* [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1
@ 2001-03-05 21:28 Kevin Wright
2001-03-06 5:38 ` Cygwin w3m (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Jason Tishler
2001-03-06 14:14 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Sagar R. Shah
0 siblings, 2 replies; 12+ messages in thread
From: Kevin Wright @ 2001-03-05 21:28 UTC (permalink / raw)
To: Cygwin-Mailing-List
It has finally arrived! GNU Ghostscript 5.50-1!
This is located in cygwin/contrib.
The reason for using GNU Ghostscript is due its use of the
GNU GPL. In the future, we may review the Alladin license
and use that one instead.
NOTE: This program requires files from the xfree86:
(see FAQ: http://xfree86.cygwin.com/faq.html )
I have included the fonts which get installed to the
/usr/share/ghostscript/fonts directory.
You can find documentation in /usr/doc/gs5.50. These are all
html files, so use lynx, w3m or some other browser to view
these files. (NOTE: I have ported lynx and w3m if anyone is
interested)
===================================================================
PLEASE READ THE README FILE: /usr/doc/Cygwin/gs5.50.README
===================================================================
The mirror sites will get this version at least tomorrow.
I checked the mirrors and found at least one mirror (ftp.nas.nasa.gov)
to already have this package.
To update your installation, click on the "Install Cygwin now" link on
the http://sources.redhat.com/cygwin web page. This downloads setup.exe
to your system.
Run setup and answer all of the questions. I won't ask you to use a
mirror site, because that's all that's currently available. The
'sources.redhat.com' site has had downloading disabled.
Note that if this is the first time that you've run the new GUI version
of setup, it will currently download the whole cygwin net release again.
After this point it will only download what is needed.
If you have questions or comments, please send them to the Cygwin
mailing list at: cygwin@sources.redhat.com . I would appreciate
if you would use this mailing list rather than emailing me directly.
This includes ideas and comments about the setup utility or Cygwin
in general.
If you want to make a point or ask a question the Cygwin mailing list is
the appropriate place.
*** CYGWIN-ANNOUNCE UNSUBSCRIBE INFO ***
If you want to unsubscribe to the cygwin-announce mailing list, look
at the "List-Unsubscribe: " tag in the email header of this message.
Send email to the address specified there. It will be in the format:
cygwin-announce-unsubscribe-you=yourdomain.com@cygwin.com
--
Kevin Wright Please, send mails regarding Cygwin
to
Ghostscript Maintainer
mailto:cygwin@cygwin.com
kwright@sources.redhat.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Cygwin w3m (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1)
2001-03-05 21:28 [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1 Kevin Wright
@ 2001-03-06 5:38 ` Jason Tishler
2001-03-06 14:14 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Sagar R. Shah
1 sibling, 0 replies; 12+ messages in thread
From: Jason Tishler @ 2001-03-06 5:38 UTC (permalink / raw)
To: Kevin Wright; +Cc: Cygwin-Mailing-List
On Mon, Mar 05, 2001 at 09:27:49PM -0800, Kevin Wright wrote:
> (NOTE: I have ported lynx and w3m if anyone is interested)
I'm very interested in your Cygwin w3m port. Please post your patches
to cygwin-apps.
Thanks,
Jason
--
Jason Tishler
Director, Software Engineering Phone: +1 (732) 264-8770 x235
Dot Hill Systems Corp. Fax: +1 (732) 264-8798
82 Bethany Road, Suite 7 Email: Jason.Tishler@dothill.com
Hazlet, NJ 07730 USA WWW: http://www.dothill.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1)
2001-03-05 21:28 [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1 Kevin Wright
2001-03-06 5:38 ` Cygwin w3m (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Jason Tishler
@ 2001-03-06 14:14 ` Sagar R. Shah
2001-03-07 0:53 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Dr. Volker Zell
2001-03-07 2:01 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Malcolm Boekhoff
1 sibling, 2 replies; 12+ messages in thread
From: Sagar R. Shah @ 2001-03-06 14:14 UTC (permalink / raw)
To: Kevin Wright; +Cc: Cygwin-Mailing-List
On Mon, 5 Mar 2001, Kevin Wright wrote:
> these files. (NOTE: I have ported lynx and w3m if anyone is
> interested)
Would it be possibile to place binaries in cygwin/contrib also?
