* [ECOS] EDOSK2674 serial tests
@ 2003-11-05 8:16 Uwe Kindler
0 siblings, 0 replies; only message in thread
From: Uwe Kindler @ 2003-11-05 8:16 UTC (permalink / raw)
To: ecos-discuss
Hello,
i finished serial driver development for the the new EDOSK2674 board and
would like to know
if I have to change somethin within ser_test_protocol.inl in order to run
the serial tests on the
EDOSK2674 board. And do I have to care about the device name if I would like
to run the serial
tests? At the moment I use"/dev/ser2".
At the moment i get the following results:
serial1 - works fine
serial2 - works fine only if ser_filter is used (but should work without
filter according to documentation)
serial3 - "NOT APPLICABLE: no host side harness dectect"
So do I have do change something in ser_test_protocol.inl or do I have to
use a special device name?
Best Regards, Uwe
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-11-05 8:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-05 8:16 [ECOS] EDOSK2674 serial tests Uwe Kindler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).