ecos STM32 redboot.bin download issue

ecos STM32 redboot.bin download issue

[smolugu]

Hi everybody,
I am trying to load redboot.bin to STM32 flash through
FlashLoaderdemonstrator.exe but I am using Linux PC as host, I tried
wine(tools supports to run windows application on linux) but I am getting
problem with that tool.

1) Is there Linux version FlashLoaddemonstrator is available?
2)If not are there any other ways through which I can download to
flash?Please suggest me,If you have some idea.

thanks
sridahr
-- 
View this message in context: http://www.nabble.com/ecos-STM32-redboot.bin-download-issue-tp25496851p25496851.html
Sent from the Sourceware - ecos-devel mailing list archive at Nabble.com.

Re: ecos STM32 redboot.bin download issue

[kishore Srimat]

Hi Sridhar,

As far as I know there is no Flash loader demonstrator for Linux. If
you are using Keil or IAR debugger to Flash the App however they all
use windows platform.

Just general steps if you happen to run on windows:

  1.Change the boot mode switches to boot from System Memory. The
      switches are to the bottom right of the STM32 device. The left
      switch is Boot 0 and should be "1" or up, and Boot 1 (right
      switch) should be "0" or down.
   2. Connect the serial cable between USART1 on the STM32 board and the
      PC's COM port.
   3. Open Flash Loader and Select the correct COM "Port Name" in the
drop down box, the other
      default settings should be fine.
   4. Once downloaded, change the Boot 0 switch (the left one) from a
"1" (up) to "0"
      (down). Boot 1 switch (right one) should remain in the "0"
      position. Power the board back up and the application code
should be running properly.

Remember to reset the board every time you change the switch.

Regards
Kishore Srimat



On Thu, Sep 17, 2009 at 5:12 PM, smolugu <asksri@indiatimes.com> wrote:
>
> Hi everybody,
> I am trying to load redboot.bin to STM32 flash through
> FlashLoaderdemonstrator.exe but I am using Linux PC as host, I tried
> wine(tools supports to run windows application on linux) but I am getting
> problem with that tool.
>
> 1) Is there Linux version FlashLoaddemonstrator is available?
> 2)If not are there any other ways through which I can download to
> flash?Please suggest me,If you have some idea.
>
> thanks
> sridahr
> --
> View this message in context: http://www.nabble.com/ecos-STM32-redboot.bin-download-issue-tp25496851p25496851.html
> Sent from the Sourceware - ecos-devel mailing list archive at Nabble.com.
>
>

Re: ecos STM32 redboot.bin download issue

[yuvraj dodia]

Hi Sridahr,

i am using OLIMEX JTAG and OpenOCD Env in my FC3 to load redboot.bin and my  applicaiton to STM32 Kit. plz refer below link.

http://www.openhardware.net/Embedded_ARM/OpenOCD_JTAG/

i hope this will helps you.

Thanks
Yuvraj Dodia

--- On Fri, 18/9/09, smolugu <asksri@indiatimes.com> wrote:

> From: smolugu <asksri@indiatimes.com>
> Subject: ecos STM32 redboot.bin download issue
> To: ecos-devel@ecos.sourceware.org
> Date: Friday, 18 September, 2009, 5:42 AM
> 
> Hi everybody,
> I am trying to load redboot.bin to STM32 flash through
> FlashLoaderdemonstrator.exe but I am using Linux PC as
> host, I tried
> wine(tools supports to run windows application on linux)
> but I am getting
> problem with that tool.
> 
> 1) Is there Linux version FlashLoaddemonstrator is
> available?
> 2)If not are there any other ways through which I can
> download to
> flash?Please suggest me,If you have some idea.
> 
> thanks
> sridahr
> -- 
> View this message in context: http://www.nabble.com/ecos-STM32-redboot.bin-download-issue-tp25496851p25496851.html
> Sent from the Sourceware - ecos-devel mailing list archive
> at Nabble.com.
> 
> 


      From cricket scores to your friends. Try the Yahoo! India Homepage! http://in.yahoo.com/trynew