Or at least put the sources or some information re the port somewhere?
I think the port of lynx linked from the cygwin site has an 'error' relating
to its use of cp (mentioned last month in another thread), so if you have a
fully working port it would be nice if the rest of us could get our hands on
it ;-)
hadn't really heard of w3m till u mentioned it, but having done a bit of
reading on the web, it also looks like something that would be nice to play
with at some point.
so please, pretty please, pretty please with sugar on top ;-)
Sagar
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1)
2001-03-06 14:14 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Sagar R. Shah
@ 2001-03-07 0:53 ` Dr. Volker Zell
2001-03-07 1:41 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Sagar R. Shah
2001-03-08 7:31 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Jason Tishler
2001-03-07 2:01 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Malcolm Boekhoff
1 sibling, 2 replies; 12+ messages in thread
From: Dr. Volker Zell @ 2001-03-07 0:53 UTC (permalink / raw)
To: Sagar R. Shah; +Cc: Kevin Wright, Cygwin-Mailing-List
diff -upr /gnu/w3m-0.1.10/XXMakefile w3m-0.1.10/XXMakefile
--- /gnu/w3m-0.1.10/XXMakefile Tue Jun 6 09:18:45 2000
+++ w3m-0.1.10/XXMakefile Tue Mar 6 18:37:46 2001
@@ -3,21 +3,21 @@
BIN_DIR = /usr/local/bin
HELP_DIR = /usr/local/lib/w3m
LIB_DIR = /usr/local/lib/w3m
-HELP_FILE = w3mhelp-w3m_ja.html
-SYS_LIBRARIES = -lgpm -lbsd -lnsl -lncurses
+HELP_FILE = w3mhelp-w3m_en.html
+SYS_LIBRARIES = -lncurses -L/usr/lib -lssl -lcrypto
LOCAL_LIBRARIES =
CC = gcc
-MYCFLAGS = -O -Wall -I./gc
+MYCFLAGS = -O -Wall -I./gc -I/usr/include/openssl -I/usr/include
KEYBIND_SRC = keybind.c
KEYBIND_OBJ = keybind.o
-EXT=
+EXT=.exe
MATHLIB=-lm
GCLIB=gc/gc.a
GCTARGET=gc/gc.a
RANLIB=ranlib
MKDIR=mkdir -p
VERSION=0.1.10
-MODEL=Linux.i686-cookie-ja
+MODEL=CYGWIN.i686-monster-en
#else
SRCS=main.c file.c buffer.c display.c etc.c search.c linein.c table.c local.c \
form.c map.c frame.c rc.c menu.c mailcap.c\
diff -upr /gnu/w3m-0.1.10/config.h w3m-0.1.10/config.h
--- /gnu/w3m-0.1.10/config.h Tue Jun 6 09:18:26 2000
+++ w3m-0.1.10/config.h Tue Mar 6 18:11:48 2001
@@ -11,50 +11,50 @@
If you define DICT, you can use dictionary look-up function
in w3m. See README.dict for detail.
*/
-#undef DICT
+#define DICT
/*
If you define USE_MARK, you can use set-mark (C-SPC),
goto-next-mark (ESC p), goto-next-mark (ESC n) and
mark-by-regexp (").
*/
-#undef USE_MARK
+#define USE_MARK
/*
If you want to load and save URL history.
*/
-#undef USE_HISTORY
+#define USE_HISTORY
/*
BG_COLOR enables w3m to set background color.
*/
-#undef BG_COLOR
+#define BG_COLOR
/*
VIEW_UNSEENOBJECTS enables w3m to make a link to unseen objects.
e.g. background image.
