* emacs-w32 not starting - missing dependency? @ 2016-08-19 13:55 Peter Hull 2016-08-19 14:17 ` Ken Brown 0 siblings, 1 reply; 13+ messages in thread From: Peter Hull @ 2016-08-19 13:55 UTC (permalink / raw) To: cygwin Hi all, When I type 'emacs' at the bash prompt, emacs does not start and the prompt re-appears very quickly as if nothing happened. 'emacs -Q' and 'emacs --version' do the same, nothing is printed. My alternatives are set such that emacs points to emacs-w32. I also have emacs-nox and that works fine. If I run 'strace emacs-w32' I get an error dialog: "The procedure entry point WebPDecode could not be located in the dynamic link library C:\cygwin\bin\cygMagickCore-6.Q16-2.dll." Is this a known problem? If not I can attach cygcheck.out and the output from strace if that will help. I am running 32-bit cygwin on 64-bit windows 10. Thanks, Peter -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - missing dependency? 2016-08-19 13:55 emacs-w32 not starting - missing dependency? Peter Hull @ 2016-08-19 14:17 ` Ken Brown 2016-08-19 18:59 ` Ken Brown 0 siblings, 1 reply; 13+ messages in thread From: Ken Brown @ 2016-08-19 14:17 UTC (permalink / raw) To: cygwin On 8/19/2016 6:27 AM, Peter Hull wrote: > Hi all, > > When I type 'emacs' at the bash prompt, emacs does not start and the > prompt re-appears very quickly as if nothing happened. 'emacs -Q' and > 'emacs --version' do the same, nothing is printed. > > My alternatives are set such that emacs points to emacs-w32. I also have > emacs-nox and that works fine. > > If I run 'strace emacs-w32' I get an error dialog: > > "The procedure entry point WebPDecode could not be located in the > dynamic link library C:\cygwin\bin\cygMagickCore-6.Q16-2.dll." Is your installation of libMagickCore6_2 up to date? I get $ objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll | grep WebPDecode 48ee2c 8 WebPDecode > Is this a known problem? If not I can attach cygcheck.out and the output > from strace if that will help. It's not a known problem. If updating your Cygwin installation doesn't help, please send cygcheck.out. Ken -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - missing dependency? 2016-08-19 14:17 ` Ken Brown @ 2016-08-19 18:59 ` Ken Brown 2016-08-19 20:43 ` Ken Brown 0 siblings, 1 reply; 13+ messages in thread From: Ken Brown @ 2016-08-19 18:59 UTC (permalink / raw) To: cygwin On 8/19/2016 9:55 AM, Ken Brown wrote: > On 8/19/2016 6:27 AM, Peter Hull wrote: >> Hi all, >> >> When I type 'emacs' at the bash prompt, emacs does not start and the >> prompt re-appears very quickly as if nothing happened. 'emacs -Q' and >> 'emacs --version' do the same, nothing is printed. >> >> My alternatives are set such that emacs points to emacs-w32. I also have >> emacs-nox and that works fine. >> >> If I run 'strace emacs-w32' I get an error dialog: >> >> "The procedure entry point WebPDecode could not be located in the >> dynamic link library C:\cygwin\bin\cygMagickCore-6.Q16-2.dll." > > Is your installation of libMagickCore6_2 up to date? I get > > $ objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll | grep WebPDecode > 48ee2c 8 WebPDecode > >> Is this a known problem? If not I can attach cygcheck.out and the output >> from strace if that will help. > > It's not a known problem. It is now. I can reproduce the problem (only on 32-bit Cygwin). I'll look into it. Ken -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - missing dependency? 