public inbox for ecos-cvs@sourceware.org
help / color / mirror / Atom feed
* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-09-04  5:50 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-09-04  5:50 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-09-04 05:50:28

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/include: plf_io.h 

Log message:
	* include/plf_io.h: Added definitions for devices
	that has a second flash controller. Thus far only the
	at91sam7x512 is supported.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2009-06-13 15:02 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2009-06-13 15:02 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2009-06-13 15:02:30

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/include: 
	                                                 hal_platform_setup.h 
	                                                 plf_io.h 

Log message:
	* Fix the the problem of switching the PCM-settings if
	the PCM is already up. And improve the flash-controller
	programming.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-11-03  8:40 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-11-03  8:40 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-11-03 08:40:02

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
	packages/hal/arm/at91/at91sam7s/current/include: 
	                                                 hal_platform_ints.h 
	                                                 plf_io.h 
Added files:
	packages/hal/arm/at91/at91sam7s/current/include/pkgconf: 
	                                                         mlt_arm_at91sam7s512_rom.h 
	                                                         mlt_arm_at91sam7s512_rom.ldi 
	                                                         mlt_arm_at91sam7se256_rom.h 
	                                                         mlt_arm_at91sam7se256_rom.ldi 
	                                                         mlt_arm_at91sam7se32_rom.h 
	                                                         mlt_arm_at91sam7se32_rom.ldi 
	                                                         mlt_arm_at91sam7se512_rom.h 
	                                                         mlt_arm_at91sam7se512_rom.ldi 

Log message:
	* cdl/hal_arm_at91sam7s.cdl
	* include/hal_platform_ints.h
	* include/plf_io.h
	* include/var_io.h: Add support for AT91SAM7SE
	* cdl/hal_arm_at91sam7s.cdl: Allow external clock input to be up
	to 50Mhz, but the crystal is limited to 30MHz.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-10-19 14:51 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-10-19 14:51 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-10-19 14:51:33

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 

Log message:
	* cdl/hal_arm_at91sam7s.cdl: Fix calculation of RTC period. The TC
	uses a different divider as the PIT.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-09-04  6:10 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-09-04  6:10 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-09-04 06:10:22

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 

Log message:
	* cdl/hal_arm_at91sam7s.cdl: Set MOR OSCCOUNT and PLL Count to
	values suggests by Atmel. This should make the startup stable for
	all devices


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-09-02  5:37 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-09-02  5:37 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-09-02 05:37:51

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
	packages/hal/arm/at91/at91sam7s/current/include: 
	                                                 hal_platform_setup.h 

Log message:
	* cdl/hal_arm_at91sam7s.cdl: CDL for the MOR OSCCOUNT and
	PLLR PLLCOUNT.
	* include/hal_platform_setup.h: Turned the MOR OSCCOUNT
	and the PLLR PLLCOUNT setup into CLD configurable
	variables to allow a more flexible clock setup.
	* include/hal_platform_setup.h: Added setup code for devices
	that has a second flash controller i.e. the 512 devices


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-08-14 18:42 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-08-14 18:42 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-08-14 18:42:49

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/include: plf_io.h 

Log message:
	* include/plf_io.h: removed AT91_SPI_MR_MODFDIS, AT91_WSTC
	(AT91_WDTC), AT91_AIC because already in var_io.h. Fixed typo.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-05-11 12:57 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-05-11 12:57 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-05-11 12:57:43

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
	packages/hal/arm/at91/at91sam7s/current/include: 
	                                                 hal_platform_setup.h 

Log message:
	* cdl/hal_arm_at91sam7s.cdl: CDL for crystal vs clock signal.
	* include/hal_platform_setup.h: Rework flash wait states to remove
	redundant code when running at > 60MHz. Support clock signal input
	when starting the main clock.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-05-01 10:50 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-05-01 10:50 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-05-01 10:50:27

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
Added files:
	packages/hal/arm/at91/at91sam7s/current/include/pkgconf: 
	                                                         mlt_arm_at91sam7x512_rom.h 
	                                                         mlt_arm_at91sam7x512_rom.ldi 

Log message:
	* include/pkgconf/mlt_arm_at91sam7x512_rom.{h|ldi}: Added the
	memory layout files to support the at91sam7x512
	* cdl/hal_arm_at91s.cdl: Added the configuration options to
	support the at91sam7x512


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2008-04-23  8:17 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2008-04-23  8:17 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2008-04-23 08:17:44

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/include: 
	                                                 hal_platform_setup.h 

Log message:
	* include/hal_platform_setup.h: Fix setting the flash wait states
	when the clock is running faster than 60MHz. r0 was undefined
	causing a data abort.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2007-03-26 10:42 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2007-03-26 10:42 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2007-03-26 11:42:44

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 

Log message:
	* cdl/hal_arm_at91sam7s.cdl: SAM7X and SAM7XC have a CAN bus
	controller.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2007-03-05 19:09 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2007-03-05 19:09 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2007-03-05 19:09:02