*/
-#undef VIEW_UNSEENOBJECTS
+#define VIEW_UNSEENOBJECTS
/*
VI_PREC_NUM enables vi-like behavior for '2 SPC' or '2 b'
*/
-#undef VI_PREC_NUM
+#define VI_PREC_NUM
/*
* Do word fill
*/
-#undef FORMAT_NICE
+#define FORMAT_NICE
/*
* Support Gopher protocol
*/
-#undef USE_GOPHER
+#define USE_GOPHER
/*
* Support NNTP
*/
-#undef USE_NNTP
+#define USE_NNTP
/*
* Enable id attribute
@@ -72,44 +72,44 @@
BIN_DIR = /usr/local/bin
HELP_DIR = /usr/local/lib/w3m
LIB_DIR = /usr/local/lib/w3m
-HELP_FILE = w3mhelp-w3m_ja.html
-SYS_LIBRARIES = -lgpm -lbsd -lnsl -lncurses
+HELP_FILE = w3mhelp-w3m_en.html
+SYS_LIBRARIES = -lncurses -L/usr/lib -lssl -lcrypto
LOCAL_LIBRARIES =
CC = gcc
-MYCFLAGS = -O -Wall -I./gc
+MYCFLAGS = -O -Wall -I./gc -I/usr/include/openssl -I/usr/include
KEYBIND_SRC = keybind.c
KEYBIND_OBJ = keybind.o
-EXT=
+EXT=.exe
MATHLIB=-lm
GCLIB=gc/gc.a
GCTARGET=gc/gc.a
RANLIB=ranlib
MKDIR=mkdir -p
VERSION=0.1.10
-MODEL=Linux.i686-cookie-ja
+MODEL=CYGWIN.i686-monster-en
#else
+#define CYGWIN
-
-#define DISPLAY_CODE 'E'
+#define DISPLAY_CODE 'x'
#define JA 0
#define EN 1
-#define LANG JA
-#define KANJI_SYMBOLS
+#define LANG EN
+#undef KANJI_SYMBOLS
#define COLOR
#define MOUSE
-#define USE_GPM
+
#undef USE_SYSMOUSE
#define MENU
#define USE_COOKIE
-#undef USE_SSL
+#define USE_SSL
#undef USE_SSL_VERIFY
#undef FTPPASS_HOSTNAMEGEN
-#undef SHOW_PARAMS
+#define SHOW_PARAMS
-#define DEF_EDITOR "/bin/vi"
-#define DEF_MAILER "/bin/mail"
-#define DEF_EXT_BROWSER "/usr/X11R6/bin/netscape"
+#define DEF_EDITOR "/usr/bin/vi"
+#define DEF_MAILER "/usr/local/sbin/sendmail"
+#define DEF_EXT_BROWSER "/usr/local/bin/netscape"
#define LIB_DIR "/usr/local/lib/w3m"
#define HELP_DIR "/usr/local/lib/w3m"
@@ -127,7 +127,7 @@ MODEL=Linux.i686-cookie-ja
#define USER_MAILCAP "~/.mailcap"
#define SYS_MAILCAP "/etc/mailcap"
#define USER_MIMETYPES "~/.mime.types"
-#define SYS_MIMETYPES "/usr/lib/mime.types"
+#define SYS_MIMETYPES "/usr/local/lib/mosaic/mime.types"
#define DEF_SAVE_FILE "index.html"
@@ -158,7 +158,7 @@ typedef void MySignalHandler;
/*
If you want to use IPv6, define this symbol.
*/
-#undef INET6
+/* #define INET6 */
#undef TABLE_EXPAND
#define NOWRAP 1
diff -upr /gnu/w3m-0.1.10/config.param w3m-0.1.10/config.param
--- /gnu/w3m-0.1.10/config.param Tue Jun 6 09:18:23 2000
+++ w3m-0.1.10/config.param Tue Mar 6 17:36:58 2001
@@ -1,23 +1,22 @@
-# Configuretion at ei5unix.yz.yamagata-u.ac.jp
+# Configuretion at VZELL
def_bindir='/usr/local/bin'
def_libdir='/usr/local/lib/w3m'
def_helpdir='/usr/local/lib/w3m'
-pref_lang=1
-def_dcode=E
+pref_lang=2
lynx_key=n
-kanji_symbols=y
ftppass_hostnamegen=n
-show_params=n
-use_nntp=n
+show_params=y
+use_nntp=y
use_color=y
use_menu=y
use_mouse=y
use_cookie=y
-use_ssl=n
-dmodel=4
-ded='/bin/vi'
-dmail='/bin/mail'
-dbrowser='/usr/X11R6/bin/netscape'
+use_ssl=y
+dmodel=5
+use_ssl_verify=n
+ded='/usr/bin/vi'
+dmail='/usr/local/sbin/sendmail'
+dbrowser='/usr/local/bin/netscape'
dcc='gcc'
dcflags='-O -Wall'
dtermlib='-lncurses'
diff -upr /gnu/w3m-0.1.10/display.c w3m-0.1.10/display.c
--- /gnu/w3m-0.1.10/display.c Tue Jun 6 07:39:13 2000
+++ w3m-0.1.10/display.c Tue Mar 6 17:39:23 2001
@@ -717,8 +717,10 @@ cursorRight(Buffer * buf)
}
else {
buf->pos = l->len -1;
+#ifdef JP_CHARSET
if (CharType(p[buf->pos]) == PC_KANJI2)
buf->pos--;
+#endif
}
cpos = COLPOS(l, buf->pos);
buf->visualpos = cpos - buf->currentColumn;
Sagar> Sagar
Ciao
Volker
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1)
2001-03-07 0:53 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Dr. Volker Zell
@ 2001-03-07 1:41 ` Sagar R. Shah
2001-03-08 7:31 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Jason Tishler
1 sibling, 0 replies; 12+ messages in thread
From: Sagar R. Shah @ 2001-03-07 1:41 UTC (permalink / raw)
To: Dr. Volker Zell; +Cc: Cygwin-Mailing-List
On 7 Mar 2001, Dr. Volker Zell wrote:
> This works for me.
