new install of cygwin with pdksh doesn't work

new install of cygwin with pdksh doesn't work

[David M. Karr]

I have a relatively recent install of cygwin, along with pdksh-2.14.
I have scripts that reference "/bin/ksh" that work fine.

Today I've been setting up these tools on another PC, and now when I
execute "ksh", I get the following:

    ksh: /cygdrive/d/dmk/.bashrc[1]: syntax error: `in^M' unexpected

I'm sure this has something to do with line endings, but I don't
understand what has to be done.

In case it matters, here are my simple ".bashrc", ".bash_profile", and
".bashvars" files:

----------.bashrc: cut here------
case $- in
	 *i*)
		  if [ "$TERM" = "dumb" ] ; then
				alias ls="ls -aFC --color"
		  else
				alias ls="ls -aFC";
		  fi
		  PS1="[\H;] "

		  . $HOME/.bash_profile
		  ;;
esac
----------.bashrc: cut here------

----------.bash_profile: cut here------
umask 2

. $HOME/.bashvars
----------.bash_profile: cut here------

----------.bashvars: cut here------
export HISTSIZE=64
unset HISTFILE

export ENV=$HOME/.bashrc

export PAGER=less

export MPAGE="-4 -b Letter -H -X -c -f -z lp"

export PATH="$PATH:.://d/dmk/lisp/jde-2.1.8/lisp"

export PATH="$PATH:/usr/local/bin"

export TP_OPTS="-m DRAFT -i --n -C --f --F -S 2 -4"

function dospathinbash () {
	echo $(cygpath -w $1) | sed -e 's,\\,/,g'
}
export -f dospathinbash
----------.bashvars: cut here------
-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Christopher Faylor]

On Wed, Dec 20, 2000 at 02:39:08PM -0800, David M. Karr wrote:
>I have a relatively recent install of cygwin, along with pdksh-2.14.
>I have scripts that reference "/bin/ksh" that work fine.
>
>Today I've been setting up these tools on another PC, and now when I
>execute "ksh", I get the following:
>
>    ksh: /cygdrive/d/dmk/.bashrc[1]: syntax error: `in^M' unexpected
>
>I'm sure this has something to do with line endings, but I don't
>understand what has to be done.

Remove the ^Ms in .bashrc.

cgf

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

>>>>> "Christopher" == Christopher Faylor <cgf@redhat.com> writes:
  Christopher> On Wed, Dec 20, 2000 at 02:39:08PM -0800, David M. Karr wrote:
  >> I have a relatively recent install of cygwin, along with pdksh-2.14.
  >> I have scripts that reference "/bin/ksh" that work fine.
  >> 
  >> Today I've been setting up these tools on another PC, and now when I
  >> execute "ksh", I get the following:
  >> 
  >> ksh: /cygdrive/d/dmk/.bashrc[1]: syntax error: `in^M' unexpected
  >> 
  >> I'm sure this has something to do with line endings, but I don't
  >> understand what has to be done.

  Christopher> Remove the ^Ms in .bashrc.

I have none.  These are the exact same files I used on the other PC
that is working fine.  I copied them directly from the PC that doesn't
have the problem to the PC that does have the problem, without change.

-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Christopher Faylor]

On Wed, Dec 20, 2000 at 03:49:32PM -0800, David M. Karr wrote:
>>>>>> "Christopher" == Christopher Faylor <cgf@redhat.com> writes:
>  Christopher> On Wed, Dec 20, 2000 at 02:39:08PM -0800, David M. Karr wrote:
>  >> I have a relatively recent install of cygwin, along with pdksh-2.14.
>  >> I have scripts that reference "/bin/ksh" that work fine.
>  >> 
>  >> Today I've been setting up these tools on another PC, and now when I
>  >> execute "ksh", I get the following:
>  >> 
>  >> ksh: /cygdrive/d/dmk/.bashrc[1]: syntax error: `in^M' unexpected
>  >> 
>  >> I'm sure this has something to do with line endings, but I don't
>  >> understand what has to be done.
>
>  Christopher> Remove the ^Ms in .bashrc.
>
>I have none.  These are the exact same files I used on the other PC
>that is working fine.  I copied them directly from the PC that doesn't
>have the problem to the PC that does have the problem, without change.

What are you using to verify this?  od -c should show you if your
supposition that there are no ^Ms in your file is correct.

I would not be surprised to find out that you are wrong and that your
.bashrc file has lines that end with ^M^J(\r\n).

Editing the file with 'vi -b' should also show any ^Ms.

If you really don't have any ^Ms in your file then I am at a loss as
to why they would show up in your error output.

cgf

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

>>>>> "Christopher" == Christopher Faylor <cgf@redhat.com> writes:
  Christopher> On Wed, Dec 20, 2000 at 03:49:32PM -0800, David M. Karr wrote:
  >>>>>>> "Christopher" == Christopher Faylor <cgf@redhat.com> writes:
  Christopher> On Wed, Dec 20, 2000 at 02:39:08PM -0800, David M. Karr wrote:
  >> >> I have a relatively recent install of cygwin, along with pdksh-2.14.
  >> >> I have scripts that reference "/bin/ksh" that work fine.
  >> >> 
  >> >> Today I've been setting up these tools on another PC, and now when I
  >> >> execute "ksh", I get the following:
  >> >> 
  >> >> ksh: /cygdrive/d/dmk/.bashrc[1]: syntax error: `in^M' unexpected
  >> >> 
  >> >> I'm sure this has something to do with line endings, but I don't
  >> >> understand what has to be done.
  >> 
  Christopher> Remove the ^Ms in .bashrc.
  >> 
  >> I have none.  These are the exact same files I used on the other PC
  >> that is working fine.  I copied them directly from the PC that doesn't
  >> have the problem to the PC that does have the problem, without change.

  Christopher> What are you using to verify this?  od -c should show you if your
  Christopher> supposition that there are no ^Ms in your file is correct.

  Christopher> I would not be surprised to find out that you are wrong and that your
  Christopher> .bashrc file has lines that end with ^M^J(\r\n).

  Christopher> Editing the file with 'vi -b' should also show any ^Ms.

  Christopher> If you really don't have any ^Ms in your file then I am at a loss as
  Christopher> to why they would show up in your error output.

Ok, now I have a little more useful information.  The file does have
"\r\n" line endings.  Even my original file, from the PC installation
which works.  So the Cygwin installed on the first PC (from a couple
of months ago) can deal with ^Ms, but the new install cannot.  I tried
creating an ordinary file with Emacs, and it also produces ^Ms (using
"vi -b" to verify).  I can't use this arrangement if the files
produced by Emacs are invalid with Cygwin.  Again, I don't have this
problem on the original installation.

So does this have something to do with one of the initial choices you
get when you run "setup", which is "Default Text File Type", choices
"Dos" or "Unix"?  In order to get this to work, do I have to
completely reinstall, selecting "Dos"?  I believe that when I
installed Cygwin on the first PC, I didn't get those choices.

