public inbox for dwz@sourceware.org
 help / color / mirror / Atom feed
From: Mark Wielaard <mark@klomp.org>
To: dwz@sourceware.org
Subject: Re: [PATCH] Don't handle blocks as exprlocs for DWARF version 4 or higher.
Date: Thu, 18 Feb 2021 14:40:36 +0100	[thread overview]
Message-ID: <3fd1ebde0c9e1b8cbe09ea858a3e0f0a84af44b4.camel@klomp.org> (raw)
In-Reply-To: <20210213224622.16521-1-mark@klomp.org>

On Sat, 2021-02-13 at 23:46 +0100, Mark Wielaard wrote:
> Since DWARF version 4 blocks just contain bytes, trying to interpret
> them as exprlocs will most likely fail.
> 
>      * dwz.c (add_locexpr_dummy_dies): Only handle block as exprloc
>      for cu_version < 4.
>      (checksum_die): Likewise.
>      (write_die): Likewise.
> 
> https://sourceware.org/bugzilla/show_bug.cgi?id=26987

Ping. Any comments?

>  dwz.c | 166 +++++++++++++++++++++++++++++---------------------------
> --
>  1 file changed, 84 insertions(+), 82 deletions(-)
> 
> diff --git a/dwz.c b/dwz.c
> index d6b9df0..02fcd8c 100644
> --- a/dwz.c
> +++ b/dwz.c
> @@ -2913,43 +2913,44 @@ add_locexpr_dummy_dies (DSO *dso, dw_cu_ref
> cu, dw_die_ref die,
>    if (form == DW_FORM_block1)
>      {
>        /* Old DWARF uses blocks instead of exprlocs.  */
> -      switch (attr)
> -	{
> -	case DW_AT_frame_base:
> -	case DW_AT_location:
> -	case DW_AT_data_member_location:
> -	case DW_AT_vtable_elem_location:
> -	case DW_AT_byte_size:
> -	case DW_AT_bit_offset:
> -	case DW_AT_bit_size:
> -	case DW_AT_string_length:
> -	case DW_AT_lower_bound:
> -	case DW_AT_return_addr:
> -	case DW_AT_bit_stride:
> -	case DW_AT_upper_bound:
> -	case DW_AT_count:
> -	case DW_AT_segment:
> -	case DW_AT_static_link:
> -	case DW_AT_use_location:
> -	case DW_AT_allocated:
> -	case DW_AT_associated:
> -	case DW_AT_data_location:
> -	case DW_AT_byte_stride:
> -	case DW_AT_rank:
> -	case DW_AT_call_value:
> -	case DW_AT_call_target:
> -	case DW_AT_call_target_clobbered:
> -	case DW_AT_call_data_location:
> -	case DW_AT_call_data_value:
> -	case DW_AT_GNU_call_site_value:
> -	case DW_AT_GNU_call_site_data_value:
> -	case DW_AT_GNU_call_site_target:
> -	case DW_AT_GNU_call_site_target_clobbered:
> -	  if (read_exprloc_low_mem_phase1 (dso, die, ptr, len))
> -	    return 1;
> -	default:
> -	  break;
> -	}
> +      if (cu->cu_version < 4)
> +	switch (attr)
> +	  {
> +	  case DW_AT_frame_base:
> +	  case DW_AT_location:
> +	  case DW_AT_data_member_location:
> +	  case DW_AT_vtable_elem_location:
> +	  case DW_AT_byte_size:
> +	  case DW_AT_bit_offset:
> +	  case DW_AT_bit_size:
> +	  case DW_AT_string_length:
> +	  case DW_AT_lower_bound:
> +	  case DW_AT_return_addr:
> +	  case DW_AT_bit_stride:
> +	  case DW_AT_upper_bound:
> +	  case DW_AT_count:
> +	  case DW_AT_segment:
> +	  case DW_AT_static_link:
> +	  case DW_AT_use_location:
> +	  case DW_AT_allocated:
> +	  case DW_AT_associated:
> +	  case DW_AT_data_location:
> +	  case DW_AT_byte_stride:
> +	  case DW_AT_rank:
> +	  case DW_AT_call_value:
> +	  case DW_AT_call_target:
> +	  case DW_AT_call_target_clobbered:
> +	  case DW_AT_call_data_location:
> +	  case DW_AT_call_data_value:
> +	  case DW_AT_GNU_call_site_value:
> +	  case DW_AT_GNU_call_site_data_value:
> +	  case DW_AT_GNU_call_site_target:
> +	  case DW_AT_GNU_call_site_target_clobbered:
> +	    if (read_exprloc_low_mem_phase1 (dso, die, ptr, len))
> +	      return 1;
> +	  default:
> +	    break;
> +	  }
>  
>        return 0;
>      }
> @@ -3736,50 +3737,51 @@ checksum_die (DSO *dso, dw_cu_ref cu,
> dw_die_ref top_die, dw_die_ref die)
>        if (form == DW_FORM_block1)
>  	{
>  	  /* Old DWARF uses blocks instead of exprlocs.  */
> -	  switch (t->attr[i].attr)
> -	    {
> -	    case DW_AT_frame_base:
> -	    case DW_AT_location:
> -	    case DW_AT_data_member_location:
