOMEPATH = '\Documents and Settings\Administrator'
> MANPATH = '/usr/local/man:/usr/share/man:/usr/man:'
> APPDATA = 'C:\Documents and Settings\Administrator\Application Data'
> HOSTNAME = 'SERVER-SSHD-BROKE'
> SHELL = '/bin/bash'
> TERM = 'xterm'
> PROCESSOR_IDENTIFIER = 'x86 Family 6 Model 44 Stepping 2, GenuineIntel'
> WINDIR = 'C:\WINDOWS'
> PERL5LIB = 'D:\oracle\ora10g\sysman\admin\scripts;'
> OLDPWD = '/cygdrive/c/Documents and Settings/Administrator/Desktop'
> USERDOMAIN = 'SERVER-SSHD-BROKE'
> UATDATA = 'C:\WINDOWS\system32\CCM\UATData\D9F8C395-CAB8-491d-B8AC-179A1FE1BE77'
> OS = 'Windows_NT'
> ALLUSERSPROFILE = 'C:\Documents and Settings\All Users'
> temp = 'C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\3'
> COMMONPROGRAMFILES = 'C:\Program Files\Common Files'
> TMP = '/tmp'
> USERNAME = 'Administrator'
> ClusterLog = 'C:\WINDOWS\Cluster\cluster.log'
> PROCESSOR_LEVEL = '6'
> FP_NO_HOST_CHECK = 'NO'
> SYSTEMDRIVE = 'C:'
> LANG = 'en_US.UTF-8'
> USERPROFILE = 'C:\Documents and Settings\Administrator'
> CLIENTNAME = 'MY-LAPTOP'
> TZ = 'America/New_York'
> PS1 = '\[\e]0;\w\a\]\n\[\e[32m\]\u@\h \[\e[33m\]\w\[\e[0m\]\n\$ '
> LOGONSERVER = '\\SERVER-SSHD-BROKE'
> PROCESSOR_ARCHITECTURE = 'x86'
> SHLVL = '1'
> PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1'
> HOMEDRIVE = 'C:'
> COMSPEC = 'C:\WINDOWS\system32\cmd.exe'
> SYSTEMROOT = 'C:\WINDOWS'
> PRINTER = 'Microsoft XPS Document Writer'
> PROCESSOR_REVISION = '2c02'
> INFOPATH = '/usr/local/info:/usr/share/info:/usr/info:'
> PROGRAMFILES = 'C:\Program Files'
> NUMBER_OF_PROCESSORS = '1'
> ORACLE_HOME = 'D:\oracle\11.2.0\dbhome'
> SESSIONNAME = 'RDP-Tcp#5'
> COMPUTERNAME = 'SERVER-SSHD-BROKE'
> _ = '/usr/bin/cygcheck'
>
> HKEY_CURRENT_USER\Software\Cygwin
> HKEY_CURRENT_USER\Software\Cygwin\Program Options
> HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start
> Menu2\Programs\Cygwin
> (default) = (unsupported type)
> HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet
> Settings\ZoneMap\EscDomains\cygwin.com
> (default) = 0x00000002
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Installations
> (default) = '\??\C:\cygwin'
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Program Options
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\setup
> (default) = 'C:\cygwin'
>
> obcaseinsensitive set to 1
>
> Cygwin installations found in the registry:
> System: Key: c5e39b7a9d22bafb Path: C:\cygwin
>
> a: fd N/A N/A
> c: hd NTFS 76791Mb 21% CP CS UN PA FC
> d: hd NTFS 153597Mb 56% CP CS UN PA FC New Volume
> g: hd NTFS 102398Mb 62% CP CS UN PA FC New Volume
> r: hd NTFS 262138Mb 25% CP CS UN PA FC Recovery
> z: cd N/A N/A
>
> C:\cygwin / system binary,auto
> C:\cygwin\bin /usr/bin system binary,auto
> C:\cygwin\lib /usr/lib system binary,auto
> cygdrive prefix /cygdrive user binary,posix=0,auto
>
> Found: C:\cygwin\bin\awk
> -> C:\cygwin\bin\gawk.exe
> Found: C:\cygwin\bin\bash.exe
> Found: C:\cygwin\bin\cat.exe
> Found: C:\cygwin\bin\cp.exe
> Not Found: cpp (good!)