-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Larry Hall (RFK Partners, Inc)]

At 12:53 PM 1/3/2001, David M. Karr wrote:
> >>>>> "Earnie" == Earnie Boyd <earnie_boyd@yahoo.com> writes:
>   Earnie> --- "Larry Hall (RFK Partners, Inc)" <lhall@rfk.com> wrote:
>   >> 
>   >> >I guess this means that the default mode for unmapped directories is
>   >> >"text" on my original installation, and "binary" for the second
>   >> >installation.  Since directories like "d:/dmk" (my home directory) are
>   >> >not covered by the original mount table, I would get the default.
>   >> 
>   >> You should be able to reset your default mode for unmapped drives using
>   >> the --change-cygdrive-prefix setting for mount but specify the "-t" flag
>   >> too.  I haven't tried this myself so I don't know if it actually works.
>
>   Earnie> If you chose the "Everyone" radio button, add a -s to that.
>
>   >> >So, when I install it again, if I select the "DOS" text file type, I
>   >> >won't have to add this mount to get files on the "D:/" drive to use
>   >> >DOS text file mode, correct?
>   >> 
>   >> Right.
>   >> 
>   >> >What exactly in the "cygcheck" output (or any other place, for that
>   >> >matter) tells me what the default text file type is?
>   >> 
>   >> Nothing.  cygcheck doesn't output that yet.
>
>   Earnie> That's not true.  The output of the registry data can tell you.  0x00000020 is
>   Earnie> text mode 0x00000022 is binary mode.
>
>Sorry for needing to rehash this, but could someone tell me EXACTLY
>what I need to execute to permanently change the default text file
>type to DOS?  I've tried numerous variations of what's described here,
>and I can't get it to work on a third installation of this (where the
>user neglected to select "DOS" on the initial install).
>
>I've tried the following:
>
>mount -ts --change-cygdrive-prefix /cygdrive
>mount -ts --change-cygdrive-prefix /d
>mount -t --change-cygdrive-prefix /d
>
>These all just echo the usage message.


AFAICT, mount doesn't accept combined flag options, at least for 
--change-cygdrive-prefix.  Use -t -s.  Also its best to make sure that
you invoke the --change-cygdrive-prefix option without the -s flag, since
you may have set the option for your personal login to something other 
than text in your attempts.  Do the following:

mount -t -s --change-cygdrive-prefix /cygdrive
mount -t --change-cygdrive-prefix /cygdrive

That should do it.  BTW, I don't recommend using a path like "/d" for your
cygdrive path.  Since many people tend to mount their D: drive to /d, this
may become confusing for you.  Whatever suits you is fine, providing you 
understand what you're doing.


>After the following:
>
>       mount -t d: /d
>
>I get "mount: warning - /d does not exist".  Doing "mount" after this
>shows a new mount entry in textmode, but running "ksh" still gets the
>usual error.


As you said, you got the warning.  Mount really wants the POSIX path you 
mount to exist, but it doesn't force it to.  Type "mkdir /d" before the 
mount to remove this warning.


>-- 
>===================================================================
>David M. Karr     ; w:(425)487-8312     ; TCSI & Best Consulting
>dkarr@tcsi.com    ; Java/Unix/XML/C++/X ; BrainBench CJ12P (#12004)



Larry Hall                              lhall@rfk.com
RFK Partners, Inc.                      http://www.rfk.com
118 Washington Street                   (508) 893-9779 - RFK Office
Holliston, MA 01746                     (508) 893-9889 - FAX



--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

>>>>> "Earnie" == Earnie Boyd <earnie_boyd@yahoo.com> writes:
  Earnie> --- "Larry Hall (RFK Partners, Inc)" <lhall@rfk.com> wrote:
  >> 
  >> >I guess this means that the default mode for unmapped directories is
  >> >"text" on my original installation, and "binary" for the second
  >> >installation.  Since directories like "d:/dmk" (my home directory) are
  >> >not covered by the original mount table, I would get the default.
  >> 
  >> You should be able to reset your default mode for unmapped drives using
  >> the --change-cygdrive-prefix setting for mount but specify the "-t" flag
  >> too.  I haven't tried this myself so I don't know if it actually works.

  Earnie> If you chose the "Everyone" radio button, add a -s to that.

  >> >So, when I install it again, if I select the "DOS" text file type, I
  >> >won't have to add this mount to get files on the "D:/" drive to use
  >> >DOS text file mode, correct?
  >> 
  >> Right.
  >> 
  >> >What exactly in the "cygcheck" output (or any other place, for that
  >> >matter) tells me what the default text file type is?
  >> 
  >> Nothing.  cygcheck doesn't output that yet.

  Earnie> That's not true.  The output of the registry data can tell you.  0x00000020 is
  Earnie> text mode 0x00000022 is binary mode.

Sorry for needing to rehash this, but could someone tell me EXACTLY
what I need to execute to permanently change the default text file
type to DOS?  I've tried numerous variations of what's described here,
and I can't get it to work on a third installation of this (where the
user neglected to select "DOS" on the initial install).

I've tried the following:

mount -ts --change-cygdrive-prefix /cygdrive
mount -ts --change-cygdrive-prefix /d
mount -t --change-cygdrive-prefix /d

These all just echo the usage message.

After the following:

      mount -t d: /d

I get "mount: warning - /d does not exist".  Doing "mount" after this
shows a new mount entry in textmode, but running "ksh" still gets the
usual error.

-- 
===================================================================
David M. Karr     ; w:(425)487-8312     ; TCSI & Best Consulting
dkarr@tcsi.com    ; Java/Unix/XML/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Jari Aalto+mail.linux]

* Fri 2000-12-22 Markus Hoenicka <Markus.Hoenicka@uth.tmc.edu> list.cygwin
* Message-Id: < 14915.26523.510000.202002@gargle.gargle.HOWL >
| I don't use CVS here. Is there a specific reason why do you run it in
| DOS under NT Emacs?  Bash and ash run just fine as interactive and
| non-interactive shells in NT Emacs.

I run both: DOS and BASH shells and sometimes I forgot.

And pcl-cvs.el, runs Emacs call-process, which I think is native 98
kernel, and CVS yanks the ^M to the perfect unix-files that I store in
Linux end.

I hate it :-) I want always plain \n, no matter what platform 
I use CVS on.

I have to push the CVS developers more to really understand that 
"automatic" and non-user-controllable end-of-line conversions
are bad.

Maybe they hear if I request it long enough, or find the time
to offer them a patch...time to go clone myself to get more
job done.

Jari


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Markus Hoenicka]

I don't use CVS here. Is there a specific reason why do you run it in
DOS under NT Emacs?  Bash and ash run just fine as interactive and
non-interactive shells in NT Emacs.

