From: Ken Brown <kbrown@cornell.edu>
To: "cygwin@cygwin.com" <cygwin@cygwin.com>
Subject: Re: Regression (last snapshot)
Date: Mon, 29 Jul 2019 14:26:00 -0000 [thread overview]
Message-ID: <ced2750a-0a52-1396-b6c1-f4228116bde7@cornell.edu> (raw)
In-Reply-To: <20190729134700.GO11632@calimero.vinschen.de>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 3247 bytes --]
On 7/29/2019 9:47 AM, Corinna Vinschen wrote:
> On Jul 29 13:18, Ken Brown wrote:
>> On 7/29/2019 4:45 AM, Corinna Vinschen wrote:
>>> On Jul 27 15:24, Ken Brown wrote:
>>>> On 7/27/2019 6:21 AM, Houder wrote:
>>>>> On Fri, 26 Jul 2019 22:12:43, Ken Brown wrote:
>>>>>
>>>>>> On 7/22/2019 2:47 PM, Houder wrote:
>>>>>
>>>>>>> The specific regression as reported, has gone.
>>>>>>>
>>>>>>> 64-@@ uname -a
>>>>>>> CYGWIN_NT-6.1 Seven 3.1.0s(0.339/5/3) 2019-07-22 16:43 x86_64 Cygwin
>>>>>>> 64-@@ ls -lL <(grep bash .bashrc)
>>>>>>> pr-------- 1 Henri None 0 Jul 22 20:36 /dev/fd/63
>>>>>>
>>>>> Over all the behavior has simularity w/ the error reported by David Karr:
>>>>>
>>>>> https://cygwin.com/ml/cygwin/2019-07/msg00150.html
>>>>> ( Piping input from subprocess loses track of temp file )
>>>> [...]
>>>> Repeating this under the 20190722 or 20190725 snapshots gave slightly worse
>>>> results (close to 500 errors). Using my own unoptimized build of cygwin1.dll,
>>>> the error count went up to about 650.
>>>
>>> I just tried this myself and I can't reproduce the problem. 1000 runs,
>>> no error.
>>
>> Interesting. And you ran this under X11 in an xterm window?
>
> I didn't, but I just did and the result is the same, no errors.
>
>>>> I tried running under gdb, but I couldn't get grep to fail. More precisely, I
>>>> didn't see an error message from grep. Every run looked like this:
>>>>
>>>> $ gdb bash
>>>> GNU gdb (GDB) (Cygwin 8.2.1-1) 8.2.1
>>>> [...]
>>>> (gdb) r -c 'ls -lL <(grep bash .bashrc)'
>>>> Starting program: /usr/bin/bash -c 'ls -lL <(grep bash .bashrc)'
>>>> [...]
>>>> pr-------- 1 kbrown None 0 2019-07-27 11:07 /dev/fd/63
>>>> [...]
>>>> [Inferior 1 (process 21712) exited normally]
>>>>
>>>> It would be better to be able to debug ls and/or grep, but I don't know how to
>>>> get to subprocesses in gdb. And I think I have to start with 'gdb bash' in
>>>> order for the process substitution to happen.
>>>
>>> Yeah, subprocess debugging is a problem in GDB. Given how this works,
>>> you can at least take grep out of the picture. Bash is doing all the
>>> lifting, so it's just bash and ls. Did you try to reproduce this under
>>> strace?
>>
>> Yes, but there I get an error (even under mintty) for a different reason:
>>
>> $ strace -o trace.out ls -lL <(grep bash .bashrc)
>> ls: cannot access '/dev/fd/63': No such file or directory
>
> No, please run bash:
>
> strace -o trace.out bash -c 'ls -lL <(grep bash .bashrc)'
>
> Otherwise there's no process actually creating the pipe, given the <()
> expression is a bash expression.
Yes, of course. I should have realized this since it's exactly what I did under
gdb. Anyway, the result is the same as it was under gdb: If I run the command
under strace, I don't see the broken pipe error.
Is it possible that debugging causes an fd to the read end of the pipe to stay
open longer, thereby preventing the error?
Ken
\0ТÒÐÐ¥\a&ö&ÆVÒ\a&W\x06÷'G3¢\x02\x02\x02\x02\x02\x02\x06GG\x03¢òö7wvâæ6öÒ÷\a&ö&ÆV×2æFÖÀФd\x15\x13¢\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x02\x06GG\x03¢òö7wvâæ6öÒöf\x17\x12ðФFö7VÖVçF\x17Föã¢\x02\x02\x02\x02\x02\x02\x02\x02\x06GG\x03¢òö7wvâæ6öÒöFö72æFÖÀÐ¥Vç7V'67&&R\x06æfó¢\x02\x02\x02\x02\x02\x06GG\x03¢òö7wvâæ6öÒöÖÂò7Vç7V'67&&R×6×\x06ÆPÐ Ð
next prev parent reply other threads:[~2019-07-29 14:26 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-20 22:55 Houder
2019-07-21 9:38 ` Houder
2019-07-21 9:42 ` Houder
2019-07-22 12:23 ` Ken Brown
2019-07-22 13:44 ` Ken Brown
2019-07-22 15:20 ` Corinna Vinschen
2019-07-22 15:53 ` Corinna Vinschen
2019-07-22 16:45 ` Corinna Vinschen
2019-07-22 18:47 ` Houder
2019-07-26 22:12 ` Ken Brown
2019-07-27 0:14 ` Ken Brown
2019-07-27 10:21 ` Houder
2019-07-27 15:24 ` Ken Brown
2019-07-27 16:25 ` Houder
2019-07-29 8:45 ` Corinna Vinschen
2019-07-29 13:18 ` Ken Brown
2019-07-29 13:35 ` Ken Brown
2019-07-29 13:48 ` Corinna Vinschen
2019-07-29 13:47 ` Corinna Vinschen
2019-07-29 14:26 ` Ken Brown [this message]
2019-07-29 15:23 ` Corinna Vinschen
2019-07-29 15:40 ` Corinna Vinschen
2019-07-29 18:56 ` Ken Brown
2019-07-31 15:53 ` Ken Brown
2019-07-31 18:00 ` Ken Brown
2019-08-01 9:01 ` Corinna Vinschen
2019-08-01 14:27 ` Jon Turney
2019-08-01 15:30 ` Ken Brown
2019-08-01 15:38 ` Eric Blake
2019-08-01 16:04 ` Corinna Vinschen
2019-08-01 21:17 ` Ken Brown
2019-08-02 2:32 ` Ken Brown
2019-08-02 14:34 ` Ken Brown
2019-08-02 15:04 ` Corinna Vinschen
2019-08-02 21:26 ` Brian Inglis
2019-08-02 21:53 ` Ken Brown
2019-08-02 21:58 ` Eric Blake
2019-08-03 3:50 ` Brian Inglis
2019-08-03 13:14 ` Ken Brown
2019-08-04 16:52 ` Houder
2019-08-01 10:03 ` Houder
2019-08-01 10:46 ` Houder
2019-08-01 12:20 ` Ken Brown
2019-08-01 14:29 ` Houder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ced2750a-0a52-1396-b6c1-f4228116bde7@cornell.edu \
--to=kbrown@cornell.edu \
--cc=cygwin@cygwin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).