* [ECOS] port to SH3 7729RSE01 board
@ 2003-04-19 9:50 Campbell Family
2003-04-22 17:37 ` Jonathan Larmour
0 siblings, 1 reply; 2+ messages in thread
From: Campbell Family @ 2003-04-19 9:50 UTC (permalink / raw)
To: ecos-discuss
I'm new to eCos and to the SH3. I am trying to use the existing eCos
platform for the 77x9SE01 to create a platform for the 7729RSE01. The 7729R
runs at a faster speed than the 7709/7729, but the boards are otherwise
identical. I compared the source code for the Hitachi-supplied ROM monitors
for both boards, and just found these differences: the setting in one of the
wait state registers, a WDT setup register setting and the frequency control
register setting.
I created a new eCos platform (using eCos 2.0 on Linux) with these changes
and was able to build and download a RedBoot image in Motorola-S format
sucessfully, but I can't get Redboot to work (no boot-up message broadcast
out the serial SCIF port on reset). Any ideas about what I may have missed?
Thanks in advance for any insights.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ECOS] port to SH3 7729RSE01 board
2003-04-19 9:50 [ECOS] port to SH3 7729RSE01 board Campbell Family
@ 2003-04-22 17:37 ` Jonathan Larmour
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Larmour @ 2003-04-22 17:37 UTC (permalink / raw)
To: Campbell Family; +Cc: ecos-discuss
Campbell Family wrote:
> I'm new to eCos and to the SH3. I am trying to use the existing eCos
> platform for the 77x9SE01 to create a platform for the 7729RSE01. The 7729R
> runs at a faster speed than the 7709/7729, but the boards are otherwise
> identical. I compared the source code for the Hitachi-supplied ROM monitors
> for both boards, and just found these differences: the setting in one of the
> wait state registers, a WDT setup register setting and the frequency control
> register setting.
>
> I created a new eCos platform (using eCos 2.0 on Linux) with these changes
> and was able to build and download a RedBoot image in Motorola-S format
> sucessfully, but I can't get Redboot to work (no boot-up message broadcast
> out the serial SCIF port on reset). Any ideas about what I may have missed?
Not off-hand apart from obviously questioning whether there isn't really
some other difference ;-). If you've got LEDs on your board you can
toggle, you could try and use those to see how far through the startup it
gets.
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
--[ "You can complain because roses have thorns, or you ]--
--[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-04-22 17:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-04-19 9:50 [ECOS] port to SH3 7729RSE01 board Campbell Family
2003-04-22 17:37 ` Jonathan Larmour
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).