> Not Found: crontab
> Found: C:\cygwin\bin\find.exe
> Found: C:\WINDOWS\system32\find.exe
> Warning: C:\cygwin\bin\find.exe hides C:\WINDOWS\system32\find.exe
> Not Found: gcc
> Not Found: gdb
> Found: C:\cygwin\bin\grep.exe
> Found: C:\cygwin\bin\kill.exe
> Not Found: ld
> Found: C:\cygwin\bin\ls.exe
> Not Found: make
> Found: C:\cygwin\bin\mv.exe
> Not Found: patch
> Found: C:\Perl\bin\perl.exe
> Found: C:\Perl\bin\perl
> Warning: C:\Perl\bin\perl.exe hides C:\Perl\bin\perl
> Found: C:\cygwin\bin\rm.exe
> Found: C:\cygwin\bin\sed.exe
> Found: C:\cygwin\bin\ssh.exe
> Found: C:\cygwin\bin\sh.exe
> Found: C:\cygwin\bin\tar.exe
> Found: C:\cygwin\bin\test.exe
> Found: C:\cygwin\bin\vi.exe
> Not Found: vim
>
> 449k 2013/01/01 C:\cygwin\bin\cygasn1-8.dll - os=4.0 img=1.0 sys=4.0
> "cygasn1-8.dll" v0.0 ts=2013-01-01 06:34
> 14k 2012/05/04 C:\cygwin\bin\cygattr-1.dll - os=4.0 img=1.0 sys=4.0
> "cygattr-1.dll" v0.0 ts=2012-05-04 12:35
> 62k 2011/05/21 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0
> "cygbz2-1.dll" v0.0 ts=2011-05-21 20:16
> 10k 2013/03/11 C:\cygwin\bin\cygcom_err-2.dll - os=4.0 img=1.0 sys=4.0
> "cygcom_err-2.dll" v0.0 ts=2013-03-11 03:04
> 7k 2012/05/07 C:\cygwin\bin\cygcrypt-0.dll - os=4.0 img=1.0 sys=4.0
> "cygcrypt-0.dll" v0.0 ts=2012-05-07 12:18
> 1518k 2013/02/12 C:\cygwin\bin\cygcrypto-1.0.0.dll - os=4.0 img=1.0 sys=4.0
> "cygcrypto-1.0.0.dll" v0.0 ts=2013-02-12 14:44
> 140k 2012/05/03 C:\cygwin\bin\cygedit-0.dll - os=4.0 img=1.0 sys=4.0
> "cygedit-0.dll" v0.0 ts=2012-05-03 18:12
> 43k 2010/01/02 C:\cygwin\bin\cygform-10.dll - os=4.0 img=1.0 sys=4.0
> "cygform-10.dll" v0.0 ts=2010-01-02 14:49
> 47k 2010/01/02 C:\cygwin\bin\cygformw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygformw-10.dll" v0.0 ts=2010-01-02 17:31
> 103k 2013/06/16 C:\cygwin\bin\cyggcc_s-1.dll - os=4.0 img=1.0 sys=4.0
> "cyggcc_s-1.dll" v0.0 ts=2013-06-16 04:33
> 452k 2013/08/04 C:\cygwin\bin\cyggmp-10.dll - os=4.0 img=1.0 sys=4.0
> "cyggmp-10.dll" v0.0 ts=2013-08-04 22:28
> 317k 2011/07/31 C:\cygwin\bin\cyggmp-3.dll - os=4.0 img=1.0 sys=4.0
> "cyggmp-3.dll" v0.0 ts=2011-07-31 06:14
> 180k 2013/01/01 C:\cygwin\bin\cyggssapi-3.dll - os=4.0 img=1.0 sys=4.0
> "cyggssapi-3.dll" v0.0 ts=2013-01-01 06:58
> 11k 2013/01/01 C:\cygwin\bin\cygheimbase-1.dll - os=4.0 img=1.0 sys=4.0
> "cygheimbase-1.dll" v0.0 ts=2013-01-01 06:31
> 20k 2013/01/01 C:\cygwin\bin\cygheimntlm-0.dll - os=4.0 img=1.0 sys=4.0
> "cygheimntlm-0.dll" v0.0 ts=2013-01-01 06:49
> 25k 2012/05/04 C:\cygwin\bin\cyghistory7.dll - os=4.0 img=1.0 sys=4.0
> "cyghistory7.dll" v0.0 ts=2012-05-04 22:07
> 211k 2013/01/01 C:\cygwin\bin\cyghx509-5.dll - os=4.0 img=1.0 sys=4.0
> "cyghx509-5.dll" v0.0 ts=2013-01-01 06:37
> 985k 2011/10/16 C:\cygwin\bin\cygiconv-2.dll - os=4.0 img=1.0 sys=4.0
> "cygiconv-2.dll" v0.0 ts=2011-10-16 18:01
> 35k 2011/10/16 C:\cygwin\bin\cygintl-8.dll - os=4.0 img=1.0 sys=4.0
> "cygintl-8.dll" v0.0 ts=2011-10-16 06:38
> 21k 2013/01/01 C:\cygwin\bin\cygkafs-0.dll - os=4.0 img=1.0 sys=4.0
> "cygkafs-0.dll" v0.0 ts=2013-01-01 06:50
> 373k 2013/01/01 C:\cygwin\bin\cygkrb5-26.dll - os=4.0 img=1.0 sys=4.0
> "cygkrb5-26.dll" v0.0 ts=2013-01-01 06:43