2016-08-19 18:59 ` Ken Brown @ 2016-08-19 20:43 ` Ken Brown 2016-08-19 21:54 ` Ken Brown 2016-08-20 13:27 ` Ken Brown 0 siblings, 2 replies; 13+ messages in thread From: Ken Brown @ 2016-08-19 20:43 UTC (permalink / raw) To: cygwin On 8/19/2016 11:22 AM, Ken Brown wrote: > On 8/19/2016 9:55 AM, Ken Brown wrote: >> On 8/19/2016 6:27 AM, Peter Hull wrote: >>> Hi all, >>> >>> When I type 'emacs' at the bash prompt, emacs does not start and the >>> prompt re-appears very quickly as if nothing happened. 'emacs -Q' and >>> 'emacs --version' do the same, nothing is printed. >>> >>> My alternatives are set such that emacs points to emacs-w32. I also have >>> emacs-nox and that works fine. >>> >>> If I run 'strace emacs-w32' I get an error dialog: >>> >>> "The procedure entry point WebPDecode could not be located in the >>> dynamic link library C:\cygwin\bin\cygMagickCore-6.Q16-2.dll." >> >>> Is this a known problem? If not I can attach cygcheck.out and the output >>> from strace if that will help. >> >> It's not a known problem. > > It is now. I can reproduce the problem (only on 32-bit Cygwin). I'll > look into it. The problem turns out to be related to the recent update of libgd3. Reverting to the previous version fixes it. Notice that cygMagickCore-6.Q16-2.dll, which occurs in the error dialog above, depends on cyggd-3.dll: $ cygcheck /usr/bin/cygMagickCore-6.Q16-2.dll | grep cyggd-3 C:\cygwin\bin\cyggd-3.dll Marco, is it possible that the libgd3 update requires a rebuild of ImageMagick? Ken -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - missing dependency? 2016-08-19 20:43 ` Ken Brown @ 2016-08-19 21:54 ` Ken Brown 2016-08-20 13:27 ` Ken Brown 1 sibling, 0 replies; 13+ messages in thread From: Ken Brown @ 2016-08-19 21:54 UTC (permalink / raw) To: cygwin On 8/19/2016 4:03 PM, Ken Brown wrote: > On 8/19/2016 11:22 AM, Ken Brown wrote: >> On 8/19/2016 9:55 AM, Ken Brown wrote: >>> On 8/19/2016 6:27 AM, Peter Hull wrote: >>>> Hi all, >>>> >>>> When I type 'emacs' at the bash prompt, emacs does not start and the >>>> prompt re-appears very quickly as if nothing happened. 'emacs -Q' and >>>> 'emacs --version' do the same, nothing is printed. >>>> >>>> My alternatives are set such that emacs points to emacs-w32. I also >>>> have >>>> emacs-nox and that works fine. >>>> >>>> If I run 'strace emacs-w32' I get an error dialog: >>>> >>>> "The procedure entry point WebPDecode could not be located in the >>>> dynamic link library C:\cygwin\bin\cygMagickCore-6.Q16-2.dll." >>> >>>> Is this a known problem? If not I can attach cygcheck.out and the >>>> output >>>> from strace if that will help. >>> >>> It's not a known problem. >> >> It is now. I can reproduce the problem (only on 32-bit Cygwin). I'll >> look into it. > > The problem turns out to be related to the recent update of libgd3. > Reverting to the previous version fixes it. > > Notice that cygMagickCore-6.Q16-2.dll, which occurs in the error dialog > above, depends on cyggd-3.dll: > > $ cygcheck /usr/bin/cygMagickCore-6.Q16-2.dll | grep cyggd-3 > C:\cygwin\bin\cyggd-3.dll > > Marco, is it possible that the libgd3 update requires a rebuild of > ImageMagick? Here's some further info: objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll [...] DLL Name: cyggd-3.dll vma: Hint/Ord Member-Name Bound-To 48ee2c 8 WebPDecode [...] I assume this means that ImageMagick expects to find WebPDecode in cyggd-3.dll. And it was indeed there in the previous version of libgd3: $ objdump -p /usr/bin/cyggd-3.dll | grep WebPDecode [ 8] WebPDecode With the current libgd3, however, we get $ objdump -p /usr/bin/cyggd-3.dll [...] DLL Name: cygwebp-5.dll vma: Hint/Ord Member-Name Bound-To 5c0b4 272 WebPDecodeARGB [...] and there is no other occurrence of the string WebPDecode in the output. Ken -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - missing dependency? 