Markus

Jari Aalto+mail.emacs writes:
 > But that Idiot CVS pulls the ^M back from he CVS server if you
 > run it in DOS. (under NT Emacs)
 > 
 > I would appreciate if bash could tolerate ^M in the end of lines.
 > 
 > Jari
 > 
 > 
 > --
 > Want to unsubscribe from this list?
 > Check out: http://cygwin.com/ml/#unsubscribe-simple
 > 

-- 
Markus Hoenicka, PhD
UT Houston Medical School
Dept. of Integrative Biology and Pharmacology
6431 Fannin MSB4.114
Houston, TX 77030
(713) 500-6313, -7477
(713) 500-7444 (fax)
Markus.Hoenicka@uth.tmc.edu
http://ourworld.compuserve.com/homepages/hoenicka_markus/


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Christopher Faylor]

On Fri, Dec 22, 2000 at 01:22:27AM +0100, Corinna Vinschen wrote:
>On Friday 22 December 2000 01:11, Jari Aalto+mail.emacs wrote:
>> I would appreciate if bash could tolerate ^M in the end of lines.
>
>It does.
>
>Corinna

LOL.  I responded almost exactly the same way before I read your email.

cgf

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Christopher Faylor]

On Fri, Dec 22, 2000 at 02:11:38AM +0200, Jari Aalto+mail.emacs wrote:
>* Thu 2000-12-21 Markus Hoenicka <Markus.Hoenicka@uth.tmc.edu> list.cygwin
>* Message-Id: < 14914.6314.575000.452009@gargle.gargle.HOWL >
>| David M. Karr writes:
>|
>|  > As I still have to work with other applications (Emacs, etc.) which
>|  > will continue to write files with DOS line endings, removing the ^Ms
>|  > is not a practical option, as I'd have to do that constantly.
>|
>| If Emacs is your major concern, stick the following into your .emacs:
>|
>| (setq-default buffer-file-coding-system 'undecided-unix)
>|
>| New files will then be unix-style. Works great here.
>
>But that Idiot CVS pulls the ^M back from he CVS server if you
>run it in DOS. (under NT Emacs)
>
>I would appreciate if bash could tolerate ^M in the end of lines.

It can.

cgf

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Corinna Vinschen]

On Friday 22 December 2000 01:11, Jari Aalto+mail.emacs wrote:
> I would appreciate if bash could tolerate ^M in the end of lines.

It does.

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Jari Aalto+mail.emacs]

* Thu 2000-12-21 Markus Hoenicka <Markus.Hoenicka@uth.tmc.edu> list.cygwin
* Message-Id: < 14914.6314.575000.452009@gargle.gargle.HOWL >
| David M. Karr writes:
|
|  > As I still have to work with other applications (Emacs, etc.) which
|  > will continue to write files with DOS line endings, removing the ^Ms
|  > is not a practical option, as I'd have to do that constantly.
|
| If Emacs is your major concern, stick the following into your .emacs:
|
| (setq-default buffer-file-coding-system 'undecided-unix)
|
| New files will then be unix-style. Works great here.

But that Idiot CVS pulls the ^M back from he CVS server if you
run it in DOS. (under NT Emacs)

I would appreciate if bash could tolerate ^M in the end of lines.

Jari


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Earnie Boyd]

--- "Larry Hall (RFK Partners, Inc)" <lhall@rfk.com> wrote:
> 
> >I guess this means that the default mode for unmapped directories is
> >"text" on my original installation, and "binary" for the second
> >installation.  Since directories like "d:/dmk" (my home directory) are
> >not covered by the original mount table, I would get the default.
> 
> 
> You should be able to reset your default mode for unmapped drives using
> the --change-cygdrive-prefix setting for mount but specify the "-t" flag
> too.  I haven't tried this myself so I don't know if it actually works.
> 

If you chose the "Everyone" radio button, add a -s to that.

> 
> >So, when I install it again, if I select the "DOS" text file type, I
> >won't have to add this mount to get files on the "D:/" drive to use
> >DOS text file mode, correct?
> 
> 
> Right.
> 
> 
> >What exactly in the "cygcheck" output (or any other place, for that
> >matter) tells me what the default text file type is?
> 
> 
> Nothing.  cygcheck doesn't output that yet.
> 

That's not true.  The output of the registry data can tell you.  0x00000020 is
text mode 0x00000022 is binary mode.

Cheers,

=====
Earnie Boyd
mailto:earnie_boyd@yahoo.com

---         < http://earniesystems.safeshopper.com >         ---
--- Cygwin: POSIX on Windows < http://gw32.freeyellow.com/ > ---
---   Minimalist GNU for Windows < http://www.mingw.org/ >   ---

__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Larry Hall (RFK Partners, Inc)]

At 03:15 PM 12/21/2000, David M. Karr wrote:
> >>>>> "Earnie" == Earnie Boyd <earnie_boyd@yahoo.com> writes:
>   Earnie> --- "David M. Karr" <dkarr@tcsi.com> wrote:
>   >> 
>   >> I don't understand the option of setting text mode mount points.  I
>   >> have no idea what the ramifications of that would be.
>
>   Earnie> Sigh.  How long have you been on this list?  I'll now suggest that you refer to
>   Earnie> the documentation, FAQ and mail archives for which you can find URL pointers at
>   Earnie> http://cygwin.com .
>
>Ok, after reading the user's guide, I did the following on the new
>system:
>
>    mount -t d: /d
>
>After this, the output of "mount" is the following:
>
>     Device              Directory           Type         Flags
>     d:\cygwin\bin       /usr/bin            system       binmode
>     d:\cygwin\lib       /usr/lib            system       binmode
>     d:\cygwin           /                   system       binmode
>     d:                  /d                  user         textmode
>
>I now find that my original .bash* files work fine, even with ^Ms.


Right.


>Is this the correct solution for this?  All of the files I create will
>be stored on the D: partition, but I guess any files that I read from
>directories which map to the three "binmode" mounts will be
>interpreted differently.  I don't know how much of an issue that is.


If you had selected "DOS" originally in setup, all these mounts would have
been set to text.  If that's what you wanted, set them that way now and 
you don't need your added entry.  Otherwise, mount all the other drives you
want to act "DOS" drives with the "text" setting.


>The mount table from the original installation just has the first
>three, with the only difference being the "Type" is "user" instead of
>"system".  From my reading of the UG, that shouldn't matter.


If you want your settings to affect only you, that's correct.


>I guess this means that the default mode for unmapped directories is
>"text" on my original installation, and "binary" for the second
>installation.  Since directories like "d:/dmk" (my home directory) are
>not covered by the original mount table, I would get the default.


You should be able to reset your default mode for unmapped drives using
the --change-cygdrive-prefix setting for mount but specify the "-t" flag
too.  I haven't tried this myself so I don't know if it actually works.


>So, when I install it again, if I select the "DOS" text file type, I
>won't have to add this mount to get files on the "D:/" drive to use
>DOS text file mode, correct?


Right.


>What exactly in the "cygcheck" output (or any other place, for that
>matter) tells me what the default text file type is?


Nothing.  cygcheck doesn't output that yet.