> o w3m-0.1.10 - http://ei5nazha.yz.yamagata-u.ac.jp/~aito/w3m/eng/ -
> ftp://ftp.firedrake.org/w3m/
A little while ago i actually took a peek at www.w3m.org, and there are
references to cygwin itself, and in /download/binary/i386, there do seem to
be binaries (although for 0.1.9 rather than 0.1.10). I did quickly download
and run one of the binaries...seemed to work fine...but text didn't seem to
wrap properly....dunno whether that's a bug in w3m fullstop, or just in that
particalar binary.
Thanks for that patch Volker :-) I'll try it later today, maybe it might
even fix the wrapping problem.
Sagar
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1)
2001-03-06 14:14 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Sagar R. Shah
2001-03-07 0:53 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Dr. Volker Zell
@ 2001-03-07 2:01 ` Malcolm Boekhoff
1 sibling, 0 replies; 12+ messages in thread
From: Malcolm Boekhoff @ 2001-03-07 2:01 UTC (permalink / raw)
To: Cygwin News Group
I have previously posted a /bin/sh script that compile lynx2.8.4 on the latest Cygwin,
Cygwin DLL version info:
dll major: 1001
dll minor: 8
dll epoch: 19
dll bad signal mask: 19005
dll old termios: 5
dll malloc env: 28
api major: 0
api minor: 34
shared data: 3
dll identifier: cygwin1
mount registry: 2
cygnus registry name: Cygnus Solutions
cygwin registry name: Cygwin
program options name: Program Options
cygwin mount registry name: mounts v2
cygdrive flags: cygdrive flags
cygdrive prefix: cygdrive prefix
cygdrive default prefix:
build date: Wed Jan 31 10:08:38 EST 2001
shared id: cygwin1S3
Here it is again:
#!/bin/sh
# Extract the files:
#
# cd /
# tar xzf /d/mcb/download/lynx/current/lynx2.8.4dev.18.tar.gz
# Execute this script like this:
#
# sh -x ~/bin/makeLynx.sh -f 2>&1 | tee /tmp/lynx.log
# Make a link from "gawk" to "awk" (awk is used in one of the scripts).
if [ ! -h /bin/awk.exe ]; then
rm -f /bin/awk.exe
ln -s /bin/gawk.exe /bin/awk.exe
fi
cd /lynx2-8-4
# Parse command-line options to this script.
FULL=0
for option
do
case $option in
-f) FULL=1;;