2016-08-19 20:43 ` Ken Brown 2016-08-19 21:54 ` Ken Brown @ 2016-08-20 13:27 ` Ken Brown 2016-08-20 16:03 ` Marco Atzeri 1 sibling, 1 reply; 13+ messages in thread From: Ken Brown @ 2016-08-20 13:27 UTC (permalink / raw) To: cygwin On 8/19/2016 4:03 PM, Ken Brown wrote: > On 8/19/2016 11:22 AM, Ken Brown wrote: >> On 8/19/2016 9:55 AM, Ken Brown wrote: >>> On 8/19/2016 6:27 AM, Peter Hull wrote: >>>> Hi all, >>>> >>>> When I type 'emacs' at the bash prompt, emacs does not start and the >>>> prompt re-appears very quickly as if nothing happened. 'emacs -Q' and >>>> 'emacs --version' do the same, nothing is printed. >>>> >>>> My alternatives are set such that emacs points to emacs-w32. I also >>>> have >>>> emacs-nox and that works fine. >>>> >>>> If I run 'strace emacs-w32' I get an error dialog: >>>> >>>> "The procedure entry point WebPDecode could not be located in the >>>> dynamic link library C:\cygwin\bin\cygMagickCore-6.Q16-2.dll." >>> >>>> Is this a known problem? If not I can attach cygcheck.out and the >>>> output >>>> from strace if that will help. >>> >>> It's not a known problem. >> >> It is now. I can reproduce the problem (only on 32-bit Cygwin). I'll >> look into it. > > The problem turns out to be related to the recent update of libgd3. > Reverting to the previous version fixes it. > > Notice that cygMagickCore-6.Q16-2.dll, which occurs in the error dialog > above, depends on cyggd-3.dll: > > $ cygcheck /usr/bin/cygMagickCore-6.Q16-2.dll | grep cyggd-3 > C:\cygwin\bin\cyggd-3.dll > > Marco, is it possible that the libgd3 update requires a rebuild of > ImageMagick? Or maybe the issue is that the latest build of gd should have had an ABI bump. Volker? Ken -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - missing dependency? 2016-08-20 13:27 ` Ken Brown @ 2016-08-20 16:03 ` Marco Atzeri 2016-08-20 21:12 ` Ken Brown 0 siblings, 1 reply; 13+ messages in thread From: Marco Atzeri @ 2016-08-20 16:03 UTC (permalink / raw) To: cygwin On 20/08/2016 04:52, Ken Brown wrote: > On 8/19/2016 4:03 PM, Ken Brown wrote: >> On 8/19/2016 11:22 AM, Ken Brown wrote: >>> On 8/19/2016 9:55 AM, Ken Brown wrote: >>>> On 8/19/2016 6:27 AM, Peter Hull wrote: >>>>> Hi all, >> The problem turns out to be related to the recent update of libgd3. >> Reverting to the previous version fixes it. >> >> Notice that cygMagickCore-6.Q16-2.dll, which occurs in the error dialog >> above, depends on cyggd-3.dll: >> >> $ cygcheck /usr/bin/cygMagickCore-6.Q16-2.dll | grep cyggd-3 >> C:\cygwin\bin\cyggd-3.dll >> >> Marco, is it possible that the libgd3 update requires a rebuild of >> ImageMagick? > > Or maybe the issue is that the latest build of gd should have had an ABI > bump. Volker? > > Ken > It seems more a libgd3 build problem. Specially if it happens only on 32bit and not on 64bit. The removal of an interface requires a ABI bump at upstream level, but that it will happen for both arch versions. Regards Marco -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - missing dependency? 