> -	    case DW_AT_vtable_elem_location:
> -	    case DW_AT_byte_size:
> -	    case DW_AT_bit_offset:
> -	    case DW_AT_bit_size:
> -	    case DW_AT_string_length:
> -	    case DW_AT_lower_bound:
> -	    case DW_AT_return_addr:
> -	    case DW_AT_bit_stride:
> -	    case DW_AT_upper_bound:
> -	    case DW_AT_count:
> -	    case DW_AT_segment:
> -	    case DW_AT_static_link:
> -	    case DW_AT_use_location:
> -	    case DW_AT_allocated:
> -	    case DW_AT_associated:
> -	    case DW_AT_data_location:
> -	    case DW_AT_byte_stride:
> -	    case DW_AT_rank:
> -	    case DW_AT_call_value:
> -	    case DW_AT_call_target:
> -	    case DW_AT_call_target_clobbered:
> -	    case DW_AT_call_data_location:
> -	    case DW_AT_call_data_value:
> -	    case DW_AT_GNU_call_site_value:
> -	    case DW_AT_GNU_call_site_data_value:
> -	    case DW_AT_GNU_call_site_target:
> -	    case DW_AT_GNU_call_site_target_clobbered:
> -	      if (die->die_ck_state != CK_BAD)
> -		{
> -		  s = t->attr[i].attr;
> -		  die->u.p1.die_hash
> -		    = iterative_hash_object (s, die->u.p1.die_hash);
> -		}
> -	      if (read_exprloc (dso, die, ptr, len, NULL))
> -		return 1;
> -	      handled = true;
> -	    default:
> -	      break;
> -	    }
> +	  if (cu->cu_version < 4)
> +	    switch (t->attr[i].attr)
> +	      {
> +	      case DW_AT_frame_base:
> +	      case DW_AT_location:
> +	      case DW_AT_data_member_location:
> +	      case DW_AT_vtable_elem_location:
> +	      case DW_AT_byte_size:
> +	      case DW_AT_bit_offset:
> +	      case DW_AT_bit_size:
> +	      case DW_AT_string_length:
> +	      case DW_AT_lower_bound:
> +	      case DW_AT_return_addr:
> +	      case DW_AT_bit_stride:
> +	      case DW_AT_upper_bound:
> +	      case DW_AT_count:
> +	      case DW_AT_segment:
> +	      case DW_AT_static_link:
> +	      case DW_AT_use_location:
> +	      case DW_AT_allocated:
> +	      case DW_AT_associated:
> +	      case DW_AT_data_location:
> +	      case DW_AT_byte_stride:
> +	      case DW_AT_rank:
> +	      case DW_AT_call_value:
> +	      case DW_AT_call_target:
> +	      case DW_AT_call_target_clobbered:
> +	      case DW_AT_call_data_location:
> +	      case DW_AT_call_data_value:
> +	      case DW_AT_GNU_call_site_value:
> +	      case DW_AT_GNU_call_site_data_value:
> +	      case DW_AT_GNU_call_site_target:
> +	      case DW_AT_GNU_call_site_target_clobbered:
> +		if (die->die_ck_state != CK_BAD)
> +		  {
> +		    s = t->attr[i].attr;
> +		    die->u.p1.die_hash
> +		      = iterative_hash_object (s, die->u.p1.die_hash);
> +		  }
> +		if (read_exprloc (dso, die, ptr, len, NULL))
> +		  return 1;
> +		handled = true;
> +	      default:
> +		break;
> +	      }
>  	  ptr += len;
>  	}
>        else if (form == DW_FORM_exprloc)
> @@ -12392,7 +12394,7 @@ write_die (unsigned char *ptr, dw_cu_ref cu,
> dw_die_ref die,
>  	  ptr += inptr - orig_ptr;
>  
>  	  /* Old DWARF uses blocks instead of exprlocs.  */
> -	  if (form == DW_FORM_block1)
> +	  if (form == DW_FORM_block1 && cu->cu_version < 4)
>  	    switch (reft->attr[i].attr)
>  	      {
>  	      case DW_AT_frame_base:

  reply	other threads:[~2021-02-18 13:40 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-13 22:46 Mark Wielaard
2021-02-18 13:40 ` Mark Wielaard [this message]
2021-02-18 14:09   ` Jakub Jelinek
2021-02-18 16:18     ` Mark Wielaard
2021-02-18 16:59       ` Jakub Jelinek
2021-02-18 17:32         ` Jakub Jelinek
2021-02-18 20:01         ` Mark Wielaard
2021-02-18 20:06           ` Jakub Jelinek
2021-02-18 21:17             ` Mark Wielaard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3fd1ebde0c9e1b8cbe09ea858a3e0f0a84af44b4.camel@klomp.org \
    --to=mark@klomp.org \
    --cc=dwz@sourceware.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).