> 5k 2013/08/31 C:\cygwin\bin\cyglsa.dll - os=4.0 img=1.0 sys=4.0
> "cyglsa.dll" v0.0 ts=2013-08-31 19:39
> 6k 2013/08/31 C:\cygwin\bin\cyglsa64.dll (not x86 dll)
> 123k 2011/05/19 C:\cygwin\bin\cyglzma-5.dll - os=4.0 img=1.0 sys=4.0
> "cyglzma-5.dll" v0.0 ts=2011-05-19 03:41
> 94k 2012/04/22 C:\cygwin\bin\cygmagic-1.dll - os=4.0 img=1.0 sys=4.0
> "cygmagic-1.dll" v0.0 ts=2012-04-22 19:09
> 25k 2010/01/02 C:\cygwin\bin\cygmenu-10.dll - os=4.0 img=1.0 sys=4.0
> "cygmenu-10.dll" v0.0 ts=2010-01-02 14:48
> 25k 2010/01/02 C:\cygwin\bin\cygmenuw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygmenuw-10.dll" v0.0 ts=2010-01-02 17:30
> 213k 2011/07/31 C:\cygwin\bin\cygmp-3.dll - os=4.0 img=1.0 sys=4.0
> "cygmp-3.dll" v0.0 ts=2011-07-31 06:12
> 344k 2013/04/11 C:\cygwin\bin\cygmpfr-4.dll - os=4.0 img=1.0 sys=4.0
> "cygmpfr-4.dll" v0.0 ts=2013-04-11 19:07
> 63k 2010/01/02 C:\cygwin\bin\cygncurses++-10.dll - os=4.0 img=1.0 sys=4.0
> "cygncurses++-10.dll" v0.0 ts=2010-01-02 15:00
> 63k 2010/01/02 C:\cygwin\bin\cygncurses++w-10.dll - os=4.0 img=1.0 sys=4.0
> "cygncurses++w-10.dll" v0.0 ts=2010-01-02 17:41
> 195k 2010/01/02 C:\cygwin\bin\cygncurses-10.dll - os=4.0 img=1.0 sys=4.0
> "cygncurses-10.dll" v0.0 ts=2010-01-02 14:45
> 244k 2010/01/02 C:\cygwin\bin\cygncursesw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygncursesw-10.dll" v0.0 ts=2010-01-02 17:28
> 13k 2010/01/02 C:\cygwin\bin\cygpanel-10.dll - os=4.0 img=1.0 sys=4.0
> "cygpanel-10.dll" v0.0 ts=2010-01-02 14:47
> 13k 2010/01/02 C:\cygwin\bin\cygpanelw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygpanelw-10.dll" v0.0 ts=2010-01-02 16:30
> 255k 2012/02/10 C:\cygwin\bin\cygpcre-0.dll - os=4.0 img=1.0 sys=4.0
> "cygpcre-0.dll" v0.0 ts=2012-02-10 10:24
> 22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0
> "cygpopt-0.dll" v0.0 ts=2002-06-09 06:45
> 162k 2012/05/04 C:\cygwin\bin\cygreadline7.dll - os=4.0 img=1.0 sys=4.0
> "cygreadline7.dll" v0.0 ts=2012-05-04 22:07
> 51k 2013/01/01 C:\cygwin\bin\cygroken-18.dll - os=4.0 img=1.0 sys=4.0
> "cygroken-18.dll" v0.0 ts=2013-01-01 06:32
> 588k 2013/06/10 C:\cygwin\bin\cygsqlite3-0.dll - os=4.0 img=1.0 sys=4.0
> "cygsqlite3-0.dll" v0.0 ts=2013-06-10 20:46
> 366k 2013/02/12 C:\cygwin\bin\cygssl-1.0.0.dll - os=4.0 img=1.0 sys=4.0
> "cygssl-1.0.0.dll" v0.0 ts=2013-02-12 14:44
> 10k 2013/06/16 C:\cygwin\bin\cygssp-0.dll - os=4.0 img=1.0 sys=4.0
> "cygssp-0.dll" v0.0 ts=2013-06-16 04:42
> 878k 2013/06/16 C:\cygwin\bin\cygstdc++-6.dll - os=4.0 img=1.0 sys=4.0
> "cygstdc++-6.dll" v0.0 ts=2013-06-15 14:07
> 48k 2010/01/02 C:\cygwin\bin\cygtic-10.dll - os=4.0 img=1.0 sys=4.0
> "cygtic-10.dll" v0.0 ts=2010-01-02 14:45
> 48k 2010/01/02 C:\cygwin\bin\cygticw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygticw-10.dll" v0.0 ts=2010-01-02 17:28
> 157k 2013/01/01 C:\cygwin\bin\cygwind-0.dll - os=4.0 img=1.0 sys=4.0
> "cygwind-0.dll" v0.0 ts=2013-01-01 06:33
> 28k 2010/03/28 C:\cygwin\bin\cygwrap-0.dll - os=4.0 img=1.0 sys=4.0
> "cygwrap-0.dll" v0.0 ts=2010-03-28 10:02
> 73k 2013/05/09 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0
> "cygz.dll" v0.0 ts=2013-05-09 22:21
> 3042k 2013/08/31 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