2016-08-20 16:03 ` Marco Atzeri @ 2016-08-20 21:12 ` Ken Brown 2016-08-21 21:36 ` emacs-w32 not starting - libgd3 problem Marco Atzeri 0 siblings, 1 reply; 13+ messages in thread From: Ken Brown @ 2016-08-20 21:12 UTC (permalink / raw) To: cygwin On 8/20/2016 9:41 AM, Marco Atzeri wrote: > On 20/08/2016 04:52, Ken Brown wrote: >> On 8/19/2016 4:03 PM, Ken Brown wrote: >>> On 8/19/2016 11:22 AM, Ken Brown wrote: >>>> On 8/19/2016 9:55 AM, Ken Brown wrote: >>>>> On 8/19/2016 6:27 AM, Peter Hull wrote: >>>>>> Hi all, > >>> The problem turns out to be related to the recent update of libgd3. >>> Reverting to the previous version fixes it. >>> >>> Notice that cygMagickCore-6.Q16-2.dll, which occurs in the error dialog >>> above, depends on cyggd-3.dll: >>> >>> $ cygcheck /usr/bin/cygMagickCore-6.Q16-2.dll | grep cyggd-3 >>> C:\cygwin\bin\cyggd-3.dll >>> >>> Marco, is it possible that the libgd3 update requires a rebuild of >>> ImageMagick? >> >> Or maybe the issue is that the latest build of gd should have had an ABI >> bump. Volker? >> >> Ken >> > > It seems more a libgd3 build problem. > Specially if it happens only on 32bit and not on 64bit. The difference between 32-bit and 64-bit is due to differences in ImageMagick on the two platforms. On 32-bit, as I showed in an earlier message, I get: $ objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll [...] DLL Name: cyggd-3.dll vma: Hint/Ord Member-Name Bound-To 48ee2c 8 WebPDecode [...] On 64-bit, I get: $ objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll [...] DLL Name: cygwebp-5.dll vma: Hint/Ord Member-Name Bound-To [...] 48096c 271 WebPDecode [...] Moreover, libMagickCore6_2 depends on libgd3 on 32-bit but not 64-bit. So it seems that ImageMagick needs to be rebuilt on 32-bit so as to remove this dependency. Ken -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - libgd3 problem 2016-08-20 21:12 ` Ken Brown @ 2016-08-21 21:36 ` Marco Atzeri 2016-08-21 23:33 ` Ken Brown 0 siblings, 1 reply; 13+ messages in thread From: Marco Atzeri @ 2016-08-21 21:36 UTC (permalink / raw) To: cygwin On 20/08/2016 18:54, Ken Brown wrote: > On 8/20/2016 9:41 AM, Marco Atzeri wrote: >> On 20/08/2016 04:52, Ken Brown wrote: >>> On 8/19/2016 4:03 PM, Ken Brown wrote: >>>> On 8/19/2016 11:22 AM, Ken Brown wrote: >>>>> On 8/19/2016 9:55 AM, Ken Brown wrote: >>>>>> On 8/19/2016 6:27 AM, Peter Hull wrote: >>>>>>> Hi all, >> >> >> It seems more a libgd3 build problem. >> Specially if it happens only on 32bit and not on 64bit. > > The difference between 32-bit and 64-bit is due to differences in > ImageMagick on the two platforms. > > On 32-bit, as I showed in an earlier message, I get: > > $ objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll > [...] > DLL Name: cyggd-3.dll > vma: Hint/Ord Member-Name Bound-To > 48ee2c 8 WebPDecode > [...] > > On 64-bit, I get: > > $ objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll > [...] > DLL Name: cygwebp-5.dll > vma: Hint/Ord Member-Name Bound-To > [...] > 48096c 271 WebPDecode > [...] > > Moreover, libMagickCore6_2 depends on libgd3 on 32-bit but not 64-bit. > So it seems that ImageMagick needs to be rebuilt on 32-bit so as to > remove this dependency. > > Ken > Hi Ken, the 32bit depends on both /usr/bin/cyggd-3.dll => libgd3-2.1.1-2 /usr/bin/cygwebp-5.dll => libwebp5-0.4.4-1 the 64 bit is missing the first. So in theory I should rebuild the 64 one to include the libgd3 dependency. You can