Larry Hall                              lhall@rfk.com
RFK Partners, Inc.                      http://www.rfk.com
118 Washington Street                   (508) 893-9779 - RFK Office
Holliston, MA 01746                     (508) 893-9889 - FAX



--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

>>>>> "Earnie" == Earnie Boyd <earnie_boyd@yahoo.com> writes:
  Earnie> --- "David M. Karr" <dkarr@tcsi.com> wrote:
  >> 
  >> I don't understand the option of setting text mode mount points.  I
  >> have no idea what the ramifications of that would be.

  Earnie> Sigh.  How long have you been on this list?  I'll now suggest that you refer to
  Earnie> the documentation, FAQ and mail archives for which you can find URL pointers at
  Earnie> http://cygwin.com .

Ok, after reading the user's guide, I did the following on the new
system:

   mount -t d: /d

After this, the output of "mount" is the following:

    Device              Directory           Type         Flags
    d:\cygwin\bin       /usr/bin            system       binmode
    d:\cygwin\lib       /usr/lib            system       binmode
    d:\cygwin           /                   system       binmode
    d:                  /d                  user         textmode

I now find that my original .bash* files work fine, even with ^Ms.

Is this the correct solution for this?  All of the files I create will
be stored on the D: partition, but I guess any files that I read from
directories which map to the three "binmode" mounts will be
interpreted differently.  I don't know how much of an issue that is.

The mount table from the original installation just has the first
three, with the only difference being the "Type" is "user" instead of
"system".  From my reading of the UG, that shouldn't matter.

I guess this means that the default mode for unmapped directories is
"text" on my original installation, and "binary" for the second
installation.  Since directories like "d:/dmk" (my home directory) are
not covered by the original mount table, I would get the default.

So, when I install it again, if I select the "DOS" text file type, I
won't have to add this mount to get files on the "D:/" drive to use
DOS text file mode, correct?

What exactly in the "cygcheck" output (or any other place, for that
matter) tells me what the default text file type is?

-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Larry Hall (RFK Partners, Inc)]

At 11:46 AM 12/21/2000, David M. Karr wrote:
> >>>>> "Markus" == Markus Hoenicka <Markus.Hoenicka@uth.tmc.edu> writes:
>   Markus> David M. Karr writes:
>   >> As I still have to work with other applications (Emacs, etc.) which
>   >> will continue to write files with DOS line endings, removing the ^Ms
>   >> is not a practical option, as I'd have to do that constantly.
>
>   Markus> If Emacs is your major concern, stick the following into your .emacs:
>
>   Markus> (setq-default buffer-file-coding-system 'undecided-unix)
>
>   Markus> New files will then be unix-style. Works great here.
>
>Emacs is a major concern, but not my only one.  I don't think it's
>practical to try to fix every Windows program to produce Unix line
>endings.  I have to focus on getting Cygwin to work with DOS line
>endings.
>
>My original installation works fine.  When I ran the second
>installation, I think I probably left the "Unix" flag on.  Is it
>conceivable that I'll have to uninstall completely so I can reinstall
>with the "DOS" flag set?  Rerunning it and setting that flag had no
>effect.


David, you should find the background to answer your question in the 
Cygwin User's Guide in the sections discussing mounts and the binary/text
issue.  Setting the "DOS" flag in the installation only indicates whether
mount uses the "-b" (binary) flag or not by default.  This applies to all
mounts setup makes as well as the /cgydrive notation.  There's no other
"magic" going on here.

Good luck,




Larry Hall                              lhall@rfk.com
RFK Partners, Inc.                      http://www.rfk.com
118 Washington Street                   (508) 893-9779 - RFK Office
Holliston, MA 01746                     (508) 893-9889 - FAX



--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

>>>>> "Markus" == Markus Hoenicka <Markus.Hoenicka@uth.tmc.edu> writes:
  Markus> David M. Karr writes:
  >> As I still have to work with other applications (Emacs, etc.) which
  >> will continue to write files with DOS line endings, removing the ^Ms
  >> is not a practical option, as I'd have to do that constantly.

  Markus> If Emacs is your major concern, stick the following into your .emacs:

  Markus> (setq-default buffer-file-coding-system 'undecided-unix)

  Markus> New files will then be unix-style. Works great here.

Emacs is a major concern, but not my only one.  I don't think it's
practical to try to fix every Windows program to produce Unix line
endings.  I have to focus on getting Cygwin to work with DOS line
endings.

My original installation works fine.  When I ran the second
installation, I think I probably left the "Unix" flag on.  Is it
conceivable that I'll have to uninstall completely so I can reinstall
with the "DOS" flag set?  Rerunning it and setting that flag had no
effect.

-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

>>>>> "Earnie" == Earnie Boyd <earnie_boyd@yahoo.com> writes:
  Earnie> --- "David M. Karr" <dkarr@tcsi.com> wrote:
  >> 
  >> I don't understand the option of setting text mode mount points.  I
  >> have no idea what the ramifications of that would be.

  Earnie> Sigh.  How long have you been on this list?  I'll now suggest that you refer to
  Earnie> the documentation, FAQ and mail archives for which you can find URL pointers at
  Earnie> http://cygwin.com .

Ok, fine.  I apologize.  I have unpacked and printed the user's guide.
I'll read it.  I've already looked through the FAQ and found nothing
very useful.  I'll look through the mail archives later.

In the meantime, can someone verify whether rerunning setup and
setting the "DOS" text file type should resolve my problem?  When I
tried that, it appeared to have no effect.

-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Markus Hoenicka]

David M. Karr writes:
 > As I still have to work with other applications (Emacs, etc.) which
 > will continue to write files with DOS line endings, removing the ^Ms
 > is not a practical option, as I'd have to do that constantly.

If Emacs is your major concern, stick the following into your .emacs:

(setq-default buffer-file-coding-system 'undecided-unix)

New files will then be unix-style. Works great here.

regards,
Markus

-- 
Markus Hoenicka, PhD
UT Houston Medical School
Dept. of Integrative Biology and Pharmacology
6431 Fannin MSB4.114
Houston, TX 77030
(713) 500-6313, -7477
(713) 500-7444 (fax)
Markus.Hoenicka@uth.tmc.edu
http://ourworld.compuserve.com/homepages/hoenicka_markus/


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Earnie Boyd]

--- "David M. Karr" <dkarr@tcsi.com> wrote:
> 
> I don't understand the option of setting text mode mount points.  I
> have no idea what the ramifications of that would be.
> 

Sigh.  How long have you been on this list?  I'll now suggest that you refer to
the documentation, FAQ and mail archives for which you can find URL pointers at
http://cygwin.com .