esac
done
# Configure seems to have a problem when PATHs contain spaces.
PATH=`echo $PATH | tr : \\\\n | tr [A-Z] [a-z] | sed "/program files/d" | tr \\\\n :`; export PATH
# Unfortunately, "make install" don't work when "INSTALL" exists!
mv -f INSTALL INSTALL.original
# Clean everything out if "-f" argument specified to this script.
if [ "${FULL}" = "1" ]; then
make distclean
rm -f rm.exe.stackdump
rm -f config.cache
rm -f config.status
rm -f makefile
rm -f lynx_cfg.h
rm -f config.log
rm -f cfg_defs.h
rm -f help_files.sed
rm -f LYHelp.h
find . \( -name '*.o' -o -name '*.a' \) -exec rm {} ";"
# "configure" options
# --------------------
# Usage: configure [options] [host]
# Options: [defaults in brackets after descriptions]
# Configuration:
# --cache-file=FILE cache test results in FILE
# --help print this message
# --no-create do not create output files
# --quiet, --silent do not print `checking...' messages
# --version print the version of autoconf that created configure
# Directory and file names:
# --prefix=PREFIX install architecture-independent files in PREFIX
# [/usr/local]
# --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
# [same as prefix]
# --bindir=DIR user executables in DIR [EPREFIX/bin]
# --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
# --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
# --datadir=DIR read-only architecture-independent data in DIR
# [PREFIX/share]
# --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
# --sharedstatedir=DIR modifiable architecture-independent data in DIR
# [PREFIX/com]
# --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
# --libdir=DIR object code libraries in DIR [EPREFIX/lib] THIS IS WHERE lynx.cfg IS INSTALLED TO!
# --includedir=DIR C header files in DIR [PREFIX/include]
# --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
# --infodir=DIR info documentation in DIR [PREFIX/info]
# --mandir=DIR man documentation in DIR [PREFIX/man]
# --srcdir=DIR find the sources in DIR [configure dir or ..]
# --program-prefix=PREFIX prepend PREFIX to installed program names
# --program-suffix=SUFFIX append SUFFIX to installed program names
# --program-transform-name=PROGRAM
# run sed PROGRAM on installed program names
# Host type:
# --build=BUILD configure for building on BUILD [BUILD=HOST]
# --host=HOST configure for HOST [guessed]
# --target=TARGET configure for TARGET [TARGET=HOST]
# Features and packages:
# --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
# --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
# --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
# --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
# --x-includes=DIR X include files are in DIR
# --x-libraries=DIR X library files are in DIR
# --enable and --with options recognized:
# Development Options:
# --disable-echo display "compiling" commands
# --enable-find-leaks logic for testing memory leaks
# --enable-debug compile w/ debugging (if $CFLAGS is set, add -g there, too)
# --disable-trace disable logic for trace code
# --enable-warnings GCC compiler warnings
# Basic Configuration Options:
# --enable-nls use Native Language Support
# --with-included-gettext use the GNU gettext library included here
# --with-catgets use catgets functions if available
# --enable-included-msgs use included messages, for i18n support
# --with-nls-datadir=DIR NLS data, parent of locale (default: PREFIX/DATADIR)
# --disable-full-paths control whether full utility pathnames are used
# --with-ssl[=path] link with ssl library if available
# --with-socks[=path] link with socks library if available
# --with-socks5[=path] link with socks5 library if available
# --with-screen=XXX select screen type
# (XXX is curses (default), ncurses or slang)
# --with-charsets=list limit charsets to given list of MIME names
# Experimental Options:
# --disable-bibp-urls disable support for bibp: URLs
# --disable-config-info disable browsable configuration-info
# --disable-forms-options disable experimental forms-based options
# --disable-menu-options disable old-style option menu
# --enable-addrlist-page use experimental address-list page
# --enable-charset-choice use experimental charset-selection logic
# --enable-cjk use experimental CJK logic
# --enable-color-style use optional/experimental color style (ncurses/curses)
# --enable-default-colors enable use of default-colors (ncurses/slang)
# --enable-file-upload use experimental file-upload support
# --enable-htmlized-cfg build experimental htmlized lynx.cfg
# --enable-ipv6 use experimental ipv6 (with ipv4) support
# --enable-justify-elts use experimental element-justification logic
# --enable-kbd-layout use experimental keyboard-layout support
# --enable-libjs use