verify with objdump -x cygMagickCore-6.Q16-2.dll|grep DLL |sort The libgd3-2.1.1-2 has on both 32 and 64 bit $ objdump -x cyggd-3.dll |grep WebP [ 8] WebPDecode [ 9] WebPEncode [ 10] WebPGetInfo [ 11] WebPGetPSNR So before my rebuild we need to understand what's happened to libgd3. Regards Marco -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - libgd3 problem 2016-08-21 21:36 ` emacs-w32 not starting - libgd3 problem Marco Atzeri @ 2016-08-21 23:33 ` Ken Brown 2016-08-22 8:00 ` Yaakov Selkowitz 2016-08-22 9:57 ` Peter Hull 0 siblings, 2 replies; 13+ messages in thread From: Ken Brown @ 2016-08-21 23:33 UTC (permalink / raw) To: cygwin On 8/21/2016 11:24 AM, Marco Atzeri wrote: > On 20/08/2016 18:54, Ken Brown wrote: >> On 8/20/2016 9:41 AM, Marco Atzeri wrote: >>> On 20/08/2016 04:52, Ken Brown wrote: >>>> On 8/19/2016 4:03 PM, Ken Brown wrote: >>>>> On 8/19/2016 11:22 AM, Ken Brown wrote: >>>>>> On 8/19/2016 9:55 AM, Ken Brown wrote: >>>>>>> On 8/19/2016 6:27 AM, Peter Hull wrote: >>>>>>>> Hi all, >>> > >>> >>> It seems more a libgd3 build problem. >>> Specially if it happens only on 32bit and not on 64bit. >> >> The difference between 32-bit and 64-bit is due to differences in >> ImageMagick on the two platforms. >> >> On 32-bit, as I showed in an earlier message, I get: >> >> $ objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll >> [...] >> DLL Name: cyggd-3.dll >> vma: Hint/Ord Member-Name Bound-To >> 48ee2c 8 WebPDecode >> [...] >> >> On 64-bit, I get: >> >> $ objdump -p /usr/bin/cygMagickCore-6.Q16-2.dll >> [...] >> DLL Name: cygwebp-5.dll >> vma: Hint/Ord Member-Name Bound-To >> [...] >> 48096c 271 WebPDecode >> [...] >> >> Moreover, libMagickCore6_2 depends on libgd3 on 32-bit but not 64-bit. >> So it seems that ImageMagick needs to be rebuilt on 32-bit so as to >> remove this dependency. >> >> Ken >> > > Hi Ken, > the 32bit depends on both > > /usr/bin/cyggd-3.dll => libgd3-2.1.1-2 > /usr/bin/cygwebp-5.dll => libwebp5-0.4.4-1 > > the 64 bit is missing the first. > So in theory I should rebuild the 64 one to include the libgd3 > dependency. > > You can verify with > objdump -x cygMagickCore-6.Q16-2.dll|grep DLL |sort > > The libgd3-2.1.1-2 has on both 32 and 64 bit > > $ objdump -x cyggd-3.dll |grep WebP > [ 8] WebPDecode > [ 9] WebPEncode > [ 10] WebPGetInfo > [ 11] WebPGetPSNR > > So before my rebuild we need to understand what's happened to > libgd3. OK, let's wait to hear from Volker (or maybe Yaakov has some insight?). BTW, I've looked at the sources for gd-2.2.3-1, and the string "WebPDecode" appears only once, in a call to WebPDecodeARGB. So I don't understand why there wasn't an ABI bump between versions 2.1.1 and 2.2.3. Ken -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - libgd3 problem 2016-08-21 23:33 ` Ken Brown @ 2016-08-22 8:00 ` Yaakov Selkowitz 2016-08-22 9:57 ` Peter Hull 1 sibling, 0 replies; 13+ messages in thread From: Yaakov Selkowitz @ 2016-08-22 8:00 UTC (permalink / raw) To: cygwin On Sun, 2016-08-21 at 18:03 -0400, Ken Brown wrote: > On 8/21/2016 11:24 AM, Marco Atzeri wrote: > > the 32bit depends on both > > > > /usr/bin/cyggd-3.dll  =>  libgd3-2.1.1-2 > > /usr/bin/cygwebp-5.dll  =>  libwebp5-0.4.4-1 > > > > the 64 bit is missing  the first. > > So in theory I should rebuild the 64 one to include the libgd3 > > dependency. > > > > You can verify with > > objdump -x  cygMagickCore-6.Q16-2.dll|grep DLL |sort > > > > The libgd3-2.1.1-2 has