Cheers,

=====
Earnie Boyd
mailto:earnie_boyd@yahoo.com

---         < http://earniesystems.safeshopper.com >         ---
--- Cygwin: POSIX on Windows < http://gw32.freeyellow.com/ > ---
---   Minimalist GNU for Windows < http://www.mingw.org/ >   ---

__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

>>>>> "Earnie" == Earnie Boyd <earnie_boyd@yahoo.com> writes:
  >> a solution, as Christopher suggested, is to remove the ^M from the files.
  >> the easiest way I know of to do this is to pipe the script through "tr -d
  >> '\r'"
  >> so for example:
  >> 
  >> tr -d '\r' < /cygdrive/c/myscript > /tmp/myscript
  >> mv -f /tmp/myscript /cygdrive/c/myscript
  >> 
  >> the other would be to mount the location of the script in an explictly
  >> controlled mount point (text mode), or to change the default mount
  >> mode.

  Earnie> And the other would be to rerun setup and choose the DOS radio button.  Just
  Earnie> rerun setup, no need to redownload anything.

As I still have to work with other applications (Emacs, etc.) which
will continue to write files with DOS line endings, removing the ^Ms
is not a practical option, as I'd have to do that constantly.

I understand the option of rerunning setup and setting the DOS radio
button, but I actually already tried that.  After going through a few
dialogs, it said "Nothing to update" (or something like that), and it
seemed like it had no effect.  However, based on my limited
understanding of this, I think this would probably be the best option
(if I can get it to work).

I don't understand the option of setting text mode mount points.  I
have no idea what the ramifications of that would be.

-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Earnie Boyd]

--- Chris Abbey <cabbey@bresnanlink.net> wrote:
> As Earnie suggested, comparing the outputs, with attention to the mount
> point information will show that /cygdrive/? is mounted differently between
> the two machines, popcorn (I'll guess is the working one) mount with the
> flags as 0x0020 while nachos (I'll guess doesn't work) mounts with 0x0022.
> I'll venture a guess that you're accessing the scripts from /cygdrive/?/...
> right? (because the other mounts are the same for both.
> 

Yep, that be it.  The HOME directory is /cygdrive/d/dmk on both.

> a solution, as Christopher suggested, is to remove the ^M from the files.
> the easiest way I know of to do this is to pipe the script through "tr -d
> '\r'"
> so for example:
> 
> tr -d '\r' < /cygdrive/c/myscript > /tmp/myscript
> mv -f /tmp/myscript /cygdrive/c/myscript
> 
> the other would be to mount the location of the script in an explictly
> controlled mount point (text mode), or to change the default mount
> mode.
> 

And the other would be to rerun setup and choose the DOS radio button.  Just
rerun setup, no need to redownload anything.

Cheers,

=====
Earnie Boyd
mailto:earnie_boyd@yahoo.com

---         < http://earniesystems.safeshopper.com >         ---
--- Cygwin: POSIX on Windows < http://gw32.freeyellow.com/ > ---
---   Minimalist GNU for Windows < http://www.mingw.org/ >   ---

__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Chris Abbey]

As Earnie suggested, comparing the outputs, with attention to the mount
point information will show that /cygdrive/? is mounted differently between
the two machines, popcorn (I'll guess is the working one) mount with the
flags as 0x0020 while nachos (I'll guess doesn't work) mounts with 0x0022.
I'll venture a guess that you're accessing the scripts from /cygdrive/?/...
right? (because the other mounts are the same for both.

a solution, as Christopher suggested, is to remove the ^M from the files.
the easiest way I know of to do this is to pipe the script through "tr -d '\r'"
so for example:

tr -d '\r' < /cygdrive/c/myscript > /tmp/myscript
mv -f /tmp/myscript /cygdrive/c/myscript

the other would be to mount the location of the script in an explictly
controlled mount point (text mode), or to change the default mount
mode.



now the forces of openness
     have a powerful and
     unexpected new ally
    http://ibm.com/linux/


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

[-- Attachment #1: Type: text/plain, Size: 177 bytes --]

cygcheck output from \"good\" installation
cygcheck output from \"bad\" installation
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple


[-- Attachment #2: nachos.cygcheck.out --]
[-- Type: text/x-Algol68, Size: 7865 bytes --]


Cygnus Win95/NT Configuration Diagnostics
Current System Time: Wed Dec 20 17:26:23 2000

WinNT Ver 4.0 build 1381 Service Pack 6

Path:	/cygdrive/d/jdk1.3/bin
	/usr/bin
	/cygdrive/c/WINNT4/SYSTEM32
	/cygdrive/c/WINNT4
	/cygdrive/c/atria/bin
	/cygdrive/d/emacs-20.7/bin
	/cygdrive/d/gnuserv
	/cygdrive/c/WINDOWS
	/cygdrive/c/WINDOWS/COMMAND
	/cygdrive/c/shiva
	/cygdrive/c/PROGRA~1/SSHCOM~1/SSHSEC~1
	.
	//d/dmk/lisp/jde-2.1.8/lisp
	/usr/local/bin

SysDir: C:\WINNT4\System32
WinDir: C:\WINNT4

PWD = `/cygdrive/d/dmk/java/propmaster/demo/guitest'
USER = `dkarr'
MAKE_MODE = `unix'
HOME = `/cygdrive/d/dmk'

NUMBER_OF_PROCESSORS = `1'
PROMPT = `$p$g'
LOGONSERVER = `\\ALYSSA'
OS2LIBPATH = `C:\WINNT4\system32\os2\dll;'
TMPDIR = `/cygdrive/c/TEMP'
COMSPEC = `C:\WINNT4\system32\cmd.exe'
PAGER = `less'
SYSTEMDRIVE = `C:'
HOSTNAME = `NACHOS'
PROCESSOR_REVISION = `0502'
EMACSLOCKDIR = `D:/emacs-20.7/lock'
PATHEXT = `.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH'
COMPUTERNAME = `NACHOS'
JAVAHELP_HOME = `d:/jh1.1'
WINDIR = `C:\WINNT4'
USERPROFILE = `C:\WINNT4\Profiles\dkarr'
PROPMASTER_HOME = `d:/dmk/java/propmaster'
EMACSPATH = `D:/emacs-20.7/bin'
WINBOOTDIR = `C:\WINDOWS'
ENV = `/cygdrive/d/dmk/.bashrc'
EMACSDOC = `D:/emacs-20.7/etc'
MACHTYPE = `i686-pc-cygwin'
PROCESSOR_IDENTIFIER = `x86 Family 6 Model 5 Stepping 2, GenuineIntel'
EMACS = `t'
SBOOTP = `c:\shiva'
OS = `Windows_NT'
OLDPWD = `/cygdrive/d/dmk'
PROCESSOR_ARCHITECTURE = `x86'
TEMP = `/cygdrive/c/TEMP'
SHIVA = `c:\shiva'
TERMCAP = `emacs:co#80:tc=unknown:'
PROCESSOR_LEVEL = `6'
SYSTEMROOT = `C:\WINNT4'
TMP = `/cygdrive/c/TEMP'
HOMEDRIVE = `C:'
EMACS_DIR = `D:/emacs-20.7'
EMACSDATA = `D:/emacs-20.7/etc'
SHLVL = `1'
TP_OPTS = `-m DRAFT -i --n -C --f --F -S 2 -4'
HOMEPATH = `\'
USERDOMAIN = `BOTHELL'
MPAGE = `-4 -b Letter -H -X -c -f -z lp'
SHELL = `bash'
USERNAME = `dkarr'
EM_PARENT_PROCESS_ID = `340'
HOSTTYPE = `i686'
EMACSLOADPATH = `D:/emacs-20.7/site-lisp;D:/emacs-20.7/lisp;D:/emacs-20.7/leim'
OSTYPE = `cygwin'
HISTSIZE = `64'
TERM = `emacs'
JDKHOME = `d:/jdk1.3'
LOG4J_HOME = `d:/log4j-v0.9.1'
PATHSEP = `;'
_ = `/usr/bin/cygcheck'
TZ = `PST8PDT7,M4.1.0/2,M10.5.0/2'

HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
  (default) = `/cygdrive'
  cygdrive flags = 0x00000022
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/
  (default) = `d:/cygwin'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/bin
  (default) = `d:/cygwin/bin'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/lib
  (default) = `d:/cygwin/lib'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Program Options

a:  fd           N/A    N/A                    
c:  hd  FAT     2047Mb  83% CP    UN           
d:  hd  NTFS    6008Mb  40% CP CS UN PA FC     
e:  cd           N/A    N/A                    
f:  cd           N/A    N/A                    
g:  net NTFS    4282Mb  20% CP CS UN PA FC     Dev
m:  net MVFS    1000Mb  50% CP CS              CCase

d:\cygwin\bin  /usr/bin  system  binmode
d:\cygwin\lib  /usr/lib  system  binmode
d:\cygwin  /        system  binmode

Found: d:\cygwin\bin\bash.exe
Found: d:\cygwin\bin\cat.exe
Found: d:\cygwin\bin\cpp.exe
Found: d:\cygwin\bin\find.exe
Found: c:\WINDOWS\COMMAND\find.exe
Warning: d:\cygwin\bin\find.exe hides c:\WINDOWS\COMMAND\find.exe
Found: d:\cygwin\bin\gcc.exe
Found: d:\cygwin\bin\gdb.exe
Found: d:\cygwin\bin\ld.exe
Found: d:\cygwin\bin\ls.exe
Found: d:\cygwin\bin\make.exe
Found: d:\cygwin\bin\sh.exe

   56k 2000/12/03 d:\cygwin\bin\cygbz21.0.dll - os=4.0 img=1.0 sys=4.0
                  "cygbz21.0.dll" v0.0 ts=2000/11/20 15:53
   45k 2000/12/07 d:\cygwin\bin\cygform5.dll - os=4.0 img=1.0 sys=4.0
                  "cygform5.dll" v0.0 ts=2000/12/6 22:41
   18k 2000/10/23 d:\cygwin\bin\cyggdbm.dll - os=4.0 img=1.0 sys=4.0
                  "cyggdbm.dll" v0.0 ts=2000/10/22 19:26
   17k 2000/11/30 d:\cygwin\bin\cyghistory4.dll - os=4.0 img=1.0 sys=4.0
                  "cyghistory4.dll" v0.0 ts=2000/11/29 18:28
   14k 2000/10/23 d:\cygwin\bin\cygintl.dll - os=4.0 img=1.0 sys=4.0
                  "cygintl.dll" v0.0 ts=2000/10/23 12:02
   81k 2000/12/05 d:\cygwin\bin\cygitcl30.dll - os=4.0 img=1.0 sys=4.0
                  "cygitcl30.dll" v0.0 ts=2000/11/25 17:43
   35k 2000/12/05 d:\cygwin\bin\cygitk30.dll - os=4.0 img=1.0 sys=4.0
                  "cygitk30.dll" v0.0 ts=2000/11/25 17:43
   45k 2000/10/22 d:\cygwin\bin\cygjbig1.dll - os=4.0 img=1.0 sys=4.0
                  "cygjbig1.dll" v0.0 ts=2000/10/22 16:06
  119k 2000/10/23 d:\cygwin\bin\cygjpeg6b.dll - os=4.0 img=1.0 sys=4.0
                  "cygjpeg6b.dll" v0.0 ts=2000/10/22 17:58
   26k 2000/12/07 d:\cygwin\bin\cygmenu5.dll - os=4.0 img=1.0 sys=4.0
                  "cygmenu5.dll" v0.0 ts=2000/12/6 22:40
  159k 2000/12/07 d:\cygwin\bin\cygncurses++5.dll - os=4.0 img=1.0 sys=4.0
                  "cygncurses++5.dll" v0.0 ts=2000/12/6 22:42
  225k 2000/12/07 d:\cygwin\bin\cygncurses5.dll - os=4.0 img=1.0 sys=4.0
                  "cygncurses5.dll" v0.0 ts=2000/12/6 22:39
   15k 2000/12/07 d:\cygwin\bin\cygpanel5.dll - os=4.0 img=1.0 sys=4.0
                  "cygpanel5.dll" v0.0 ts=2000/12/6 22:40
  162k 2000/10/23 d:\cygwin\bin\cygpng2.dll - os=4.0 img=1.0 sys=4.0
                  "cygpng2.dll" v0.0 ts=2000/10/22 17:40
  108k 2000/11/30 d:\cygwin\bin\cygreadline4.dll - os=4.0 img=1.0 sys=4.0
                  "cygreadline4.dll" v0.0 ts=2000/11/29 18:28
  390k 2000/12/05 d:\cygwin\bin\cygtcl80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtcl80.dll" v0.0 ts=2000/11/25 17:39
    5k 2000/12/05 d:\cygwin\bin\cygtclpip80.dll - os=4.0 img=1.0 sys=4.0
   10k 2000/12/05 d:\cygwin\bin\cygtclreg80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtclreg80.dll" v0.0 ts=2000/11/25 17:39
  243k 2000/10/23 d:\cygwin\bin\cygtiff3.dll - os=4.0 img=1.0 sys=4.0
                  "cygtiff3.dll" v0.0 ts=2000/10/22 18:14
  623k 2000/12/05 d:\cygwin\bin\cygtk80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtk80.dll" v0.0 ts=2000/11/25 17:43
   41k 2000/11/20 d:\cygwin\bin\cygXpm-noX4.dll - os=4.0 img=1.0 sys=4.0
                  "cygXpm-noX4.dll" v0.0 ts=2000/11/19 18:41
   45k 2000/11/20 d:\cygwin\bin\cygXpm-X4.dll - os=4.0 img=1.0 sys=4.0
                  "cygXpm-X4.dll" v0.0 ts=2000/11/19 18:45
   49k 2000/10/23 d:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0
                  "cygz.dll" v0.0 ts=2000/10/22 17:22
  609k 2000/11/22 d:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
                  "cygwin1.dll" v0.0 ts=2000/11/21 18:00
    Cygwin DLL version info:
        dll major: 1001
        dll minor: 6
        dll epoch: 19
        dll bad signal mask: 19005
        dll old termios: 5
        dll malloc env: 28
        api major: 0
        api minor: 30
        shared data: 3
        dll identifier: cygwin1
        mount registry: 2
        cygnus registry name: Cygnus Solutions
        cygwin registry name: Cygwin
        program options name: Program Options
        cygwin mount registry name: mounts v2
        cygdrive flags: cygdrive flags
        cygdrive prefix: cygdrive prefix
        cygdrive default prefix: 
        build date: Tue Nov 21 21:00:16 EST 2000
        shared id: cygwin1S3