> "cygwin1.dll" v0.0 ts=2013-08-31 19:40
> Cygwin DLL version info:
> DLL version: 1.7.25
> DLL epoch: 19
> DLL old termios: 5
> DLL malloc env: 28
> Cygwin conv: 181
> API major: 0
> API minor: 270
> Shared data: 5
> DLL identifier: cygwin1
> Mount registry: 3
> Cygwin registry name: Cygwin
> Program options name: Program Options
> Installations name: Installations
> Cygdrive default prefix:
> Build date:
> Shared id: cygwin1S5
>
>
> Service : cygserver
> Display name : CYGWIN cygserver
> Current State : Running
> Controls Accepted : Stop
> Command : /usr/sbin/cygserver
> stdin path : /dev/null
> stdout path : /var/log/cygserver.log
> stderr path : /var/log/cygserver.log
> Process Type : Own Process
> Startup : Automatic
> Account : LocalSystem
>
> Service : sshd
> Display name : CYGWIN sshd
> Current State : Stopped
> Command : /usr/sbin/sshd -D -d
> stdin path : /dev/null
> stdout path : /var/log/sshd.log
> stderr path : /var/log/sshd.log
> Process Type : Own Process
> Startup : Automatic
> Dependencies : tcpip
> Account : .\cyg_server
>
>
> Cygwin Package Information
> Last downloaded files to: C:\cygwinsetup
> Last downloaded files from: http://cygwin.cybermirror.org/
>
> Package Version Status
> alternatives 1.3.30c-10 OK
> base-cygwin 3.3-1 OK
> base-files 4.1-1 OK
> bash 4.1.10-4 OK
> bzip2 1.0.6-2 OK
> coreutils 8.15-1 OK
> crypt 1.2-1 OK
> csih 0.9.7-1 OK
> cygrunsrv 1.40-2 OK
> cygutils 1.4.14-1 OK
> cygwin 1.7.25-1 OK
> dash 0.5.7-1 OK
> diffutils 3.2-1 OK
> dos2unix 6.0.3-1 OK
> editrights 1.01-2 OK
> file 5.11-1 OK
> findutils 4.5.11-1 OK
> gawk 4.1.0-1 OK
> gettext 0.18.1.1-2 OK
> grep 2.6.3-1 OK
> groff 1.21-2 OK
> gzip 1.4-1 OK
> ipc-utils 1.0-1 OK
> less 444-1 OK
> libasn1_8 1.5.2-4 OK
> libattr1 2.4.46-1 OK
> libbz2_1 1.0.6-2 OK
> libcom_err2 1.42.7-1 OK
> libedit0 20120311-1 OK
> libgcc1 4.7.3-1 OK
> libgmp10 5.1.2-1 OK
> libgmp3 4.3.2-1 OK
> libgssapi3 1.5.2-4 OK
> libheimbase1 1.5.2-4 OK
> libheimntlm0 1.5.2-4 OK
> libhx509_5 1.5.2-4 OK
> libiconv2 1.14-2 OK
> libintl8 0.18.1.1-2 OK
> libkafs0 1.5.2-4 OK
> libkrb5_26 1.5.2-4 OK
> liblzma5 5.0.2_20110517-1 OK
> libmpfr4 3.1.2-1 OK
> libncurses10 5.7-18 OK
> libncursesw10 5.7-18 OK
> libopenssl100 1.0.1e-2 OK
> libpcre0 8.21-2 OK
> libpopt0 1.6.4-4 OK
> libreadline7 6.1.2-3 OK
> libroken18 1.5.2-4 OK
> libsqlite3_0 3.7.17-3 OK
> libssp0 4.7.3-1 OK
> libstdc++6 4.7.3-1 OK
> libwind0 1.5.2-4 OK
> libwrap0 7.6-21 OK
> login 1.10-10 OK
> man 1.6g-2 OK
> mintty 1.1.3-1 OK
> openssh 6.2p2-1 OK
> rebase 4.4.0-1 OK
> run 1.3.0-1 OK
> sed 4.2.2-3 OK
> tar 1.26-1 OK
> terminfo 5.7_20091114-14 OK
> tzcode 2013c-1 OK
> vim-minimal 7.3.1152-1 OK
> which 2.20-2 OK
> xz 5.0.2_20110517-1 OK
> zlib0 1.2.8-1 OK
> Use -h to see help about each section
>
>
> -------- SSHD IS WORKING :) --------
>
>
> Cygwin Configuration Diagnostics
> Current System Time: Mon Sep 16 21:26:12 2013
>
> Windows 2003 Server Ver 5.2 Build 3790 Service Pack 2
>
> Running in Terminal Service session
>
> Path: C:\cygwin\usr\local\bin
> C:\cygwin\bin
> D:\oracle\11.2.0\dbhome\bin
> D:\oracle\11.2.0\dbhome\Opatch
> C:\WINDOWS\system32
> C:\WINDOWS
> C:\WINDOWS\System32\Wbem