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/include: plf_io.h 
	packages/hal/arm/at91/at91sam7s/current/src: at91sam7s_misc.c 

Log message:
	* include/plf_io.h
	* src/at91sam7s_misc.c
	Added code to initialise the platform ethernet hardware if need be


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2007-01-07 15:22 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2007-01-07 15:22 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2007-01-07 15:22:52

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 

Log message:
	* cdl/hal_arm_at91sam7s.cdl Moved HAL_PLATFORM_XXX defines and
	definition of platform header file (CYGBLD_HAL_PLATFORM_H) from
	package CYGPKG_HAL_ARM_AT91SAM7 into board specific packages.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-09-09 13:26 jlarmour
  0 siblings, 0 replies; 22+ messages in thread
From: jlarmour @ 2006-09-09 13:26 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	jlarmour@sourceware.org	2006-09-09 13:26:05

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/include: plf_io.h 

Log message:
	Revert last patch - obsoleted by a different patch.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-09-07 12:11 jlarmour
  0 siblings, 0 replies; 22+ messages in thread
From: jlarmour @ 2006-09-07 12:11 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	jlarmour@sourceware.org	2006-09-07 12:11:22

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/include: plf_io.h 

Log message:
	* include/plf_io.h: Added definition for SPI Mode Failure Disable bit
	in the SPI Mode register.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-06-02 18:15 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2006-06-02 18:15 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2006-06-02 18:15:29

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
	packages/hal/arm/at91/at91sam7s/current/include: 
	                                                 hal_platform_ints.h 
	                                                 plf_io.h 
	packages/hal/arm/at91/at91sam7s/current/include/pkgconf: 
	                                                         mlt_arm_at91sam7s128_rom.ldi 
	                                                         mlt_arm_at91sam7s256_rom.ldi 
	                                                         mlt_arm_at91sam7s32_rom.ldi 
	                                                         mlt_arm_at91sam7s64_rom.ldi 
	packages/hal/arm/at91/at91sam7s/current/src: at91sam7s_misc.c 
Added files:
	packages/hal/arm/at91/at91sam7s/current/include/pkgconf: 
	                                                         mlt_arm_at91sam7x128_rom.h 
	                                                         mlt_arm_at91sam7x128_rom.ldi 
	                                                         mlt_arm_at91sam7x256_rom.h 
	                                                         mlt_arm_at91sam7x256_rom.ldi 

Log message:
	* cdl/hal_arm_at91sam7s.cdl: Implement the SPI bus 1 interface for
	the SAM7X and SAM7XC.
	* include/plf_io.h: Add SPI DMA registers.
	include/pkgconf/mlt_arm_at91sam7x128_rom.{h|ldi}
	include/pkgconf/mlt_arm_at91sam7x256_rom.{h|ldi}: Linker files
	for AT91SAM7X processor.
	* src/at91sam7s_misc.c: Use the AT91 generic PIO manipulation
	macros. Move the LED function out into the board specific HAL
	package.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-04-08 14:53 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2006-04-08 14:53 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2006-04-08 14:53:43

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
	packages/hal/arm/at91/at91sam7s/current/include/pkgconf: 
	                                                         mlt_arm_at91sam7s128_rom.ldi 
	                                                         mlt_arm_at91sam7s256_rom.ldi 
	                                                         mlt_arm_at91sam7s32_rom.ldi 
	                                                         mlt_arm_at91sam7s64_rom.ldi 

Log message:
	* cdl/hal_arm_at91sam7s.cdl:
	* include/pkgconf/mlt_arm_at91sam7s32_rom.ldi:
	* include/pkgconf/mlt_arm_at91sam7s64_rom.ldi:
	* include/pkgconf/mlt_arm_at91sam7s128_rom.ldi:
	* include/pkgconf/mlt_arm_at91sam7s267_rom.ldi:
	Allow CDL to control where in flash the image is placed.
	
	* cdl/hal_arm_at91sam7s.cdl: Implement the USB interface when chip
	has the device.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-03-13  7:48 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2006-03-13  7:48 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2006-03-13 07:48:20

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
	packages/hal/arm/at91/at91sam7s/current/include: plf_io.h 
	packages/hal/arm/at91/at91sam7s/current/src: at91sam7s_misc.c 

Log message:
	* hal_arm_at91sam7s.cdl: Change the PLL-defaults so that 96MHz is
	generated so that the USB does work.
	* cdl/hal_arm_at91sam7s.cdl: Set the debug UART as the default
	channel and fix some dodge spelling.
	* src/at91sam7s_misc.c (hal_plf_hardware_init): Enable the Debug UART
	pins for output and control by the device.
	* include/plf_io.h: Define USART2 to be the debug UART.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-03-01 20:43 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2006-03-01 20:43 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2006-03-01 20:43:18

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
	packages/hal/arm/at91/at91sam7s/current/include: plf_io.h 
	packages/hal/arm/at91/at91sam7s/current/src: at91sam7s_misc.c 

