* AT91SAM7A1 eCos support
@ 2010-02-07 9:47 Yasser Nour El-Din
0 siblings, 0 replies; only message in thread
From: Yasser Nour El-Din @ 2010-02-07 9:47 UTC (permalink / raw)
To: ecos-devel
Hi all,
I have now an AT91SAM7A1-EK board, and i'm trying to run eCos
application on it, But i found no HAL support for AT91SAM7A1, i tried
to use AT91SAM7S HAL but i found that there is a big difference
between AT91SAM7S and AT91SAM7A despite that they are from the same
family !!
For example, AT91SAM7A register bases for AT91SAM7A is toally
different from that of SAM7S, also the bit fields in registers. Also
AT91SAM7A has a Clock Manager registers that control PLL and clock but
in AT91SAM7S series this functionality is in the PMC (Power Management
Controller).
I saw on the mailing list that a while ago there are developers had
already tried to port eCos to AT91SAM7A1/2, So if some one has already
a patch or the HAL folder for AT91SAM7A1 i will really appreciate if
he could send it to me. I also know that AT91SAM7A2 is similar to
AT91SAM7A1 so AT91SAM7A2 HAL or a patch will be OK also and i will
made the small modifications to AT91SAM7A1 if needed.
Thanks in adavnce
-
Yasser Nour El-Din
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-02-07 9:47 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-02-07 9:47 AT91SAM7A1 eCos support Yasser Nour El-Din
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).