> C:\WINDOWS\system32\WindowsPowerShell\v1.0
> C:\Program Files\Windows Imaging
>
> Output from C:\cygwin\bin\id.exe
> UID: 500(Administrator) GID: 513(None)
> 513(None) 0(root) 544(Administrators)
> 545(Users)
>
> SysDir: C:\WINDOWS\system32
> WinDir: C:\WINDOWS
>
> USER = 'Administrator'
> PWD = '/home/Administrator'
> HOME = '/home/Administrator'
>
> HOMEPATH = '\Documents and Settings\Administrator'
> MANPATH = '/usr/local/man:/usr/share/man:/usr/man:'
> APPDATA = 'C:\Documents and Settings\Administrator\Application Data'
> HOSTNAME = 'SERVER-SSHD-WORKS'
> SHELL = '/bin/bash'
> TERM = 'xterm'
> PROCESSOR_IDENTIFIER = 'x86 Family 6 Model 44 Stepping 2, GenuineIntel'
> WINDIR = 'C:\WINDOWS'
> OLDPWD = '/cygdrive/c/Documents and Settings/Administrator/Desktop'
> USERDOMAIN = 'SERVER-SSHD-WORKS'
> UATDATA = 'C:\WINDOWS\system32\CCM\UATData\D9F8C395-CAB8-491d-B8AC-179A1FE1BE77'
> OS = 'Windows_NT'
> ALLUSERSPROFILE = 'C:\Documents and Settings\All Users'
> temp = 'C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\2'
> COMMONPROGRAMFILES = 'C:\Program Files\Common Files'
> TMP = '/tmp'
> USERNAME = 'Administrator'
> ClusterLog = 'C:\WINDOWS\Cluster\cluster.log'
> PROCESSOR_LEVEL = '6'
> FP_NO_HOST_CHECK = 'NO'
> SYSTEMDRIVE = 'C:'
> LANG = 'en_US.UTF-8'
> USERPROFILE = 'C:\Documents and Settings\Administrator'
> CLIENTNAME = 'MY-LAPTOP'
> TZ = 'America/New_York'
> PS1 = '\[\e]0;\w\a\]\n\[\e[32m\]\u@\h \[\e[33m\]\w\[\e[0m\]\n\$ '
> LOGONSERVER = '\\SERVER-SSHD-WORKS'
> PROCESSOR_ARCHITECTURE = 'x86'
> SHLVL = '1'
> PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1'
> HOMEDRIVE = 'C:'
> COMSPEC = 'C:\WINDOWS\system32\cmd.exe'
> SYSTEMROOT = 'C:\WINDOWS'
> PRINTER = 'Microsoft XPS Document Writer'
> PROCESSOR_REVISION = '2c02'
> INFOPATH = '/usr/local/info:/usr/share/info:/usr/info:'
> PROGRAMFILES = 'C:\Program Files'
> NUMBER_OF_PROCESSORS = '4'
> ORACLE_HOME = 'D:\oracle\11.2.0\dbhome'
> SESSIONNAME = 'RDP-Tcp#5'
> COMPUTERNAME = 'SERVER-SSHD-WORKS'
> _ = '/usr/bin/cygcheck'
>
> HKEY_CURRENT_USER\Software\Cygwin
> HKEY_CURRENT_USER\Software\Cygwin\Program Options
> HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start
> Menu\Programs\Cygwin
> (default) = (unsupported type)
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Installations
> (default) = '\??\C:\cygwin'
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Program Options
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\setup
> (default) = 'C:\cygwin'
>
> obcaseinsensitive set to 1
>
> Cygwin installations found in the registry:
> System: Key: c5e39b7a9d22bafb Path: C:\cygwin
>
> a: fd N/A N/A
> c: hd NTFS 35828Mb 59% CP CS UN PA FC
> d: hd NTFS 153597Mb 26% CP CS UN PA FC Data
> f: cd N/A N/A
> g: hd NTFS 102398Mb 51% CP CS UN PA FC
> r: hd NTFS 204797Mb 18% CP CS UN PA FC Recovery
>
> C:\cygwin / system binary,auto
> C:\cygwin\bin /usr/bin system binary,auto
> C:\cygwin\lib /usr/lib system binary,auto
> cygdrive prefix /cygdrive user binary,posix=0,auto
>
> Found: C:\cygwin\bin\awk
> -> C:\cygwin\bin\gawk.exe
> Found: C:\cygwin\bin\bash.exe
> Found: C:\cygwin\bin\cat.exe
> Found: C:\cygwin\bin\cp.exe
> Not Found: cpp (good!)