Log message:
	* cdl/hal_arm_at91sam7s.cdl: Change the crystal frequency.  The
	numbers printed on top of the crystal are misleading. It has a
	18.432MHz crystal, not 20MHz. This error when combined with the
	previous fix to the PLL made the serial baud rate wrong.  Change
	the multiplier and divisor to achieve about the same CPU clock,
	which should be USB compatible.
	* src/at91sam7s_misc.c (hal_at91_us_baud): Need the same PLL fix
	when calculating the baud rate dynamically.
	* include/plf_io.h: Add the Programmable Clock Output registers.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-02-28 15:35 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2006-02-28 15:35 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2006-02-28 15:35:23

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/include: 
	                                                 hal_platform_setup.h 

Log message:
	* include/hal_platform_setup.h: Fix the PLL multiplier settings


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-02-25 14:20 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2006-02-25 14:20 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2006-02-25 14:20:19

Modified files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/misc: redboot_RAM.ecm 
	                                              redboot_ROM.ecm 

Log message:
	* misc/redboot_R[AO]M.ecm: Disable FIS and fconfig, enable
	loading directly into flash with the load command.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* ecos/packages/hal/arm/at91/at91sam7s/current C ...
@ 2006-02-19 20:32 asl
  0 siblings, 0 replies; 22+ messages in thread
From: asl @ 2006-02-19 20:32 UTC (permalink / raw)
  To: ecos-cvs

CVSROOT:	/cvs/ecos
Module name:	ecos
Changes by:	asl@sourceware.org	2006-02-19 20:32:25

Added files:
	packages/hal/arm/at91/at91sam7s/current: ChangeLog 
	packages/hal/arm/at91/at91sam7s/current/cdl: 
	                                             hal_arm_at91sam7s.cdl 
	packages/hal/arm/at91/at91sam7s/current/include: 
	                                                 hal_platform_ints.h 
	                                                 hal_platform_setup.h 
	                                                 plf_io.h 
	packages/hal/arm/at91/at91sam7s/current/include/pkgconf: 
	                                                         mlt_arm_at91sam7s128_rom.h 
	                                                         mlt_arm_at91sam7s128_rom.ldi 
	                                                         mlt_arm_at91sam7s256_rom.h 
	                                                         mlt_arm_at91sam7s256_rom.ldi 
	                                                         mlt_arm_at91sam7s32_rom.h 
	                                                         mlt_arm_at91sam7s32_rom.ldi 
	                                                         mlt_arm_at91sam7s64_rom.h 
	                                                         mlt_arm_at91sam7s64_rom.ldi 
	packages/hal/arm/at91/at91sam7s/current/misc: redboot_RAM.ecm 
	                                              redboot_ROM.ecm 
	packages/hal/arm/at91/at91sam7s/current/src: at91sam7s_misc.c 

Log message:
	2006-01-01  Oliver Munz <munz@speag.ch>
	Andrew Lunn <andrew.lunn@ascom.ch>
	
	* cdl/hal_arm_at91sam7s.cdl:
	* include/hal_platform_ints.h:
	* include/hal_platform_setup.h:
	* include/plf_io.h:
	* include/pkgconf/mlt_arm_at91sam7s256_rom.h:
	* include/pkgconf/mlt_arm_at91sam7s256_rom.ldi:
	* include/pkgconf/mlt_arm_at91sam7s128_rom.h:
	* include/pkgconf/mlt_arm_at91sam7s128_rom.ldi:
	* include/pkgconf/mlt_arm_at91sam7s64_rom.h:
	* include/pkgconf/mlt_arm_at91sam7s64_rom.ldi:
	* include/pkgconf/mlt_arm_at91sam7s32_rom.h:
	* include/pkgconf/mlt_arm_at91sam7s32_rom.ldi:
	* src/at91sam7s_misc.c:
	* misc/redboot_ROM.ecm:
	* misc/redboot_RAM.ecm:
	* ChangeLog: First import of a hal for the AT91SAM7S family.


^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2009-06-13 15:02 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-09-04  5:50 ecos/packages/hal/arm/at91/at91sam7s/current C asl
  -- strict thread matches above, loose matches on Subject: below --
2009-06-13 15:02 asl
2008-11-03  8:40 asl
2008-10-19 14:51 asl
2008-09-04  6:10 asl
2008-09-02  5:37 asl
2008-08-14 18:42 asl
2008-05-11 12:57 asl
2008-05-01 10:50 asl
2008-04-23  8:17 asl
2007-03-26 10:42 asl
2007-03-05 19:09 asl
2007-01-07 15:22 asl
2006-09-09 13:26 jlarmour
2006-09-07 12:11 jlarmour
2006-06-02 18:15 asl
2006-04-08 14:53 asl
2006-03-13  7:48 asl
2006-03-01 20:43 asl
2006-02-28 15:35 asl
2006-02-25 14:20 asl
2006-02-19 20:32 asl

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).