on both 32 and 64 bit > > > >  $ objdump -x cyggd-3.dll |grep WebP > >         [   8] WebPDecode > >         [   9] WebPEncode > >         [  10] WebPGetInfo > >         [  11] WebPGetPSNR > > > > So before my rebuild we need to understand what's happened to > > libgd3. > > OK, let's wait to hear from Volker (or maybe Yaakov has some > insight?). AFAICS ImageMagick should be rebuilt, and the result should be a dependency on libwebp5 and not libgd3. > BTW, I've looked at the sources for gd-2.2.3-1, and the string > "WebPDecode" appears only once, in a call to WebPDecodeARGB.  So I > don't understand why there wasn't an ABI bump between versions 2.1.1 > and 2.2.3. That's because it was supposed to be an internal symbol which was only mistakenly exposed for linking (unfortunately we don't have ELF visibility support).  Some background: https://github.com/libgd/libgd/issues/129 https://github.com/libgd/libgd/commit/a79232c5fa692c3b6e3f5bc95ecfc4554 24c3f54 https://github.com/libgd/libgd/commit/824a3aaa37b422779166ccc0ffc17e777 f8cf291 -- Yaakov -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - libgd3 problem 2016-08-21 23:33 ` Ken Brown 2016-08-22 8:00 ` Yaakov Selkowitz @ 2016-08-22 9:57 ` Peter Hull 2016-08-22 13:23 ` Ken Brown 1 sibling, 1 reply; 13+ messages in thread From: Peter Hull @ 2016-08-22 9:57 UTC (permalink / raw) To: cygwin On 21/08/16 23:03, Ken Brown wrote: > OK, let's wait to hear from Volker (or maybe Yaakov has some insight?). > > BTW, I've looked at the sources for gd-2.2.3-1, and the string > "WebPDecode" appears only once, in a call to WebPDecodeARGB. So I > don't understand why there wasn't an ABI bump between versions 2.1.1 > and 2.2.3. Thanks very much everyone for looking into this issue. In the interim, is there a way for me to get emacs running again by using cygwin setup to install an earlier version of ImageMagick (or gd?) Thanks, Pete -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: emacs-w32 not starting - libgd3 problem 2016-08-22 9:57 ` Peter Hull @ 2016-08-22 13:23 ` Ken Brown 0 siblings, 0 replies; 13+ messages in thread From: Ken Brown @ 2016-08-22 13:23 UTC (permalink / raw) To: cygwin On 8/22/2016 3:17 AM, Peter Hull wrote: > On 21/08/16 23:03, Ken Brown wrote: >> OK, let's wait to hear from Volker (or maybe Yaakov has some insight?). >> >> BTW, I've looked at the sources for gd-2.2.3-1, and the string >> "WebPDecode" appears only once, in a call to WebPDecodeARGB. So I >> don't understand why there wasn't an ABI bump between versions 2.1.1 >> and 2.2.3. > > Thanks very much everyone for looking into this issue. In the interim, > is there a way for me to get emacs running again by using cygwin setup > to install an earlier version of ImageMagick (or gd?) Install the previous version (2.1.1-2) of libgd3. Ken -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-08-22 12:40 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-08-19 13:55 emacs-w32 not starting - missing dependency? Peter Hull 2016-08-19 14:17 ` Ken Brown 2016-08-19 18:59 ` Ken Brown 2016-08-19 20:43 ` Ken Brown 2016-08-19 21:54 ` Ken Brown 2016-08-20 13:27 ` Ken Brown 2016-08-20 16:03 ` Marco Atzeri 2016-08-20 21:12 ` Ken Brown 2016-08-21 21:36 ` emacs-w32 not starting - libgd3 problem Marco Atzeri 2016-08-21 23:33 ` Ken Brown 2016-08-22 8:00 ` Yaakov Selkowitz 2016-08-22 9:57 ` Peter Hull 2016-08-22 13:23 ` Ken Brown
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).