> Not Found: crontab
> Found: C:\cygwin\bin\find.exe
> Found: C:\WINDOWS\system32\find.exe
> Warning: C:\cygwin\bin\find.exe hides C:\WINDOWS\system32\find.exe
> Not Found: gcc
> Not Found: gdb
> Found: C:\cygwin\bin\grep.exe
> Found: C:\cygwin\bin\kill.exe
> Not Found: ld
> Found: C:\cygwin\bin\ls.exe
> Not Found: make
> Found: C:\cygwin\bin\mv.exe
> Not Found: patch
> Not Found: perl
> Found: C:\cygwin\bin\rm.exe
> Found: C:\cygwin\bin\sed.exe
> Found: C:\cygwin\bin\ssh.exe
> Found: C:\cygwin\bin\sh.exe
> Found: C:\cygwin\bin\tar.exe
> Found: C:\cygwin\bin\test.exe
> Found: C:\cygwin\bin\vi.exe
> Not Found: vim
>
> 449k 2013/01/01 C:\cygwin\bin\cygasn1-8.dll - os=4.0 img=1.0 sys=4.0
> "cygasn1-8.dll" v0.0 ts=2013-01-01 06:34
> 14k 2012/05/04 C:\cygwin\bin\cygattr-1.dll - os=4.0 img=1.0 sys=4.0
> "cygattr-1.dll" v0.0 ts=2012-05-04 12:35
> 62k 2011/05/21 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0
> "cygbz2-1.dll" v0.0 ts=2011-05-21 20:16
> 10k 2013/03/11 C:\cygwin\bin\cygcom_err-2.dll - os=4.0 img=1.0 sys=4.0
> "cygcom_err-2.dll" v0.0 ts=2013-03-11 03:04
> 7k 2012/05/07 C:\cygwin\bin\cygcrypt-0.dll - os=4.0 img=1.0 sys=4.0
> "cygcrypt-0.dll" v0.0 ts=2012-05-07 12:18
> 1518k 2013/02/12 C:\cygwin\bin\cygcrypto-1.0.0.dll - os=4.0 img=1.0 sys=4.0
> "cygcrypto-1.0.0.dll" v0.0 ts=2013-02-12 14:44
> 140k 2012/05/03 C:\cygwin\bin\cygedit-0.dll - os=4.0 img=1.0 sys=4.0
> "cygedit-0.dll" v0.0 ts=2012-05-03 18:12
> 43k 2010/01/02 C:\cygwin\bin\cygform-10.dll - os=4.0 img=1.0 sys=4.0
> "cygform-10.dll" v0.0 ts=2010-01-02 14:49
> 47k 2010/01/02 C:\cygwin\bin\cygformw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygformw-10.dll" v0.0 ts=2010-01-02 17:31
> 103k 2013/06/16 C:\cygwin\bin\cyggcc_s-1.dll - os=4.0 img=1.0 sys=4.0
> "cyggcc_s-1.dll" v0.0 ts=2013-06-16 04:33
> 452k 2013/08/04 C:\cygwin\bin\cyggmp-10.dll - os=4.0 img=1.0 sys=4.0
> "cyggmp-10.dll" v0.0 ts=2013-08-04 22:28
> 317k 2011/07/31 C:\cygwin\bin\cyggmp-3.dll - os=4.0 img=1.0 sys=4.0
> "cyggmp-3.dll" v0.0 ts=2011-07-31 06:14
> 180k 2013/01/01 C:\cygwin\bin\cyggssapi-3.dll - os=4.0 img=1.0 sys=4.0
> "cyggssapi-3.dll" v0.0 ts=2013-01-01 06:58
> 11k 2013/01/01 C:\cygwin\bin\cygheimbase-1.dll - os=4.0 img=1.0 sys=4.0
> "cygheimbase-1.dll" v0.0 ts=2013-01-01 06:31
> 20k 2013/01/01 C:\cygwin\bin\cygheimntlm-0.dll - os=4.0 img=1.0 sys=4.0
> "cygheimntlm-0.dll" v0.0 ts=2013-01-01 06:49
> 25k 2012/05/04 C:\cygwin\bin\cyghistory7.dll - os=4.0 img=1.0 sys=4.0
> "cyghistory7.dll" v0.0 ts=2012-05-04 22:07
> 211k 2013/01/01 C:\cygwin\bin\cyghx509-5.dll - os=4.0 img=1.0 sys=4.0
> "cyghx509-5.dll" v0.0 ts=2013-01-01 06:37
> 985k 2011/10/16 C:\cygwin\bin\cygiconv-2.dll - os=4.0 img=1.0 sys=4.0
> "cygiconv-2.dll" v0.0 ts=2011-10-16 18:01
> 35k 2011/10/16 C:\cygwin\bin\cygintl-8.dll - os=4.0 img=1.0 sys=4.0
> "cygintl-8.dll" v0.0 ts=2011-10-16 06:38
> 21k 2013/01/01 C:\cygwin\bin\cygkafs-0.dll - os=4.0 img=1.0 sys=4.0
> "cygkafs-0.dll" v0.0 ts=2013-01-01 06:50
> 373k 2013/01/01 C:\cygwin\bin\cygkrb5-26.dll - os=4.0 img=1.0 sys=4.0
> "cygkrb5-26.dll" v0.0 ts=2013-01-01 06:43
> 5k 2013/08/31 C:\cygwin\bin\cyglsa.dll - os=4.0 img=1.0 sys=4.0
> "cyglsa.dll" v0.0 ts=2013-08-31 19:39
> 6k 2013/08/31 C:\cygwin\bin\cyglsa64.dll (not x86 dll)
> 123k 2011/05/19 C:\cygwin\bin\cyglzma-5.dll - os=4.0 img=1.0 sys=4.0
> "cyglzma-5.dll" v0.0 ts=2011-05-19 03:41
> 94k 2012/04/22 C:\cygwin\bin\cygmagic-1.dll - os=4.0 img=1.0 sys=4.0
> "cygmagic-1.dll" v0.0 ts=2012-04-22 19:09
> 25k 2010/01/02 C:\cygwin\bin\cygmenu-10.dll - os=4.0 img=1.0 sys=4.0
> "cygmenu-10.dll" v0.0 ts=2010-01-02 14:48