experimental JavaScript support (Mozilla libjs)
# --enable-prettysrc colorize HTML source
# --enable-read-eta experimental read-progress message shows ETA
# --enable-scrollbar use experimental scrollbar, with mouse
# --enable-source-cache cache HTML source for parse mode changes
# Miscellaneous Options:
# --disable-alt-bindings disable alternative line-edit bindings
# --disable-extended-dtd disable extended HTML DTD logic
# --disable-partial use partial-display logic
# --enable-externs use external commands
# --enable-font-switch use Linux setfont for character-translation
# --enable-cgi-links support cgi links w/o a http daemon
# --enable-change-exec allow users to change exec options
# --enable-exec-links allow lynx to execute programs accessed via a link
# --enable-exec-scripts allow lynx to execute programs inferred from a link
# --enable-internal-links handle following links to same doc differently
# --enable-nsl-fork fork NSL requests, allowing them to be aborted
# --enable-syslog log URL requests via syslog
# --disable-persistent-cookies disable persistent-cookie support
# --enable-underlines underline links rather than using boldface
# --enable-gzip-help install gzip'ed help files
# --with-zlib use zlib for decompression of some gzip files
# --disable-finger disable FINGER logic
# --disable-gopher disable GOPHER logic
# --disable-news disable NEWS logic
# --disable-ftp disable FTP logic
# Directory Editor Options:
# --disable-dired disable optional directory-editor, DirEd
# --disable-dired-archive disable dearchiving commands
# --disable-dired-override disable DirEd override keymap
# --disable-dired-permit disable chmod/attrib commands
# --disable-dired-xpermit disable chmod/attrib commands
# --disable-dired-tar disable "tar" command
# --disable-dired-uudecode disable "uudecode" command
# --disable-dired-zip disable "zip", "unzip" commands
# --disable-dired-gzip disable "gzip", "gunzip" commands
# --disable-long-list disable long "ls -l" directory listings
# --disable-parent-dir-refs
# disable "Up-to" links in directory listings
# Special Libraries for PDCurses X11:
# --with-x use the X Window System
# --with-Xaw3d link with Xaw 3d library
# --with-neXtaw link with neXT Athena library
# The "configure" script writes "CPPFLAGS=<value of CPPFLAGS variable" into the makefile.
# Use "--libdir=/etc/lynx.cfg", if you want lynx.cfg copied to somewhere other than "/usr/local/lib" by "make install".
CPPFLAGS=-I/usr/include/ncurses sh $SHOPT configure \
--enable-change-exec \
--enable-default-colors \
--enable-exec-links \
--enable-exec-scripts \
--enable-externs \
--enable-gzip-help \
--enable-nsl-fork \
--enable-prettysrc \
--enable-source-cache \
--enable-syslog \
--enable-underlines \
--with-screen=ncurses \
--with-ssl \
--with-zlib \
--disable-full-paths
fi
make
make install
make install-help
make install-doc
----- Original Message -----
From: "Sagar R. Shah" <Sagar.Shah@sid.cam.ac.uk>
To: "Kevin Wright" <kevin@wright.org>
Cc: "Cygwin-Mailing-List" <cygwin@cygwin.com>
Sent: Tuesday, March 06, 2001 10:15 PM
Subject: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1)
> On Mon, 5 Mar 2001, Kevin Wright wrote:
> > these files. (NOTE: I have ported lynx and w3m if anyone is
> > interested)
>
> Would it be possibile to place binaries in cygwin/contrib also?
> Or at least put the sources or some information re the port somewhere?
>
> I think the port of lynx linked from the cygwin site has an 'error' relating
> to its use of cp (mentioned last month in another thread), so if you have a
> fully working port it would be nice if the rest of us could get our hands on
> it ;-)
>
> hadn't really heard of w3m till u mentioned it, but having done a bit of
> reading on the web, it also looks like something that would be nice to play
> with at some point.
>
> so please, pretty please, pretty please with sugar on top ;-)
>
> Sagar
>
>
>
>
> --
> Want to unsubscribe from this list?
> Check out: http://cygwin.com/ml/#unsubscribe-simple
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1)
2001-03-07 0:53 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Dr. Volker Zell
2001-03-07 1:41 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Sagar R. Shah
@ 2001-03-08 7:31 ` Jason Tishler
2001-03-08 13:20 ` Robert Collins
2001-03-09 1:10 ` Dr. Volker Zell
1 sibling, 2 replies; 12+ messages in thread
From: Jason Tishler @ 2001-03-08 7:31 UTC (permalink / raw)
To: Dr. Volker Zell; +Cc: Sagar R. Shah, Kevin Wright, Cygwin-Mailing-List
Volker,
On Wed, Mar 07, 2001 at 09:57:48AM +0100, Dr. Volker Zell wrote:
Content-Description: Patch for w3m-0.1.10 - http://ei5nazha.yz.yamagata-u.ac.jp/~aito/w3m/eng/ - ftp://ftp.firedrake.org/w3m/
Thanks for your patch.
I was able to build w3m-0.1.10 after applying it with only one minor
hiccup. I applied your patch and then ran configure. Due to this, I
had to re-comment out #define INET6 in config.h. Should I have applied
your patch after running configure?
Otherwise, w3m built cleanly.
Have you submitted your patch so hopefully the next version of w3m will
build OOTB under Cygwin?
Thanks,
Jason
--
Jason Tishler
Director, Software Engineering Phone: +1 (732) 264-8770 x235
Dot Hill Systems Corp. Fax: +1 (732) 264-8798
82 Bethany Road, Suite 7 Email: Jason.Tishler@dothill.com
Hazlet, NJ 07730 USA WWW: http://www.dothill.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1)
2001-03-08 7:31 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Jason Tishler
@ 2001-03-08 13:20 ` Robert Collins
2001-03-08 13:56 ` Jason Tishler
2001-03-09 1:10 ` Dr. Volker Zell
1 sibling, 1 reply; 12+ messages in thread
From: Robert Collins @ 2001-03-08 13:20 UTC (permalink / raw)
To: Jason Tishler, Dr. Volker Zell
Cc: Sagar R. Shah, Kevin Wright, Cygwin-Mailing-List
The patch needs to alter configure.in, not configure & config.h
Rob
----- Original Message -----
From: "Jason Tishler" <Jason.Tishler@dothill.com>
To: "Dr. Volker Zell" <Dr.Volker.Zell@oracle.com>
Cc: "Sagar R. Shah" <Sagar.Shah@sid.cam.ac.uk>; "Kevin Wright"
<kevin@wright.org>; "Cygwin-Mailing-List" <cygwin@cygwin.com>
Sent: Friday, March 09, 2001 2:30 AM
Subject: Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release:
GNU Ghostscript 5.50-1)
> Volker,
>
> On Wed, Mar 07, 2001 at 09:57:48AM +0100, Dr. Volker Zell wrote:
> Content-Description: Patch for w3m-0.1.10 -
http://ei5nazha.yz.yamagata-u.ac.jp/~aito/w3m/eng/ -
ftp://ftp.firedrake.org/w3m/
>
> Thanks for your patch.
>
> I was able to build w3m-0.1.10 after applying it with only one minor
> hiccup. I applied your patch and then ran configure. Due to this, I
> had to re-comment out #define INET6 in config.h. Should I have
applied
> your patch after running configure?
>
> Otherwise, w3m built cleanly.
>
> Have you submitted your patch so hopefully the next version of w3m
will
> build OOTB under Cygwin?
>
> Thanks,
> Jason
>
> --
> Jason Tishler
> Director, Software Engineering Phone: +1 (732) 264-8770 x235
> Dot Hill Systems Corp. Fax: +1 (732) 264-8798
> 82 Bethany Road, Suite 7 Email: Jason.Tishler@dothill.com
> Hazlet, NJ 07730 USA WWW: http://www.dothill.com
>
> --
> Want to unsubscribe from this list?
> Check out: http://cygwin.com/ml/#unsubscribe-simple
>
>
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1)
2001-03-08 13:20 ` Robert Collins
@ 2001-03-08 13:56 ` Jason Tishler
0 siblings, 0 replies; 12+ messages in thread
From: Jason Tishler @ 2001-03-08 13:56 UTC (permalink / raw)
To: Robert Collins
Cc: Dr. Volker Zell, Sagar R. Shah, Kevin Wright, Cygwin-Mailing-List
Rob,
On Fri, Mar 09, 2001 at 08:23:11AM +1100, Robert Collins wrote:
> The patch needs to alter configure.in, not configure & config.h
Unfortunately, w3m does *not* use autoconf. Sigh...