Use -h to see help about each section



-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


[-- Attachment #3: popcorn.cygcheck.out --]
[-- Type: text/x-Algol68, Size: 10289 bytes --]


Cygnus Win95/NT Configuration Diagnostics
Current System Time: Wed Dec 20 17:18:57 2000

WinNT Ver 4.0 build 1381 Service Pack 6

Path:	/cygdrive/d/IONA/BIN
	/cygdrive/d/JDK1.3/BIN
	/cygdrive/d/DMK/BIN
	/usr/bin
	/cygdrive/c/WINNT/SYSTEM32
	/cygdrive/c/WINNT
	/cygdrive/c/atria/bin
	/cygdrive/d/winvi
	/cygdrive/d/emacs-20.7/bin
	/cygdrive/d/gnuserv
	/cygdrive/d/mpage
	/cygdrive/d/miscbins
	.
	/cygdrive/d/dmk/lisp/jde-2.1.8/lisp
	/usr/local/bin

SysDir: C:\WINNT\System32
WinDir: C:\WINNT

HOME = `/cygdrive/d/dmk'
MAKE_MODE = `unix'
PWD = `/cygdrive/d/dmk/java'
USER = `dkarr'

ACME_HOME = `d:/dmk/java'
CLASSPATH = `d:\jdk1.3\lib\tools.jar;d:\xerces-1_1_3\xerces.jar;.;d:\jakarta-tomcat\lib\jasper.jar;d:\jakarta-tomcat\lib\xml.jar;d:\jakarta-tomcat\lib\servlet.jar;d:\jakarta-tomcat\lib\webserver.jar;d:\jakarta-tomcat\classes'
COMPUTERNAME = `POPCORN'
COMSPEC = `C:\WINNT\system32\cmd.exe'
EMACS = `t'
EMACSDATA = `D:/emacs-20.7/etc'
EMACSDOC = `D:/emacs-20.7/etc'
EMACSLOADPATH = `D:/emacs-20.7/site-lisp;D:/emacs-20.7/lisp;D:/emacs-20.7/leim'
EMACSLOCKDIR = `D:/emacs-20.7/lock'
EMACSPATH = `D:/emacs-20.7/bin'
EMACS_DIR = `D:/emacs-20.7'
EM_PARENT_PROCESS_ID = `597'
ENV = `/cygdrive/d/dmk/.bashrc'
GETOPT_HOME = `d:/dmk/java/propmaster/java-getopt'
HISTSIZE = `64'
HOMEDRIVE = `C:'
HOMEPATH = `\'
HOSTNAME = `POPCORN'
HOSTTYPE = `i586'
IT_CONFIG_PATH = `d:/Iona/config'
IT_ERRORS = `d:\iona\config\ErrorMsgs'
JAVAHELP_HOME = `d:/jh1.1'
JAVA_HOME = `d:/jdk1.3'
JDKHOME = `d:/jdk1.3'
JHHOME = `d:/jh1.1'
LOG4J_HOME = `d:/log4j-v0.8.5b'
LOGONSERVER = `\\ALYSSA'
MACHTYPE = `i586-pc-cygwin'
MPAGE = `-4 -b Letter -H -X -c -f -z lp'
NUMBER_OF_PROCESSORS = `1'
OLDPWD = `/cygdrive/d/dmk/java/linebreak'
ORBIXWEB_HOME = `d:\Iona'
OS2LIBPATH = `C:\WINNT\system32\os2\dll;'
OS = `Windows_NT'
OSTYPE = `cygwin'
PAGER = `less'
PATHEXT = `.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH'
PATHSEP = `;'
PRIMARY_CLEARCASE_GROUP = `gtenmo'
PRINTER = `"\\ALYSSA\steel"'
PROCESSOR_ARCHITECTURE = `x86'
PROCESSOR_IDENTIFIER = `x86 Family 6 Model 5 Stepping 2, GenuineIntel'
PROCESSOR_LEVEL = `6'
PROCESSOR_REVISION = `0502'
PROPMASTER_HOME = `d:/dmk/java/propmaster'
SHELL = `bash'
SHLVL = `1'
SYSTEMDRIVE = `C:'
SYSTEMROOT = `C:\WINNT'
TEMP = `/cygdrive/c/TEMP'
TERM = `emacs'
TERMCAP = `emacs:co#81:tc=unknown:'
TMP = `/cygdrive/c/TEMP'
TMPDIR = `/cygdrive/c/TEMP'
TOMCAT_HOME = `d:\jakarta-tomcat'
TP_OPTS = `-m DRAFT -i --n -C --f --F -S 2 -4'
USERDOMAIN = `BOTHELL'
USERNAME = `dkarr'
USERPROFILE = `C:\WINNT\Profiles\dkarr'
WINDIR = `C:\WINNT'
XALAN_HOME = `d:/xalanj-1.2'
XERCES_HOME = `d:/xerces-1_1_3'
_ = `/usr/bin/cygcheck'
dospathinbash = `() {  echo $(cygpath -w $1) | sed -e 's,\\,/,g'
}'
TZ = `PST8PDT7,M4.1.0/2,M10.5.0/2'

HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
  (default) = `/cygdrive'
  cygdrive flags = 0x00000020
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/
  (default) = `d:\cygwin'
  flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/bin
  (default) = `d:/cygwin/bin'
  flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/lib
  (default) = `d:/cygwin/lib'
  flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\00
  (default) = `C:'
  unix = `/'
  fbinary = 0x00000000
  fsilent = 0x00000000
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Installed Components
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Installed Components\d:/cygwin
  (default) = `20000517'
  bash = `0002.0004.0001'
  binutils = `19990818.0002'
  bison = `0000'
  byacc = `0000'
  bzip = `0000'
  clear = `0001.0000'
  cygwin = `0001.0001.0002'
  dejagnu = `0000'
  diff = `0000'
  expect = `0000'
  fileutils = `0000'
  findutils = `0000'
  flex = `0000'
  gawk = `0003.0000.0004'
  gcc = `0002.0095.0002.0002'
  gdb = `20000610'
  gperf = `0000'
  grep = `0000'
  groff = `0001.011a.0001'
  gzip = `0000'
  inetutils = `0001.0003.0002.0004'
  less = `0000'
  libpng = `0001.0000.0006.0001'
  login = `0001.0003'
  m = `0000'
  make = `0003.0079.0002'
  man = `0001.005g.0002'
  opengl = `0001.0002.0001.0001'
  patch = `0000'
  sed = `0003.0002.0001'
  shellutils = `0000'
  tar = `0000'
  tcltk = `20000610'
  termcap = `20000618.0001'
  texinfo = `0000'
  textutils = `0000'
  time = `0000'
  zlib = `0001.0001.0003.0001'
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin B20
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin B20\B20.1
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\00
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\01
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\02
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\03
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\04
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\05
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\06
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\07
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\08
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\09
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0A
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0B
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0C
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0D
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0E
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0F
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\10
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\11
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\12
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\13
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\14
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\15
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\16
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\17
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\18
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\19
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1A
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1B
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1C
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1D
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\GNUPro
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\GNUPro\i586-cygwin32
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\GNUPro\i586-cygwin32\i586-cygwin32
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\GNUPro\i586-cygwin32\i586-cygwin32\cygwin-B20.1
  (default) = `d:\cygnus-b20\cygwin-b20'
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Cygnus Cygwin B20
  (default) = `C:\WINNT\IsUninst.exe -fd:\cygnus-b20\cygwin-b20\Uninst.isu'
  DisplayName = `Cygwin B20'