> 25k 2010/01/02 C:\cygwin\bin\cygmenuw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygmenuw-10.dll" v0.0 ts=2010-01-02 17:30
> 213k 2011/07/31 C:\cygwin\bin\cygmp-3.dll - os=4.0 img=1.0 sys=4.0
> "cygmp-3.dll" v0.0 ts=2011-07-31 06:12
> 344k 2013/04/11 C:\cygwin\bin\cygmpfr-4.dll - os=4.0 img=1.0 sys=4.0
> "cygmpfr-4.dll" v0.0 ts=2013-04-11 19:07
> 63k 2010/01/02 C:\cygwin\bin\cygncurses++-10.dll - os=4.0 img=1.0 sys=4.0
> "cygncurses++-10.dll" v0.0 ts=2010-01-02 15:00
> 63k 2010/01/02 C:\cygwin\bin\cygncurses++w-10.dll - os=4.0 img=1.0 sys=4.0
> "cygncurses++w-10.dll" v0.0 ts=2010-01-02 17:41
> 195k 2010/01/02 C:\cygwin\bin\cygncurses-10.dll - os=4.0 img=1.0 sys=4.0
> "cygncurses-10.dll" v0.0 ts=2010-01-02 14:45
> 244k 2010/01/02 C:\cygwin\bin\cygncursesw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygncursesw-10.dll" v0.0 ts=2010-01-02 17:28
> 13k 2010/01/02 C:\cygwin\bin\cygpanel-10.dll - os=4.0 img=1.0 sys=4.0
> "cygpanel-10.dll" v0.0 ts=2010-01-02 14:47
> 13k 2010/01/02 C:\cygwin\bin\cygpanelw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygpanelw-10.dll" v0.0 ts=2010-01-02 16:30
> 255k 2012/02/10 C:\cygwin\bin\cygpcre-0.dll - os=4.0 img=1.0 sys=4.0
> "cygpcre-0.dll" v0.0 ts=2012-02-10 10:24
> 22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0
> "cygpopt-0.dll" v0.0 ts=2002-06-09 06:45
> 162k 2012/05/04 C:\cygwin\bin\cygreadline7.dll - os=4.0 img=1.0 sys=4.0
> "cygreadline7.dll" v0.0 ts=2012-05-04 22:07
> 51k 2013/01/01 C:\cygwin\bin\cygroken-18.dll - os=4.0 img=1.0 sys=4.0
> "cygroken-18.dll" v0.0 ts=2013-01-01 06:32
> 588k 2013/06/10 C:\cygwin\bin\cygsqlite3-0.dll - os=4.0 img=1.0 sys=4.0
> "cygsqlite3-0.dll" v0.0 ts=2013-06-10 20:46
> 366k 2013/02/12 C:\cygwin\bin\cygssl-1.0.0.dll - os=4.0 img=1.0 sys=4.0
> "cygssl-1.0.0.dll" v0.0 ts=2013-02-12 14:44
> 10k 2013/06/16 C:\cygwin\bin\cygssp-0.dll - os=4.0 img=1.0 sys=4.0
> "cygssp-0.dll" v0.0 ts=2013-06-16 04:42
> 878k 2013/06/16 C:\cygwin\bin\cygstdc++-6.dll - os=4.0 img=1.0 sys=4.0
> "cygstdc++-6.dll" v0.0 ts=2013-06-15 14:07
> 48k 2010/01/02 C:\cygwin\bin\cygtic-10.dll - os=4.0 img=1.0 sys=4.0
> "cygtic-10.dll" v0.0 ts=2010-01-02 14:45
> 48k 2010/01/02 C:\cygwin\bin\cygticw-10.dll - os=4.0 img=1.0 sys=4.0
> "cygticw-10.dll" v0.0 ts=2010-01-02 17:28
> 157k 2013/01/01 C:\cygwin\bin\cygwind-0.dll - os=4.0 img=1.0 sys=4.0
> "cygwind-0.dll" v0.0 ts=2013-01-01 06:33
> 28k 2010/03/28 C:\cygwin\bin\cygwrap-0.dll - os=4.0 img=1.0 sys=4.0
> "cygwrap-0.dll" v0.0 ts=2010-03-28 10:02
> 73k 2013/05/09 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0
> "cygz.dll" v0.0 ts=2013-05-09 22:21
> 3042k 2013/08/31 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
> "cygwin1.dll" v0.0 ts=2013-08-31 19:40
> Cygwin DLL version info:
> DLL version: 1.7.25
> DLL epoch: 19
> DLL old termios: 5
> DLL malloc env: 28
> Cygwin conv: 181
> API major: 0
> API minor: 270
> Shared data: 5
> DLL identifier: cygwin1
> Mount registry: 3
> Cygwin registry name: Cygwin
> Program options name: Program Options
> Installations name: Installations
> Cygdrive default prefix:
> Build date:
> Shared id: cygwin1S5
>
>
> Service : sshd
> Display name : CYGWIN sshd
> Current State : Running
> Controls Accepted : Stop
> Command : /usr/sbin/sshd -D
> stdin path : /dev/null
> stdout path : /var/log/sshd.log
> stderr path : /var/log/sshd.log
> Environment : CYGWIN="ntsec"
> Process Type : Own Process
> Startup : Automatic
> Dependencies : tcpip
> Account : .\cyg_server
>
>
> Cygwin Package Information
> Last downloaded files to: C:\cygwinsetup
> Last downloaded files from: ftp://mirrors.kernel.org/sourceware/cygwin/
>
> Package Version Status
> _autorebase 000398-1 OK
> _update-info-dir 01184-1 OK
> alternatives 1.3.30c-10 OK
> base-cygwin 3.3-1 OK
> base-files 4.1-1 OK
> bash 4.1.10-4 OK
> bzip2 1.0.6-2 OK
> coreutils 8.15-1 OK
> crypt 1.2-1 OK
> csih 0.9.7-1 OK
> cygrunsrv 1.40-2 OK
> cygutils 1.4.14-1 OK
> cygwin 1.7.25-1 OK
> dash 0.5.7-1 OK
> diffutils 3.2-1 OK
> dos2unix 6.0.3-1 OK
> editrights 1.01-2 OK
> file 5.11-1 OK
> findutils 4.5.11-1 OK
> gawk 4.1.0-1 OK
> gettext 0.18.1.1-2 OK
> grep 2.6.3-1 OK
> groff 1.21-2 OK
> gzip 1.4-1 OK
> ipc-utils 1.0-1 OK
> less 444-1 OK
> libasn1_8 1.5.2-4 OK
> libattr1 2.4.46-1 OK
> libbz2_1 1.0.6-2 OK
> libcom_err2 1.42.7-1 OK
> libedit0 20120311-1 OK
> libgcc1 4.7.3-1 OK
> libgmp10 5.1.2-1 OK
> libgmp3 4.3.2-1 OK
> libgssapi3 1.5.2-4 OK
> libheimbase1 1.5.2-4 OK
> libheimntlm0 1.5.2-4 OK
> libhx509_5 1.5.2-4 OK
> libiconv2 1.14-2 OK
> libintl8 0.18.1.1-2 OK
> libkafs0 1.5.2-4 OK
> libkrb5_26 1.5.2-4 OK
> liblzma5 5.0.2_20110517-1 OK
> libmpfr4 3.1.2-1 OK
> libncurses10 5.7-18 OK
> libncursesw10 5.7-18 OK
> libopenssl100 1.0.1e-2 OK
> libpcre0 8.21-2 OK
> libpopt0 1.6.4-4 OK
> libreadline7 6.1.2-3 OK
> libroken18 1.5.2-4 OK
> libsqlite3_0 3.7.17-3 OK
> libssp0 4.7.3-1 OK
> libstdc++6 4.7.3-1 OK
> libwind0 1.5.2-4 OK
> libwrap0 7.6-21 OK
> login 1.10-10 OK
> man 1.6g-2 OK
> mintty 1.1.3-1 OK
> openssh 6.2p2-1 OK
> rebase 4.4.0-1 OK
> run 1.3.0-1 OK
> sed 4.2.2-3 OK
> tar 1.26-1 OK
> terminfo 5.7_20091114-14 OK
> texinfo 4.13-4 OK
> tzcode 2013c-1 OK
> vim-minimal 7.3.1152-1 OK
> which 2.20-2 OK
> xz 5.0.2_20110517-1 OK
> zlib0 1.2.8-1 OK
> Use -h to see help about each section
>
>
> --
> - EJR
--
- EJR
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: seteuid 1019: Operation not permitted
2014-02-16 2:12 ` Evan Rowley
@ 2014-02-16 6:05 ` Larry Hall (Cygwin)
0 siblings, 0 replies; 4+ messages in thread
From: Larry Hall (Cygwin) @ 2014-02-16 6:05 UTC (permalink / raw)
To: cygwin
On 2/15/2014 7:08 PM, Evan Rowley wrote:
> Everyone!
>
> I finally figured out what the problem was here.
>
> A group policy was in effect on the Windows machine. The group policy
> is supposed to enforce the baseline security configuration as defined
> by the Center for Internet Security (CIS) Benchmark for Windows
> Servers. One particular Local User Security Policy setting was
> disabled. It was "act as part of the operating system" - apparently
> this is needed in order for SSHD in Cygwin to work.
Yeah, this is mentioned in the closely related FAQ entry
<http://cygwin.com/faq.html#faq.using.sshd-in-domain>. The need for
it is also spelled out in the
/usr/share/csih/cygwin-service-installation-helper.sh script used by
/usr/bin/ssh-host-config. I know, it's not real
obvious that this is a requirement when you're installing or why. And
when it's not unavailable the complaints that ensue aren't that easy
to immediately track back to this security policy.
I have this vague recollection that this particular policy is only
necessary to support public key authentication, though I didn't test that.
Regardless, that's small consolation if public key authentication is what
you're looking for. ;-)
--
Larry
_____________________________________________________________________
A: Yes.
> Q: Are you sure?
>> A: Because it reverses the logical flow of conversation.
>>> Q: Why is top posting annoying in email?
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-02-16 6:04 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-09-17 19:36 seteuid 1019: Operation not permitted Evan Rowley
2013-09-20 13:35 ` Larry Hall (Cygwin)
2014-02-16 2:12 ` Evan Rowley
2014-02-16 6:05 ` Larry Hall (Cygwin)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).