Jason
--
Jason Tishler
Director, Software Engineering Phone: +1 (732) 264-8770 x235
Dot Hill Systems Corp. Fax: +1 (732) 264-8798
82 Bethany Road, Suite 7 Email: Jason.Tishler@dothill.com
Hazlet, NJ 07730 USA WWW: http://www.dothill.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1)
2001-03-08 7:31 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Jason Tishler
2001-03-08 13:20 ` Robert Collins
@ 2001-03-09 1:10 ` Dr. Volker Zell
1 sibling, 0 replies; 12+ messages in thread
From: Dr. Volker Zell @ 2001-03-09 1:10 UTC (permalink / raw)
To: Jason Tishler; +Cc: Cygwin-Mailing-List
>>>>> "Jason" == Jason Tishler <Jason.Tishler@dothill.com> writes:
Jason> Volker,
Jason> On Wed, Mar 07, 2001 at 09:57:48AM +0100, Dr. Volker Zell wrote:
Jason> Content-Description: Patch for w3m-0.1.10 - http://ei5nazha.yz.yamagata-u.ac.jp/~aito/w3m/eng/ - ftp://ftp.firedrake.org/w3m/
Jason> Thanks for your patch.
Jason> I was able to build w3m-0.1.10 after applying it with only one minor
Jason> hiccup. I applied your patch and then ran configure. Due to this, I
Jason> had to re-comment out #define INET6 in config.h. Should I have applied
Jason> your patch after running configure?
Yes, I forget to mention it. configure seems to detect ipv6 support.
I also commented it out by hand.
Jason> Otherwise, w3m built cleanly.
Jason> Have you submitted your patch so hopefully the next version of w3m will
Jason> build OOTB under Cygwin?
Will do so.
Jason> Thanks,
Jason> Jason
Ciao
Volker
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1)
2002-01-22 12:16 lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Bradford, Denis
@ 2002-01-22 13:01 ` Jason Tishler
0 siblings, 0 replies; 12+ messages in thread
From: Jason Tishler @ 2002-01-22 13:01 UTC (permalink / raw)
To: Bradford, Denis; +Cc: 'cygwin@cygwin.com'
On Tue, Jan 22, 2002 at 02:11:22PM -0500, Bradford, Denis wrote:
> I've tried without success to build the latest w3m sources (w3m-0.2.4.tar)
> on Windows 2000 (through Cygwin). I see others having the same problem, so
> thought I'd try to find the compiled binaries:
>
> [snip]
>
> Any help appreciated,
See the following:
http://www.dd.iij4u.or.jp/~madokam/#w3m
Jason
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1)
@ 2002-01-22 12:16 Bradford, Denis
2002-01-22 13:01 ` Jason Tishler
0 siblings, 1 reply; 12+ messages in thread
From: Bradford, Denis @ 2002-01-22 12:16 UTC (permalink / raw)
To: 'cygwin@cygwin.com'; +Cc: 'kevin@wright.org'
I've tried without success to build the latest w3m sources (w3m-0.2.4.tar)
on Windows 2000 (through Cygwin). I see others having the same problem, so
thought I'd try to find the compiled binaries:
> On Mon, 5 Mar 2001, Kevin Wright wrote:
> > these files. (NOTE: I have ported lynx and w3m if anyone is
> > interested)
Yes, I'm interested! Failing that, does the following indicate that the
binaries are somewhere in www.cygwin.com? I could not find them:
On 7 Mar 2001, Dr. Volker Zell wrote:
> Jason> Have you submitted your patch so hopefully the next version of
w3m will build OOTB under Cygwin?
>Will do so.
Jason> Have you submitted your patch so hopefully the next version of
w3m will
Jason> build OOTB under Cygwin?
Any help appreciated,
___________________
Denis Bradford
CTG Technical Publications
Rational Software
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2002-01-22 20:16 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-03-05 21:28 [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1 Kevin Wright
2001-03-06 5:38 ` Cygwin w3m (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Jason Tishler
2001-03-06 14:14 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Sagar R. Shah
2001-03-07 0:53 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Dr. Volker Zell
2001-03-07 1:41 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Sagar R. Shah
2001-03-08 7:31 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Jason Tishler
2001-03-08 13:20 ` Robert Collins
2001-03-08 13:56 ` Jason Tishler
2001-03-09 1:10 ` Dr. Volker Zell
2001-03-07 2:01 ` lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNUGhostscript 5.50-1) Malcolm Boekhoff
2002-01-22 12:16 lynx & w3m ports (was Re: [ANNOUNCEMENT] Initial Release: GNU Ghostscript 5.50-1) Bradford, Denis
2002-01-22 13:01 ` Jason Tishler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).