a:  fd           N/A    N/A                    
c:  hd  FAT     1498Mb  83% CP    UN           
d:  hd  NTFS    6557Mb  44% CP CS UN PA FC     
e:  cd           N/A    N/A                    
f:  net NTFS    4282Mb  20% CP CS UN PA FC     Dev
m:  net MVFS    1000Mb  50% CP CS              CCase
z:  net MVFS    1000Mb  50% CP CS              CCase

d:\cygwin\bin  /usr/bin  user    binmode
d:\cygwin\lib  /usr/lib  user    binmode
d:\cygwin  /        user    binmode

Found: d:\cygwin\bin\bash.exe
Found: d:\cygwin\bin\cat.exe
Found: d:\cygwin\bin\cpp.exe
Found: d:\cygwin\bin\find.exe
Found: d:\cygwin\bin\gcc.exe
Found: d:\cygwin\bin\gdb.exe
Found: d:\cygwin\bin\ld.exe
Found: d:\cygwin\bin\ls.exe
Found: d:\cygwin\bin\make.exe
Found: d:\cygwin\bin\sh.exe

   83k 2000/06/11 d:\cygwin\bin\cygitcl30.dll - os=4.0 img=1.0 sys=4.0
                  "cygitcl30.dll" v0.0 ts=2000/6/10 20:34
   35k 2000/06/11 d:\cygwin\bin\cygitk30.dll - os=4.0 img=1.0 sys=4.0
                  "cygitk30.dll" v0.0 ts=2000/6/10 20:34
  402k 2000/06/11 d:\cygwin\bin\cygtcl80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtcl80.dll" v0.0 ts=2000/6/10 20:30
    5k 2000/06/11 d:\cygwin\bin\cygtclpip80.dll - os=4.0 img=1.0 sys=4.0
   10k 2000/06/11 d:\cygwin\bin\cygtclreg80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtclreg80.dll" v0.0 ts=2000/6/10 20:30
  639k 2000/06/11 d:\cygwin\bin\cygtk80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtk80.dll" v0.0 ts=2000/6/10 20:34
  586k 2000/08/04 d:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
                  "cygwin1.dll" v0.0 ts=2000/8/3 17:53
    Cygwin DLL version info:
        dll major: 1001
        dll minor: 4
        dll epoch: 19
        dll bad signal mask: 19005
        dll old termios: 5
        api major: 0
        api minor: 26
        shared data: 3
        dll identifier: cygwin1
        mount registry: 2
        cygnus registry name: Cygnus Solutions
        cygwin registry name: Cygwin
        program options name: Program Options
        cygwin mount registry name: mounts v2
        build date: Thu Aug 3 20:53:46 EDT 2000
        CVS tag: cygwin-1-1-4
        shared id: cygwin1S3

Use -h to see help about each section

Re: new install of cygwin with pdksh doesn't work

[Earnie Boyd]

--- "David M. Karr" <dkarr@tcsi.com> wrote:
> >>>>> "Earnie" == Earnie Boyd <earnie_boyd@yahoo.com> writes:
>   Earnie> --- "David M. Karr" <dkarr@tcsi.com> wrote:
>   >> 
>   >> I'm sure this has something to do with line endings, but I don't
>   >> understand what has to be done.
> 
>   Earnie> Then use setup to install Cygwin on the other machine.  It does all
> that needs
>   Earnie> to be done for those who don't know what to do.
> 
> I did.  I installed Cygwin with "setup", then installed "pdksh".  The
> given error is what I get when I try to execute "ksh".  I don't get
> that when I try to use "bash".  

Cygwin bash has been modified to handle this crap.

> However, on my own PC, where I
> installed Cygwin & pdksh a couple of months ago, I don't see this
> problem at all.
> 

Compare the differences of the output of `cygcheck -s -r -v' from both systems.
 I'm guessing you have mixed text vs binary mounts somewhere.

Cheers,

=====
Earnie Boyd
mailto:earnie_boyd@yahoo.com

---         < http://earniesystems.safeshopper.com >         ---
--- Cygwin: POSIX on Windows < http://gw32.freeyellow.com/ > ---
---   Minimalist GNU for Windows < http://www.mingw.org/ >   ---

__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[David M. Karr]

>>>>> "Earnie" == Earnie Boyd <earnie_boyd@yahoo.com> writes:
  Earnie> --- "David M. Karr" <dkarr@tcsi.com> wrote:
  >> 
  >> I'm sure this has something to do with line endings, but I don't
  >> understand what has to be done.

  Earnie> Then use setup to install Cygwin on the other machine.  It does all that needs
  Earnie> to be done for those who don't know what to do.

I did.  I installed Cygwin with "setup", then installed "pdksh".  The
given error is what I get when I try to execute "ksh".  I don't get
that when I try to use "bash".  However, on my own PC, where I
installed Cygwin & pdksh a couple of months ago, I don't see this
problem at all.

-- 
===============================================================================
David M. Karr     ; dkarr@tcsi.com  ; w:(425)487-8312 ; TCSI & Best Consulting
Software Engineer ; Unix/Java/C++/X ; BrainBench CJ12P (#12004)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: new install of cygwin with pdksh doesn't work

[Earnie Boyd]

--- "David M. Karr" <dkarr@tcsi.com> wrote:
> 
> I'm sure this has something to do with line endings, but I don't
> understand what has to be done.
> 

Then use setup to install Cygwin on the other machine.  It does all that needs
to be done for those who don't know what to do.

Cheers,

=====
Earnie Boyd
mailto:earnie_boyd@yahoo.com

---         < http://earniesystems.safeshopper.com >         ---
--- Cygwin: POSIX on Windows < http://gw32.freeyellow.com/ > ---
---   Minimalist GNU for Windows < http://www.mingw.org/ >   ---

__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple